........
r402345 | kmoore | 2013-11-01 05:31:49 -0700 (Fri, 01 Nov 2013) | 11 lines
chan_sip: Fix RTCP port for SRFLX ICE candidates
This corrects one-way audio between Asterisk and Chrome/jssip as a
result of Asterisk inserting the incorrect RTCP port into RTCP SRFLX
ICE candidates. This also exposes an ICE component enumeration to
extract further details from candidates.
(closes issue ASTERISK-21383)
Reported by: Shaun Clark
Review: https://reviewboard.asterisk.org/r/2967/
........
r405234 | kharwell | 2014-01-09 08:49:55 -0800 (Thu, 09 Jan 2014) | 19 lines
res_rtp_asterisk: Fails to resume WebRTC call from hold
In ast_rtp_ice_start if the ice session create check list failed, start check
was never initiated and ice_started was never set to true. Upon re-entering
the function (for instance, [un]hold) it would try to create the check list
again with duplicate remote candidates.
Fixed so that if the create check list fails the necessary data structures
are properly re-initialized for any subsequent retries.
Note, it was decided to not stop ice support (by calling ast_rtp_ice_stop) on a
check list failure because it possible things might still work. However, a
debug message was added to help with any future troubleshooting.
(closes issue ASTERISK-22911)
Reported by: Vytis Valentinavičius
Patches:
works_on_my_machine.patch uploaded by xytis (license 6558)
........
r409129 | jrose | 2014-02-27 11:19:02 -0800 (Thu, 27 Feb 2014) | 15 lines
res_rtp_asterisk: Fix checklist creating problems in ICE sessions
Prior to this patch, local candidate lists including SRFLX would fail to start
properly when building ICE candidate check lists. This patch fixes that problem
by making sure that each SRFLX candidate is associated with the proper
base address so that the check list can create matches properly.
This patch was written by jcolp. The issue will be left open to await testing
by the issue participants.
(issue ASTERISK-23213)
Reported by: Andrea Suisani
Review: https://reviewboard.asterisk.org/r/3256/
........
r409130 | jrose | 2014-02-27 11:38:10 -0800 (Thu, 27 Feb 2014) | 8 lines
res_rtp_asterisk: correct build error from r409129
Accidentally placed a declaration below functional code
(issue ASTERISK-23213)
Reported by: Andrea Suisani
Review: https://reviewboard.asterisk.org/r/3256/
........
r409565 | jrose | 2014-03-04 08:40:39 -0800 (Tue, 04 Mar 2014) | 9 lines
res_rtp_asterisk: Fix one way audio problems with hold/unhold when using ICE
ICE sessions will now be restarted if sessions are changed to use new sets of
remote candidates.
(closes issue ASTERISK-22911)
Reported by: Vytis Valentinavičius
Review: https://reviewboard.asterisk.org/r/3275/
........
r413008 | mjordan | 2014-04-25 10:47:21 -0700 (Fri, 25 Apr 2014) | 14 lines
res_rtp_asterisk: Add support for DTLS handshake retransmissions
On congested networks, it is possible for the DTLS handshake messages to get
lost. This patch adds a timer to res_rtp_asterisk that will periodically
check to see if the handshake has succeeded. If not, it will retransmit the
DTLS handshake.
Review: https://reviewboard.asterisk.org/r/3337
ASTERISK-23649 #close
Reported by: Nitesh Bansal
patches:
dtls_retransmission.patch uploaded by Nitesh Bansal (License 6418)
........
r417141 | file | 2014-06-23 11:49:14 -0700 (Mon, 23 Jun 2014) | 5 lines
res_rtp_asterisk: Return the length of data written when sending via ICE instead of 0.
ASTERISK-23834 #close
Reported by: Richard Kenner
........
r417677 | file | 2014-06-30 12:42:18 -0700 (Mon, 30 Jun 2014) | 12 lines
res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP.
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip have also been added to allow behavior
to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
........
Merged revisions 402345,405234,409129-409130,409565,413008,417141,417677 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/11.6@417724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Simply establishing a TCP connection and never sending anything to the
configured HTTP port in http.conf will tie up a HTTP connection. Since
there is a maximum number of open HTTP sessions allowed at a time you can
block legitimate connections.
