Update build.yml

* Setting up dry contact protocol

* limit switch implementation

* setup door controls

* Initial commit to make the component aware of the dry_contact sensors… (#249)

Initial commit to make the component aware of the dry_contact sensors  and eliminate the need for lamda calls

Co-authored-by: bradmck <bradmck@gmail.com>

* send both sensor values

* removing irrelevant dry contact config

* Add triple button (discrete) control for commercial openers & gates

* point to git

* Add dry contact to installer

* rm whitespace

* updated wiring diagram

* organize dry contact methods & fix initial limit switch state

* A dirty ifdef

refactor of this needed

---------

Co-authored-by: bradmck <bradmck@gmail.com>

.github/workflows/build.yml

@@ -52,6 +52,9 @@ jobs:
           - file: v25iboard_secplusv1.yaml
             name: V2.5i Board Security+ 1.0
             manifest_filename: v25iboard_secplusv1-manifest.json
+          - file: v25iboard_drycontact.yaml
+            name: V2.5i Board Dry Contact
+            manifest_filename: v25iboard_drycontact-manifest.json
       fail-fast: false
     steps:
       - name: Checkout source code

base.yaml

@@ -73,7 +73,7 @@ switch:
     id: "${id_prefix}_status_door"
     internal: true
     pin:
-      number: ${status_door_pin}  # D0 output door status, HIGH for open, LOW for closed
+      number: ${status_door_pin}  # output door status, HIGH for open, LOW for closed
       mode:
         output: true
     name: "Status door"
@@ -82,7 +82,7 @@ switch:
     id: "${id_prefix}_status_obstruction"
     internal: true
     pin:
-      number: ${status_obstruction_pin}  # D8 output for obstruction status, HIGH for obstructed, LOW for clear
+      number: ${status_obstruction_pin}  # output for obstruction status, HIGH for obstructed, LOW for clear
       mode:
         output: true
     name: "Status obstruction"
@@ -128,7 +128,7 @@ binary_sensor:
   - platform: gpio
     id: "${id_prefix}_dry_contact_open"
     pin:
-      number: ${dry_contact_open_pin}  # D5 dry contact for opening door
+      number: ${dry_contact_open_pin}  # dry contact for opening door
       inverted: true
       mode:
         input: true
@@ -146,7 +146,7 @@ binary_sensor:
   - platform: gpio
     id: "${id_prefix}_dry_contact_close"
     pin:
-      number: ${dry_contact_close_pin}  # D6 dry contact for closing door
+      number: ${dry_contact_close_pin}  # dry contact for closing door
       inverted: true
       mode:
         input: true
@@ -164,7 +164,7 @@ binary_sensor:
   - platform: gpio
     id: "${id_prefix}_dry_contact_light"
     pin:
-      number: ${dry_contact_light_pin}  # D3 dry contact for triggering light (no discrete light commands, so toggle only)
+      number: ${dry_contact_light_pin}  # dry contact for triggering light (no discrete light commands, so toggle only)
       inverted: true
       mode:
         input: true

base_drycontact.yaml

@@ -0,0 +1,95 @@
+---
+
+external_components:
+  - source:
+      # type: local
+      # path: components
+      type: git
+      url: https://github.com/ratgdo/esphome-ratgdo
+    refresh: 1s
+
+preferences:
+  flash_write_interval: 1min
+
+ratgdo:
+  id: ${id_prefix}
+  output_gdo_pin: ${uart_tx_pin}
+  input_obst_pin: ${input_obst_pin}
+  dry_contact_open_sensor: ${id_prefix}_dry_contact_open
+  dry_contact_close_sensor: ${id_prefix}_dry_contact_close
+  discrete_open_pin: ${discrete_open_pin}
+  discrete_close_pin: ${discrete_close_pin}
+  protocol: drycontact
+
+binary_sensor:
+  - platform: ratgdo
+    type: obstruction
+    id: ${id_prefix}_obstruction
+    ratgdo_id: ${id_prefix}
+    name: "Obstruction"
+    device_class: problem
+  - platform: gpio
+    id: "${id_prefix}_dry_contact_open"
+    pin:
+      number: ${dry_contact_open_pin}
+      inverted: true
+      mode:
+        input: true
+        pullup: true
+    name: "Open limit switch"
+    entity_category: diagnostic
+    filters:
+      - delayed_on_off: 500ms
+  - platform: gpio
+    id: "${id_prefix}_dry_contact_close"
+    pin:
+      number: ${dry_contact_close_pin}
+      inverted: true
+      mode:
+        input: true
+        pullup: true
+    name: "Close limit switch"
+    entity_category: diagnostic
+    filters:
+      - delayed_on_off: 500ms
+
+number:
+  - platform: ratgdo
+    id: ${id_prefix}_opening_duration
+    type: opening_duration
+    entity_category: config
+    ratgdo_id: ${id_prefix}
+    name: "Opening duration"
+    unit_of_measurement: "s"
+
+  - platform: ratgdo
+    id: ${id_prefix}_closing_duration
+    type: closing_duration
+    entity_category: config
+    ratgdo_id: ${id_prefix}
+    name: "Closing duration"
+    unit_of_measurement: "s"
+
+cover:
+  - platform: ratgdo
+    id: ${id_prefix}_garage_door
+    device_class: garage
+    name: "Door"
+    ratgdo_id: ${id_prefix}
+
+button:
+  - platform: restart
+    id: ${id_prefix}_restart
+    name: "Restart"
+  - platform: safe_mode
+    id: ${id_prefix}_safe_mode
+    name: "Safe mode boot"
+    entity_category: diagnostic
+
+  - platform: template
+    id: ${id_prefix}_toggle_door
+    name: "Toggle door"
+    on_press:
+      then:
+        lambda: !lambda |-
+          id($id_prefix).door_toggle();

