2023-06-05 20:56:06 -05:00
2023-06-26 14:59:08 -05:00
# ratgdo for ESPHome
2023-06-05 11:48:15 -05:00
2023-06-26 14:59:08 -05:00
This is a port of the ratgdo software for the v2 board to ESPHome.
2023-06-05 11:48:15 -05:00
2023-06-13 13:05:32 -10:00
[Visit the github.io page to purchase boards ](https://paulwieland.github.io/ratgdo/#order )
2023-06-05 11:48:15 -05:00
2023-06-13 13:05:02 -10:00
This project is not affiliated with ratgdo or Paul Wieland. Please buy his boards to support his excellent work.
2023-06-05 11:48:15 -05:00
2023-06-26 14:50:06 -05:00
## Moving from stock ratgdo
- Use the [`Logs & Console` ](https://paulwieland.github.io/ratgdo/flash.html ) to view and make note of the current rolling code
- Flash the new ESPHome based firmware using the [Web Installer ](https://esphome-ratgdo.github.io/esphome-ratgdo/ )
- Use the `number` entity in Home Assistant or the built-in ESPHome web-server to set the rolling code.
< img width = "560" alt = "number_entity" src = "https://github.com/ESPHome-RATGDO/esphome-ratgdo/assets/663432/e177029e-f42f-46a8-a87a-81fa04caaa57" >
# First use
The ESPHome firmware will allow you to open the door to any position after calibration. To calibrate the door, open and close it once without stopping.
< img width = "560" alt = "position_demo" src = "https://github.com/ESPHome-RATGDO/esphome-ratgdo/assets/663432/22a9873e-67bb-4b2f-bb32-70047cfe666d" >
2023-06-07 17:37:05 -05:00
# ESPHome config
2023-06-13 11:41:30 -10:00
- [ESPHome config for v2 board with ESP8266 D1 Mini lite ](https://github.com/ESPHome-RATGDO/esphome-ratgdo/blob/main/static/v2board_esp8266_d1_mini_lite.yaml )
2023-06-17 09:50:54 -05:00
- [ESPHome config for v2 board with ESP32 D1 Mini ](https://github.com/ESPHome-RATGDO/esphome-ratgdo/blob/main/static/v2board_esp32_d1_mini.yaml )
2023-06-13 11:41:30 -10:00
- [Web Installer ](https://esphome-ratgdo.github.io/esphome-ratgdo/ )
2023-06-10 10:32:13 -05:00
