As soon as SIP call may end with several Reason headers, we
want to make all of them available through the HAGUPCAUSE() function.
This implementation uses the same ao2 hash for cause codes storage
and adds a flag to make difference between last processed sip
message and content of reason headers.
UserNote: Added a new option to HANGUPCAUSE to access additional
information about hangup reason. Reason headers from pjsip
could be read using 'tech_extended' cause type.
The bridge play and record APIs were forcing the Announcer/Recorder channel
to slin8 which meant that if you played or recorded audio with a sample
rate > 8K, it was downsampled to 8K limiting the bandwidth.
* The /bridges/play REST APIs have a new "announcer_format" parameter that
allows the caller to explicitly set the format on the "Announcer" channel
through which the audio is played into the bridge. If not specified, the
default depends on how many channels are currently in the bridge. If
a single channel is in the bridge, then the Announcer channel's format
will be set to the same as that channel's. If multiple channels are in the
bridge, the channels will be scanned to find the one with the highest
sample rate and the Announcer channel's format will be set to the slin
format that has an equal to or greater than sample rate.
* The /bridges/record REST API has a new "recorder_format" parameter that
allows the caller to explicitly set the format on the "Recorder" channel
from which audio is retrieved to write to the file. If not specified,
the Recorder channel's format will be set to the format that was requested
to save the audio in.
Resolves: #1479
DeveloperNote: The ARI /bridges/play and /bridges/record REST APIs have new
parameters that allow the caller to specify the format to be used on the
"Announcer" and "Recorder" channels respecitvely.
This adds support for the Geolocation 'loc-src' parameter to res_pjsip_geolocation.
The already existing config option 'location_source` in res_geolocation is documented to add a 'loc-src' parameter containing a user-defined FQDN to the 'Geolocation:' header,
but that option had no effect as it was not implemented by res_pjsip_geolocation.
If the `location_source` configuration option is not set or invalid, that parameter will not be added (this is already checked by res_geolocation).
This commits adds already documented functionality.
In __rtp_sendto(), the check for DTLS negotiation completion for rtcp packets
needs to use the rtp->dtls structure instead of rtp->rtcp->dtls when
AST_RTP_INSTANCE_RTCP_MUX is set.
Resolves: #1474
Added a check to outbound_websocket_apply() that makes sure an outbound
websocket config object in ari.conf has a websocket_client_id parameter.
Resolves: #1457
One of the problems with TONE_DETECT as it was originally written
is that if a tone is detected multiple times, it can trigger
the redirect logic multiple times as well. For example, if we
do an async goto in the dialplan after detecting a tone, because
the detector is still active until explicitly disabled, if we
detect the tone again, we will branch again and start executing
that dialplan a second time. This is rarely ever desired behavior,
and can happen if the detector is not removed quickly enough.
Add a new option, 'e', which automatically disables the detector
once the desired number of matches have been heard. This eliminates
the potential race condition where previously the detector would
need to be disabled immediately, but doing so quickly enough
was not guaranteed. This also allows match criteria to be retained
longer if needed, so the detector does not need to be destroyed
prematurely.
Resolves: #1390
UserNote: The 'e' option for TONE_DETECT now allows detection to
be disabled automatically once the desired number of matches have
been fulfilled, which can help prevent race conditions in the
dialplan, since TONE_DETECT does not need to be disabled after
a hit.
In the highly-unlikely event that get_authorization_hdr() couldn't find an
Authorization header in a request, trying to get the digest algorithm
would cauase a SEGV. We now check that we have an auth header that matches
the realm before trying to get the algorithm from it.
Resolves: #GHSA-64qc-9x89-rx5j
This patch resolves two issues in Sorcery objectset handling with multiple
backends:
1. Prevent duplicate objects:
When an object exists in more than one backend (e.g., a contact in both
'astdb' and 'realtime'), the objectset previously returned multiple instances
of the same logical object. This caused logic failures in components like the
PJSIP registrar, where duplicate contact entries led to overcounting and
incorrect deletions, when max_contacts=1 and remove_existing=yes.