A similar problem exists if a HTTP request is started but never finished.
* Added http.conf session_inactivity timer option to close HTTP
connections that aren't doing anything. Defaults to 30000 ms.
* Removed the undocumented manager.conf block-sockets option. It
interferes with TCP/TLS inactivity timeouts.
* AMI and SIP TLS connections now have better authentication timeout
protection. Though I didn't remove the bizzare TLS timeout polling code
from chan_sip.
* chan_sip can now handle SSL certificate renegotiations in the middle of
a session. It couldn't do that before because the socket was non-blocking
and the SSL calls were not restarted as documented by the OpenSSL
documentation.
* Fixed an off nominal leak of the ssl struct in
handle_tcptls_connection() if the FILE stream failed to open and the SSL
certificate negotiations failed.
The patch creates a custom FILE stream handler to give the created FILE
streams inactivity timeout and timeout after a specific moment in time
capability. This approach eliminates the need for code using the FILE
stream to be redesigned to deal with the timeouts.
This patch indirectly fixes most of ASTERISK-18345 by fixing the usage of
the SSL_read/SSL_write operations.
ASTERISK-23673 #close
Reported by: Richard Mudgett
........
Merged revisions 415841 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415854 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/11.6@415977 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Establishing an IAX2 call between Asterisk v1.4 and v1.8 (or later)
results in an unexpected call disconnect. The problem happens because
newer values in the enum ast_control_frame_type are not consistent between
the branch versions of Asterisk.
For example:
1) v1.4 calls v1.8 (or later) using IAX2
2) v1.8 answers and sends a connected line update control frame. (on v1.8
AST_CONTROL_CONNECTED_LINE = 22)
3) v1.4 receives the control frame as an end-of-q (on v1.4
AST_CONTROL_END_OF_Q = 22)
4) v1.4 disconnects the call once the receive queue becomes empty.
Several things are done by this patch to fix the problem and attempt to
prevent it from happening again in the future:
* Added a warning at the definition of enum ast_control_frame_type about
how to add new control frame values.
* Made block sending and receiving control frames that have no reason to
go over the wire.
* Extended the connectedline iax.conf parameter to also include the
redirecting information updates.
* Updated the connectedline iax.conf parameter documentation to include a
notice that the parameter must be "no" when the peer is an Asterisk v1.4
instance.
(closes issue AST-1302)
Review: https://reviewboard.asterisk.org/r/3174/
........
Merged revisions 407678 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 407727 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/11.6@407746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
........
Merged revisions 405431 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/11.6@405488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows individual dialplan functions to be marked as
'dangerous', to inhibit their execution from external sources.
A 'dangerous' function is one which results in a privilege escalation.
For example, if one were to read the channel variable SHELL(rm -rf /)
Bad Things(TM) could happen; even if the external source has only read
permissions.
Execution from external sources may be enabled by setting
'live_dangerously' to 'yes' in the [options] section of asterisk.conf.
Although doing so is not recommended.
(closes issue ASTERISK-22905)
Review: http://reviewboard.digium.internal/r/432/
........
Merged revisions 403913 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 403917 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/11.6@403956 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The denoise filter requires func_speex, not codec_speex. Fix this in the
description of the denoise=yes option in confbridge.conf.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ring tone provided in the sample indications.conf was incorrect. This patch
modifies the sample ring tone to be what it should:
ring = 425/400,0/200,425/400,0/2000
This brings it in line with the tone definition in DAHDI 2.7.0. (zonedata.c)
(closes issue ASTERISK-21997)
Reported by: Filip Jenicek
patches:
malaysia_ring.patch uploaded by phill (License 6277)
........
Merged revisions 394940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@394941 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SLA code within app_meetme was written before asotbj2 had been
merged into Asterisk. Worse, support for reloads did not exist at first
and was added later as a bolt-on feature. I knew at the time that
reloading was not safe at all while SLA was in use, so the reload would
be queued up to execute when the system was idle. Unfortunately, this
approach was still prone to errors beyond the fact that this was the
only place in Asterisk where configuration was not reloaded
instantly when requested.
