........
r402345 | kmoore | 2013-11-01 05:31:49 -0700 (Fri, 01 Nov 2013) | 11 lines
chan_sip: Fix RTCP port for SRFLX ICE candidates
This corrects one-way audio between Asterisk and Chrome/jssip as a
result of Asterisk inserting the incorrect RTCP port into RTCP SRFLX
ICE candidates. This also exposes an ICE component enumeration to
extract further details from candidates.
(closes issue ASTERISK-21383)
Reported by: Shaun Clark
Review: https://reviewboard.asterisk.org/r/2967/
........
r405234 | kharwell | 2014-01-09 08:49:55 -0800 (Thu, 09 Jan 2014) | 19 lines
res_rtp_asterisk: Fails to resume WebRTC call from hold
In ast_rtp_ice_start if the ice session create check list failed, start check
was never initiated and ice_started was never set to true. Upon re-entering
the function (for instance, [un]hold) it would try to create the check list
again with duplicate remote candidates.
Fixed so that if the create check list fails the necessary data structures
are properly re-initialized for any subsequent retries.
Note, it was decided to not stop ice support (by calling ast_rtp_ice_stop) on a
check list failure because it possible things might still work. However, a
debug message was added to help with any future troubleshooting.
(closes issue ASTERISK-22911)
Reported by: Vytis Valentinavičius
Patches:
works_on_my_machine.patch uploaded by xytis (license 6558)
........
r409129 | jrose | 2014-02-27 11:19:02 -0800 (Thu, 27 Feb 2014) | 15 lines
res_rtp_asterisk: Fix checklist creating problems in ICE sessions
Prior to this patch, local candidate lists including SRFLX would fail to start
properly when building ICE candidate check lists. This patch fixes that problem
by making sure that each SRFLX candidate is associated with the proper
base address so that the check list can create matches properly.
This patch was written by jcolp. The issue will be left open to await testing
by the issue participants.
(issue ASTERISK-23213)
Reported by: Andrea Suisani
Review: https://reviewboard.asterisk.org/r/3256/
........
r409130 | jrose | 2014-02-27 11:38:10 -0800 (Thu, 27 Feb 2014) | 8 lines
res_rtp_asterisk: correct build error from r409129
Accidentally placed a declaration below functional code
(issue ASTERISK-23213)
Reported by: Andrea Suisani
Review: https://reviewboard.asterisk.org/r/3256/
........
r409565 | jrose | 2014-03-04 08:40:39 -0800 (Tue, 04 Mar 2014) | 9 lines
res_rtp_asterisk: Fix one way audio problems with hold/unhold when using ICE
ICE sessions will now be restarted if sessions are changed to use new sets of
remote candidates.
(closes issue ASTERISK-22911)
Reported by: Vytis Valentinavičius
Review: https://reviewboard.asterisk.org/r/3275/
........
r413008 | mjordan | 2014-04-25 10:47:21 -0700 (Fri, 25 Apr 2014) | 14 lines
res_rtp_asterisk: Add support for DTLS handshake retransmissions
On congested networks, it is possible for the DTLS handshake messages to get
lost. This patch adds a timer to res_rtp_asterisk that will periodically
check to see if the handshake has succeeded. If not, it will retransmit the
DTLS handshake.
Review: https://reviewboard.asterisk.org/r/3337
ASTERISK-23649 #close
Reported by: Nitesh Bansal
patches:
dtls_retransmission.patch uploaded by Nitesh Bansal (License 6418)
........
r417141 | file | 2014-06-23 11:49:14 -0700 (Mon, 23 Jun 2014) | 5 lines
res_rtp_asterisk: Return the length of data written when sending via ICE instead of 0.
ASTERISK-23834 #close
Reported by: Richard Kenner
........
r417677 | file | 2014-06-30 12:42:18 -0700 (Mon, 30 Jun 2014) | 12 lines
res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP.
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip have also been added to allow behavior
to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
........
Merged revisions 402345,405234,409129-409130,409565,413008,417141,417677 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/11.6@417724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Simply establishing a TCP connection and never sending anything to the
configured HTTP port in http.conf will tie up a HTTP connection. Since
there is a maximum number of open HTTP sessions allowed at a time you can
block legitimate connections.
