4578097306
Merge branch 'main' of https://github.com/ratgdo/esphome-ratgdo
2024-04-17 16:24:10 -04:00
da0776ff12
Adds dry contact opener control ( #258 )
...
* Setting up dry contact protocol
* limit switch implementation
* setup door controls
* Initial commit to make the component aware of the dry_contact sensors… (#249 )
Initial commit to make the component aware of the dry_contact sensors and eliminate the need for lamda calls
Co-authored-by: bradmck <bradmck@gmail.com>
* send both sensor values
* removing irrelevant dry contact config
* Add triple button (discrete) control for commercial openers & gates
* point to git
* Add dry contact to installer
* rm whitespace
* updated wiring diagram
* organize dry contact methods & fix initial limit switch state
---------
Co-authored-by: bradmck <bradmck@gmail.com>
2024-04-17 16:17:29 -04:00
93383489c3
Revert "Dry contact support" ( #257 )
...
Revert "Dry contact support (#255 )"
This reverts commit 7362f46aca
2024-04-17 11:21:20 -04:00
7362f46aca
Dry contact support ( #255 )
...
* Setting up dry contact protocol
* limit switch implementation
* setup door controls
* Initial commit to make the component aware of the dry_contact sensors… (#249 )
Initial commit to make the component aware of the dry_contact sensors and eliminate the need for lamda calls
Co-authored-by: bradmck <bradmck@gmail.com>
* send both sensor values
* removing irrelevant dry contact config
* Add triple button (discrete) control for commercial openers & gates
* point to git
* Add dry contact to installer
* rm whitespace
* updated wiring diagram
---------
Co-authored-by: bradmck <bradmck@gmail.com>
2024-04-17 10:11:55 -04:00
705f381a12
Update ratgdo.cpp
2024-03-21 14:28:51 -04:00
4b57303c1f
Fix bug with opening/closing duration calibration ( #194 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2024-01-23 12:05:04 -10:00
17fad73613
Reduce number of flash writes ( #190 )
2024-01-20 15:15:06 -10:00
f3f8f966dc
feat: Security Plus v1 support ( #171 )
...
Co-authored-by: Marius Muja <mariusmuja@gmail.com>
2024-01-19 13:24:16 -10:00
4c2ed4e7c0
feat: add learn and clear capability ( #149 )
...
Co-authored-by: Marius Muja <mariusmuja@gmail.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
2024-01-18 12:25:08 -10:00
53752d588c
Drop an incomplete packet if the missing bytes are lost ( #144 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-12-16 07:50:51 -10:00
892c4e2872
Detect "not connected to GDO" condition ( #143 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-12-15 20:26:30 -10:00
2ea7ca6e3e
Convert lock remotes switch to a lock component ( #132 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-12-05 14:12:01 -10:00
a1dbdbe751
Add timeout for motion detection ( #104 )
2023-11-08 23:08:58 -06:00
cdc7780c72
Normalize client_id when manually entered ( #97 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-11-07 12:58:16 -06:00
7be33e1c20
Add limits on the range of client_id values ( #95 )
2023-11-05 19:50:59 -06:00
718237ae84
Increase max client id to 0xFFFFFFFF ( #94 )
2023-11-05 18:24:02 -06:00
66ba19e69e
Update potentially wrong client_ids ( #93 )
2023-11-05 18:13:32 -06:00
8317f18b86
Fix issue #89 by imposing some limits on the random client_id ( #92 )
2023-11-05 17:47:11 -06:00
e2f4b6ec5f
Adding cover on_opening and on_closing triggers ( #81 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-11-05 13:49:59 -06:00
c09136da50
Fix door requiring two close commands to close ( #88 )
2023-11-05 09:40:25 -06:00
2091be8312
Use random client_id in lieu of static remote_id ( #76 )
...
Co-authored-by: Paul Wieland <p@ul.sickdimension.com>
2023-10-26 12:04:35 -05:00
7da1282ecb
Automatically tune the optimal baud value for the next packet ( #69 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-10-19 11:56:32 -10:00
f323e02df1
chore: add .pre-commit-config.yaml for end of line fixer ( #66 )
2023-10-18 14:23:30 -10:00
6d8f3e0e86
Door opening/close relliability updates ( #64 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-10-18 14:18:42 -10:00
575471bda1
Rework of door position sync ( #61 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-10-08 12:36:09 -10:00
fe593a9a76
Allow interrupts to be disabled during transmit ( #60 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-10-06 12:54:49 -10:00
d2ae60e6ed
Refactor sync function to be more DRY and easier to extend ( #50 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-09-18 13:18:13 -05:00
fd8e60245e
Make obstruction detection ignore spurrious detections ( #41 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-08-26 16:45:51 -05:00
a1b166e563
feat: add support for disabling the obstruction pin ( #39 )
2023-08-26 08:11:02 -05:00
0c07766cab
Fix obstruction isr for ESP32 ( #38 )
...
Fix obsruction isr for ESP32
In RATGDOComponent::setup() call the ESPHome code to attach_interrupt() before software serial begin(). This allows ESPHome to call IDF gpio_install_isr_service() without error.
2023-08-18 17:37:51 -07:00
03163ea9ae
Don't calibrate open/close durations if they are non-zero ( #34 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-07-20 14:05:37 -05:00
31b96b634b
Fix build on esp32.
2023-07-07 19:19:30 -07:00
38629aac52
Collision detection on transmit ( #31 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-07-07 14:23:26 -10:00
bd36a7e6a3
Make storing persistent state the resposibility of ratgdo_number ( #30 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-07-07 12:56:12 -10:00
3721bb5465
Convert enums to scoped enums ( #28 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-07-03 11:47:00 -05:00
64c409cab9
tidy
2023-07-02 21:45:00 -05:00
877b65be09
Refactorings, changed from camelCase to snake_case for consistency to esphome ( #27 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-07-02 21:44:34 -05:00
49769a6f0a
Downgrade a few more to improve stability
2023-07-01 09:42:10 -05:00
3cfe0e18d6
Downgrade one more
2023-07-01 09:40:34 -05:00
81db7efcf9
Downgrade some loggers to ESP_LOGV to reduce memory churn
2023-07-01 09:36:30 -05:00
7843336b82
Set min and max for opening and closing duration to avoid errors ( #26 )
2023-07-01 09:35:05 -05:00
eee27761b2
Refactor children state update mechanism ( #24 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-07-01 09:13:38 -05:00
056b0ab8ea
Better sync ( #22 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-06-26 14:41:31 -05:00
12f3b8747a
Fix merge
2023-06-25 18:44:54 -05:00
2e7f53835b
Fix
2023-06-25 16:44:24 -07:00
78858628cf
Small cleanup to make setDoorPosition more DRY ( #21 )
...
* Small cleanup to make setDoorPosition more DRY
2023-06-25 16:43:00 -07:00
f1993931a7
Door position control ( #20 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-06-25 18:03:39 -05:00
073b5440cb
Add time to close to commands ( #19 )
2023-06-25 11:28:16 -05:00
eb6f40c060
Use door stop command in place of toggle ( #16 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2023-06-25 10:52:16 -05:00
385a89507b
Fix crash when flash is written too frequently ( #18 )
2023-06-25 10:45:37 -05:00
Paul Wieland
Marius Muja
J. Nick Koston
mulcmu