This patch converts various SLA objects to be reference counted objects
using astobj2. This allows reloads to be processed while the system is
in use. The code ensures that the objects will not disappear while one
of the other threads is using them. However, they will be immediately
removed from the global trunk and station containers so no new calls
will use them if removed from configuration.
Review: https://reviewboard.asterisk.org/r/2581/
........
Merged revisions 393928 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@393929 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r386792, the ability to play prompts to the first caller in a call queue was
added. While this is arguably a bug fix for those who expect the first caller
to continue receiving prompts while the agent is dialed, it has the side effect
of preventing the first caller from hearing the agent immediately upon
bridging. This may not be a problem for those who really want this option, but
for those who didn't care whether or not the first caller in queue heard their
position, it was an issue.
This patch disables the ability for the first caller in the queue to hear
prompts and adds a new option, announce-to-first-user, to queues.conf. Those
who the behavior can enable it by setting this value to True.
Note that if we ever implement the ability to have the prompts be stopped
upon bridging, this option can be removed.
(closes issue ASTERISK-21782)
Reported by: Remi Quezada
........
Merged revisions 391215 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@391241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added a line showing the mapping of "mysql" to res_config_mysql available in add-ons. We used "mysql" as an example driver key in the sample, but didn't show what module it mapped too. Also added a subtitle above the list of keys for driver backends.
........
Merged revisions 385047 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@385048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new inband_on_proceeding option causes Asterisk to assume inband audio
may be present when a PROCEEDING message is received.
Q.931 Section 5.1.2 says the network cannot assume that the CPE side has
attached to the B channel at this time without explicitly sending the
progress indicator ie informing the CPE side to attach to the B channel
for audio. However, some non-compliant ISDN switches send a PROCEEDING
without the progress indicator ie indicating inband audio is available and
assume that the CPE device has connected the media path for listening to
ringback and other messages.
ASTERISK-17834 which causes this issue was dealing with a non-compliant
network switch.
(closes issue ASTERISK-21151)
Reported by: Gianluca Merlo
Tested by: rmudgett
........
Merged revisions 384685 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@384689 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ConfBridge and Page require that there always be a default bridge and user
profile available. While properties of the default profiles can be overriden
in the configuration file, removing them can create situations where neither
application can function properly.
This patch ensures that if an administrator removes the profiles from the
confbridge.conf configuration file, the profiles are added upon load.
Documentation clarifying this has been added to the confbridge.conf.sample file.
Review: https://reviewboard.asterisk.org/r/2356/
(closes issue AST-1115)
Reported by: John Bigelow
Tested by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382066 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ringinuse=no queue members can receive more than one call if these
calls happen at nearly the same time.
* Fix so a queue member does not receive more than one call from a queue.
NOTE: This fix does not prevent multiple calls to a member if the member
is in more than one queue.
* Did some refactoring to eliminate some code redundancy.
(issue ASTERISK-16115)
Reported by: nik600
Patches:
jira_asterisk_16115_single_q_v1.8.patch (license #5621) patch uploaded by rmudgett
Modified
* Revert the -r341580 and -r341599 changes adding the queues.conf
check_state_unknown option as it was added in an attempt to fix this
problem. The fix did not need to be optional. The fix should not have
tried to explicitly set the device state. Setting the device state by
something other than the device introduces a race condition. I also could
not see how the change would be effective other than delaying the
app_queue code long enough for the device state to propagate to app_queue.
........
Merged revisions 378663 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378683 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@378687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Based on feedback from numerous individuals this patch tweaks incoming calls
to first look for an extension with the name of the endpoint. If no such extension
exists the call will silently fall back to the "s" extension as it previously
did.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376983 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With ICE support enabled in chan_sip and a large number of interfaces on the system it was
possible for the produced SDP to be truncated due to some fixed size buffers. These buffers
have now been changed so they will dynamically grow as needed.
ICE support is now also enabled by default in res_rtp_asterisk to provide a smoother experience
for chan_motif users where it is required. To maintain the previous behavior in chan_sip it is
no longer enabled by default there.