A similar problem exists if a HTTP request is started but never finished.
* Added http.conf session_inactivity timer option to close HTTP
connections that aren't doing anything. Defaults to 30000 ms.
* Removed the undocumented manager.conf block-sockets option. It
interferes with TCP/TLS inactivity timeouts.
* AMI and SIP TLS connections now have better authentication timeout
protection. Though I didn't remove the bizzare TLS timeout polling code
from chan_sip.
* chan_sip can now handle SSL certificate renegotiations in the middle of
a session. It couldn't do that before because the socket was non-blocking
and the SSL calls were not restarted as documented by the OpenSSL
documentation.
* Fixed an off nominal leak of the ssl struct in
handle_tcptls_connection() if the FILE stream failed to open and the SSL
certificate negotiations failed.
The patch creates a custom FILE stream handler to give the created FILE
streams inactivity timeout and timeout after a specific moment in time
capability. This approach eliminates the need for code using the FILE
stream to be redesigned to deal with the timeouts.
This patch indirectly fixes most of ASTERISK-18345 by fixing the usage of
the SSL_read/SSL_write operations.
ASTERISK-23673 #close
Reported by: Richard Mudgett
........
Merged revisions 415841 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415854 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/11.6@415977 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When overlap dialing is enabled, the lack of inband audio available
information in the SETUP_ACKNOWLEDGE events causes an interoperability
problem with SIP. sig_pri doesn't know if there is dialtone present when
a SETUP_ACKNOWLEDGE is received so it assumes it is there and posts an
AST_CONTROL_PROGRESS frame. The SIP channel driver then sends out a 183
Session Progress and blocks the desired 180 Ringing message when the
ALERTING message comes in.
* Made the configure script detect if the installed version of libpri
supports the SETUP_ACKNOWLEDGE enhancements.
* Using the new API, made generate an AST_CONTROL_PROGRESS frame on an
incoming SETUP_ACKNOWLEDGE message when the message indicates inband audio
is present instead of assuming that dialtone is present.
* Using the new API, made SETUP_ACKNOWLEDGE send out an inband audio
available indication only if dialtone is expected. The change also makes
the fallback behaviour of sending the PROGRESS message better by sending
it only if dialtone is expected.
* Changed receiving a PROCEEDING message to not generate an
AST_CONTROL_PROGRESS frame if the progress indication ie indicates
non-end-to-end-ISDN. This helps interoperability with SIP.
* Changed sending a PROCEEDING message in response to an
AST_CONTROL_PROCEEDING frame to not indicate inband audio available. It
was silly to do so anyway because the channel driver doesn't know if
inband audio is even available. This helps interoperability with SIP.
This patch and a corresponding change in libpri work together to allow
Asterisk to control the inband audio available progress indication ie on
the SETUP_ACKNOWLEDGE message when dialtone is present.
AST-1338 #close
Reported by: Tyler Stewart
Review: https://reviewboard.asterisk.org/r/3521/
........
Merged revisions 413714 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 413765 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/11.6@413773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Establishing an IAX2 call between Asterisk v1.4 and v1.8 (or later)
results in an unexpected call disconnect. The problem happens because
newer values in the enum ast_control_frame_type are not consistent between
the branch versions of Asterisk.
For example:
1) v1.4 calls v1.8 (or later) using IAX2
2) v1.8 answers and sends a connected line update control frame. (on v1.8
AST_CONTROL_CONNECTED_LINE = 22)
3) v1.4 receives the control frame as an end-of-q (on v1.4
AST_CONTROL_END_OF_Q = 22)
4) v1.4 disconnects the call once the receive queue becomes empty.
Several things are done by this patch to fix the problem and attempt to
prevent it from happening again in the future:
* Added a warning at the definition of enum ast_control_frame_type about
how to add new control frame values.
* Made block sending and receiving control frames that have no reason to
go over the wire.
* Extended the connectedline iax.conf parameter to also include the
redirecting information updates.
* Updated the connectedline iax.conf parameter documentation to include a
notice that the parameter must be "no" when the peer is an Asterisk v1.4
instance.