This patch ensures only one instance of an object with a given key is added
to the objectset, avoiding these duplicate-related side effects.
2. Ensure missing objects are created:
When using multiple writable backends, a temporary backend failure can lead
to objects missing permanently from that backend.
Currently, .update() silently fails if the object is not present,
and no .create() is attempted.
This results in inconsistent state across backends (e.g. astdb vs. realtime).
This patch introduces a new global option in sorcery.conf:
[general]
update_or_create_on_update_miss = yes|no
Default: no (preserves existing behavior).
When enabled: if .update() fails with no data found, .create() is attempted
in that backend. This ensures that objects missing due to temporary backend
outages are re-synchronized once the backend is available again.
Added a new CLI command:
sorcery show settings
Displays global Sorcery settings, including the current value of
update_or_create_on_update_miss.
Updated tests to validate both flag enabled/disabled behavior.
Fixes: #1289
UserNote: Users relying on Sorcery multiple writable backends configurations
(e.g., astdb + realtime) may now enable update_or_create_on_update_miss = yes
in sorcery.conf to ensure missing objects are recreated after temporary backend
failures. Default behavior remains unchanged unless explicitly enabled.
* Added a new option to the WebSocket dial string to capture the additional
URI parameters.
* Added a new API ast_uri_verify_encoded() that verifies that a string
either doesn't need URI encoding or that it has already been encoded.
* Added a new API ast_websocket_client_add_uri_params() to add the params
to the client websocket session.
* Added XML documentation that will show up with `core show application Dial`
that shows how to use it.
Resolves: #1352
UserNote: A new WebSocket channel driver option `v` has been added to the
Dial application that allows you to specify additional URI parameters on
outgoing connections. Run `core show application Dial` from the Asterisk CLI
to see how to use it.
Adds an ARI command to send a progress indication to a channel.
DeveloperNote: A new ARI endpoint is available at `/channels/{channelId}/progress` to indicate progress to a channel.
After an asterisk restart, the deletion of ARI Devicestates didn't
return error, but the devicestate was not deleted.
Found a typo on populate_cache function that created wrong cache for
device states.
This bug caused wrong assumption that devicestate didn't exist,
since it was not in cache, so deletion didn't returned error.
Fixes: #1327
There was no check in __rtp_sendto that prevented Asterisk from sending
RTP before DTLS had finished negotiating. This patch adds logic to do
so.
Fixes: #1260
Based on the firing order of the PJSIP call-backs on a redirect, it was possible for
the Diversion header to not be included in the outgoing 181 response to the UAC and
the INVITE to the UAS.
This change moves the Diversion header processing to an earlier PJSIP callback while also
preventing the corresponding update that can cause a duplicate 181 response when processing
the header at that time.
Resolves: #1349
Fixes: #1280
UserNote: Enabling the tracking of the
STREAM_BEGIN and the STREAM_END event
types in cel.conf will log media files and
music on hold played to each channel.
The STREAM_BEGIN event's extra field will
contain a JSON with the file details (path,
format and language), or the class name, in
case of music on hold is played. The DTMF
event's extra field will contain a JSON with
the digit and the duration in milliseconds.
UserNote: Options are now available in the menuselect "Resource Modules"
category that allow you to enable the AES_192, AES_256 and AES_GCM
cipher suites in res_srtp. Of course, libsrtp and OpenSSL must support
them but modern versions do. Previously, the only way to enable them was
to set the CFLAGS environment variable when running ./configure.
The default setting is to disable them preserving existing behavior.
DeveloperNote: The 32-bit ast_options has no room left to accomodate new
options and so has been converted to an ast_flags64 structure. All internal
references to ast_options have been updated to use the 64-bit flag
manipulation macros. External module references to the 32-bit ast_options
should continue to work on little-endian systems because the
least-significant bytes of a 64 bit integer will be in the same location as a
32-bit integer. Because that's not the case on big-endian systems, we've
swapped the bytes in the flags manupulation macros on big-endian systems
so external modules should still work however you are encouraged to test.
