# ###############################################################################
# #   @author         :   Mahasri Kalavala
# #   @date           :   09/04/2020
# #   @package        :   3D Printer
# #   @description    :   3D Printer Automations
# ###############################################################################
# homeassistant:
#   customize:
#     automation.3d_print:
#       icon: mdi:printer

# input_boolean:
#   twenty_five_percent:
#     name: "25%"
#     icon: mdi:radiobox-blank

#   fifty_percent:
#     name: "50%"
#     icon: mdi:brightness-3

#   seventy_five_percent:
#     name: "75%"
#     icon: mdi:brightness-2

#   hundred_percent:
#     name: "100%"
#     icon: mdi:brightness-1

#   power_off_when_complete:
#     name: Auto Shutoff When Done
#     icon: mdi:toggle-switch-off

#   send_progress_pictures:
#     name: Send Telegram Pictures
#     icon: mdi:toggle-switch-off

# #
# # Octoprint Camera URL in the format
# #    still_image_url: "http://192.xxx.xxx.xxx/webcam/?action=snapshot"
# #    mjpeg_url: "http://192.xxx.xxx.xxx/webcam/?action=stream"
# #
# camera:
#   - platform: mjpeg
#     name: 3D Printer Camera
#     still_image_url: !secret octoprint_cam_snapshot
#     mjpeg_url: !secret octoprint_cam_stream

# #
# # A couple of template sensors to show the elapsed and estimated time in readable format
# # instead of # of seconds (default)
# #
# sensor:
#   # - platform: template
#   #   sensors:
#   #     time_elapsed:
#   #       value_template: >
#   #         {%- macro secondsToReadableString(seconds) %}
#   #         {%- set map = {'week': (seconds / 604800) % 604800,
#   #            'day': (seconds / 86400) % 7, 'hour': (seconds / 3600) % 24,
#   #            'minute': (seconds / 60) % 60} -%}
#   #         {%- for item in map if map[item] | int > 0 -%}
#   #           {%- if loop.first %}{% elif loop.last %}, and {% else %}, {% endif -%}
#   #           {{- map[item]|int }} {{ item -}} {{- 's' if map[item]|int > 1 -}}
#   #         {%- endfor -%}
#   #         {% endmacro %}
#   #         {{ secondsToReadableString(states('sensor.octoprint_time_elapsed') |int) }}

#   # - platform: template
#   #   sensors:
#   #     time_estimated:
#   #       value_template: >
#   #         {%- macro secondsToReadableString(seconds) %}
#   #         {%- set map = {'week': (seconds / 604800) % 604800,
#   #            'day': (seconds / 86400) % 7, 'hour': (seconds / 3600) % 24,
#   #            'minute': (seconds / 60) % 60 } -%}
#   #         {%- for item in map if map[item] | int > 0 -%}
#   #           {%- if loop.first %}{% elif loop.last %}, and {% else %}, {% endif -%}
#   #           {{- map[item]|int }} {{ item -}} {{- 's' if map[item]|int > 1 -}}
#   #         {%- endfor -%}
#   #         {% endmacro %}
#   #         {{ secondsToReadableString(states('sensor.octoprint_time_remaining') |int) }}

#   # - platform: template
#   #   sensors:
#   #     print_completion:
#   #       value_template: >
#   #         {% set seconds = states('sensor.octoprint_time_remaining')|int %}
#   #         {% if utcnow().strftime('%s')|int | timestamp_custom("%A %D") ==  (utcnow().strftime('%s') |int + seconds) | timestamp_custom("%A %D")  %}
#   #           Today at {{ (utcnow().strftime('%s')|int + seconds) | timestamp_custom("%I:%M %p") }}
#   #         {% else %}
#   #           {{ (utcnow().strftime('%s') |int + seconds) | timestamp_custom("%A %D %I:%M %p") }}
#   #         {% endif %}

#   - platform: template
#     sensors:
#       octoprint_actual_bed_temp_c:
#         unit_of_measurement: "C"
#         value_template: >
#           {%- macro F2C(temperature) -%}
#           {% set tmp = (((temperature - 32) *5)/9) %}
#           {{- " %0.2f" % tmp }}
#           {%- endmacro -%}
#           {{ F2C(states('sensor.octoprint_actual_bed_temp') |int ) |int }}

#   - platform: template
#     sensors:
#       octoprint_actual_tool0_temp_c:
#         unit_of_measurement: "C"
#         value_template: >
#           {%- macro F2C(temperature) -%}
#           {% set tmp = (((temperature - 32) *5)/9) %}
#           {{- " %0.2f" % tmp }}
#           {%- endmacro -%}
#           {{ F2C(states('sensor.octoprint_actual_tool0_temp') |int ) |int }}

#   - platform: template
#     sensors:
#       octoprint_target_bed_temp_c:
#         unit_of_measurement: "C"
#         value_template: >
#           {%- macro F2C(temperature) -%}
#           {% set tmp = (((temperature - 32) *5)/9) %}
#           {{- " %0.2f" % tmp }}
#           {%- endmacro -%}
#           {{ F2C(states('sensor.octoprint_target_bed_temp') |int ) |int }}

#   - platform: template
#     sensors:
#       octoprint_target_tool0_temp_c:
#         unit_of_measurement: "C"
#         value_template: >
#           {%- macro F2C(temperature) -%}
#           {% set tmp = (((temperature - 32) *5)/9) %}
#           {{- " %0.2f" % tmp }}
#           {%- endmacro -%}
#           {{ F2C(states('sensor.octoprint_target_tool0_temp') |int ) |int }}