components/ratgdo/__init__.py

@@ -3,6 +3,7 @@ import esphome.config_validation as cv
 import voluptuous as vol
 from esphome import automation, pins
 from esphome.const import CONF_ID, CONF_TRIGGER_ID
+from esphome.components import binary_sensor
 
 DEPENDENCIES = ["preferences"]
 MULTI_CONF = True
@@ -25,6 +26,9 @@ DEFAULT_INPUT_GDO = (
 CONF_INPUT_OBST = "input_obst_pin"
 DEFAULT_INPUT_OBST = "D7"  # D7 black obstruction sensor terminal
 
+CONF_DISCRETE_OPEN_PIN = "discrete_open_pin"
+CONF_DISCRETE_CLOSE_PIN = "discrete_close_pin"
+
 CONF_RATGDO_ID = "ratgdo_id"
 
 CONF_ON_SYNC_FAILED = "on_sync_failed"
@@ -36,7 +40,21 @@ PROTOCOL_SECPLUSV2 = "secplusv2"
 PROTOCOL_DRYCONTACT = "drycontact"
 SUPPORTED_PROTOCOLS = [PROTOCOL_SECPLUSV1, PROTOCOL_SECPLUSV2, PROTOCOL_DRYCONTACT]
 
-CONFIG_SCHEMA = cv.Schema(
+CONF_DRY_CONTACT_OPEN_SENSOR = "dry_contact_open_sensor"
+CONF_DRY_CONTACT_CLOSE_SENSOR = "dry_contact_close_sensor"
+CONF_DRY_CONTACT_SENSOR_GROUP = "dry_contact_sensor_group"
+
+def validate_protocol(config):
+    if config.get(CONF_PROTOCOL, None) == PROTOCOL_DRYCONTACT and (CONF_DRY_CONTACT_CLOSE_SENSOR not in config or CONF_DRY_CONTACT_OPEN_SENSOR not in config):
+        raise cv.Invalid("dry_contact_close_sensor and dry_contact_open_sensor are required when using protocol drycontact")
+    if config.get(CONF_PROTOCOL, None) != PROTOCOL_DRYCONTACT and (CONF_DRY_CONTACT_CLOSE_SENSOR in config or CONF_DRY_CONTACT_OPEN_SENSOR in config):
+        raise cv.Invalid("dry_contact_close_sensor and dry_contact_open_sensor are only valid when using protocol drycontact")
+#    if config.get(CONF_PROTOCOL, None) == PROTOCOL_DRYCONTACT and CONF_DRY_CONTACT_OPEN_SENSOR not in config:
+#        raise cv.Invalid("dry_contact_open_sensor is required when using protocol drycontact")
+    return config    
+
+CONFIG_SCHEMA = cv.All(
+    cv.Schema(
     {
         cv.GenerateID(): cv.declare_id(RATGDO),
         cv.Optional(
@@ -48,16 +66,24 @@ CONFIG_SCHEMA = cv.Schema(
         cv.Optional(CONF_INPUT_OBST, default=DEFAULT_INPUT_OBST): cv.Any(
             cv.none, pins.gpio_input_pin_schema
         ),
+        cv.Optional(CONF_DISCRETE_OPEN_PIN): pins.gpio_output_pin_schema,
+        cv.Optional(CONF_DISCRETE_CLOSE_PIN): pins.gpio_output_pin_schema,
         cv.Optional(CONF_ON_SYNC_FAILED): automation.validate_automation(
             {
                 cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(SyncFailed),
             }
         ),
-        cv.Optional(CONF_PROTOCOL, default=PROTOCOL_SECPLUSV2): vol.In(
+        cv.Optional(CONF_PROTOCOL, default=PROTOCOL_SECPLUSV2): cv.All(vol.In(
             SUPPORTED_PROTOCOLS
-        ),
+        )),
+        # cv.Inclusive(CONF_DRY_CONTACT_OPEN_SENSOR,CONF_DRY_CONTACT_SENSOR_GROUP): cv.use_id(binary_sensor.BinarySensor),
+        # cv.Inclusive(CONF_DRY_CONTACT_CLOSE_SENSOR,CONF_DRY_CONTACT_SENSOR_GROUP): cv.use_id(binary_sensor.BinarySensor),
+        cv.Optional(CONF_DRY_CONTACT_OPEN_SENSOR): cv.use_id(binary_sensor.BinarySensor),
+        cv.Optional(CONF_DRY_CONTACT_CLOSE_SENSOR): cv.use_id(binary_sensor.BinarySensor),
     }
-).extend(cv.COMPONENT_SCHEMA)
+    ).extend(cv.COMPONENT_SCHEMA),
+    validate_protocol,
+)
 
