If the review to be tested is in a project with restricted access,
we need to use the jenkins user's gerrit https credentials when we
do the checkout or the checkout will fail.
Change-Id: I9dc9994763c5ebfeb9f1cff60fb53f6902b7fd5f
sip_options_get_endpoint_state_compositor_state leaked a reference to
the first available endpoint state compositor that was found.
Change-Id: Idb6be19f7219b6eed1dfb19c1e740dd40cb3fdc7
This change adds the "party" parameter to the Remote-Party-ID header
which indicates which party the header information is applicable
to. In Asterisk this is determined on whether we are the calling
or called party. This is added to improve interoperability with some
implementations.
ASTERISK-28006
Change-Id: I1eec3e377ffff8633b5c1dd59a05e9533122cfca
When a call leaves a queue on leaveempty condition, QUEUESTATUS
must be set to LEAVEEMPTY, no matter whether Queue was executed with or
without the "c" (continue) option.
The regression was introduced in the fix for ASTERISK_25665.
The following fix (ASTERISK_27065) was incomplete, as QUEUESTATUS was
overwritten in case when "c" is set, regardless of what was the cause
for leaving the queue.
ASTERISK-27973 #close
Reported-by: Valentin Safonov
Change-Id: Iec013fe6a26a4e825ca572a1dda4f3cee5f6f80c
It is valid for a config file to be empty or contain only comments, but
not valid for a config value to be set when no uncommented context
exists. This caused an error to be loged numerous times during start
when loading the default pjsip.conf.
Change-Id: Icf3b0d69b4ecb6e935eecd43c99ed8b32a5a1cf6
If in the initial sdp the caller doesn't include the line
a=rtcp-mux
Then asterisk shoud not include rtcp-mux in the response regardless
of rtcp-mux being enabled on the endpoint
ASTERISK-28007 #close
Change-Id: I58e9b9f40a139afc0da5de41906cc608fb62adc7
Enable coverage with `./tests/CI/buildAsterisk.sh --coverage`. This
will cause Asterisk to be compiled with coverage support. It also
initializes 'before' coverage data for all sources. Accept
--tested-only to disable modules which are not run by any test.
Enabling coverage also sets tested-only true by default. To build
everything with coverage enabled use `--coverage --tested-only=0`.
./tests/CI/processCoverage.sh is used to process the coverage and
generate HTML reports.
Fix utils/check_expr2 which failed to compiled with coverage enabled.
Add status output 5 times per stage of astobj2_test_perf to ensure
remote CLI does not timeout when compiled with coverage. Remote CLI
disconnects if no output is received for 60 seconds. When coverage is
enabled it takes about 70 seconds for my laptop to run the stages of
this test, so with the change a message is printed every 14 seconds.
Change-Id: I890f7d5665087426ad7d3e363187691b9afc2222
When the stasis cache is used a hash is calculated for
retrieving or inserting messages. This change calculates
a hash when the message type is initialized that is then
used each time needed. This ensures that the hash is
calculated only once for the message type.
Change-Id: I4fe6bfdafb55bf5c322dd313fbd8c32cce73ef37
The authors of PJProject undef s_addr because of some issue in Microsoft
Windows. However in Oracle Solaris, s_addr is not a structure member, but
defined to map to the real structure member.
Updates the patch from ASTERISK_20366
ASTERISK-27997
Change-Id: I8223026d4d54e2a46521085fcc94bfa6ebe35b11
* Don't include pjlib.h twice in res_pjsip.h
* Consistently use #include <> form for pjproject includes.
(pjsip.h and pjlib.h)
Change-Id: I3f7b42044840de64edf7e9d7695cb60c45990dc7
The script configure from Teluu expects shared libraries (.so) in a subfolder
called 'lib', when --with-xyz=PATH is specified. However for OpenSSL, the
default location is the root of the source folder = PATH. Furthermore, Asterisk
supports both, 'lib' and root. For consistency and because Asterisk is using
(only) OpenSSL in PJProject, it is enhanced to support both locations, just
like Asterisk.
ASTERISK-27995
Change-Id: I8eb916a88b6b8c22e29bb40bee8faaca6c73406f
This change removes a sorcery lookup for retrieving all
contacts at the end of the registration process by keeping
track of the contacts that are added/updated/deleted.
This ensures at the end of the process the container of
contacts we have is the current state.
Pool usage has also been reduced by allocating one for
usage throughout the handling of a REGISTER and resetting
it to a clean state. This ensures that in most cases
we allocate once and just reuse it.
ASTERISK-28001
Change-Id: I1a78b2d46f9a2045dbbff1a3fd6dba84b612b3cb
If asterisk offer an endpoint with SRTP and that endpoint respond
with non srtp, in that case channel(rtp,secure,audio) reply wrong
status.
Why delete flag AST_SRTP_CRYPTO_OFFER_OK while check identical remote_key:
Currently this flag has being set redundantly. In either case identical
or different remote_key this flag has being set. So if we
don't set it while we receive identical remote_key or non SRTP SDP
response then we can take decision of srtp use by using that flag.
