From 5518518f0150bc707b098b182508dd94a5e496ab Mon Sep 17 00:00:00 2001 From: "J. Nick Koston" Date: Tue, 12 Sep 2023 13:29:36 -0500 Subject: [PATCH] Update links --- README.md | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/README.md b/README.md index 3a9beaf..65a877b 100644 --- a/README.md +++ b/README.md @@ -5,8 +5,6 @@ This is a port of the ratgdo software for the v2 board to ESPHome. [Visit the github.io page to purchase boards](https://paulwieland.github.io/ratgdo/#order) -This project is not affiliated with ratgdo or Paul Wieland. Please buy his boards to support his excellent work. - ## Moving from stock ratgdo If you have not used the stock ratgdo firmware, and are starting with a fresh install of the ESPHome based firmware, [skip these steps](#fresh-install-when-the-stock-ratgdo-firmware-was-not-used-before). @@ -15,17 +13,17 @@ If you have not used the stock ratgdo firmware, and are starting with a fresh in - Flash the new ESPHome based firmware using the [Web Installer](https://esphome-ratgdo.github.io/esphome-ratgdo/) - Use the `number` entity in Home Assistant or the built-in ESPHome web-server to set the rolling code. -number_entity +number_entity ## Fresh install when the stock ratgdo firmware was not used before -- Flash the new ESPHome based firmware using the [Web Installer](https://esphome-ratgdo.github.io/esphome-ratgdo/) +- Flash the new ESPHome based firmware using the [Web Installer](https://ratgdo.github.io/esphome-ratgdo/) ## First use after adding to Home Assistant The ESPHome firmware will allow you to open the door to any position after calibration. To calibrate the door, open and close it once without stopping. -position_demo +position_demo ## Updating from versions older than 2023.07.07 @@ -33,8 +31,8 @@ When updating from older versions, save the rolling counter value and restore it ## ESPHome config -- [ESPHome config for v2 board with ESP8266 D1 Mini lite](https://github.com/ESPHome-RATGDO/esphome-ratgdo/blob/main/static/v2board_esp8266_d1_mini_lite.yaml) -- [ESPHome config for v2 board with ESP32 D1 Mini](https://github.com/ESPHome-RATGDO/esphome-ratgdo/blob/main/static/v2board_esp32_d1_mini.yaml) -- [Web Installer](https://esphome-ratgdo.github.io/esphome-ratgdo/) +- [ESPHome config for v2 board with ESP8266 D1 Mini lite](https://github.com/RATGDO/esphome-ratgdo/blob/main/static/v2board_esp8266_d1_mini_lite.yaml) +- [ESPHome config for v2 board with ESP32 D1 Mini](https://github.com/RATGDO/esphome-ratgdo/blob/main/static/v2board_esp32_d1_mini.yaml) +- [Web Installer](https://ratgdo.github.io/esphome-ratgdo/) ![Home Assistant Screen Shot](static/hass.png)