 RATGDO_CLIENT_SCHMEA = cv.Schema(
     {
@@ -82,6 +108,14 @@ async def to_code(config):
         pin = await cg.gpio_pin_expression(config[CONF_INPUT_OBST])
         cg.add(var.set_input_obst_pin(pin))
 
+    if CONF_DRY_CONTACT_OPEN_SENSOR in config and config[CONF_DRY_CONTACT_OPEN_SENSOR]:
+        dry_contact_open_sensor = await cg.get_variable(config[CONF_DRY_CONTACT_OPEN_SENSOR])
+        cg.add(var.set_dry_contact_open_sensor(dry_contact_open_sensor))
+
+    if CONF_DRY_CONTACT_CLOSE_SENSOR in config and config[CONF_DRY_CONTACT_CLOSE_SENSOR]:
+        dry_contact_close_sensor = await cg.get_variable(config[CONF_DRY_CONTACT_CLOSE_SENSOR])
+        cg.add(var.set_dry_contact_close_sensor(dry_contact_close_sensor))
+
     for conf in config.get(CONF_ON_SYNC_FAILED, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
         await automation.build_automation(trigger, [], conf)
@@ -104,3 +138,10 @@ async def to_code(config):
     elif config[CONF_PROTOCOL] == PROTOCOL_DRYCONTACT:
         cg.add_define("PROTOCOL_DRYCONTACT")
     cg.add(var.init_protocol())
+
+    if CONF_DISCRETE_OPEN_PIN in config and config[CONF_DISCRETE_OPEN_PIN]:
+        pin = await cg.gpio_pin_expression(config[CONF_DISCRETE_OPEN_PIN])
+        cg.add(var.set_discrete_open_pin(pin))
+    if CONF_DISCRETE_CLOSE_PIN in config and config[CONF_DISCRETE_CLOSE_PIN]:
+        pin = await cg.gpio_pin_expression(config[CONF_DISCRETE_CLOSE_PIN])
+        cg.add(var.set_discrete_close_pin(pin))

components/ratgdo/dry_contact.cpp

@@ -5,6 +5,7 @@
 #include "esphome/core/gpio.h"
 #include "esphome/core/log.h"
 #include "esphome/core/scheduler.h"
+#include "esphome/components/gpio/binary_sensor/gpio_binary_sensor.h"
 
 namespace esphome {
 namespace ratgdo {
@@ -18,6 +19,12 @@ namespace ratgdo {
             this->scheduler_ = scheduler;
             this->tx_pin_ = tx_pin;
             this->rx_pin_ = rx_pin;
+            
+            this->open_limit_reached_ = 0;
+            this->last_open_limit_ = 0;
+            this->close_limit_reached_ = 0;
+            this->last_close_limit_ = 0;
+            this->door_state_ = DoorState::UNKNOWN;
         }
 
