diff --git a/base.yaml b/base.yaml
index ddf6272..de1b250 100644
--- a/base.yaml
+++ b/base.yaml
@@ -73,7 +73,7 @@ switch:
     id: "${id_prefix}_status_door"
     internal: true
     pin:
-      number: ${status_door_pin}  # output door status, HIGH for open, LOW for closed
+      number: ${status_door_pin}  # D0 output door status, HIGH for open, LOW for closed
       mode:
         output: true
     name: "Status door"
@@ -82,7 +82,7 @@ switch:
     id: "${id_prefix}_status_obstruction"
     internal: true
     pin:
-      number: ${status_obstruction_pin}  # output for obstruction status, HIGH for obstructed, LOW for clear
+      number: ${status_obstruction_pin}  # D8 output for obstruction status, HIGH for obstructed, LOW for clear
       mode:
         output: true
     name: "Status obstruction"
@@ -128,7 +128,7 @@ binary_sensor:
   - platform: gpio
     id: "${id_prefix}_dry_contact_open"
     pin:
-      number: ${dry_contact_open_pin}  # dry contact for opening door
+      number: ${dry_contact_open_pin}  # D5 dry contact for opening door
       inverted: true
       mode:
         input: true
@@ -146,7 +146,7 @@ binary_sensor:
   - platform: gpio
     id: "${id_prefix}_dry_contact_close"
     pin:
-      number: ${dry_contact_close_pin}  # dry contact for closing door
+      number: ${dry_contact_close_pin}  # D6 dry contact for closing door
       inverted: true
       mode:
         input: true
@@ -164,7 +164,7 @@ binary_sensor:
   - platform: gpio
     id: "${id_prefix}_dry_contact_light"
     pin:
-      number: ${dry_contact_light_pin}  # dry contact for triggering light (no discrete light commands, so toggle only)
+      number: ${dry_contact_light_pin}  # D3 dry contact for triggering light (no discrete light commands, so toggle only)
       inverted: true
       mode:
         input: true
diff --git a/base_drycontact.yaml b/base_drycontact.yaml
deleted file mode 100644
index 60ab11f..0000000
--- a/base_drycontact.yaml
+++ /dev/null
@@ -1,95 +0,0 @@
----
-
-external_components:
-  - source:
-      # type: local
-      # path: components
-      type: git
-      url: https://github.com/ratgdo/esphome-ratgdo
-    refresh: 1s
-
-preferences:
-  flash_write_interval: 1min
-
-ratgdo:
-  id: ${id_prefix}
-  output_gdo_pin: ${uart_tx_pin}
-  input_obst_pin: ${input_obst_pin}
-  dry_contact_open_sensor: ${id_prefix}_dry_contact_open
-  dry_contact_close_sensor: ${id_prefix}_dry_contact_close
-  discrete_open_pin: ${discrete_open_pin}
-  discrete_close_pin: ${discrete_close_pin}
-  protocol: drycontact
-
-binary_sensor:
-  - platform: ratgdo
-    type: obstruction
-    id: ${id_prefix}_obstruction
-    ratgdo_id: ${id_prefix}
-    name: "Obstruction"
-    device_class: problem
-  - platform: gpio
-    id: "${id_prefix}_dry_contact_open"
-    pin:
-      number: ${dry_contact_open_pin}
-      inverted: true
-      mode:
-        input: true
-        pullup: true
-    name: "Open limit switch"
-    entity_category: diagnostic
-    filters:
-      - delayed_on_off: 500ms
-  - platform: gpio
-    id: "${id_prefix}_dry_contact_close"
-    pin:
-      number: ${dry_contact_close_pin}
-      inverted: true
-      mode:
-        input: true
-        pullup: true
-    name: "Close limit switch"
-    entity_category: diagnostic
-    filters:
-      - delayed_on_off: 500ms
-
-number:
-  - platform: ratgdo
-    id: ${id_prefix}_opening_duration
-    type: opening_duration
-    entity_category: config
-    ratgdo_id: ${id_prefix}
-    name: "Opening duration"
-    unit_of_measurement: "s"
-
-  - platform: ratgdo
-    id: ${id_prefix}_closing_duration
-    type: closing_duration
-    entity_category: config
-    ratgdo_id: ${id_prefix}
-    name: "Closing duration"
-    unit_of_measurement: "s"
-
-cover:
-  - platform: ratgdo
-    id: ${id_prefix}_garage_door
-    device_class: garage
-    name: "Door"
-    ratgdo_id: ${id_prefix}
-
-button:
-  - platform: restart
-    id: ${id_prefix}_restart
-    name: "Restart"
-  - platform: safe_mode
-    id: ${id_prefix}_safe_mode
-    name: "Safe mode boot"
-    entity_category: diagnostic
-
-  - platform: template
-    id: ${id_prefix}_toggle_door
-    name: "Toggle door"
-    on_press:
-      then:
-        lambda: !lambda |-
-          id($id_prefix).door_toggle();
\ No newline at end of file
diff --git a/components/ratgdo/__init__.py b/components/ratgdo/__init__.py
index 121a004..6b52ddc 100644
--- a/components/ratgdo/__init__.py
+++ b/components/ratgdo/__init__.py
@@ -3,7 +3,6 @@ import esphome.config_validation as cv
 import voluptuous as vol
 from esphome import automation, pins
 from esphome.const import CONF_ID, CONF_TRIGGER_ID
-from esphome.components import binary_sensor
 
