chore: add more v1 mappings
This commit is contained in:
J. Nick Koston
Marius Muja
parent
4aad26a710
commit
10a6a5d1a7
|
|
@ -0,0 +1,236 @@
|
|||
---
|
||||
|
||||
external_components:
|
||||
- source:
|
||||
type: git
|
||||
url: https://github.com/ratgdo/esphome-ratgdo
|
||||
ref: sec_plus_v1
|
||||
refresh: 1s
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5s
|
||||
|
||||
ratgdo:
|
||||
id: ${id_prefix}
|
||||
input_gdo_pin: ${uart_rx_pin}
|
||||
output_gdo_pin: ${uart_tx_pin}
|
||||
input_obst_pin: ${input_obst_pin}
|
||||
protocol: secplusv1
|
||||
on_sync_failed:
|
||||
then:
|
||||
- homeassistant.service:
|
||||
service: persistent_notification.create
|
||||
data:
|
||||
title: "${friendly_name} sync failed"
|
||||
message: "Failed to communicate with garage opener on startup; Check the ${friendly_name} Rolling code counter number entity history and set the entity to one number larger than the largest value in history. [ESPHome devices](/config/devices/dashboard?domain=esphome)"
|
||||
notification_id: "esphome_ratgdo_${id_prefix}_sync_failed"
|
||||
|
||||
sensor:
|
||||
- platform: ratgdo
|
||||
id: ${id_prefix}_openings
|
||||
type: openings
|
||||
entity_category: diagnostic
|
||||
ratgdo_id: ${id_prefix}
|
||||
name: "Openings"
|
||||
unit_of_measurement: "openings"
|
||||
icon: mdi:open-in-app
|
||||
|
||||
lock:
|
||||
- platform: ratgdo
|
||||
id: ${id_prefix}_lock_remotes
|
||||
ratgdo_id: ${id_prefix}
|
||||
name: "Lock remotes"
|
||||
|
||||
switch:
|
||||
- platform: gpio
|
||||
id: "${id_prefix}_status_door"
|
||||
internal: true
|
||||
pin:
|
||||
number: ${status_door_pin} # D0 output door status, HIGH for open, LOW for closed
|
||||
mode:
|
||||
output: true
|
||||
name: "Status door"
|
||||
entity_category: diagnostic
|
||||
- platform: gpio
|
||||
id: "${id_prefix}_status_obstruction"
|
||||
internal: true
|
||||
pin:
|
||||
number: ${status_obstruction_pin} # D8 output for obstruction status, HIGH for obstructed, LOW for clear
|
||||
mode:
|
||||
output: true
|
||||
name: "Status obstruction"
|
||||
entity_category: diagnostic
|
||||
|
||||
binary_sensor:
|
||||
- platform: ratgdo
|
||||
type: motion
|
||||
id: ${id_prefix}_motion
|
||||
ratgdo_id: ${id_prefix}
|
||||
name: "Motion"
|
||||
device_class: motion
|
||||
- platform: ratgdo
|
||||
type: obstruction
|
||||
id: ${id_prefix}_obstruction
|
||||
ratgdo_id: ${id_prefix}
|
||||
name: "Obstruction"
|
||||
device_class: problem
|
||||
on_press:
|
||||
- switch.turn_on: ${id_prefix}_status_obstruction
|
||||
on_release:
|
||||
- switch.turn_off: ${id_prefix}_status_obstruction
|
||||
- platform: ratgdo
|
||||
type: button
|
||||
id: ${id_prefix}_button
|
||||
ratgdo_id: ${id_prefix}
|
||||
name: "Button"
|
||||
entity_category: diagnostic
|
||||
- platform: ratgdo
|
||||
type: motor
|
||||
id: ${id_prefix}_motor
|
||||
ratgdo_id: ${id_prefix}
|
||||
name: "Motor"
|
||||
device_class: running
|
||||
entity_category: diagnostic
|
||||
- platform: gpio
|
||||
id: "${id_prefix}_dry_contact_open"
|
||||
pin:
|
||||
number: ${dry_contact_open_pin} # D5 dry contact for opening door
|
||||
inverted: true
|
||||
mode:
|
||||
input: true
|
||||
pullup: true
|
||||
name: "Dry contact open"
|
||||
entity_category: diagnostic
|
||||
filters:
|
||||
- delayed_on_off: 500ms
|
||||
on_press:
|
||||
- if:
|
||||
condition:
|
||||
binary_sensor.is_off: ${id_prefix}_dry_contact_close
|
||||
then:
|
||||
- cover.open: ${id_prefix}_garage_door
|
||||
- platform: gpio
|
||||
id: "${id_prefix}_dry_contact_close"
|
||||
pin:
|
||||
number: ${dry_contact_close_pin} # D6 dry contact for closing door
|
||||
inverted: true
|
||||
mode:
|
||||
input: true
|
||||
pullup: true