         void DryContact::loop()
@@ -31,6 +38,43 @@ namespace ratgdo {
 
         void DryContact::sync()
         {
+            ESP_LOG1(TAG, "Ignoring sync action");
+        }
+
+        void DryContact::set_open_limit(bool state)
+        {
+            ESP_LOGD(TAG, "Set open_limit_reached to %d", state);
+            this->last_open_limit_ = this->open_limit_reached_;
+            this->last_close_limit_ = false;
+            this->open_limit_reached_ = state;
+            this->send_door_state();
+        }
+
+        void DryContact::set_close_limit(bool state)
+        {
+            ESP_LOGD(TAG, "Set close_limit_reached to %d", state);
+            this->last_close_limit_ = this->close_limit_reached_;
+            this->last_open_limit_ = false;
+            this->close_limit_reached_ = state;
+            this->send_door_state();
+        }
+        
+        void DryContact::send_door_state(){
+            if(this->open_limit_reached_){
+                this->door_state_ = DoorState::OPEN;
+            }else if(this->close_limit_reached_){
+                this->door_state_ = DoorState::CLOSED;
+            }else if(!this->close_limit_reached_ && !this->open_limit_reached_){
+                if(this->last_close_limit_){
+                    this->door_state_ = DoorState::OPENING;
+                }
+
+                if(this->last_open_limit_){
+                    this->door_state_ = DoorState::CLOSING;
+                }
+            }
+
+            this->ratgdo_->received(this->door_state_);
         }
 
         void DryContact::light_action(LightAction action)
@@ -47,14 +91,33 @@ namespace ratgdo {
 
         void DryContact::door_action(DoorAction action)
         {
-            if (action != DoorAction::TOGGLE) {
-                ESP_LOG1(TAG, "Ignoring door action: %s", DoorAction_to_string(action));
+            if (action == DoorAction::OPEN && this->door_state_ != DoorState::CLOSED) {
+                ESP_LOGW(TAG, "The door is not closed. Ignoring door action: %s", DoorAction_to_string(action));
                 return;
             }
+            if (action == DoorAction::CLOSE && this->door_state_ != DoorState::OPEN) {
+                ESP_LOGW(TAG, "The door is not open. Ignoring door action: %s", DoorAction_to_string(action));
+                return;
+            }
+
             ESP_LOG1(TAG, "Door action: %s", DoorAction_to_string(action));
 
-            this->tx_pin_->digital_write(1);
-            this->scheduler_->set_timeout(this->ratgdo_, "", 200, [=] {
+            if (action == DoorAction::OPEN){
+                this->discrete_open_pin_->digital_write(1);
+                this->scheduler_->set_timeout(this->ratgdo_, "", 500, [=] {
+                    this->discrete_open_pin_->digital_write(0);
+                });
+            }
+
+            if (action == DoorAction::CLOSE){
+                this->discrete_close_pin_->digital_write(1);
+                this->scheduler_->set_timeout(this->ratgdo_, "", 500, [=] {
+                    this->discrete_close_pin_->digital_write(0);
+                });
+            }
+
+            this->tx_pin_->digital_write(1); // Single button control
+            this->scheduler_->set_timeout(this->ratgdo_, "", 500, [=] {
                 this->tx_pin_->digital_write(0);
             });
         }

components/ratgdo/dry_contact.h

@@ -2,6 +2,8 @@
 
 #include "SoftwareSerial.h" // Using espsoftwareserial https://github.com/plerup/espsoftwareserial
 #include "esphome/core/optional.h"
+#include "esphome/core/gpio.h"
+#include "esphome/components/gpio/binary_sensor/gpio_binary_sensor.h"
 
 #include "callbacks.h"
 #include "observable.h"
@@ -17,6 +19,7 @@ namespace ratgdo {
     namespace dry_contact {
 
         using namespace esphome::ratgdo::protocol;
+        using namespace esphome::gpio;
 
         class DryContact : public Protocol {
         public:
@@ -29,6 +32,21 @@ namespace ratgdo {
             void light_action(LightAction action);
             void lock_action(LockAction action);
             void door_action(DoorAction action);
+            void set_open_limit(bool state);
+            void set_close_limit(bool state);
+            void send_door_state();
+
+            void set_discrete_open_pin(InternalGPIOPin* pin) { 
+                this->discrete_open_pin_ = pin;
+                this->discrete_open_pin_->setup();
+                this->discrete_open_pin_->pin_mode(gpio::FLAG_OUTPUT);
+            }
+
+            void set_discrete_close_pin(InternalGPIOPin* pin) {
+                this->discrete_close_pin_ = pin;
+                this->discrete_close_pin_->setup();
+                this->discrete_close_pin_->pin_mode(gpio::FLAG_OUTPUT);
+            }
 