#   - platform: template
#     sensors:
#       octoprint_print_start:
#         value_template: "{{ as_timestamp(states('sensor.octoprint_start_time'))| timestamp_custom('%m/%d/%Y, %H:%M:%S %p') }}"

#   - platform: template
#     sensors:
#       octoprint_print_end_eta:
#         value_template: "{{ as_timestamp(states('sensor.octoprint_estimated_finish_time'))| timestamp_custom('%m/%d/%Y, %H:%M:%S %p') }}"

# automation:
#   #
#   # Notify when the printer status changed from "Prnting" to anything.
#   # Use this later to determine if you want to turn off printer or not
#   #
#   - alias: "3D Print State Changed"
#     trigger:
#       platform: state
#       entity_id: "sensor.octoprint_current_state"
#       from: "Printing"
#     action:
#       - service: script.notify_me
#         data:
#           message: "3D Printer Status Changed from 'Printing' to '{{ trigger.to_state.state }}'."

#   #
#   # Updates on the Printer Status
#   #
#   - alias: "3D Print Notify Printer State"
#     trigger:
#       platform: state
#       entity_id: "binary_sensor.octoprint_printing"
#     action:
#       - service: script.notify_me
#         data:
#           message: "3D Printer Status changed from '{{ trigger.from_state.state }}' to '{{ trigger.to_state.state }}'."

#   #
#   # Notifies when the printer errors out
#   #
#   - alias: "3D Print Notify Printer Error"
#     trigger:
#       platform: state
#       entity_id: binary_sensor.octoprint_printing_error
#       to: "on"
#     action:
#       - service: script.notify_me
#         data:
#           message: "3D Printer Status changed to 'ERROR'. Please check the printer!"

#   #
#   # Updates appropriate input booleans based on percentage complete
#   #
#   - alias: "3D Print Update Percentage Booleans"
#     trigger:
#       platform: state
#       entity_id: sensor.octoprint_job_percentage
#     action:
#       - service_template: "input_boolean.turn_{{- 'on' if states('sensor.octoprint_job_percentage') | int >= 25 else 'off' }}"
#         entity_id: input_boolean.twenty_five_percent
#       - service_template: "input_boolean.turn_{{- 'on' if states('sensor.octoprint_job_percentage') | int >= 50 else 'off' }}"
#         entity_id: input_boolean.fifty_percent
#       - service_template: "input_boolean.turn_{{- 'on' if states('sensor.octoprint_job_percentage') | int >= 75 else 'off' }}"
#         entity_id: input_boolean.seventy_five_percent
#       - service_template: "input_boolean.turn_{{- 'on' if states('sensor.octoprint_job_percentage') | int == 100 else 'off' }}"
#         entity_id: input_boolean.hundred_percent

#   #
#   # Provides update at frequent intervals - 25%, 50%, 75%, and 100%!
#   #
#   - alias: "3D Print Progress Update"
#     trigger:
#       platform: state
#       entity_id: input_boolean.twenty_five_percent, input_boolean.fifty_percent, input_boolean.seventy_five_percent, input_boolean.hundred_percent
#       to: "on"
#       from: "off"
#     action:
#       - service: script.notify_me
#         data:
#           message: >-
#             3D Printer job is now {{ trigger.to_state.attributes.friendly_name }} complete.

#   #
#   # When the printing is complete (100%), it waits for 2 minutes and turns off the printer.
#   # It also resets all the input booleans, so that it starts fresh next time.
#   # Resetting input boleans is not necessary as they get updated automatically when
#   # octoprint job percentage value chaanges... but why not?
#   #
#   - alias: "3d Print Job Finished"
#     trigger:
#       platform: state
#       entity_id: input_boolean.hundred_percent
#       to: "on"
#     action:
#       - condition: template
#         value_template: "{{ states('input_boolean.power_off_when_complete') == 'on' }}"
#       - delay: "00:02:00"
#       - service: switch.turn_off
#         entity_id: switch.3d_printer
#       - service: script.notify_me
#         data:
#           message: "3D Printer is now switched off!"
#       - service_template: input_boolean.turn_off
#         entity_id: input_boolean.twenty_five_percent
#       - service_template: input_boolean.turn_off
#         entity_id: input_boolean.fifty_percent
#       - service_template: input_boolean.turn_off
#         entity_id: input_boolean.seventy_five_percent
#       - service_template: input_boolean.turn_off
#         entity_id: input_boolean.hundred_percent

#   #
#   # If the printer is ON and is "Printing", it will send a snapshot/picture every 30 minutes
#   #
#   - alias: "3D Print Send Telegram Pictures"
#     trigger:
#       platform: time_pattern
#       minutes: "/30"
#       seconds: 00
#     condition:
#       - condition: template
#         value_template: "{{ states('input_boolean.send_progress_pictures') == 'on' }}"
#       - condition: template
#         value_template: "{{ states('sensor.octoprint_current_state') | lower == 'printing' }}"
#     action:
#       - service: camera.snapshot
#         data:
#           entity_id: camera.3d_printer_camera
#           filename: "/config/www/downloads/camera/3dprinter/print_latest.jpg"
#       - service: notify.telegram
#         data:
#           title: "3D Printer"
#           message: "Print Progress"
#           data:
#             photo:
#               - file: "/config/www/downloads/camera/3dprinter/print_latest.jpg"
#                 caption: "3D Print Progress at {{ states('sensor.octoprint_job_percentage') }}%"