ASTERISK-27999
Change-Id: I29dc2843cf4e5ae2604301cb4ff258f1822dc2d7
The tdata containing the response can be shared by both the dialog
object and the tsx object. In order to prevent the race condition
between the tsx retransmission and the dialog sending a response,
clone the tdata before modifying it for the dialog send response.
ASTERISK-27966 #close
Change-Id: Ic381004a3a212fe1d8eca0e707fe09dba4a6ab4e
The check for the library ncurses should use not use the header <curses.h> but
<ncurses.h>, because on some platforms <curses.h> is not a drop-in replacement
for <ncurses.h>: For example in Solaris, the symbol initscr is a typedef in
<curses.h> to a symbol which does not exist in the library ncurses (initscr32).
Simply use <ncurses.h> when you link to ncurses.
Furthermore in Solaris, the header <ncurses.h> is in a subdirectory
/usr/include/ncurses and not available via pkg-config.
ASTERISK-15331
ASTERISK-14935
ASTERISK-12382
ASTERISK-9107
Change-Id: Ife367776b0ccf17d3fefed868245376bfb93745d
In Solaris, the header <jansson.h> is in /usr/include/jansson. To find
Jansson even in such a subdirectory, the tool pkg-config is queried via
AST_PKG_CONFIG_CHECK. For those platforms, which do not list Jansson via
pkg-config, the previous check remains and is executed thereafter.
Because the check for the NetBSD Editline library uses the tool pkg-config
conditionally PKG_PROG_PKG_CONFIG must be used. Because that check happens
earlier than Jansson, it must be placed in front of that.
The script configure does some pre-checks for the script configure of the
Asterisk internal NetBSD Editline library. The check for the library ncurses
should use not use the header <curses.h> but <ncurses.h>, because on some
platforms <curses.h> is not a drop-in replacement for <ncurses.h>: For example
in Solaris, the symbol initscr is a typedef in <curses.h> to a symbol which
does not exist in the library ncurses (initscr32). Simply use <ncurses.h> when
you link to ncurses.
ASTERISK-27991
Change-Id: I69ea0f379f87a50049654b2487c76ee1c04fa53a
This patch adds regular expression support to make the identify section's
match_header option more useful when attempting to match complex headers
like the 'To' or 'From' headers. The 'From' header has variable
components such as the tag parameter that you cannot predict. To specify
a regular expression put slashes around the regular expression in place of
the header value.
[identify-alice]
type=identify
endpoint=alice
match_header=From: /<sip:alice@127\\.0\\.0\\.1>/
* Added regex support to match_header so you could match a 'To' header
among other complex headers.
Fixed reported crashes when trying to match special headers like 'Contact'.
The identify section's match_header method used code that assumed you were
matching a generic header. Any other type of header could cause a crash
if the header structure variant did not match the generic header enough.
* Made use code that will work for any header type instead of code
specific to generic headers.
Other fixes while in the area:
* Made check all headers of the requested name.
* Added some more sanity checks to the configured identify matching
options when applying the configuration.
ASTERISK-27548
Change-Id: I27dfd4ff5e2259b906640e3c330681b76b4ed1f1
The alembic for the PJSIP subscription persistence table has the
"prune_on_boot" field as a boolean. While in Asterisk we are
tolerant of many different definitions of true and false in the
database we only accept "yes" and "no". This change makes the
field treated as a yes/no instead of an integer, thus storing
"yes" and "no" instead of "1" and "0".
Change-Id: Ic8b9211b36babefe78f70def6828a135a6ae7ab6
OpenSSL is an optional external library and should stay optional even when
Developer Mode is configured.
ASTERISK-27990
Change-Id: Ia68a4cd5474b26d45e0f43b04032ad598022853b
This target requires specifying CONFIG_SRC=path_to_configs. This can be
used to install custom configs for the Asterisk build while still
performing directory replacements on asterisk.conf.
Modify internal INSTALL_CONFIGS so first argument requires full path to
the config sources relative to Asterisk source root.
Change-Id: Idcd841df3c8d5bfe23d566bb9e2e448e9df4f8ab
When converting from a json object to an ast variables list the conversion
algorithm was doing a complete traversal of the entire variables list for
every item appended from the json structure.
This patch makes it so the list is no longer traversed for each new ast
variable being appended.
Change-Id: I8bf496a1fc449485150d6db36bfc0354934a3977
When publishing a device state the change can be marked as being
cachable or not. If it is not cached the change is just published
to all interested and not stored away for later query. This was not
fully taken into account when publishing in stasis. The act of
publishing would create a topic for the device even if it may be
ephemeral.
This change makes it so messages which are not cached won't create
a topic for the device. If a topic does already exist it will be
published to but otherwise the change will only be published to
the device state all topic.
ASTERISK-27591
Change-Id: I18da0e8cbb18e79602e731020c46ba4101e59f0a