             Result call(Args args);
 
@@ -39,9 +57,18 @@ namespace ratgdo {
 
             InternalGPIOPin* tx_pin_;
             InternalGPIOPin* rx_pin_;
+            InternalGPIOPin* discrete_open_pin_;
+            InternalGPIOPin* discrete_close_pin_;
 
             RATGDOComponent* ratgdo_;
             Scheduler* scheduler_;
+
+            DoorState door_state_;
+            bool open_limit_reached_;
+            bool last_open_limit_;
+            bool close_limit_reached_;
+            bool last_close_limit_;
+
         };
 
     } // namespace secplus1

components/ratgdo/protocol.h

@@ -103,6 +103,12 @@ namespace ratgdo {
 
             virtual void sync();
 
+            // dry contact methods
+            virtual void set_open_limit(bool);
+            virtual void set_close_limit(bool);
+            virtual void set_discrete_open_pin(InternalGPIOPin* pin);
+            virtual void set_discrete_close_pin(InternalGPIOPin* pin);
+
             virtual const Traits& traits() const;
 
             virtual void light_action(LightAction action);

components/ratgdo/ratgdo.cpp

@@ -52,6 +52,11 @@ namespace ratgdo {
 
         // many things happening at startup, use some delay for sync
         set_timeout(SYNC_DELAY, [=] { this->sync(); });
+        ESP_LOGD(TAG, " _____ _____ _____ _____ ____  _____ ");
+        ESP_LOGD(TAG, "| __  |  _  |_   _|   __|    \\|     |");
+        ESP_LOGD(TAG, "|    -|     | | | |  |  |  |  |  |  |");
+        ESP_LOGD(TAG, "|__|__|__|__| |_| |_____|____/|_____|");
+        ESP_LOGD(TAG, "https://paulwieland.github.io/ratgdo/");
     }
 
     // initializing protocol, this gets called before setup() because
@@ -418,6 +423,14 @@ namespace ratgdo {
     void RATGDOComponent::sync()
     {
         this->protocol_->sync();
+
+        // dry contact protocol:
+        // needed to trigger the intial state of the limit switch sensors
+        // ideally this would be in drycontact::sync
+#ifdef PROTOCOL_DRYCONTACT
+        this->protocol_->set_open_limit(this->dry_contact_open_sensor_->state);
+        this->protocol_->set_close_limit(this->dry_contact_close_sensor_->state);
+#endif
     }
 
     void RATGDOComponent::door_open()
@@ -673,5 +686,26 @@ namespace ratgdo {
         this->learn_state.subscribe([=](LearnState state) { defer("learn_state", [=] { f(state); }); });
     }
 
+    // dry contact methods
+    void RATGDOComponent::set_dry_contact_open_sensor(esphome::gpio::GPIOBinarySensor* dry_contact_open_sensor)
+    {
+        dry_contact_open_sensor_ = dry_contact_open_sensor;
+        dry_contact_open_sensor_->add_on_state_callback([this](bool sensor_value)
+        {
+            this->protocol_->set_open_limit(sensor_value);
+        }
+        );
+    }
+
+    void RATGDOComponent::set_dry_contact_close_sensor(esphome::gpio::GPIOBinarySensor* dry_contact_close_sensor)
+    {
+        dry_contact_close_sensor_ = dry_contact_close_sensor;
+        dry_contact_close_sensor_->add_on_state_callback([this](bool sensor_value)
+        {
+            this->protocol_->set_close_limit(sensor_value);
+        }
+        );
+    }
+
 } // namespace ratgdo
 } // namespace esphome

components/ratgdo/ratgdo.h

@@ -16,6 +16,7 @@
 #include "esphome/core/component.h"
 #include "esphome/core/hal.h"
 #include "esphome/core/preferences.h"
+#include "esphome/components/gpio/binary_sensor/gpio_binary_sensor.h"
 
 #include "callbacks.h"
 #include "macros.h"
@@ -91,6 +92,12 @@ namespace ratgdo {
         void set_input_gdo_pin(InternalGPIOPin* pin) { this->input_gdo_pin_ = pin; }
         void set_input_obst_pin(InternalGPIOPin* pin) { this->input_obst_pin_ = pin; }
 