This patch fixes an issue in the ODBC Realtime engine where Asterisk incorrectly
falls back to the next configured backend when the current one returns
SQL_NO_DATA (i.e., no record found).
This is a logical error and performance risk in multi-backend configurations.
Solution:
Introduced CONFIG_RT_NOT_FOUND ((void *)-1) as a special return marker.
ODBC Realtime backend now return CONFIG_RT_NOT_FOUND when no data is found.
Core engine stops iterating on this marker, avoiding unnecessary fallback.
Notes:
Other Realtime backends (PostgreSQL, LDAP, etc.) can be updated similarly.
This patch only covers ODBC.
Fixes: #1305
`ast_ari_channels_create` and `ast_ari_channels_dial` called the
`ast_channel_get_by_name` function with optional arguments. Since
8f1982c4d6, this function logs an error for empty channel names.
This commit adds checks for empty optional arguments that are used
to call `ast_channel_get_by_name` to prevent these error logs.
Commit 9c1f34c7e9 added dedicated options
for random sorting functionality and deprecated older options that
now duplicated these capabilities. Remove these deprecated options.
Resolves: #1296
UpgradeNote: The deprecated random and application=r options have
been removed; use sort=random instead.
DeadAGI was deprecated 7 years ago, in Asterisk 15,
as it duplicates functionality in the AGI app.
This removes the application.
Resolves: #258
UpgradeNote: The DeadAGI application, which was
deprecated in Asterisk 15, has now been removed.
The same functionality is available in the AGI app.
users.conf was deprecated in Asterisk 21 and is now being removed
for Asterisk 23, in accordance with the Asterisk deprecation policy.
This consists of:
* Removing integration with app_directory, app_voicemail, chan_dahdi,
chan_iax2, and AMI.
* users.conf was also partially used for res_phoneprov, and this remaining
functionality is consolidated to a separate phoneprov_users.conf,
used only by res_phoneprov.
Resolves: #1292
UpgradeNote: users.conf has been removed and all channel drivers must
be configured using their specific configuration files. The functionality
previously in users.conf for res_phoneprov is now in phoneprov_users.conf.
* Created chan_websocket which can exchange media over both inbound and
outbound websockets which the driver will frame and time.
See http://s.asterisk.net/mow for more information.
* res_http_websocket: Made defines for max message size public and converted
a few nuisance verbose messages to debugs.
* main/channel.c: Changed an obsolete nuisance error to a debug.
* ARI channels: Updated externalMedia to include chan_websocket as a supported
transport.
UserNote: A new channel driver "chan_websocket" is now available. It can
exchange media over both inbound and outbound websockets and will both frame
and re-time the media it receives.
See http://s.asterisk.net/mow for more information.
UserNote: The ARI channels/externalMedia API now includes support for the
WebSocket transport provided by chan_websocket.
This relates to #829
This doesn't sully solve the Ops issue, but it solves the specific crash
there. Further PRs to follow.
In the specific crash the generator was still under construction when
moh was being stopped, which then proceeded to close the stream whilst
it was still in use.
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
The verification process will now load a full certificate chain retrieved
via the X5U URL instead of loading only the end user cert.
* Renamed crypto_load_cert_from_file() and crypto_load_cert_from_memory()
to crypto_load_cert_chain_from_file() and crypto_load_cert_chain_from_memory()
respectively.
* The two load functions now continue to load certs from the file or memory
PEMs and store them in a separate stack of untrusted certs specific to the
current verification context.
* crypto_is_cert_trusted() now uses the stack of untrusted certs that were
extracted from the PEM in addition to any untrusted certs that were passed
in from the configuration (and any CA certs passed in from the config of
course).
Resolves: #1272
UserNote: The STIR/SHAKEN verification process will now load a full
certificate chain retrieved via the X5U URL instead of loading only
the end user cert.
UserNote: A new STIR/SHAKEN verification option "ignore_sip_date_header" has
been added that when set to true, will cause the verification process to
not consider a missing or invalid SIP "Date" header to be a failure. This
will make the IAT the sole "truth" for Date in the verification process.