 DEPENDENCIES = ["preferences"]
 MULTI_CONF = True
@@ -26,9 +25,6 @@ DEFAULT_INPUT_GDO = (
 CONF_INPUT_OBST = "input_obst_pin"
 DEFAULT_INPUT_OBST = "D7"  # D7 black obstruction sensor terminal
 
-CONF_DISCRETE_OPEN_PIN = "discrete_open_pin"
-CONF_DISCRETE_CLOSE_PIN = "discrete_close_pin"
-
 CONF_RATGDO_ID = "ratgdo_id"
 
 CONF_ON_SYNC_FAILED = "on_sync_failed"
@@ -40,22 +36,7 @@ PROTOCOL_SECPLUSV2 = "secplusv2"
 PROTOCOL_DRYCONTACT = "drycontact"
 SUPPORTED_PROTOCOLS = [PROTOCOL_SECPLUSV1, PROTOCOL_SECPLUSV2, PROTOCOL_DRYCONTACT]
 
-CONF_DRY_CONTACT_OPEN_SENSOR = "dry_contact_open_sensor"
-CONF_DRY_CONTACT_CLOSE_SENSOR = "dry_contact_close_sensor"
-CONF_DRY_CONTACT_SENSOR_GROUP = "dry_contact_sensor_group"
-
-def validate_protocol(config):
-    print("Validation")
-    if config.get(CONF_PROTOCOL, None) == PROTOCOL_DRYCONTACT and (CONF_DRY_CONTACT_CLOSE_SENSOR not in config or CONF_DRY_CONTACT_OPEN_SENSOR not in config):
-        raise cv.Invalid("dry_contact_close_sensor and dry_contact_open_sensor are required when using protocol drycontact")
-    if config.get(CONF_PROTOCOL, None) != PROTOCOL_DRYCONTACT and (CONF_DRY_CONTACT_CLOSE_SENSOR in config or CONF_DRY_CONTACT_OPEN_SENSOR in config):
-        raise cv.Invalid("dry_contact_close_sensor and dry_contact_open_sensor are only valid when using protocol drycontact")
-#    if config.get(CONF_PROTOCOL, None) == PROTOCOL_DRYCONTACT and CONF_DRY_CONTACT_OPEN_SENSOR not in config:
-#        raise cv.Invalid("dry_contact_open_sensor is required when using protocol drycontact")
-    return config    
-
-CONFIG_SCHEMA = cv.All(
-    cv.Schema(
+CONFIG_SCHEMA = cv.Schema(
     {
         cv.GenerateID(): cv.declare_id(RATGDO),
         cv.Optional(
@@ -67,24 +48,16 @@ CONFIG_SCHEMA = cv.All(
         cv.Optional(CONF_INPUT_OBST, default=DEFAULT_INPUT_OBST): cv.Any(
             cv.none, pins.gpio_input_pin_schema
         ),
-        cv.Optional(CONF_DISCRETE_OPEN_PIN): pins.gpio_output_pin_schema,
-        cv.Optional(CONF_DISCRETE_CLOSE_PIN): pins.gpio_output_pin_schema,
         cv.Optional(CONF_ON_SYNC_FAILED): automation.validate_automation(
             {
                 cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(SyncFailed),
             }
         ),
-        cv.Optional(CONF_PROTOCOL, default=PROTOCOL_SECPLUSV2): cv.All(vol.In(
+        cv.Optional(CONF_PROTOCOL, default=PROTOCOL_SECPLUSV2): vol.In(
             SUPPORTED_PROTOCOLS
-        )),
-        # cv.Inclusive(CONF_DRY_CONTACT_OPEN_SENSOR,CONF_DRY_CONTACT_SENSOR_GROUP): cv.use_id(binary_sensor.BinarySensor),
-        # cv.Inclusive(CONF_DRY_CONTACT_CLOSE_SENSOR,CONF_DRY_CONTACT_SENSOR_GROUP): cv.use_id(binary_sensor.BinarySensor),
-        cv.Optional(CONF_DRY_CONTACT_OPEN_SENSOR): cv.use_id(binary_sensor.BinarySensor),
-        cv.Optional(CONF_DRY_CONTACT_CLOSE_SENSOR): cv.use_id(binary_sensor.BinarySensor),
+        ),
     }
-    ).extend(cv.COMPONENT_SCHEMA),
-    validate_protocol,
-)
+).extend(cv.COMPONENT_SCHEMA)
 