|
||||
name: "Dry contact close"
|
||||
entity_category: diagnostic
|
||||
filters:
|
||||
- delayed_on_off: 500ms
|
||||
on_press:
|
||||
- if:
|
||||
condition:
|
||||
binary_sensor.is_off: ${id_prefix}_dry_contact_open
|
||||
then:
|
||||
- cover.close: ${id_prefix}_garage_door
|
||||
- platform: gpio
|
||||
id: "${id_prefix}_dry_contact_light"
|
||||
pin:
|
||||
number: ${dry_contact_light_pin} # D3 dry contact for triggering light (no discrete light commands, so toggle only)
|
||||
inverted: true
|
||||
mode:
|
||||
input: true
|
||||
pullup: true
|
||||
name: "Dry contact light"
|
||||
entity_category: diagnostic
|
||||
filters:
|
||||
- delayed_on_off: 500ms
|
||||
on_press:
|
||||
- light.toggle: ${id_prefix}_light
|
||||
|
||||
number:
|
||||
- platform: ratgdo
|
||||
id: ${id_prefix}_rolling_code_counter
|
||||
type: rolling_code_counter
|
||||
entity_category: config
|
||||
ratgdo_id: ${id_prefix}
|
||||
name: "Rolling code counter"
|
||||
mode: box
|
||||
unit_of_measurement: "codes"
|
||||
|
||||
- platform: ratgdo
|
||||
id: ${id_prefix}_opening_duration
|
||||
type: opening_duration
|
||||
entity_category: config
|
||||
ratgdo_id: ${id_prefix}
|
||||
name: "Opening duration"
|
||||
unit_of_measurement: "s"
|
||||
|
||||
- platform: ratgdo
|
||||
id: ${id_prefix}_closing_duration
|
||||
type: closing_duration
|
||||
entity_category: config
|
||||
ratgdo_id: ${id_prefix}
|
||||
name: "Closing duration"
|
||||
unit_of_measurement: "s"
|
||||
|
||||
- platform: ratgdo
|
||||
id: ${id_prefix}_client_id
|
||||
type: client_id
|
||||
entity_category: config
|
||||
ratgdo_id: ${id_prefix}
|
||||
name: "Client ID"
|
||||
mode: box
|
||||
|
||||
cover:
|
||||
- platform: ratgdo
|
||||
id: ${id_prefix}_garage_door
|
||||
device_class: garage
|
||||
name: "Door"
|
||||
ratgdo_id: ${id_prefix}
|
||||
on_closed:
|
||||
- switch.turn_off: ${id_prefix}_status_door
|
||||
on_open:
|
||||
- switch.turn_on: ${id_prefix}_status_door
|
||||
|
||||
light:
|
||||
- platform: ratgdo
|
||||
id: ${id_prefix}_light
|
||||
name: "Light"
|
||||
ratgdo_id: ${id_prefix}
|
||||
|
||||
button:
|
||||
- platform: restart
|
||||
name: "Restart"
|
||||
- platform: safe_mode
|
||||
name: "Safe mode boot"
|
||||
entity_category: diagnostic
|
||||
|
||||
- platform: template
|
||||
id: ${id_prefix}_query_status
|
||||
entity_category: diagnostic
|
||||
name: "Query status"
|
||||
on_press:
|
||||
then:
|
||||
lambda: !lambda |-
|
||||
id($id_prefix).query_status();
|
||||
|
||||
- platform: template
|
||||
id: ${id_prefix}_query_openings
|
||||
name: "Query openings"
|
||||
entity_category: diagnostic
|
||||
on_press:
|
||||
then:
|
||||
lambda: !lambda |-
|
||||
id($id_prefix).query_openings();
|
||||
|
||||
- platform: template
|
||||
id: ${id_prefix}_sync
|
||||
name: "Sync"
|
||||
entity_category: diagnostic
|
||||
on_press:
|
||||
then:
|
||||
lambda: !lambda |-
|
||||
id($id_prefix).sync();
|
||||
|
||||
- platform: template
|
||||
id: ${id_prefix}_toggle_door
|
||||
name: "Toggle door"
|
||||
on_press:
|
||||
then:
|
||||
lambda: !lambda |-
|
||||
id($id_prefix).toggle_door();
|
||||
|
|
@ -26,13 +26,14 @@ esp8266:
|
|||
restore_from_flash: true
|
||||
|
||||
dashboard_import:
|
||||
package_import_url: github://ratgdo/esphome-ratgdo/v25iboard.yaml@main
|
||||
package_import_url: github://ratgdo/esphome-ratgdo/v25iboard_secplusv1.yaml@main
|
||||
|
||||
packages:
|
||||
remote_package:
|
||||
url: https://github.com/ratgdo/esphome-ratgdo
|
||||
files: [base.yaml]
|
||||
files: [base_secplusv1.yaml]
|
||||
refresh: 1s
|
||||
ref: sec_plus_v1
|
||||
|
||||
# Sync time with Home Assistant.
|
||||
time:
|
||||
|
|
|
|||
Loading…
Reference in New Issue