The chan_misdn channel driver will send a channel with an invalid destination
to the 'i' extension itself if said extension can be reached. It forgot,
however, to set the INVALID_EXTEN channel variable when it bounces the channel
to this extension. Dialplan writers everywhere moaned at yet another
inconsistency.
This is yet another example of why duplicating logic in multiple places results
in bugs that stick around in Jira for just under three years.
Yes: ASTERISK-15456 was created on January 18th, 2010. Patch committed on
January 15th, 2013. Ouch.
(closes issue ASTERISK-15456)
Reported by: Thomas Omerzu
patches:
chan_misdn_invalid.patch2 uploaded by Thomas Omerzu (license 5927)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@379145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r378933 was merged into 1.8, it should have also escaped
remote_display, since it will have the same XML encoding problem when
the caller/callee roles are reversed.
(closes issue ABE-2902)
Reported by: Guenther Kelleter
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@379001 65c4cc65-6c06-0410-ace0-fbb531ad65f3
XML encoding in chan_sip is accomplished by naively building the XML
directly from strings. While this usually works, it fails to take into
account escaping the reserved characters in XML.
This patch adds an 'ast_xml_escape' function, which works similarly to
'ast_uri_encode'. This is used to properly escape the local_display
attribute in XML formatted NOTIFY messages.
Several things to note:
* The Right Thing(TM) to do would probably be to replace the
ast_build_string stuff with building an ast_xml_doc. That's a much
bigger change, and out of scope for the original ticket, so I
refrained myself.
* It is with great sadness that I wrote my own ast_xml_escape
function. There's one in libxml2, but it's knee-deep in
libxml2-ness, and not easily used to one-off escape a
string.
* I only escaped the string we know is causing problems
(local_display). At least some of the other strings are
URI-encoded, which should be XML safe. Rather than figuring out
what's safe and escaping what's not, it would be much cleaner to
simply build an ast_xml_doc for the messages and let the XML
library do the XML escaping. Like I said, that's out of scope.
(closes issue ABE-2902)
Reported by: Guenther Kelleter
Tested by: Guenther Kelleter
Review: http://reviewboard.digium.internal/r/365/
........
Merged revision 378919 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@378933 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On a multihomed server when sending a NOTIFY message, we were not figuring out
which network should be used to contact the peer.
This patch fixes the problem by calling ast_sip_ouraddrfor() and then
build_via() so that our NOTIFY message contains the correct IP address.
Also, a debug message is being added to help follow the call-id changes that
occur. This was helpful for confirming that the IP address was set properly
since the call-id contains the IP address. It also will be helpful for
troubleshooting purposes when following a call in the debug logs.
(closes issue ASTERISK-20805)
Reported by: Bryan Hunt
Tested by: Bryan Hunt, Michael L. Young
Patches:
asterisk-20805-notify-ip-v2.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2255/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@378554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made agent_cont_sleep() and agent_ack_sleep() stop waiting if the wrapup
time expires. agent_cont_sleep() had tried but returned the wrong value
to stop waiting.
* Made agent_ack_sleep() take a struct agent_pvt pointer instead of a void
pointer for better type safety.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@378486 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix off-nominal path resource cleanup in agent_request().
* Create agent_pvt_destroy() to eliminate inlined versions in many places.
* Pull invariant code out of loop in add_agent().
* Remove redundant module user references in login_exec().
* Remove unused struct agent_pvt logincallerid[] member.
* Remove some redundant code in agent_request().
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@378456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk maintains an internal cache for devices in the event subsystem. The
device state cache holds the state of each device known to Asterisk, such that
consumers of device state information can query for the last known state for
a particular device, even if it is not part of an active call. The concept of
a device in Asterisk can include entities that do not have a physical
representation. One way that this occurred was when anonymous calls are allowed
in Asterisk. A device was automatically created and stored in the cache for
each anonymous call that occurred; this was possible in the SIP and IAX2
channel drivers and through channel drivers that utilized the
res_jabber/res_xmpp resource modules (Gtalk, Jingle, and Motif). These devices
are never removed from the system, allowing anonymous calls to potentially
exhaust a system's resources.
This patch changes the event cache subsystem and device state management to
no longer cache devices that are not associated with a physical entity.