 RATGDO_CLIENT_SCHMEA = cv.Schema(
     {
@@ -109,14 +82,6 @@ async def to_code(config):
         pin = await cg.gpio_pin_expression(config[CONF_INPUT_OBST])
         cg.add(var.set_input_obst_pin(pin))
 
-    if CONF_DRY_CONTACT_OPEN_SENSOR in config and config[CONF_DRY_CONTACT_OPEN_SENSOR]:
-        dry_contact_open_sensor = await cg.get_variable(config[CONF_DRY_CONTACT_OPEN_SENSOR])
-        cg.add(var.set_dry_contact_open_sensor(dry_contact_open_sensor))
-
-    if CONF_DRY_CONTACT_CLOSE_SENSOR in config and config[CONF_DRY_CONTACT_CLOSE_SENSOR]:
-        dry_contact_close_sensor = await cg.get_variable(config[CONF_DRY_CONTACT_CLOSE_SENSOR])
-        cg.add(var.set_dry_contact_close_sensor(dry_contact_close_sensor))
-
     for conf in config.get(CONF_ON_SYNC_FAILED, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
         await automation.build_automation(trigger, [], conf)
@@ -139,10 +104,3 @@ async def to_code(config):
     elif config[CONF_PROTOCOL] == PROTOCOL_DRYCONTACT:
         cg.add_define("PROTOCOL_DRYCONTACT")
     cg.add(var.init_protocol())
-
-    if CONF_DISCRETE_OPEN_PIN in config and config[CONF_DISCRETE_OPEN_PIN]:
-        pin = await cg.gpio_pin_expression(config[CONF_DISCRETE_OPEN_PIN])
-        cg.add(var.set_discrete_open_pin(pin))
-    if CONF_DISCRETE_CLOSE_PIN in config and config[CONF_DISCRETE_CLOSE_PIN]:
-        pin = await cg.gpio_pin_expression(config[CONF_DISCRETE_CLOSE_PIN])
-        cg.add(var.set_discrete_close_pin(pin))
\ No newline at end of file
diff --git a/components/ratgdo/dry_contact.cpp b/components/ratgdo/dry_contact.cpp
index 9860e16..5dc5a9d 100644
--- a/components/ratgdo/dry_contact.cpp
+++ b/components/ratgdo/dry_contact.cpp
@@ -5,7 +5,6 @@
 #include "esphome/core/gpio.h"
 #include "esphome/core/log.h"
 #include "esphome/core/scheduler.h"
-#include "esphome/components/gpio/binary_sensor/gpio_binary_sensor.h"
 
 namespace esphome {
 namespace ratgdo {
@@ -19,12 +18,6 @@ namespace ratgdo {
             this->scheduler_ = scheduler;
             this->tx_pin_ = tx_pin;
             this->rx_pin_ = rx_pin;
-            
-            this->open_limit_reached_ = 0;
-            this->last_open_limit_ = 0;
-            this->close_limit_reached_ = 0;
-            this->last_close_limit_ = 0;
-            this->door_state_ = DoorState::UNKNOWN;
         }
 