+        // dry contact methods
+        void set_dry_contact_open_sensor(esphome::gpio::GPIOBinarySensor* dry_contact_open_sensor_);
+        void set_dry_contact_close_sensor(esphome::gpio::GPIOBinarySensor* dry_contact_close_sensor_);
+        void set_discrete_open_pin(InternalGPIOPin* pin){ this->protocol_->set_discrete_open_pin(pin); }
+        void set_discrete_close_pin(InternalGPIOPin* pin){ this->protocol_->set_discrete_close_pin(pin); }
+
         Result call_protocol(Args args);
 
         void received(const DoorState door_state);
@@ -174,6 +181,8 @@ namespace ratgdo {
         InternalGPIOPin* output_gdo_pin_;
         InternalGPIOPin* input_gdo_pin_;
         InternalGPIOPin* input_obst_pin_;
+        esphome::gpio::GPIOBinarySensor* dry_contact_open_sensor_;
+        esphome::gpio::GPIOBinarySensor* dry_contact_close_sensor_;
     }; // RATGDOComponent
 
 } // namespace ratgdo

components/ratgdo/secplus1.h

@@ -96,6 +96,13 @@ namespace ratgdo {
 
             const Traits& traits() const { return this->traits_; }
 
+            // methods not used by secplus1
+            void set_open_limit(bool state){}
+            void set_close_limit(bool state){}
+            void set_discrete_open_pin(InternalGPIOPin* pin){}
+            void set_discrete_close_pin(InternalGPIOPin* pin){}
+
+
         protected:
             void wall_panel_emulation(size_t index = 0);
 

components/ratgdo/secplus2.h

@@ -101,6 +101,12 @@ namespace ratgdo {
 
             const Traits& traits() const { return this->traits_; }
 
+            // methods not used by secplus2
+            void set_open_limit(bool state){}
+            void set_close_limit(bool state){}
+            void set_discrete_open_pin(InternalGPIOPin* pin){}
+            void set_discrete_close_pin(InternalGPIOPin* pin){}
+
         protected:
             void increment_rolling_code_counter(int delta = 1);
             void set_rolling_code_counter(uint32_t counter);

static/index.html

@@ -202,8 +202,8 @@
 
         <label>
           <img src="./dry_contact.jpg" alt="Dry contact control." />
-          <input type="radio" name="protocol" value="dry_contact" />
-          Dry Contact control<br/> (coming soon)
+          <input type="radio" name="protocol" value="drycontact" />
+          Dry Contact control<br/>Requires open &amp; close limit switches
         </label>
       </div>
 
@@ -290,10 +290,7 @@
         var protocol = document.querySelector('input[name="protocol"]:checked').value;
         var hardware = document.querySelector('input[name="hardware"]:checked').value;
         
-        if(protocol === "dry_contact"){
-          alert("Dry contact support is coming soon.");
-          document.querySelector('input[name="protocol"][value="secplusv2"]').checked = true;
-          return;
+        if(protocol === "drycontact"){
           document.querySelector("#wiring_diagram").src = "wiring_diagrams/dry_contact_diagram.png";
         }else{
           document.querySelector("#wiring_diagram").src = "wiring_diagrams/secplus_diagram.png";

static/v25iboard_drycontact.yaml

@@ -0,0 +1,53 @@
+---
+substitutions:
+  id_prefix: ratgdov25i
+  friendly_name: "ratgdov2.5i"
+  uart_tx_pin: D1
+  uart_rx_pin: D2
+  input_obst_pin: D7
+  dry_contact_open_pin: D5
+  dry_contact_close_pin: D6
+  discrete_open_pin: D0
+  discrete_close_pin: D8
+
+web_server:
+
+esphome:
+  name: ${id_prefix}
+  friendly_name: ${friendly_name}
+  name_add_mac_suffix: true
+  project:
+    name: ratgdo.esphome
+    version: "2.5i"
+
+esp8266:
+  board: d1_mini
+  restore_from_flash: true
+
+dashboard_import:
+  package_import_url: github://ratgdo/esphome-ratgdo/v25iboard_secplusv1.yaml@main
+
+packages:
+  remote_package:
+    url: https://github.com/ratgdo/esphome-ratgdo
+    files: [base_drycontact.yaml]
+    refresh: 1s
+  # remote_package: !include
+  #   file: base_drycontact.yaml
+# Sync time with Home Assistant.
+time:
+  - platform: homeassistant
+    id: homeassistant_time
+
+api:
+  id: api_server
+
+ota:
+
+improv_serial:
+
+wifi:
+  ap:
+
+logger:
+  level: DEBUG

v25iboard_drycontact.yaml

@@ -0,0 +1 @@
+static/v25iboard_drycontact.yaml