(issue ASTERISK-20175)
Reported by: Russell Bryant, Leif Madsen, Joshua Colp
Tested by: kmoore
patches:
event-cachability-3.diff uploaded by jcolp (license 5000)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@378303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk had several places where messages received over various network
transports may be copied in a single stack allocation. In the case of TCP,
since multiple packets in a stream may be concatenated together, this can
lead to large allocations that overflow the stack.
This patch modifies those portions of Asterisk using TCP to either
favor heap allocations or use an upper bound to ensure that the stack will not
overflow:
* For SIP, the allocation now has an upper limit
* For HTTP, the allocation is now a heap allocation instead of a stack
allocation
* For XMPP (in res_jabber), the allocation has been eliminated since it was
unnecesary.
Note that the HTTP portion of this issue was independently found by Brandon
Edwards of Exodus Intelligence.
(issue ASTERISK-20658)
Reported by: wdoekes, Brandon Edwards
Tested by: mmichelson, wdoekes
patches:
ASTERISK-20658_res_jabber.c.patch uploaded by mmichelson (license 5049)
issueA20658_http_postvars_use_malloc2.patch uploaded by wdoekes (license 5674)
issueA20658_limit_sip_packet_size3.patch uploaded by wdoekes (license 5674)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@378269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This ensures that Asterisk rejects encrypted media streams (RTP/SAVP
audio and video) that are missing cryptographic keys and ensures that
the incoming SDP is consistent with RFC4568 as far as having a crypto
attribute present for any SAVP streams.
Review: https://reviewboard.asterisk.org/r/2204/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@378217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The chan_local module references were manually tied to the existence of
the ;1 and ;2 channel links.
* Made chan_local module references tied to the existence of the local_pvt
structure as well as automatically take care of the module references.
* Tweaked the wording of the local_fixup() failure warning message to make
sense.
Review: https://reviewboard.asterisk.org/r/2181/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@378088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now includes Min-SE in outbound INVITEs when the value is not
90 (the default) and session timers are not disabled. This has the
effect of Asterisk following RFC4028 more closely with regard to 422
responses and preventing situations in which Asterisk would be forced
to temporarily accept a call to tear it down based on a Session-Expires
below the locally configured Min-SE.
(issue SWP-5051)
Review: https://reviewboard.asterisk.org/r/2222/
Reported-by: Kinsey Moore
Patch-by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ensure that a call is immediately torn down if a Session-Expires value
received in a 200 OK is less than the local Min-SE. This also prevents
Asterisk from allowing calls with Session-Expires below the
RFC4028-mandated minimum (90s).
(closes issue ASTERISK-20653)
Review: https://reviewboard.asterisk.org/r/2237/
Patch-by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix code to send in both rx and tx open stream messages correct codecs. Found that on phase 0/1 phones wrong codecs cause to no audio in some situations.
(issue ASTERISK-20183)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377591 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During the TLS re-work in chan_sip some TLS specific code was moved
into a separate function. This function operates on a copy of the
incoming SIP request. This copy was never deinitialized causing a
memory leak for each request processed.
This function is now given a SIP request structure which it can use
to copy the incoming request into. This reduces the amount of memory
allocations done since the internal allocated components are reused
between packets and also ensures the SIP request structure is
deinitialized when the TLS connection is torn down.
(closes issue ASTERISK-20763)
Reported by: deti
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The principal behind this patch is simple. During a transfer,
we manipulate channels that are owned by a separate thread than
the one we currently are running in, so it makes sense that we
need to grab a reference to the channels so that they cannot
disappear out from under us.
In the wild, crashes were sometimes seen when the transferring
party would hang up the call before the transfer target answered
the call. The most common place to see the crash occur was when
attempting to send a connected line update to the transferer
channel.
(closes issue ASTERISK-20226)
Reported by Jared Smith
Patches:
ASTERISK-20226.patch uploaded by Mark Michelson (License #5049)
Tested by: Jared Smith
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For 1.8, 10, 11 and trunk we are are improving the code readability.
For 11 and trunk, auto nat detection was added. The natdetected flag was being
set to 1 when the host address in the VIA header did not specifiy a port. This
patch fixes this by setting the port on the temporary sock address used to
SIP_STANDARD_PORT in order for the sock address comparison to work properly.
(closes issue ASTERISK-20724)
Reported by: Michael L. Young
Patches:
asterisk-20724-set-port-v2.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2206/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a SS7 call comes in requesting a CIC that is in-alarm, the call is
accepted and connects if the extension exists in the dialplan. The call
does not have any audio.