         void DryContact::loop()
@@ -38,43 +31,6 @@ namespace ratgdo {
 
         void DryContact::sync()
         {
-            ESP_LOG1(TAG, "Ignoring sync action");
-        }
-
-        void DryContact::set_open_limit(bool state)
-        {
-            ESP_LOGD(TAG, "Set open_limit_reached to %d", state);
-            this->last_open_limit_ = this->open_limit_reached_;
-            this->last_close_limit_ = false;
-            this->open_limit_reached_ = state;
-            this->send_door_state();
-        }
-
-        void DryContact::set_close_limit(bool state)
-        {
-            ESP_LOGD(TAG, "Set close_limit_reached to %d", state);
-            this->last_close_limit_ = this->close_limit_reached_;
-            this->last_open_limit_ = false;
-            this->close_limit_reached_ = state;
-            this->send_door_state();
-        }
-        
-        void DryContact::send_door_state(){
-            if(this->open_limit_reached_){
-                this->door_state_ = DoorState::OPEN;
-            }else if(this->close_limit_reached_){
-                this->door_state_ = DoorState::CLOSED;
-            }else if(!this->close_limit_reached_ && !this->open_limit_reached_){
-                if(this->last_close_limit_){
-                    this->door_state_ = DoorState::OPENING;
-                }
-
-                if(this->last_open_limit_){
-                    this->door_state_ = DoorState::CLOSING;
-                }
-            }
-
-            this->ratgdo_->received(this->door_state_);
         }
 
         void DryContact::light_action(LightAction action)
@@ -91,33 +47,14 @@ namespace ratgdo {
 
         void DryContact::door_action(DoorAction action)
         {
-            if (action == DoorAction::OPEN && this->door_state_ != DoorState::CLOSED) {
-                ESP_LOGW(TAG, "The door is not closed. Ignoring door action: %s", DoorAction_to_string(action));
+            if (action != DoorAction::TOGGLE) {
+                ESP_LOG1(TAG, "Ignoring door action: %s", DoorAction_to_string(action));
                 return;
             }
-            if (action == DoorAction::CLOSE && this->door_state_ != DoorState::OPEN) {
-                ESP_LOGW(TAG, "The door is not open. Ignoring door action: %s", DoorAction_to_string(action));
-                return;
-            }
-
             ESP_LOG1(TAG, "Door action: %s", DoorAction_to_string(action));
 
-            if (action == DoorAction::OPEN){
-                this->discrete_open_pin_->digital_write(1);
-                this->scheduler_->set_timeout(this->ratgdo_, "", 500, [=] {
-                    this->discrete_open_pin_->digital_write(0);
-                });
-            }
-
-            if (action == DoorAction::CLOSE){
-                this->discrete_close_pin_->digital_write(1);
-                this->scheduler_->set_timeout(this->ratgdo_, "", 500, [=] {
-                    this->discrete_close_pin_->digital_write(0);
-                });
-            }
-
-            this->tx_pin_->digital_write(1); // Single button control
-            this->scheduler_->set_timeout(this->ratgdo_, "", 500, [=] {
+            this->tx_pin_->digital_write(1);
+            this->scheduler_->set_timeout(this->ratgdo_, "", 200, [=] {
                 this->tx_pin_->digital_write(0);
             });
         }
diff --git a/components/ratgdo/dry_contact.h b/components/ratgdo/dry_contact.h
index 09362b6..99dd024 100644
--- a/components/ratgdo/dry_contact.h
+++ b/components/ratgdo/dry_contact.h
@@ -2,8 +2,6 @@
 
 #include "SoftwareSerial.h" // Using espsoftwareserial https://github.com/plerup/espsoftwareserial
 #include "esphome/core/optional.h"
-#include "esphome/core/gpio.h"
-#include "esphome/components/gpio/binary_sensor/gpio_binary_sensor.h"
 
 #include "callbacks.h"
 #include "observable.h"
@@ -19,7 +17,6 @@ namespace ratgdo {
     namespace dry_contact {
 
         using namespace esphome::ratgdo::protocol;
-        using namespace esphome::gpio;
 
         class DryContact : public Protocol {
         public:
@@ -32,21 +29,6 @@ namespace ratgdo {
             void light_action(LightAction action);
             void lock_action(LockAction action);
             void door_action(DoorAction action);
-            void set_open_limit(bool state);
-            void set_close_limit(bool state);
-            void send_door_state();
-
-            void set_discrete_open_pin(InternalGPIOPin* pin) { 
-                this->discrete_open_pin_ = pin;
-                this->discrete_open_pin_->setup();
-                this->discrete_open_pin_->pin_mode(gpio::FLAG_OUTPUT);
-            }
-
-            void set_discrete_close_pin(InternalGPIOPin* pin) {
-                this->discrete_close_pin_ = pin;
-                this->discrete_close_pin_->setup();
-                this->discrete_close_pin_->pin_mode(gpio::FLAG_OUTPUT);
-            }
 
