esphome:
  name: ${id_prefix}
  friendly_name: ${friendly_name}
  name_add_mac_suffix: true
  project: 
    name: ratgdo.esphome
    version: "1.0"


esp8266:
  board: d1_mini_lite
  restore_from_flash: true

external_components:
  - source:
      type: git
      url: https://github.com/esphome-ratgdo/esphome-ratgdo
      ref: dev
    refresh: 1s

ratgdo:
  id: ${id_prefix}

binary_sensor:
  - platform: ratgdo
    type: motion
    id: ${id_prefix}_motion
    ratgdo_id: ${id_prefix}
    name: "${friendly_name} Motion"
    device_class: motion
  - platform: ratgdo
    type: obstruction
    id: ${id_prefix}_obstruction
    ratgdo_id: ${id_prefix}
    name: "${friendly_name} Obstruction"
    device_class: problem
  - platform: ratgdo
    type: motor
    id: ${id_prefix}_motor
    ratgdo_id: ${id_prefix}
    name: "${friendly_name} Motor"
    device_class: running
    entity_category: diagnostic
  - platform: gpio
    pin: D5 # # D5 dry contact for opening door
    name: "${friendly_name} Dry contact open"
    on_press:
      - cover.open: ${id_prefix}_garage
  - platform: gpio
    pin: D6  # D6 dry contact for closing door
    name: "${friendly_name} Dry contact close"
    on_press:
      - cover.close: ${id_prefix}_garage    
  - platform: gpio
    pin: D3  # D3 dry contact for triggering light (no discrete light commands, so toggle only)
    name: "${friendly_name} Dry contact light"
    on_press:
      - light.toggle: {id_prefix}_light

number:
  - platform: ratgdo
    id: ${id_prefix}_rolling_code_counter
    type: rolling_code_counter
    entity_category: config
    ratgdo_id: ${id_prefix}
    name: "${friendly_name} Rolling Code Counter"
    mode: box
    unit_of_measurement: "codes"

cover:
  - platform: ratgdo
    id: ${id_prefix}_garage
    device_class: garage
    name: ${friendly_name}
    ratgdo_id: ${id_prefix}


light:
  - platform: ratgdo
    id: {id_prefix}_light
    name: "${friendly_name} Light"
    ratgdo_id: ${id_prefix}

uart:
  tx_pin: 
      number: D4 # red control terminal / GarageDoorOpener (UART1 TX) pin is D4 on D1 Mini
      inverted: true
  rx_pin:
      number: D2 # red control terminal / GarageDoorOpener (UART1 RX) pin is D2 on D1 Mini
      inverted: true
  baud_rate: 9600


button:
  - platform: restart
    name: "${friendly_name} Restart"
  - platform: safe_mode
    name: "${friendly_name} Safe Mode Boot"
    entity_category: diagnostic
  - platform: ratgdo
    id: ${id_prefix}_sync
    type: sync
    entity_category: diagnostic
    ratgdo_id: ${id_prefix}
    name: "${friendly_name} Sync"
  - platform: ratgdo
    id: ${id_prefix}_query
    type: query
    entity_category: diagnostic
    ratgdo_id: ${id_prefix}
    name: "${friendly_name} Query"