* Made release the call immediately with circuit congestion cause.
(closes issue ASTERISK-20204)
Reported by: Tuan Le
Patches:
jira_asterisk_20204_v1.8.patch (license #5621) patch uploaded by rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376058 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this change, a common method for determining if a timeout
was reached was to call a function such as ast_waitfor_n() and inspect
the out parameter that told how many milliseconds were left, then use
that as the input to ast_waitfor_n() on the next go-around.
The problem with this is that in some cases, submillisecond timeouts
can occur, resulting in the out parameter not decreasing any. When this
happens thousands of times, the result is that the timeout takes much
longer than intended to be reached. As an example, I had a situation where
a 3 second timeout took multiple days to finally end since most wakeups
from ast_waitfor_n() were under a millisecond.
This patch seeks to fix this pattern throughout the code. Now we log the
time when an operation began and find the difference in wall clock time
between now and when the event started. This means that sub-millisecond timeouts
now cannot play havoc when trying to determine if something has timed out.
Part of this fix also includes changing the function ast_waitfor() so that it
is possible for it to return less than zero when a negative timeout is given
to it. This makes it actually possible to detect errors in ast_waitfor() when
there is no timeout.
(closes issue ASTERISK-20414)
reported by David M. Lee
Review: https://reviewboard.asterisk.org/r/2135/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, if an acknowledgement of a timer fails Asterisk will not realize
that a serious error occurred and will continue attempting to use the timer's
file descriptor. This can lead to situations where errors stream to the
CLI/log file. This consumes significant resources, masks the actual problem
that occurred (whatever caused the timer to fail in the first place), and
can leave channels in odd states.
This patch propagates the errors in the timing resource modules up through
the timer core, and makes users of these timers handle acknowledgement
failures. It also adds some defensive coding around the use of timers
to prevent using bad file descriptors in off nominal code paths.
Note that the patch created by the issue reporter was modified slightly for
this commit and backported to 1.8, as it was originally written for
Asterisk 10.
(issue ASTERISK-20032)
Reported by: Jeremiah Gowdy
patches:
jgowdy-timerfd-6-22-2012.diff uploaded by Jeremiah Gowdy (license 6358)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r375519 | rmudgett | 2012-10-30 16:06:15 -0500 (Tue, 30 Oct 2012) | 11 lines
chan_misdn: Timer primitives must be handled first.
The frm->addr is a different "address space" than the stack/instance
address of other Lx primitives. The test for B channel instance address
could fail.
Patches:
patch01_timers.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2888
........
r375520 | rmudgett | 2012-10-30 16:14:58 -0500 (Tue, 30 Oct 2012) | 10 lines
chan_misdn: Free memory in error paths and other memory leaks.
The one line commented with BUG is not easily fixable because there is no
de-init function one can call.
Patches:
patch02_memory.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2888
........
r375521 | rmudgett | 2012-10-30 16:38:41 -0500 (Tue, 30 Oct 2012) | 14 lines
chan_misdn: ISDN NT L2 de-establish/establish
* An NT-PTMP cannot de/establish L2 since it doesn't know the TEIs.
* On NT-PTP L2 is started when L1 is finally active in handle_l1.
* L2 deactivation logging cleanup.
* L2 aggregate link status is unknown for NT-PTMP, show as "UNKN".
* Removed unused functions and code for L2 handling.
Patches:
patch03_L2estab.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
JIRA ABE-2888
........
r375522 | rmudgett | 2012-10-30 16:56:14 -0500 (Tue, 30 Oct 2012) | 22 lines
chan_misdn: Fix broken upper_id/lower_id usage.
Sending PH prim via lower_id layer (3 or 1) simply does not work. For TE
(3) it returns an error (len=-6) which is not evaluated by handle_l1(), so
the L1 layer status ends up wrong. Instead PH must be sent via L4, only
then does it reach L1 without an error message.
And NT PH prims only reach L1 when they are sent to layer 2 id.
--> use upper_id to send PH primitives.
* Check for errors in PH_(DE)ACTIVATE | CONFIRM.
* Debug messages are improved.
* The lower_id is now not used for anything, except: Why is lower_id layer
deleted when it wasn't created? I removed this code since it looks very
wrong.