(closes issue AST-1302)
Review: https://reviewboard.asterisk.org/r/3174/
........
Merged revisions 407678 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 407727 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/11.6@407746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
........
Merged revisions 405431 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/11.6@405488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows individual dialplan functions to be marked as
'dangerous', to inhibit their execution from external sources.
A 'dangerous' function is one which results in a privilege escalation.
For example, if one were to read the channel variable SHELL(rm -rf /)
Bad Things(TM) could happen; even if the external source has only read
permissions.
Execution from external sources may be enabled by setting
'live_dangerously' to 'yes' in the [options] section of asterisk.conf.
Although doing so is not recommended.
(closes issue ASTERISK-22905)
Review: http://reviewboard.digium.internal/r/432/
........
Merged revisions 403913 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 403917 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/11.6@403956 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r396884 | jbigelow | 2013-08-16 17:45:10 -0500 (Fri, 16 Aug 2013) | 8 lines
Add test suite events to indicate when a feature is detected or not
These are needed by the bridge test suite tests for them to be able to run
against Asterisk 11.
Review: https://reviewboard.asterisk.org/r/2751/
........
r400075 | mjordan | 2013-09-28 16:59:12 -0500 (Sat, 28 Sep 2013) | 16 lines
Add check for openSUSE when detecting bfd library
In ASTERISK-17842, some additional library checks were added to the configure
script so that the bfd library could be found on CentOS and Fedora systems.
As it turns out, openSUSE requires an additional library. This patch adds
another check to the configure script for openSUSE that will add that library.
Review: https://reviewboard.asterisk.org/r/2885/
(closes issue AST-1169)
Reported by: Guenther Kelleter
........
Merged revisions 400073 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r400093 | mjordan | 2013-09-28 17:21:37 -0500 (Sat, 28 Sep 2013) | 23 lines
res_rtp_asterisk: Correct erroneous lost packet information in RTCP reports
RTCP's calculation of the number of lost packets in an RTP stream is based on
that stream's sequence number count, the number of received packets, and how
many packets we expect to receive. When the SSRC for an RTP stream changes,
there can - and almost always will be - a large jump in the next packet's
timestamp and sequence number. If we don't reset the number of received
packets, sequence number count, and other metrics used by RTCP, the next RR/SR
report will use the previous SSRC's values to calculate the lost packet count
for the new SSRC - resulting in a very large number of lost packets.
This patch modifies res_rtp_asterisk such that, if it detects a SSRC change, it
will reset the various values used by the RTCP calculations. From the
perspective of RTCP, this appears as a new media stream - which is what it is.
Review: https://reviewboard.asterisk.org/r/2886/
(closes issue AST-1174)
Reported by: Thomas Arimont
........
Merged revisions 400089 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r401446 | mjordan | 2013-10-22 17:42:24 -0500 (Tue, 22 Oct 2013) | 15 lines
res_rtp_asterisk: Fix crash when RTCP is not available during SSRC change
In r400089, a patch was put in to correct erroneous RTCP statistic resets.
Unfortunately, ast_rtp_read can be called on an RTP instance that does not
have RTCP information. This patch prevents that crash by only resetting
the statistics if we do actually have an RTCP instance.
(issue AST-1174)
(closes issue ASTERISK-22667)
Reported by: John Bigelow
........
Merged revisions 401445 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r401960 | sgriepentrog | 2013-10-25 15:44:40 -0500 (Fri, 25 Oct 2013) | 15 lines
pbx.c: fix confused match caller id that deleted exten still in hash
This fixes a bug where a zero length callerid match adjacent to a no
match callerid extension entry would be deleted together, which then
resulted in hashtable references to free'd memory. A third state of
the matchcid value has been added to indicate match to any extension
which allows enforcing comparison of matchcid on/off without errors.
(closes issue AST-1235)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/2930/
........
Merged revisions 401959 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 396884,400075,400093,401446,401960 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/certified/branches/11.6@402382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes some long-standing bugs in debug threads that were
exacerbated with recent Optional API work in Asterisk 12.
With debug threads enabled, on some systems, there's a lock ordering
problem between our mutex and glibc's mutex protecting its module list
(Ubuntu Lucid, glibc 2.11.1 in this instance). In one thread, the module
list will be locked before acquiring our mutex. In another thread, our
mutex will be locked before locking the module list (which happens in
the depths of calling backtrace()).