             Result call(Args args);
 
@@ -57,18 +39,9 @@ namespace ratgdo {
 
             InternalGPIOPin* tx_pin_;
             InternalGPIOPin* rx_pin_;
-            InternalGPIOPin* discrete_open_pin_;
-            InternalGPIOPin* discrete_close_pin_;
 
             RATGDOComponent* ratgdo_;
             Scheduler* scheduler_;
-
-            DoorState door_state_;
-            bool open_limit_reached_;
-            bool last_open_limit_;
-            bool close_limit_reached_;
-            bool last_close_limit_;
-
         };
 
     } // namespace secplus1
diff --git a/components/ratgdo/protocol.h b/components/ratgdo/protocol.h
index 325c6ea..8202079 100644
--- a/components/ratgdo/protocol.h
+++ b/components/ratgdo/protocol.h
@@ -102,11 +102,6 @@ namespace ratgdo {
             virtual void dump_config();
 
             virtual void sync();
-            virtual void set_open_limit(bool);
-            virtual void set_close_limit(bool);
-
-            virtual void set_discrete_open_pin(InternalGPIOPin* pin);
-            virtual void set_discrete_close_pin(InternalGPIOPin* pin);
 
             virtual const Traits& traits() const;
 
diff --git a/components/ratgdo/ratgdo.cpp b/components/ratgdo/ratgdo.cpp
index eb26bf1..f65ae25 100644
--- a/components/ratgdo/ratgdo.cpp
+++ b/components/ratgdo/ratgdo.cpp
@@ -420,16 +420,6 @@ namespace ratgdo {
         this->protocol_->sync();
     }
 
-    void RATGDOComponent::set_open_limit(bool state)
-    {
-        this->protocol_->set_open_limit(state);
-    }
-
-    void RATGDOComponent::set_close_limit(bool state)
-    {
-        this->protocol_->set_close_limit(state);
-    }
-
     void RATGDOComponent::door_open()
     {
         if (*this->door_state == DoorState::OPENING) {
@@ -683,24 +673,5 @@ namespace ratgdo {
         this->learn_state.subscribe([=](LearnState state) { defer("learn_state", [=] { f(state); }); });
     }
 
-    void RATGDOComponent::set_dry_contact_open_sensor(esphome::gpio::GPIOBinarySensor* dry_contact_open_sensor)
-    {
-        dry_contact_open_sensor_ = dry_contact_open_sensor;
-        dry_contact_open_sensor_->add_on_state_callback([this](bool sensor_value)
-        {
-            this->set_open_limit(sensor_value);      
-        }
-        );
-    }
-    void RATGDOComponent::set_dry_contact_close_sensor(esphome::gpio::GPIOBinarySensor* dry_contact_close_sensor)
-    {
-        dry_contact_close_sensor_ = dry_contact_close_sensor;
-        dry_contact_close_sensor_->add_on_state_callback([this](bool sensor_value)
-        {
-            this->set_close_limit(sensor_value);
-        }
-        );
-    }
-
 } // namespace ratgdo
 } // namespace esphome
diff --git a/components/ratgdo/ratgdo.h b/components/ratgdo/ratgdo.h
index 2c9ac61..510f636 100644
--- a/components/ratgdo/ratgdo.h
+++ b/components/ratgdo/ratgdo.h
@@ -16,7 +16,6 @@
 #include "esphome/core/component.h"
 #include "esphome/core/hal.h"
 #include "esphome/core/preferences.h"
-#include "esphome/components/gpio/binary_sensor/gpio_binary_sensor.h"
 
 #include "callbacks.h"
 #include "macros.h"
@@ -92,12 +91,6 @@ namespace ratgdo {
         void set_input_gdo_pin(InternalGPIOPin* pin) { this->input_gdo_pin_ = pin; }
         void set_input_obst_pin(InternalGPIOPin* pin) { this->input_obst_pin_ = pin; }
 