Patches:
patch04_l1activation.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2888
........
r375523 | rmudgett | 2012-10-30 17:29:15 -0500 (Tue, 30 Oct 2012) | 31 lines
chan_misdn: Fix loss of B channels if L1 is down.
If you make 2 calls out an NT PTMP port which is not connected to any
phone, the B channel associated with that call becomes unusable until
Asterisk is restarted.
The problem is the EVENT_SETUP is queued when L1 is not up in
misdn_lib_send_event(). If L1 cannot be activated the event won't be
dequeued. It gets even worse when the call is hung up. The queued
EVENT_SETUP will be overwritten by an EVENT_DISCONNECT. The reserved B
channel then will never be freed. If later someone connects a phone to
the port, L1 will eventually activate and the queued EVENT_DISCONNECT is
sent down the stack. However, it is ignored because it is the wrong call
state.
The real fix would be that activation and queueing for a new SETUP is done
by the NT stack. But since it doesn't, the workaround must be removed
because it doesn't always work.
Fix: The event is no longer queued but immediately sent to the stack. If
L1 cannot be activated, the L3 state machine that was started by the
EVENT_SETUP will do its work, i.e. a timeout will release the B channel
properly. The SETUP possibly cannot be sent the first time but is resent
by T303 in case L1 could be activated.
Patches:
patch05_bchan-loss.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
JIRA ABE-2888
........
r375524 | rmudgett | 2012-10-30 18:26:05 -0500 (Tue, 30 Oct 2012) | 13 lines
chan_misdn: Remove some calls to exit().
Try proper cleanup when something goes wrong in misdn_lib_init().
Especially do not call exit()!
* Fix memory leak because stack_destroy() does not free the stack struct.
Patches:
patch06_cleanup-init.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
JIRA ABE-2888
........
Merged revisions 375519-375524 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375625 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While looking at some debug logs, I noticed that it was being reported that the
SDP origin line was unsupported or failed. Upon looking into this on my local
machine, I found that I too was getting this debug message yet everything seemed
to be getting processed properly. What was discovered is, that, the variable to
determine what is displayed in the debug message for the SDP line that was
processed, was not being set for the origin line when the result was successful.
This patch fixes this and was tested on local machine.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375594 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a "sip reload" is issued for a SIP peer, then his
IP address will be cleared, thus resulting in forgetting the
public IP address. Asterisk will then attempt to route SIP
traffic to the private IP address.
The fix here is to make "sip reload" ignore realtime peers
when "host = dynamic" is spotted. Realtime peers can now only
have their IP address reset if they have gone from being not
dynamic to being dynamic.
(closes issue ASTERISK-18203)
reported by daren ferreira
(closes issue ASTERISK-20572)
reported by JoshE
Patches:
fix_nat_realtime.diff uploaded by JoshE (license #6075)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375415 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The tech support customer was using the AMI Redirect action shortly after
a call was placed. While the channel tried to do an ast_read(), the
masquerade resulting from the channel redirect took place. The masquerade
in the middle of the ast_read() resulted in the segfault.
(closes issue AST-1025)
Reported by: Trey Blancher
Patches:
jira_ast_1025_v1.8_v2.patch (license #5621) patch uploaded by rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Passing an ast_str pointer by value that then calls
ast_str_set(), ast_str_set_va(), ast_str_append(), or
ast_str_append_va() can result in the pointer originally
passed by value being invalidated if the ast_str had
to be reallocated.
This fixes places in the code that do this. Only the
example in ccss.c could result in pointer invalidation
though since the other cases use a stack-allocated ast_str
and cannot be reallocated.
I've also updated the doxygen in strings.h to include
notes about potential misuse of the functions mentioned
previously.
Review: https://reviewboard.asterisk.org/r/2161
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375025 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is used to solve an issue where a poll on a file
descriptor does not necessarily correspond to the readiness
of a FILE handle to be read.
This change makes it so that for TCP connections, we do a
recv() on the file descriptor instead.
Because TCP does not guarantee that an entire message or even
just one single message will arrive during a read, a loop has
been introduced to ensure that we only attempt to handle a
single message at a time. The tcptls_session_instance structure
has also had an overflow buffer added to it so that if more
than one TCP message arrives in one go, there is a place to
throw the excess.
Huge thanks goes out to Walter Doekes for doing extensive review
on this change and finding edge cases where code could fail.
