mirror of
https://github.com/asterisk/asterisk.git
synced 2025-09-06 12:36:58 +00:00
Made changes to app_rpt.c and rpt.conf, including fully user-definable DTMF
command definitions, and an improved ID methodology. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@3426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is contained in:
Jim Dixon
2020
apps/app_rpt.c
2020
apps/app_rpt.c
File diff suppressed because it is too large
Load Diff
@@ -7,18 +7,24 @@
|
||||
; Note: if you use a unified interface (tx/rx on one channel), only
|
||||
; specify the rxchannel and the txchannel will be assumed from the rxchannel
|
||||
;txchannel = Zap/2 ; Tx audio/signalling channel
|
||||
;functions = functions-repeater ; DTMF function list
|
||||
;; specify this for a different function list then local when on link
|
||||
;;link_functions = functions-different ; DTMF function list for link
|
||||
;tonezone = us ; use US tones (default)
|
||||
;simple = no ; Not in "simple" mode
|
||||
;context = default ; dialing context for phone
|
||||
;callerid = "WB6NIL Repeater" <(559) 692-1234> ; Callerid for phone calls
|
||||
;idrecording = wb6nil ; id recording
|
||||
;accountcode=RADIO ; account code (optional)
|
||||
;funcchar = * ; function lead-in character (defaults to '*')
|
||||
;endchar = # ; command mode end character (defaults to '#')
|
||||
;hangtime=1000 ; squelch tail hang time (in ms) (optional)
|
||||
;totime=100000 ; transmit time-out time (in ms) (optional)
|
||||
;idtime=30000 ; id interval time (in ms) (optional)
|
||||
politeid=30000 ; time in milliseconds before ID timer
|
||||
;politeid=30000 ; time in milliseconds before ID timer
|
||||
; expires to try and ID in the tail.
|
||||
; (optional, default is 30000).
|
||||
;idtalkover=|iwb6nil/rpt ; Talkover ID (optional) default is none
|
||||
;unlinkedct=ct2 ; unlinked courtesy tone (optional) default is none
|
||||
|
||||
; The default values for hangtime, time-out time, and id interval time are
|
||||
; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms)
|
||||
@@ -31,14 +37,20 @@ politeid=30000 ; time in milliseconds before ID timer
|
||||
; specify the rxchannel and the txchannel will be assumed from the rxchannel
|
||||
;txchannel = Zap/4 ; Tx audio/signalling channel
|
||||
;tonezone = us ; use US tones (default)
|
||||
;simple = no ; Not in "simple" mode
|
||||
;context = default ; dialing context for phone
|
||||
;callerid = "WB6NIL Repeater" <(559) 692-1234> ; Callerid for phone calls
|
||||
;idrecording = wb6nil ; id recording
|
||||
;accountcode=RADIO ; account code (optional)
|
||||
;funcchar = * ; function lead-in character (defaults to '*')
|
||||
;endchar = # ; command mode end character (defaults to '#')
|
||||
;hangtime=1000 ; squelch tail hang time (in ms) (optional)
|
||||
;totime=100000 ; transmit time-out time (in ms) (optional)
|
||||
;idtime=30000 ; id interval time (in ms) (optional)
|
||||
;politeid=30000 ; time in milliseconds before ID timer
|
||||
; expires to try and ID in the tail.
|
||||
; (optional, default is 30000).
|
||||
;idtalkover=|iwb6nil/rpt ; Talkover ID (optional) default is none
|
||||
;unlinkedct=ct2 ; unlinked courtesy tone (optional) default is none
|
||||
|
||||
;[002] ; Node ID of remote base
|
||||
|
||||
@@ -46,26 +58,106 @@ politeid=30000 ; time in milliseconds before ID timer
|
||||
; Note: if you use a unified interface (tx/rx on one channel), only
|
||||
; specify the rxchannel and the txchannel will be assumed from the rxchannel
|
||||
;txchannel = Zap/6 ; Tx audio/signalling channel
|
||||
;functions = functions-remote
|
||||
;remote = yes
|
||||
;iobase = 0x378 ; Specify IO port for parallel port (optional)
|
||||
|
||||
[nodes]
|
||||
;[functions-repeater]
|
||||
;1=ilink,1 ; Specific link disconnect
|
||||
;2=ilink,2 ; Specific Link connect - monitor only
|
||||
;3=ilink,3 ; Specific Link connect - transceive
|
||||
;4=ilink,4 ; Enter command mode on a specific link
|
||||
;7=ilink,5 ; Link status
|
||||
;;XX=ilink,6 ; Disconnect all links (not used here)
|
||||
|
||||
000 = context_A@1.2.3.4/1234
|
||||
001 = context_B@5.6.7.8/4321
|
||||
;80=status,1 ; System info
|
||||
;81=status,2 ; Time
|
||||
;82=status,3 ; app_rpt.c Version
|
||||
|
||||
;6=autopatchup ; Autopatch up
|
||||
;0=autopatchdn ; Autopatch down
|
||||
|
||||
;90=cop,1 ; System warm boot
|
||||
;91=cop,2 ; System enable
|
||||
;92=cop,3 ; System disable
|
||||
|
||||
;[functions-remote]
|
||||
|
||||
;0=remote,1 ; Retrieve Memory
|
||||
;1=remote,2 ; Set freq.
