38 lines
1.4 KiB
Markdown
38 lines
1.4 KiB
Markdown
|
# Falcon F16/F48 V5 Frequently Asked Questions/Issues
|
||
|
|
|
||
|
|
Please see the manual [TO BE PUBLISHED]
|
||
|
|
|
||
|
|
## Ports 17-32 Not Working on a F48
|
||
|
|
|
||
|
|
When the controller is in 32 port mode to get 1024 pixels per output Ports 17-32 are actually Ports 33-48 on the board. This is to allow the user to use the onboard receiver.
|
||
|
|
|
||
|
|
## Playback stops when playing a sequence from the SD Card
|
||
|
|
|
||
|
|
The most common reason we have seen for this is not using a sufficiently high quality SD Card. We recommend 8-32GB SanDisk Class 10 SD Cards. Other cards will likely work but we have seen issues with cheaper no-name cards. When the issue occurs the sequence will just stop playing part way through and may display a timeout if you have logging turned on.
|
||
|
|
|
||
|
|
## Controller Status Page Has Blank Board Type
|
||
|
|
|
||
|
|
The best fix for this is to factory reset the controller by applying power while the select button is held down.
|
||
|
|
|
||
|
|
## Controller OLED does not display anything when power is applied
|
||
|
|
|
||
|
|
The most common reasons for this are:
|
||
|
|
|
||
|
|
- Applying 5V but having the voltage selector set to 12V.
|
||
|
|
- Habing the External power switch set incorrectly.
|
||
|
|
|
||
|
|
## Network Green/Amber Lights dont light when network is connected
|
||
|
|
|
||
|
|
Verify you have plugged the internet into one of the two silver RJ45 connectors with the black insides.
|
||
|
|
|
||
|
|
## LOR/DMX Devices not seeing a signal
|
||
|
|
|
||
|
|
Verify all 3 jumpers next to the DMX RJ45 port are set to the right position.
|
||
|
|
|
||
|
|
## Wifi Web Page Returns 404 Errors
|
||
|
|
|
||
|
|
Install/Reinstall the latest V5 firmware.
|
||
|
|
|
||
|
|
|
||
|
|
|