-        void set_dry_contact_open_sensor(esphome::gpio::GPIOBinarySensor* dry_contact_open_sensor_);
-        void set_dry_contact_close_sensor(esphome::gpio::GPIOBinarySensor* dry_contact_close_sensor_);
-
-        void set_discrete_open_pin(InternalGPIOPin* pin){ this->protocol_->set_discrete_open_pin(pin); }
-        void set_discrete_close_pin(InternalGPIOPin* pin){ this->protocol_->set_discrete_close_pin(pin); }
-
         Result call_protocol(Args args);
 
         void received(const DoorState door_state);
@@ -152,8 +145,6 @@ namespace ratgdo {
         void query_status();
         void query_openings();
         void sync();
-        void set_open_limit(bool);
-        void set_close_limit(bool);
 
         // children subscriptions
         void subscribe_rolling_code_counter(std::function<void(uint32_t)>&& f);
@@ -183,8 +174,6 @@ namespace ratgdo {
         InternalGPIOPin* output_gdo_pin_;
         InternalGPIOPin* input_gdo_pin_;
         InternalGPIOPin* input_obst_pin_;
-        esphome::gpio::GPIOBinarySensor* dry_contact_open_sensor_;
-        esphome::gpio::GPIOBinarySensor* dry_contact_close_sensor_;
     }; // RATGDOComponent
 
 } // namespace ratgdo
diff --git a/static/index.html b/static/index.html
index d77e636..dc5c164 100644
--- a/static/index.html
+++ b/static/index.html
@@ -202,8 +202,8 @@
 
         <label>
           <img src="./dry_contact.jpg" alt="Dry contact control." />
-          <input type="radio" name="protocol" value="drycontact" />
-          Dry Contact control<br/>Requires open &amp; close limit switches
+          <input type="radio" name="protocol" value="dry_contact" />
+          Dry Contact control<br/> (coming soon)
         </label>
       </div>
 
@@ -290,7 +290,10 @@
         var protocol = document.querySelector('input[name="protocol"]:checked').value;
         var hardware = document.querySelector('input[name="hardware"]:checked').value;
         
-        if(protocol === "drycontact"){
+        if(protocol === "dry_contact"){
+          alert("Dry contact support is coming soon.");
+          document.querySelector('input[name="protocol"][value="secplusv2"]').checked = true;
+          return;
           document.querySelector("#wiring_diagram").src = "wiring_diagrams/dry_contact_diagram.png";
         }else{
           document.querySelector("#wiring_diagram").src = "wiring_diagrams/secplus_diagram.png";
diff --git a/static/wiring_diagrams/dry_contact_diagram.png b/static/wiring_diagrams/dry_contact_diagram.png
index 0bf55d4..fef2f5f 100644
Binary files a/static/wiring_diagrams/dry_contact_diagram.png and b/static/wiring_diagrams/dry_contact_diagram.png differ
diff --git a/v25iboard_drycontact.yaml b/v25iboard_drycontact.yaml
deleted file mode 100644
index 59264ae..0000000
--- a/v25iboard_drycontact.yaml
+++ /dev/null
@@ -1,53 +0,0 @@
----
-substitutions:
-  id_prefix: ratgdov25i
-  friendly_name: "ratgdov2.5i"
-  uart_tx_pin: D1
-  uart_rx_pin: D2
-  input_obst_pin: D7
-  dry_contact_open_pin: D5
-  dry_contact_close_pin: D6
-  discrete_open_pin: D0
-  discrete_close_pin: D8
-
-web_server:
-
-esphome:
-  name: ${id_prefix}
-  friendly_name: ${friendly_name}
-  name_add_mac_suffix: true
-  project:
-    name: ratgdo.esphome
-    version: "2.5i"
-
-esp8266:
-  board: d1_mini
-  restore_from_flash: true
-
-dashboard_import:
-  package_import_url: github://ratgdo/esphome-ratgdo/v25iboard_secplusv1.yaml@main
-
-packages:
-  remote_package:
-    url: https://github.com/ratgdo/esphome-ratgdo
-    files: [base_secplusv1.yaml]
-    refresh: 1s
-  # remote_package: !include
-  #   file: base_drycontact.yaml
-# Sync time with Home Assistant.
-time:
-  - platform: homeassistant
-    id: homeassistant_time
-
-api:
-  id: api_server
-
-ota:
-
-improv_serial:
-
-wifi:
-  ap:
-
-logger:
-  level: DEBUG
\ No newline at end of file