|
||||
;2=remote,3 ; Set Rx PL tone.
|
||||
;40=remote,100 ; Rx PL off
|
||||
;41=remote,101 ; Rx PL on
|
||||
;42=remote,102 ; Tx PL off
|
||||
;43=remote,103 ; Tx PL on
|
||||
;44=remote,104 ; Low Pwr
|
||||
;45=remote,105 ; Med Pwr
|
||||
;46=remote,106 ; Hi Pwr
|
||||
;5=remote,5 ; Status
|
||||
|
||||
;[telemetry]
|
||||
|
||||
; Telemetry entries are shared across all repeaters
|
||||
; Can be a tone sequence, morse string, or a file
|
||||
;
|
||||
; |t - Tone escape sequence
|
||||
;
|
||||
; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, duration, amplitude)
|
||||
; Single frequencies are created by setting freq1 or freq2 to zero.
|
||||
;
|
||||
; |m - Morse escape sequence
|
||||
;
|
||||
; Sends Morse code at the telemetry amplitude and telemetry frequency as defined in the
|
||||
; [morse] section.
|
||||
;
|
||||
; Follow with an alphanumeric string
|
||||
;
|
||||
; |i - Morse ID escape sequence
|
||||
;
|
||||
; Sends Morse code at the ID amplitude and ID frequency as defined in the
|
||||
; [morse] section.
|
||||
;
|
||||
; Follow with an alphanumeric string
|
||||
|
||||
|
||||
;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
|
||||
;ct2=|t(660,880,150,2048)
|
||||
;ct3=|t(440,0,150,2048)
|
||||
;ct4=|t(550,0,150,2048)
|
||||
;ct5=|t(660,0,150,2048)
|
||||
;ct6=|t(880,0,150,2048)
|
||||
;ct7=|t(660,440,150,2048)
|
||||
;ct8=|t(700,1100,150,2048)
|
||||
;remotetx=|t(2000,0,75,2048)(0,0,75,0)(1600,0,75,2048);
|
||||
;remotemon=|t(1600,0,75,2048)
|
||||
;cmdmode=|t(900,903,200,2048)
|
||||
;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
|
||||
|
||||
|
||||
;[morse]
|
||||
|
||||
;speed=20 ; Approximate speed in WPM
|
||||
;frequency=800 ; Morse Telemetry Frequency
|
||||
;amplitude=4096 ; Morse Telemetry Amplitude
|
||||
;idfrequency=330 ; Morse ID Frequency
|
||||
;idamplitude=2048 ; Morse ID Amplitude
|
||||
|
||||
;[nodes]
|
||||
|
||||
;000 = context_A@1.2.3.4/1234
|
||||
;001 = context_B@5.6.7.8/4321
|
||||
|
||||
;of course, you can also specify these with domain names, but why rely
|
||||
;on DNS working unnecessarily?
|
||||
|
||||
[memory]
|
||||
;[memory]
|
||||
|
||||
; this example gives you 146.460, simplex, 100.0 HZ PL, hi-power, transmit PL
|
||||
00 = 146.460,100.0,sht
|
||||
; this example gives you 146.940, minus offset, 100.0 HZ PL, low-power, no PL
|
||||
01 = 146.940,100.0,-l
|
||||
;; this example gives you 146.460, simplex, 100.0 HZ PL, hi-power, transmit PL
|
||||
;00 = 146.460,100.0,sht
|
||||
;; this example gives you 146.940, minus offset, 100.0 HZ PL, low-power, no PL
|
||||
;01 = 146.940,100.0,-l
|
||||
|
||||
; The format for these entries is: Receive-Freq,Receive-PL,Attrbutes
|
||||
; Attributes: l=low power, m=medium power, h=high power, -=minus offset,
|
||||
; s=simplex, +=plus offset, t=tx PL enable, r=rx PL enable
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user