This patch fixes this issue by moving backtrace() calls outside of
critical sections that have the mutex acquired. The bigger change was to
reentrancy tracking for ast_cond_{timed,}wait, which wrongly assumed
that waiting on the mutex was equivalent to a single unlock (it actually
suspends all recursive locks on the mutex).
(closes issue ASTERISK-22455)
Review: https://reviewboard.asterisk.org/r/2824/
........
Merged revisions 398648 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398649 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Review https://reviewboard.asterisk.org/r/2580/ tried to fix the mismatch
in memory pools but had a math error determining the buffer size and
didn't address other similar memory pool mismatches.
* Effectively reverted the previous patch to go in the same direction as
trunk for the returned memory pool of ast_bt_get_symbols().
* Fixed memory leak in ast_bt_get_symbols() when BETTER_BACKTRACES is
defined.
* Fixed some formatting in ast_bt_get_symbols().
* Fixed sig_pri.c freeing memory allocated by libpri when MALLOC_DEBUG is
enabled.
* Fixed __dump_backtrace() freeing memory from ast_bt_get_symbols() when
MALLOC_DEBUG is enabled.
* Moved __dump_backtrace() because of compile issues with the utils
directory.
(closes issue ASTERISK-22221)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2778/
........
Merged revisions 397525 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@397528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If an endpoint fails to include the T38MaxBitRate attribute during negotiation,
Asterisk will negotiate a bit rate of 2400 instead of the ITU recommended
bit rate of 14400. This patch fixes this by making AST_T38_RATE_14400 the
'default' value of the enum by assigning it a value of 0, such that if an
endpoint fails to include the attribute, the default will be 14400.
Note that Walter Doekes included the nice comment in frame.h about why we are
purposefully assigning AST_T38_RATE_14400 a value of 0.
(closes issue ASTERISK-22275)
Reported by: Andreas Steinmetz
patches:
fax-fix.patch uploaded by anstein (License 6523)
........
Merged revisions 397256 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@397257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The debug versions of ao2_ref() should only be used if REF_DEBUG is
enabled so nothing is written to /tmp/refs unexpectedly.
(closes issue ASTERISK-21785)
Reported by: abelbeck
Patches:
jira_asterisk_21785_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: abelbeck
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@388700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
pjproject is what actually requires libuuid.
(closes issue ASTERISK-21125)
reported by Private Name
(Ed. note: Really? Private Name? I am rolling my eyes so hard right now.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@385356 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While autoservice is running and servicing a channel the callid is being stored
and removed in the thread's local storage for each iteration of the thread loop.
If debug was set to a sufficient level the log file would be spammed with callid
thread local storage debug messages.
Added a new function that checks to see if the callid to be stored is different
than what is already contained (if anything). If it is different then
store/replace and log, otherwise just leave as is. Also made it so all logging
of debug messages pertaining to the callid thread storage outputs only when
TEST_FRAMEWORK is defined.
(issue ASTERISK-21014)
(closes issue ASTERISK-21014)
Report by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2324/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@381554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Building Asterisk on Raspbian with hard-float support fails as it uses the
string 'linux-gnueabihf' for host os, as opposed to 'linux-gnueabi'. This patch
modifies the configure script for Asterisk such that it will match on any
string beginning with 'linux-gnueabi', as opposed to requiring an explicit
match.
(closes issue ASTERISK-21006)
Reported by: Christian Hesse
Tested by: Christian Hesse
patches:
linux-gnueabihf.patch uploaded by Christian Hesse (license 6459)
linux-gnueabihf-autoconf.patch uploaded by Christian Hesse (license 6459)
........
Merged revisions 380520 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@380521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
XML encoding in chan_sip is accomplished by naively building the XML
directly from strings. While this usually works, it fails to take into
account escaping the reserved characters in XML.
This patch adds an 'ast_xml_escape' function, which works similarly to
'ast_uri_encode'. This is used to properly escape the local_display
attribute in XML formatted NOTIFY messages.
