(closes issue #16102)
Reported by: Delvar
Patches:
say.conf.fix.patch uploaded by Delvar (license 908)
(plus a few additional fixes and simplifications by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@274417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk has always set up a forwarded call when receiving a 482 Loop Detected.
This prevents handling the call failure by just continuing on in the dialplan.
Since this would be a change in behavior, the new option to disable this
behavior is forwardloopdetected which defaults to 'yes'.
Review: https://reviewboard.asterisk.org/r/764/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@274280 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Issue #7321 implements a new chan_dahdi configuration option. However, a
change mentioned in the issue was never implemented. This is the change
that will allow the feature to work.
I added a note to chan_dahdi.conf.sample about the feature.
(closes issue #17143)
Reported by: djensen99
Patches:
diff.txt uploaded by djensen99 (license NA) (One line change)
Tested by: djensen99
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@259270 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Before r238915, certain values for the EventMask parameter of the Events action would result in no response being returned. This patch adds an option to restore that broken behavior. Also while fixing this bug I discovered that passing an empty EventMasks parameter would also result in no response being returned, this has been fixed as well while being preserved when the broken behavior is requested.
(closes issue #17023)
Reported by: nblasgen
Review: https://reviewboard.asterisk.org/r/602/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@257070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixing up a couple more overlapping global variable namespaces shared with
extensions.conf.sample. Also noticed a few of the lines that were commented
out didn't have the closing semi-colon so I added that as well.
(issue #17035)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@252761 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated the extensions.ael file so the global variables don't overlap
those that we have in extensions.conf (sample files). This way unexpected
things won't happed hopefully if both pbx_ael and res_config are loaded.
(closes issue #17035)
Reported by: pprindeville
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@252533 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated the extensions.ael file so the global variables don't overlap
those that we have in extensions.conf (sample files). This way unexpected
things won't happed hopefully if both pbx_ael and res_config are loaded.
(closes issue #17035)
Reported by: pprindeville
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@252531 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r252089 | twilson | 2010-03-12 16:04:51 -0600 (Fri, 12 Mar 2010) | 20 lines
Only change the RTP ssrc when we see that it has changed
This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@252175 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update the documentation in sip.conf.sample in order to make it more clear
that directmedia/canreinvite do not cause Asterisk to ignore reINVITEs. It
is only used to stop Asterisk from generating a reINVITE, but does not stop
it from accepting them if necessary.
(closes issue #15644)
Reported by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@226382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The shrinking of caller id removes '(', ' ', ')', non-trailing '.',
and '-' from the string. This means values such as 555.5555 and
test-test result in 555555 and testtest. There are instances,
such as Skype integration, where a specific value is passed via
caller id that must be preserved unmodified. This patch makes
the shrinking of caller id optional in chan_sip and chan_iax in
order to support such cases. By default this option is on to
preserve previous expected behavior.
(closes issue #15940)
Reported by: dimas
Patches:
v2-15940.patch uploaded by dimas (license 88)
15940_shrinkcallerid_trunk.c uploaded by dvossel (license 671)
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/408/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@225032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new field "portinuri" to the sip dialog struct and the sip peer struct. That field is used during RURI generation to determine if the port should be included in the RURI. It is also used in some places to determine if an SRV lookup should occur.
(closes issue #14418)
Reported by: klaus3000
Tested by: klaus3000, mnicholson
Review: https://reviewboard.asterisk.org/r/369/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@221360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Be default, change SSRC when doing an audio stream changes Asterisk doesn't
honor marker bit when reinvited to already-bridged RTP streams,resulting in
far-end stack discarding packets with "old" timestamps that areactually part of
a new stream. This patch sends AST_CONTROL_SRCUPDATE whenever there is a
reinvite, unless the 'constantssrc' is set to true in sip.conf.
The original issue reported to Digium support detailed the following situation:
ITSP <-> Asterisk 1.4.26.2 <-> SIP-based Application Server Call comes in
fromITSP, Asterisk dials the app server which sends a re-invite back
toAsterisk--not to negotiate to send media directly to the ITSP, but to
indicatethat it's changing the stream it's sending to Asterisk. The app
servergenerates a new SSRC, sequence numbers, timestamps, and sets the marker
bit on the new stream. Asterisk passes through the teimstamp of the new stream,
butdoes not reset the SSRC, sequence numbers, or set the marker bit.
When the timestamp on the new stream is older than the timestamp on the
originalstream, the ITSP (which doesn't know there has been any change) discards
the newframes because it thinks they are too old. This patch addresses this by
changing the SSRC on a stream update unless constantssrc=true is set in
sip.conf.
Review: https://reviewboard.asterisk.org/r/374/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@221086 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The issue at hand is that some legacy (dying) PBX systems send empty media frames on PRI
links *before* any call progress. The SIP channel receives these frames and by default
signals 183 Session progress and starts sending media. This will cause phones to
play silence and ignore the later 180 ringing message. A bad user experience.
The fix is twofold:
- We discovered that asterisk apps that support early media ("noanswer") did not send
any PROGRESS frame to indicate early media. Fixed.
- We introduce a setting in chan_sip so that users can disable any relay of media frames
before the outbound channel actually indicates any sort of call progress.
In 1.4, 1.6.0 and 1.6.1, this will be disabled for backward compatibility. In later versions
of Asterisk, this will be enabled. We don't assume that it will change your Asterisk
phone experience - only for the better.
We encourage third-party application developers to make sure that if they have applications
that wants to send early media, add a PROGRESS control frame transmission to make sure that
all channel drivers actually will start sending early media. This has not been the default
in Asterisk previous to this patch, so if you got inspiration from our code, you need to
update accordingly. Sorry for the trouble and thanks for your support.
This code has been running for a few months in a large scale installation (over 250
servers with PRI and/or BRI links to old PBX systems).
That's no proof that this is an excellent patch, but, well, it's tested :-)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@216430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are some VoIP providers out there that will not accept SDP
offers with odd numbered UDPTL ports. While it is my personal opinion
that these VoIP providers are misinterpreting RFC 2327, it really is
not a big deal to play along with their silly little games. Of course,
since restricting UDPTL ports to only even numbers reduces the range
of available ports by half, so the option to use only even port numbers
is off by default. A user can enable the behavior by setting
use_even_ports=yes in udptl.conf.
(closes issue #15182)
Reported by: CGMChris
Patches:
15182.patch uploaded by mmichelson (license 60)
Tested by: CGMChris
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@209131 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously overlap dialing could only be turned on or off for both incoming and
outgoing calls. New parameters incoming, outgoing, and both have been added to
allow further control. There is no change in default behavior with these new
options and allows in band DTMF to be accepted in one direction if required.
(closes issue #14471)
Reported by: eboscani
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@207092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(Note: This is not a new feature, it was previously undocumented and broken.)
The Asterisk logger has a feature to support absolute pathnames for logger channels, but the code implementing the feature was broken. This has been fixed, and the absolute path feature is now documented in the sample logger.conf.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@193193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After several issues raised on the Asterisk bugtracker against
the 1.4 branch were determined to be fixable with the state interface
change available in the 1.6.X series, it finally came time to just
suck it up and backport the change.
For a detailed explanation of what this change entails, the original
trunk commit for this feature may be found here:
http://svn.digium.com/view/asterisk?view=revision&revision=97203
In addition, the details for the use of this change to fix the problems
stated in issue #12970 may be found in the review request I made for
this change. It is linked below.
(closes issue #12970)
Reported by: edugs15
Review: http://reviewboard.digium.com/r/116
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@184980 65c4cc65-6c06-0410-ace0-fbb531ad65f3