The option can be set in the "verification" and "profile" sections of
stir_shaken.conf.
Also fixed a bug in the port match logic.
Resolves: #1251Resolves: #1271
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
UserNote: New cache_size option for res_odbc to on a per class basis limit the
number of cached connections. Please reference the sample configuration
for details.
This enables setting cache_type classes to a round-robin queueing system
rather than the historic stack mechanism.
This should result in lower risk of connection drops due to shorter idle
times (the first connection to go onto the stack could in theory never
be used again, ever, but sit there consuming resources, there could be
multiple of these).
And with a queue rather than a stack, dead connections are guaranteed to
be detected and purged eventually.
This should end up better balancing connection_cnt with actual load
over time, assuming the database doesn't keep connections open
excessively long from it's side.
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
UserNote: When using res_odbc it should be noted that back-end
connections to the underlying database can now be configured to re-use
the cached connections in a round-robin manner rather than repeatedly
re-using the same connection. This helps to keep connections alive, and
to purge dead connections from the system, thus more dynamically
adjusting to actual load. The downside is that one could keep too many
connections active for a longer time resulting in resource also begin
consumed on the database side.
Asterisk can now establish websocket sessions _to_ your ARI applications
as well as accepting websocket sessions _from_ them.
Full details: http://s.asterisk.net/ari-outbound-ws
Code change summary:
* Added an ast_vector_string_join() function,
* Added ApplicationRegistered and ApplicationUnregistered ARI events.
* Converted res/ari/config.c to use sorcery to process ari.conf.
* Added the "outbound-websocket" ARI config object.
* Refactored res/ari/ari_websockets.c to handle outbound websockets.
* Refactored res/ari/cli.c for the sorcery changeover.
* Updated res/res_stasis.c for the sorcery changeover.
* Updated apps/app_stasis.c to allow initiating per-call outbound websockets.
* Added CLI commands to manage ARI websockets.
* Added the new "outbound-websocket" object to ari.conf.sample.
* Moved the ARI XML documentation out of res_ari.c into res/ari/ari_doc.xml
UserNote: Asterisk can now establish websocket sessions _to_ your ARI applications
as well as accepting websocket sessions _from_ them.
Full details: http://s.asterisk.net/ari-outbound-ws
Since multiple Asterisk capabilities now need to create websocket clients
it makes sense to create a common set of utilities rather than making
each of those capabilities implement their own.
* A new configuration file "websocket_client.conf" is used to store common
client parameters in named configuration sections.
* APIs are provided to list and retrieve ast_websocket_client objects created
from the named configurations.
* An API is provided that accepts an ast_websocket_client object, connects
to the remote server with retries and returns an ast_websocket object. TLS is
supported as is basic authentication.
* An observer can be registered to receive notification of loaded or reloaded
client objects.
* An API is provided to compare an existing client object to one just
reloaded and return the fields that were changed. The caller can then decide
what action to take based on which fields changed.
Also as part of thie commit, several sorcery convenience macros were created
to make registering common object fields easier.
UserNote: A new module "res_websocket_client" and config file
"websocket_client.conf" have been added to support several upcoming new
capabilities that need common websocket client configuration.
Incoming SIP MESSAGEs will now have their From header's display name
sanitized by replacing any characters < 32 (space) with a space.
Resolves: #GHSA-2grh-7mhv-fcfw
The added retry mechanism addresses an issue that arises when fragmented TCP
packets are received, each containing only a portion of an AudioSocket packet.
This situation can occur if the external service sending the AudioSocket data
has Nagle's algorithm enabled.
When a call is transfered via dialplan behind a NAT, the
host portion of the Contact header in the 302 will no longer
be over-written with the external NAT IP and will retain the
hostname.
Fixes: #1141
If the isup-oli was sent as a URI parameter, rather than a header
parameter, it was not being parsed. Make sure we parse both if
needed so the ANI2 is set regardless of which type of parameter
the isup-oli is sent as.