(closes issue ASTERISK-20212)
reported by Phil Ciccone
Review: https://reviewboard.asterisk.org/r/2123
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@374905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
................
r374515 | rmudgett | 2012-10-04 17:52:36 -0500 (Thu, 04 Oct 2012) | 10 lines
chan_misdn: Remove some deadcode
* Made setup_bc() static.
Patches:
patch1_unused-code.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
JIRA ABE-2882
................
r374516 | rmudgett | 2012-10-04 18:01:01 -0500 (Thu, 04 Oct 2012) | 7 lines
chan_misdn: Remove unused bchan states
Patches:
patch2_unused-states.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374517 | rmudgett | 2012-10-04 18:17:51 -0500 (Thu, 04 Oct 2012) | 16 lines
chan_misdn: Remove unnecessary null pointer checks and checks for stack->nt
* cleanup_bc() is always called with valid bc (or it would've crashed
before).
* Value of stack->nt is known in advance at some places.
* Rename handle_event() to handle_event_te(), handle_frm() to
handle_frm_te().
Patches:
patch3_checks.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
JIRA ABE-2882
................
r374518 | rmudgett | 2012-10-04 18:21:59 -0500 (Thu, 04 Oct 2012) | 7 lines
chan_misdn: Fix spelling in log messages
Patches:
patch4_spelling.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374519 | rmudgett | 2012-10-04 18:31:59 -0500 (Thu, 04 Oct 2012) | 15 lines
chan_misdn: Don't cleanup a bc twice.
In handle_frm_te() after calling misdn_lib_send_event(bc,
EVENT_RELEASE_COMPLETE) bc is emptied, cleaned and set not in use,
although misdn_lib_send_event() already did the same. This is bad. When
it's not in use we are not allowed to touch it.
* Moved log message in front of the resulting actions and fixed it to
match the case.
Patches:
patch5_bccleanup.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374520 | rmudgett | 2012-10-04 18:43:56 -0500 (Thu, 04 Oct 2012) | 12 lines
chan_misdn: Fix memory leaks, bc, chan not cleaned up etc., really bad stuff.
* Fix return codes of cb_events() for EVENT_SETUP to use caller's cleanup
mechanisms.
* Move cl_queue_chan() call after bearer check.
Patches:
patch6_leaks.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374521 | rmudgett | 2012-10-04 18:48:38 -0500 (Thu, 04 Oct 2012) | 11 lines
chan_misdn: We must initialize cause on sending a DISCONNECT.
We must initialize cause on sending a DISCONNECT, so it is later correctly
indicated to ast_channel in case the answer (RELEASE/RELEASE_COMPLETE)
does not include one.
Patches:
patch7_hangupcause.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374522 | rmudgett | 2012-10-04 19:03:56 -0500 (Thu, 04 Oct 2012) | 7 lines
chan_misdn: Remove unused code for upqueue
Patches:
patch8_unused-upqueue.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374523 | rmudgett | 2012-10-04 19:11:50 -0500 (Thu, 04 Oct 2012) | 7 lines
chan_misdn: Improve debugging (port number, messages fixed, dups removed)
Patches:
patch9_debug.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374533 | rmudgett | 2012-10-05 12:17:18 -0500 (Fri, 05 Oct 2012) | 8 lines
chan_misdn: Better debug: we can print_bc_info even if there's no ast leg.
Patches:
patch10_debug-bc-2.diff (license #6372) patch uploaded by Guenther Kelleter
Modified.
JIRA ABE-2882
................
r374534 | rmudgett | 2012-10-05 12:34:10 -0500 (Fri, 05 Oct 2012) | 16 lines
chan_misdn: setup_bc() is called too early for an incoming SETUP on TE.
This prevents the B channel from being setup for HDLC mode when requested
by the bearer capability and config option hdlc=yes. It violates
ETS300102 Ch.5.2.3.2: "The user, in any case, must not connect to the
channel until a CONNECT ACKNOWLEDGE message has been received."
* Call setup_bc() on receipt of CONNECT_ACKNOWLEGDE for PTMP, and on first
response to SETUP for PTP.
Patches:
abe-2881-2.diff (license #6372) patch uploaded by Guenther Kelleter
Modified.
JIRA ABE-2881
................
r374535 | rmudgett | 2012-10-05 12:41:05 -0500 (Fri, 05 Oct 2012) | 2 lines
chan_misdn: Remove some more deadcode.