Several things to note:
* The Right Thing(TM) to do would probably be to replace the
ast_build_string stuff with building an ast_xml_doc. That's a much
bigger change, and out of scope for the original ticket, so I
refrained myself.
* It is with great sadness that I wrote my own ast_xml_escape
function. There's one in libxml2, but it's knee-deep in
libxml2-ness, and not easily used to one-off escape a
string.
* I only escaped the string we know is causing problems
(local_display). At least some of the other strings are
URI-encoded, which should be XML safe. Rather than figuring out
what's safe and escaping what's not, it would be much cleaner to
simply build an ast_xml_doc for the messages and let the XML
library do the XML escaping. Like I said, that's out of scope.
(closes issue ABE-2902)
Reported by: Guenther Kelleter
Tested by: Guenther Kelleter
Review: http://reviewboard.digium.internal/r/365/
........
Merged revision 378919 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 378933 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@378934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The prior location is before the declaration of struct ast_str, which causes
compiler warnings.
(closes issue ASTERISK-20852)
Reported by: Pavel Troller
Patches:
strings.diff uploaded by Pavel Troller (license 6302)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@378747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The AMI redirect action can fail to redirect two channels that are bridged
together. There is a race between the AMI thread redirecting the two
channels and the bridge thread noticing that a channel is hungup from the
redirects.
* Made the bridge wait for both channels to be redirected before exiting.
* Made the AMI redirect check that all required headers are present before
proceeding with the redirection.
* Made the AMI redirect require that any supplied ExtraChannel exist
before proceeding. Previously the code fell back to a single channel
redirect operation.
(closes issue ASTERISK-18975)
Reported by: Ben Klang
(closes issue ASTERISK-19948)
Reported by: Brent Dalgleish
Patches:
jira_asterisk_19948_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett, Thomas Sevestre, Deepak Lohani, Kayode
Review: https://reviewboard.asterisk.org/r/2243/
........
Merged revisions 378356 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@378358 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk maintains an internal cache for devices in the event subsystem. The
device state cache holds the state of each device known to Asterisk, such that
consumers of device state information can query for the last known state for
a particular device, even if it is not part of an active call. The concept of
a device in Asterisk can include entities that do not have a physical
representation. One way that this occurred was when anonymous calls are allowed
in Asterisk. A device was automatically created and stored in the cache for
each anonymous call that occurred; this was possible in the SIP and IAX2
channel drivers and through channel drivers that utilized the
res_jabber/res_xmpp resource modules (Gtalk, Jingle, and Motif). These devices
are never removed from the system, allowing anonymous calls to potentially
exhaust a system's resources.
This patch changes the event cache subsystem and device state management to
no longer cache devices that are not associated with a physical entity.
(issue ASTERISK-20175)
Reported by: Russell Bryant, Leif Madsen, Joshua Colp
Tested by: kmoore
patches:
event-cachability-3.diff uploaded by jcolp (license 5000)
........
Merged revisions 378303 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378320 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@378321 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When two users entered a new conference simultaneously, one of the callers
hears MOH. This happened if two unmarked users entered simultaneously and
also if a waitmarked and a marked user entered simultaneously.
* Created a confbridge internal MOH API to eliminate the inlined MOH
handling code. Note that the conference mixing bridge needs to be locked
when actually starting/stopping MOH because there is a small window
between the conference join unsuspend MOH and actually joining the mixing
bridge.
* Created the concept of suspended MOH so it can be interrupted while
conference join announcements to the user and DTMF features can operate.
* Suspend any MOH until the user is about to actually join the mixing
bridge of the conference. This way any pre-join file playback does not
need to worry about MOH.
* Made post-join actions only play deferred entry announcement files.
Changing the user/conference state during that time is not protected or
controlled by the state machine.
(closes issue ASTERISK-20606)
Reported by: Eugenia Belova
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2232/
........
Merged revisions 377992 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@377993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Similar to the patch that moved the fork earlier in the startup sequence to
prevent mutex errors in the recursive mutex surrounding the read/write thread
registration lock, this patch re-initializes the logmsgs mutex. Part of the
start up sequence before forking the process into the background includes
reading asterisk.conf; this has to occur prior to the call to daemon in order
to read startup parameters. When reading in a conf file, log statements can
be generated. Since this can't be avoided, the mutex instead is
re-initialized to ensure a reset of any thread tracking information.