(closes issue ASTERISK-20643)
Reported by: coopvr
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A regression was introduced in chan_sip by changes to sip reload introduced by
r349097. That patch moved peer purging from the beginning of the reload to
after the general configuration was finished. This patch fixes that by undoing
the repositioning of the original peer purging code and using a similar
function after performing general configuration that purges only autocreated
peers that were created when persist mode isn't enabled.
(closes issue ASTERISK-20611)
Reported by: Alisher
Review: https://reviewboard.asterisk.org/r/2171/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since there are a number of legacy devices out there that fail to handle ICE
candidates properly (which is a nice way of saying something much uglier),
disable it by default.
Support for ICE candidates can be enabled in rtp.conf using the icesupport
setting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's DTMF Specifications are based on AT&T specs, which may not be compatible in other countries.
Various countries have different specifications for the maximum power level differences
between the DTMF low group and high group of frequencies.
Power level difference between frequencies for different Administrations/RPOAs
NTT = Max. 5 dB
AT&T = 4dB(reverse) to 8dB(normal)
Danish = Max. 6 dB
Australian = Max. 10 dB
Brazilian = Max. 9 dB
ETSI = Max. 6 dB from ETSI ES 201 235-3 V1.3.1 (2006-03)
Now allow 4 variables to be individually configured in dsp.conf, with reasonable min/max of 2dB to 20dB.
Default is AT&T specifications
Add's the following variables to dsp.conf
;dtmf_normal_twist=6.31
;dtmf_reverse_twist=2.51
;relax_dtmf_normal_twist=6.31
;relax_dtmf_reverse_twist=3.98
(closes issue ASTERISK-20442)
Reported by: tbsky
Tested by: tbsky,alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2141/
........
Merged revisions 374384 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374385 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP session timer mechanism contains a mandatory 'refresher' parameter
(included in the Session-Expires header) which is used in the session timer
offer/answer signaling within a SIP Invite dialog. It looks like asterisk is
interpreting the uac resp. uas role only as the initial role of client and
server (caller is uac, callee is uas). The standard rfc 4028 however assigns
the client role to the ((RE)-Invite) requester, the server role to the
((RE)-Invite) responder.
This patch has Asterisk track the actual refresher as "us" or "them" as opposed
to relying on just the configured "uas" or "uac" properties.
(closes issue AST-922)
Reported by: Thomas Airmont
Review: https://reviewboard.asterisk.org/r/2118/
........
Merged revisions 373652 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373665 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373690 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes the turnport configuration property and changes the
turnaddr property to be a combined host[:port] configuration string. The
patch also modifies the documentation in the example configuration to
reflect the property changes and adds some additional text indicating how
the STUN port is configured.
(closes issue ASTERISK-20344)
Reported by: beagles
Tested by: beagles
Review: https://reviewboard.asterisk.org/r/2111/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sets INUSE when no free agents, NOT_INUSE when an agent is free.
modifes handle_statechange() scan members loop to scan for a free agent
and updates the Queue:queuename_avial devstate.
Previously exited early if the member was found in the queue.
Now Exits later when both a member was found, and a free agent was found.
alecdavis (license 585)
Reported by: Alec Davis
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/2121/
~~~~
Support all ways a member can be available for 'agent available' hints
Alec's patch in r373188 added the ability to subscribe to a hint for when
Queue members are available. This patch modifies the check that determines
when a Queue member is available by refactoring the availability checks in
num_available_members into a shared function is_member_available. This
should now handle the ringinuse option, as well as device state values
other than AST_DEVICE_NOT_INUSE.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for hints on a queue. Hints can be added using
the nomenclature 'Queue:name', where name is the name of the queue being
monitored.
This nifty feature was done by Alec Davis.
Review: https://reviewboard.asterisk.org/r/1619
Reported by: Alec Davis
Tested by: alecdavis
patches:
review1619.diff2 by alecdavis (license 585)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373235 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As mentioned on the review for this, WebRTC has moved towards choosing
DTLS-SRTP as the mechanism for key exchange for SRTP. This commit adds
support for this but makes it available for normal SIP clients as well.