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@374536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A check was added for direct media ACLs that immediately forbid remote bridging if there
was no bridged channel. This caused directrtpsetup to no longer function as it needs this
information before bridging actually occurs.
Logic has now been adjusted so if there is no bridged channel a remote bridge will still
be attempted.
(closes issue ASTERISK-20511)
Reported by: kristoff
Review: https://reviewboard.asterisk.org/r/2146/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@374456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The chan_local channel driver returns a device state of in use even if a created Local
channel has not yet been dialed. This fix changes the logic to return a state of not
in use until the channel itself has been dialed.
(closes issue ASTERISK-20390)
Reported by: tim_ringenbach
Review: https://reviewboard.asterisk.org/r/2116/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@373878 65c4cc65-6c06-0410-ace0-fbb531ad65f3
multiplelogin was removed from chan_agent back in 1.6.0 when
AgentCallbackLogin() was removed.
(closes issue AST-948)
reported by Steve Pitts
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@373768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Users of the T.38 API can indicate AST_T38_REQUEST_PARMS on a channel to request that the
channel indicate a T.38 negotiation with the parameters present on the channel. The return
value of this indication is expected to be AST_T38_REQUEST_PARMS upon success but with
chan_local involved this could never occur.
This fix changes chan_local to always return AST_T38_REQUEST_PARMS for this situation. If
the underlying channel technology on the other side does not support T.38 this would have
been determined ahead of time using ast_channel_get_t38_state and an indication would
not occur.
(closes issue ASTERISK-20229)
Reported by: wdoekes
Patches:
ASTERISK-20229.patch uploaded by wdoekes (license 5674)
Review: https://reviewboard.asterisk.org/r/2070/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@373705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP session timer mechanism contains a mandatory 'refresher' parameter
(included in the Session-Expires header) which is used in the session timer
offer/answer signaling within a SIP Invite dialog. It looks like asterisk is
interpreting the uac resp. uas role only as the initial role of client and
server (caller is uac, callee is uas). The standard rfc 4028 however assigns
the client role to the ((RE)-Invite) requester, the server role to the
((RE)-Invite) responder.
This patch has Asterisk track the actual refresher as "us" or "them" as opposed
to relying on just the configured "uas" or "uac" properties.
(closes issue AST-922)
Reported by: Thomas Airmont
Review: https://reviewboard.asterisk.org/r/2118/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@373652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When setting CALLERID(pres)=unavailable in the dialplan, the From header
in the SIP message contains "Anonymous" <sip:Anonymous@anonymous.invalid>.
For consistency, Asterisk should use a lowercase a in the userpart of the
URI.
* Make the From header use a lowercase A in the userpart of the anonymous
URI.
(closes issue ASTERISK-19838)
Reported by: Antti Yrjola
Patches:
chan_sip_patch_ASTERISK-19838.patch (license #6383) patch uploaded by Antti Yrjola
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@373500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If conditions were right it was possible for both the PBX core and chan_sip to deadlock by both having a lock that the other
wants. In the case of the PBX core it had the contexts lock and wanted a SIP dialog lock, while in the case of chan_sip it
had the SIP dialog lock and wanted the contexts lock.
This fix unlocks the SIP dialog before getting the extension state so that the other thread will not block on trying to lock
it. Once the extension state is retrieved the SIP dialog is locked again and life carries on.
As the SIP dialog is reference counted it is not possible for it to go away after unlocking.
(closes issue ASTERISK-20437)
Reported by: jhutchins
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@373438 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk v1.8 and later was not as vulnerable to this issue.
* Made find_call() lock each private as it processes the found dialogs.
(Primary cause of ABE-2876)
* Made the other functions that traverse the dialogs container lock each
private as it examines them.
* Fix race condition in sip_call() if the thread that sent the INVITE is
held up long enough for a response to be processed. The p->initid for the
INVITE retransmission could be added after it was canceled by the response
processing.
* Made __sip_destroy() clean up resource pointers after freeing. This is
primarily defensive in case someone has a stale private pointer.
* Removed redundant memset() in reqprep(). The call to init_req() already
does the memset() and is the first reference to req in reqprep().
* Removed useless set of req.method in transmit_invite(). The calls to
initreqprep() and reqprep() have to do this because they memset() the req.
JIRA ABE-2876
..........
Merged -r373423 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@373424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