This patch also includes some additional debugging to catch errors when
locking or unlocking the recursive mutex that surrounds locks when the
DEBUG_THREADS build option is enabled. DO_CRASH or THREAD_CRASH will
cause an abort() if a mutex error is detected.
(issue ASTERISK-19463)
Reported by: mjordan
Tesetd by: mjordan
........
Merged revisions 376586 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376587 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Both hashtest and hashtest2 are manual testing apps that thrash hash
tables (hashtab and ao2 containers, respectively), by spinning up
several threads that randomly insert, delete, lookup and iterate over
the hash table. If the app doesn't crash, the hash table probably passes
the test. Those utils are not a part of the typical Asterisk build, so
they do not usually get compiled. This all makes them less that useful.
This patch removes those manual test programs and replaces them with
Asterisk unit test modules (test_{hashtab,astobj2}_thrash.so). It also
attempts to make the tests more deterministic.
* Rather than spinning up some number of threads that operate on the
hash table randomly, spin up four threads that concurrenly add,
remove, lookup and iterate over the hash table.
* Each thread checks the state of the hash table both during and after
execution, and indicates a test failure if things are not as expected.
* Each thread times out after 60 seconds to prevent deadlocking the unit
test run.
(closes issue ASTERISK-20505)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2189/
........
Merged revisions 376306 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376315 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376339 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Makes malloc() behave like calloc(). It will return a memory block
filled with 0x55. A nonzero value.
* Makes free() fill the released memory block and boundary fence's with
0xdeaddead. Any pointer use after free is going to have a pointer
pointing to 0xdeaddead. The 0xdeaddead pointer is usually an invalid
memory address so a crash is expected.
* Puts the freed memory block into a circular array so it is not reused
immediately.
* When the circular array rotates out a memory block to the heap it checks
that the memory has not been altered from 0xdeaddead.
* Made the astmm_log message wording better.
* Made crash if the DO_CRASH menuselect option is enabled and something is
found.
* Fixed a potential alignment issue on 64 bit systems.
struct ast_region.data[] should now be aligned correctly for all
platforms.
* Extracted region_check_fences() from __ast_free_region() and
handle_memory_show().
* Updated handle_memory_show() CLI usage help.
Review: https://reviewboard.asterisk.org/r/2182/
........
Merged revisions 376029 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376030 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r375993 | mmichelson | 2012-11-07 11:01:13 -0600 (Wed, 07 Nov 2012) | 30 lines
Fix misuses of timeouts throughout the code.
Prior to this change, a common method for determining if a timeout
was reached was to call a function such as ast_waitfor_n() and inspect
the out parameter that told how many milliseconds were left, then use
that as the input to ast_waitfor_n() on the next go-around.
The problem with this is that in some cases, submillisecond timeouts
can occur, resulting in the out parameter not decreasing any. When this
happens thousands of times, the result is that the timeout takes much
longer than intended to be reached. As an example, I had a situation where
a 3 second timeout took multiple days to finally end since most wakeups
from ast_waitfor_n() were under a millisecond.
This patch seeks to fix this pattern throughout the code. Now we log the
time when an operation began and find the difference in wall clock time
between now and when the event started. This means that sub-millisecond timeouts
now cannot play havoc when trying to determine if something has timed out.
Part of this fix also includes changing the function ast_waitfor() so that it
is possible for it to return less than zero when a negative timeout is given
to it. This makes it actually possible to detect errors in ast_waitfor() when
there is no timeout.
(closes issue ASTERISK-20414)
reported by David M. Lee
Review: https://reviewboard.asterisk.org/r/2135/
........
r375994 | mmichelson | 2012-11-07 11:08:44 -0600 (Wed, 07 Nov 2012) | 3 lines
Remove some debugging that accidentally made it in the last commit.
........
Merged revisions 375993-375994 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375995 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376014 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a bridge is broken by an AMI Redirect action or the ChannelRedirect
application, an in progress DTMF digit could be stuck sending forever.
* Made simulate a DTMF end event when a bridge is broken and a DTMF digit
was in progress.