Testing has been done to ensure that this introduces no regressions with
existing behavior and also that it functions as expected.
Review: https://reviewboard.asterisk.org/r/2113/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373229 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to 1.8, it was not necessary for an explicit "type" to be set for an
asterisk LDAP realtime peer. Now the routine find_peer actually checks the
type field during registration and fails to find the peer if it is not set.
The attached patches make the realtime type equal whatever type is being
searched for if the type is 0 upon return from routine build_peer.
(closes issue ASTERISK-17222)
Reported by: John Covert
Patch by: David Vossel
Tested by: Darren Sessions
Review: https://reviewboard.asterisk.org/r/2095/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@372500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds named calledgroups/pickupgroups to Asterisk. Named groups are
implemented in parallel to the existing numbered callgroup/pickupgroup
implementation. However, unlike the existing implementation, which is limited
to a maximum of 64 defined groups, the number of defined groups allowed for
named callgroups/pickupgroups is effectively unlimited.
Named groups are configured with the keywords "namedcallgroup" and
"namedpickupgroup". This corresponds to the numbered group definitions of
"callgroup" and "pickupgroup". Note that as the implementation of named groups
coexists with the existing numbered implementation, a defined named group of
"4" does not equate to numbered group 4.
Support for the named groups has been added to the SIP, DAHDI, and mISDN channel
drivers.
Review: https://reviewboard.asterisk.org/r/2043
Uploaded by:
Guenther Kelleter(license #6372)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a patch from kkm from review board.
This is useful for adding headers to REFER requests that
emanate from a Transfer() dialplan application call.
This also fixes some uses of the Referred-by header, removing
an extra set of angle brackets.
I've modified the reporter's original patch to not require
any additions to the sip_refer header and to just remove the
referred_by_name from sip_refer since it is no longer needed
or used.
(closes Issue ASTERISK-17639)
reported by Kirill Katsnelson
Patches:
019059-sip-refer-addheaders-trunk-353549.diff
uploaded by Kirill Katsnelson (license #5845)
Review: https://reviewboard.asterisk.org/r/1159
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this option set, channel variables can be set on
every manager originate. The Variable header can still
be used to set additional channel variables for individual
calls if desired.
This work was completed by Olle Johansson on review board.
I have applied the review feedback and am committing it in
order to get this into trunk before Asterisk 11 is branched.
Review: https://reviewboard.asterisk.org/r/1412
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370681 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds Named ACL functionality to Asterisk. This allows system
administrators to define an ACL and refer to it by a unique name. Configurable
items can then refer to that name when specifying access control lists.
It also includes updates to all core supported consumers of ACLs. That includes
manager, chan_sip, and chan_iax2. This feature is based on the deluxepine-trunk
by Olle E. Johansson and provides a subset of the Named ACL functionality
implemented in that branch. For more information on this feature, see acl.conf
and/or the Asterisk wiki.
Review: https://reviewboard.asterisk.org/r/1978/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This channel driver is a replacement for both chan_gtalk and chan_jingle but adds additional features not found in either.
These features include full configuration reload, video, full codec support, bidirectional cause code mapping, hold,
unhold, and ringing indication. It is also compliant with the current published Jingle and Google Jingle specifications.
The original Google Talk protocol is also supported for Google Voice interoperability.
You may ask yourself though where the name motif comes from... and I would say to you... music!
motif: a perceivable or salient recurring fragment or succession of notes
Sorta like a jingle!
Review: https://reviewboard.asterisk.org/r/1917/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
options are documented in config sample
sample config rename to proper name - ooh323.conf
To change media address ooh323 send empty TCS if there was
completed TCS exchange or send facility forwardedelements
with new fast start proposal if not.
Then close transmit logical channels and renew TCS exchange.
If new fast start proposal is received then ooh323 stack call back
channel driver routine to change rtp address in the rtp instance.
If empty TCS is received then close transmit logical channels and
renew TCS exchange
Review: https://reviewboard.asterisk.org/r/1607/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