Resolves: #1220
Other Dial operations (dial, app_dial) use Q.850 cause 19 when a dial timeout occurs,
but the Dial command via ARI did not set an explicit reason. This resulted in a
CANCEL with Normal Call Clearing and corresponding ChannelDestroyed.
This change sets the hangup cause to AST_CAUSE_NO_ANSWER to be consistent with the
other operations.
Fixes: #963
UserNote: A Dial timeout on POST /channels/{channelId}/dial will now result in a
CANCEL and ChannelDestroyed with cause 19 / User alerting, no answer. Previously
no explicit cause was set, resulting in a cause of 16 / Normal Call Clearing.
Certain platforms (mainly BSD derivatives) have an additional length
field in `sockaddr_in6` and `sockaddr_in`.
`ast_sockaddr_from_pj_sockaddr()` does not take this field into account
when copying over values from the `pj_sockaddr` into the `ast_sockaddr`.
The resulting `ast_sockaddr` will have an uninitialized value for
`sin6_len`/`sin_len` while the other `ast_sockaddr` (not converted from
a `pj_sockaddr`) to check against in `ast_sockaddr_pj_sockaddr_cmp()`
has the correct length value set.
This has the effect that `ast_sockaddr_cmp()` will always indicate
an address mismatch, because it does a bitwise comparison, and all DTLS
packets are dropped even if addresses and ports match.
`ast_sockaddr_from_pj_sockaddr()` now checks whether the length fields
are available on the current platform and sets the values accordingly.
Resolves: #505
stasis:
* Added stasis_app_is_registered().
* Added stasis_app_control_mark_failed().
* Added stasis_app_control_is_failed().
* Fixed res_stasis_device_state so unsubscribe all works properly.
* Modified stasis_app_unregister() to unsubscribe from all event sources.
* Modified stasis_app_exec to return -1 if stasis_app_control_is_failed()
returns true.
http:
* Added ast_http_create_basic_auth_header().
md5:
* Added define for MD5_DIGEST_LENGTH.
tcptls:
* Added flag to ast_tcptls_session_args to suppress connection log messages
to give callers more control over logging.
http_websocket:
* Add flag to ast_websocket_client_options to suppress connection log messages
to give callers more control over logging.
* Added username and password to ast_websocket_client_options to support
outbound basic authentication.
* Added ast_websocket_result_to_str().
This commit adds the ability to make ARI REST requests over the same
websocket used to receive events.
For full details on how to use the new capability, visit...
https://docs.asterisk.org/Configuration/Interfaces/Asterisk-REST-Interface-ARI/ARI-REST-over-WebSocket/
Changes:
* Added utilities to http.c:
* ast_get_http_method_from_string().
* ast_http_parse_post_form().
* Added utilities to json.c:
* ast_json_nvp_array_to_ast_variables().
* ast_variables_to_json_nvp_array().
* Added definitions for new events to carry REST responses.
* Created res/ari/ari_websocket_requests.c to house the new request handlers.
* Moved non-event specific code out of res/ari/resource_events.c into
res/ari/ari_websockets.c
* Refactored res/res_ari.c to move non-http code out of ast_ari_callback()
(which is http specific) and into ast_ari_invoke() so it can be shared
between both the http and websocket transports.
UpgradeNote: This commit adds the ability to make ARI REST requests over the same
websocket used to receive events.
See https://docs.asterisk.org/Configuration/Interfaces/Asterisk-REST-Interface-ARI/ARI-REST-over-WebSocket/
Updated the AudioSocket protocol to allow sending DTMF frames.
AST_FRAME_DTMF frames are now forwarded to the server, in addition to
AST_FRAME_AUDIO frames. A new payload type AST_AUDIOSOCKET_KIND_DTMF
with value 0x03 was added to the protocol. The payload is a 1-byte
ascii representing the DTMF digit (0-9,*,#...).
UserNote: The AudioSocket protocol now forwards DTMF frames with
payload type 0x03. The payload is a 1-byte ascii representing the DTMF
digit (0-9,*,#...).