(closes issue ASTERISK-20492)
Reported by: Jeremiah Gowdy
Patches:
bridge_end_dtmf-v3.patch.txt (license #6358) patch uploaded by Jeremiah Gowdy
Modified to jira_asterisk_20492_v1.8.patch
jira_asterisk_20492_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2169/
........
Merged revisions 375964 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375965 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375966 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, if an acknowledgement of a timer fails Asterisk will not realize
that a serious error occurred and will continue attempting to use the timer's
file descriptor. This can lead to situations where errors stream to the
CLI/log file. This consumes significant resources, masks the actual problem
that occurred (whatever caused the timer to fail in the first place), and
can leave channels in odd states.
This patch propagates the errors in the timing resource modules up through
the timer core, and makes users of these timers handle acknowledgement
failures. It also adds some defensive coding around the use of timers
to prevent using bad file descriptors in off nominal code paths.
Note that the patch created by the issue reporter was modified slightly for
this commit and backported to 1.8, as it was originally written for
Asterisk 10.
Review: https://reviewboard.asterisk.org/r/2178/
(issue ASTERISK-20032)
Reported by: Jeremiah Gowdy
patches:
jgowdy-timerfd-6-22-2012.diff uploaded by Jeremiah Gowdy (license 6358)
........
Merged revisions 375893 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375894 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375895 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Make git more attractive for managing work-in-progress. Especially
convenient when a potential patch set needs to be tested on multiple
platforms since one can use git to keep all the test environments in sync
independent of a subversion server.
Now the Asterisk version will show the exact git SHA5 that was used when
building (still appended by "M" if there are local modifications) from a
git clone of the Asterisk repository so the developer can more easily know
what is actually under test.
You will now get this:
$ asterisk -V
Asterisk GIT-1698298
Instead of this:
$ asterisk -V
Asterisk UNKNOWN__and_probably_unsupported
This has zero impact for those not using git with the exception of an
extra test in the configure script to gather git's path. This is
necessary to prevent "sudo make install" from failing since git may not be
in the path in make's shell environment.
(closes issue ASTERISK-20483)
Reported by: Shaun Ruffell
Patches:
0001-build_tools-Allow-Asterisk-to-report-git-SHAs-in-ver.patch (license #5417) patch uploaded by Shaun Ruffell
Modified
........
Merged revisions 375189 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375190 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Passing an ast_str pointer by value that then calls
ast_str_set(), ast_str_set_va(), ast_str_append(), or
ast_str_append_va() can result in the pointer originally
passed by value being invalidated if the ast_str had
to be reallocated.
This fixes places in the code that do this. Only the
example in ccss.c could result in pointer invalidation
though since the other cases use a stack-allocated ast_str
and cannot be reallocated.
I've also updated the doxygen in strings.h to include
notes about potential misuse of the functions mentioned
previously.
Review: https://reviewboard.asterisk.org/r/2161
........
Merged revisions 375025 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375026 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@375027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is used to solve an issue where a poll on a file
descriptor does not necessarily correspond to the readiness
of a FILE handle to be read.
This change makes it so that for TCP connections, we do a
recv() on the file descriptor instead.
Because TCP does not guarantee that an entire message or even
just one single message will arrive during a read, a loop has
been introduced to ensure that we only attempt to handle a
single message at a time. The tcptls_session_instance structure
has also had an overflow buffer added to it so that if more
than one TCP message arrives in one go, there is a place to
throw the excess.
Huge thanks goes out to Walter Doekes for doing extensive review
on this change and finding edge cases where code could fail.
(closes issue ASTERISK-20212)
reported by Phil Ciccone
Review: https://reviewboard.asterisk.org/r/2123
........
Merged revisions 374905 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374906 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that having chan_sip
export global symbols was problematic.
The biggest problem was that load order was affected.
Trying to use realtime could be problematic since in
all likelihood the necessary realtime driver(s) would
not be loaded before chan_sip.
In addition, it was found that it was impossible to
use the Digium Phone Module for Asterisk since it
must be loaded before chan_sip since it must hook
into chan_sip's configuration parsing.
The solution is to use a virtual table in the same
manner that other modules in Asterisk do, like
app_voicemail.
