The purpose of this branch was to take into account
"burps" which could cause jitterbuffers to misbehave.
One such example is if the L option to Dial() were used
to inject audio into a bridged conversation at regular
intervals. Since the audio here was not passed through
the jitterbuffer, it would cause a gap in the jitterbuffer's
timestamps which would cause a frames to be dropped for a
brief period.
Now ast_generic_bridge will empty and reset the jitterbuffer
each time it is called. This causes injected audio to be handled
properly.
ast_generic_bridge also will empty and reset the jitterbuffer
if it receives an AST_CONTROL_SRCUPDATE frame since the change
in audio source could negatively affect the jitterbuffer.
All of this was made possible by adding a new public API call
to the abstract_jb called ast_jb_empty_and_reset.
(closes issue #11259)
Reported by: plack
Tested by: putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@135841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@135799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
targeting areas where an unknown and potentially
long time has just elapsed. Also added a check
to try_calling() to return early if the timeout
has elapsed instead of potentially setting a negative
timeout for the call (thus making it have *no* timeout
at all).
(closes issue #13186)
Reported by: miquel_cabrespina
Patches:
13186.diff uploaded by putnopvut (license 60)
Tested by: miquel_cabrespina
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@134758 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The main aim of this branch was to make the IMAP
code function in the same manner as the ODBC code
does, eliminating the need for so many IMAP-specific
code chunks. The focal point of all of this work was
to make the various macros (e.g. RETRIEVE, DISPOSE)
functionally equivalent.
While doing the above work, I also fixed a few bugs
that I came across in my testing. Among these were
1. Fixed message forwarding. This was completely
broken when using IMAP.
2. Fixed the inability to save new messages as old
and vice versa.
3. Fixed the "delete" options in voicemail.conf when
using IMAP storage.
Even though a few bugs were fixed and the code is
a lot more consistent, the one thing that was *not*
improved in this branch was performance.
The merge of this to trunk may not come immediately
due to the amount of work it will probably involve.
(closes issue #12764)
Reported by: balsamcn
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@134223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_chanspy should be set at load time, not at compile
time, since dahdi_chan_name is determined at load time.
Also changed the next_unique_id_to_use to have the
static qualifier.
Also added the dahdi_chan_name_len variable so that
strlen(dahdi_chan_name) isn't necessary. Thanks to
seanbright for the suggestion.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@133169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
correct registration of AMI actions in chan_dahdi; in zap-only mode, only register the Zap flavors of the actions (and use Zap prefixes for headers and acks), but in dahdi+zap mode, register both Zap and DAHDI flavors of actions
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@132787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sept 12 last year). It was moved then to prevent a memory leak.
Since then, the same memory leak recurred and was fixed in a
better way.
Now it has been found that the placement of this init_queue
call can cause problems if a realtime queue has values changed
to an empty string. The problem is that the default value
for that queue parameter would not be set.
(closes issue #13084)
Reported by: elbriga
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@131369 65c4cc65-6c06-0410-ace0-fbb531ad65f3
is removed from the calling channel once the caller
is finished in the queue. This could have weird con-
sequences when dialing local queue members when multiple
transfers occur on a single call.
Also fixed a memory leak that would occur when an
attended transfer occurred from a queue member.
(closes issue #13047)
Reported by: festr
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@131299 65c4cc65-6c06-0410-ace0-fbb531ad65f3
be sure there are no audiohooks present on the channels
involved. This fixed a one-way audio situation I had in
my test setup. I couldn't find any open issues that suggested
one-way audio with regards to mixmonitor (or other audiohook)
usage, though.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@130792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
since it should solve bugs people are experiencing. Specifically,
there are times where communication with the IMAP server causes
system calls to block forever. If this should happen when querying
the mailbox so that chan_sip's do_monitor thread can send MWI to
a phone, it means that SIP calls cannot be processed any more.
The timeout options are outlined in doc/imapstorage.txt. Defaults
for the timeouts are sixty seconds.
(closes issue #12987)
Reported by: mthomasslo
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@129158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
so that it can easily be associated with a queue member's name. This helps
so that the appropriate queue member can be removed or paused since the
interface is required, not the member's name.
(closes issue #12783)
Reported by: davevg
Patches:
app_queue.diff uploaded by davevg (license 209) with small mod from me
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@125585 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows for attended transfers to be logged in the
queue_log the same way that blind transfers have always been.
It was decided by popular opinion on the asterisk-dev mailing
list that this should be backported to 1.4. Thanks to everyone
who gave an opinion.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@125530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
information for realtime queues instead of giving up-to-date
info. Now realtime is queried for the latest and greatest in
queue info.
(closes issue #12858)
Reported by: bcnit
Patches:
queue_show.patch uploaded by putnopvut (license 60)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@125476 65c4cc65-6c06-0410-ace0-fbb531ad65f3
don't include tonezone.h in dahdi_compat.h, because only a couple of modules need it
get app_rpt building again after the DAHDI changes
(closes issue #12911)
Reported by: tzafrir
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@125132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
be stripped prior to placing CallerID in the headers of an email.
(closes issue #12759)
Reported by: RobH
Patches:
20080602__bug12759__2.diff.txt uploaded by Corydon76 (license 14)
Tested by: RobH
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@124910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: chris-mac
Sorry, my testing did not contain the simple case of forkCDR(v),
I am much embarrassed to admit. If I had, I would have
more solidly initialized the opts element for varset.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@124540 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_queue does not use "boxcar" filtering as the comments
say. The term "boxcar" means that the number of samples used
to calculate stays constant, with new samples replacing the
oldest ones. The queue holdtime calculation uses all holdtime
samples collected since the queue was loaded, so the comment
has been changed to be accurate.
(closes issue #12781)
Reported by: davidw
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@123274 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: arkadia
Tested by: murf, arkadia
Options added to forkCDR() app and the CDR() func to
remove some roadblocks for CDR applications.
The "show application ForkCDR" output was upgraded
to more fully explain the inner workings of forkCDR.
The A option was added to forkCDR to force the
CDR system to NOT change the disposition on the
original CDR, after the fork. This involves
ast_cdr_answer, _busy, _failed, and so on.
The T option was added to forkCDR to force
obedience of the cdr LOCKED flag in the
ast_cdr_end, all the disposition changing
funcs (ast_cdr_answer, etc), and in the
ast_cdr_setvar func.
The CHANGES file was updated to explain ALL
the new options added to satisfy this bug report
(and some requests made verbally and via
email, irc, etc, over the past months/year)
The 's' option was added to the CDR() func,
to force it to skip LOCKED cdr's in the
chain.
Again, the new options should be totally transparent
to existing apps! Current behavior of CDR,
forkCDR, and the rest of the CDR system should
not change one little bit. Until you add the
new options, at least!
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@122046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