(closes issue ASTERISK-20545)
Reported by: kmoore
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Greenlight in #asterisk brought up that he was receiving an error message "Could
not create persistent member string, out of space" when running app_queue in
Asterisk 10. dump_queue_members() made an assumption that 8K would be enough to
store the generated string, but with queues that have large member lists this is
not always the case. This patch removes the limitation and uses ast_str instead
of a fixed sized buffer.
The complicating factor comes from the fact that ast_db_get requires a buffer
and buffer size argument, which doesn't let us pull back more than what we pass
in, so I introduced a new ast_db_get_allocated() which returns an ast_strdup()'d
copy of the value from astdb.
As an aside, I did some testing on the maximum size of data that we can store in
the BDB library we distribute and was able to store a 10MB string and retrieve
it with no problems, so I feel this is a safe patch.
Review: https://reviewboard.asterisk.org/r/2136/
........
Merged revisions 374108 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374135 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374150 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As mentioned on the review for this, WebRTC has moved towards choosing
DTLS-SRTP as the mechanism for key exchange for SRTP. This commit adds
support for this but makes it available for normal SIP clients as well.
Testing has been done to ensure that this introduces no regressions with
existing behavior and also that it functions as expected.
Review: https://reviewboard.asterisk.org/r/2113/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373229 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* ASTERISK-20383
Missing named call pickup group features:
CHANNEL(callgroup) - Need CHANNEL(namedcallgroup)
CHANNEL(pickupgroup) - Need CHANNEL(namedpickupgroup)
Pickup() - Needs to also select from named pickup groups.
* ASTERISK-20384
Using the pickupexten, the pickup channel selection could fail even though
there was a call it could have picked up. In a call pickup race when
there are multiple calls to pickup and two extensions try to pickup a
call, it is conceivable that the loser will not pick up any call even
though it could have picked up the next oldest matching call.
Regression because of the named call pickup group feature.
* See ASTERISK-20386 for the implementation improvements. These are the
changes in channel.c and channel.h.
* Fixed some locking issues in CHANNEL().
(closes issue ASTERISK-20383)
Reported by: rmudgett
(closes issue ASTERISK-20384)
Reported by: rmudgett
(closes issue ASTERISK-20386)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2112/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373220 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to use nested functions on some versions of GCC (e.g. GCC on OS X),
the -fnested-functions flag must be passed to the compiler. This patch adds
detection logic to ./configure to add the flag if necessary. It also adds
a comment to utils.h as to why the nested function needs a prototype.
(closes issue ASTERISK-20399)
Reported by: David M. Lee
Review: https://reviewboard.asterisk.org/r/2102/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373119 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_waitfordigit_full would simply pass its timeout to ast_waitfor_nandfds,
expecting it to decrement the timeout by however many milliseconds were
waited. This is a problem if it consistently waits less than 1ms. The timeout
will never be decremented, and we wait... FOREVER!
This patch makes ast_waitfordigit_full manage the timeout itself. It maintains
the previously undocumented behavior that negative timeouts wait forever.
(closes issue ASTERISK-20375)
Reported by: Mark Michelson
Tested by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/2109/
........
Merged revisions 373024 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373025 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
message.c makes use of a special message queue channel that exists
in thread storage. This channel never goes away due to the fact that
the taskprocessor used by message.c does not get shut down, meaning
that it never ends the thread that stores the channel.
This patch fixes the problem by shutting down the taskprocessor when
Asterisk is shut down. In addition, the thread storage has a destructor
that will release the channel reference when the taskprocessor is destroyed.
(closes issue AST-937)
Reported by Jason Parker
Patches:
AST-937.patch uploaded by Mark Michelson (License #5049)
Tested by Jason Parker
........
Merged revisions 372885 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@372888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_gtalk, chan_jingle, and res_jabber are now deprecated in favor of
using chan_motif and res_xmpp. They are a feature-equivalent
replacement and are written to be more easily maintainable.
(closes issue ASTERISK-20298)
Review: https://reviewboard.asterisk.org/r/2082/
Reported-by: Leif Madsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@372795 65c4cc65-6c06-0410-ace0-fbb531ad65f3
