With this patch, chan_pjsip/res_pjsip now sets the native formats to the
codecs negotiated by a call.
* The changes in chan_pjsip.c and res_pjsip_sdp_rtp.c set the native
formats to include all the negotiated audio codecs instead of only the
initial preferred audio codec and later the currently received audio
codec.
* The audio frame handling in channel.c:ast_read() is more streamlined and
will automatically adjust to changes in received frame formats. The new
policy is to remove translation and pass the new frame format to the
receiver except if the translation was to a signed linear format. A more
long winded version is commented in ast_read() along with some caveats.
* The audio frame handling in channel.c:ast_write() is more streamlined
and will automatically adjust any needed translation to changes in the
frame formats sent. Frame formats sent can change for many reasons such
as a recording is being played back or the bridged peer changed the format
it sends. Since it is a normal expectation that sent formats can change,
the codec mismatch warning message is demoted to a debug message.
* Removed the short circuit check in
channel.c:ast_channel_make_compatible_helper(). Two party bridges need to
make channels compatible with each other. However, transfers and moving
channels among bridges can result in otherwise compatible channels having
sub-optimal translation paths if the make compatible check is short
circuited. A result of forcing the reevaluation of channel compatibility
is that the asterisk.conf:transcode_via_slin and codecs.conf:genericplc
options take effect consistently now. It is unfortunate that these two
options are enabled by default and negate some of the benefits to the
changes in channel.c:ast_read() by forcing translation through signed
linear on a two party bridge.
* Improved the softmix bridge technology to better control the translation
of frames to the bridge. All of the incoming translation is now normally
handled by ast_read() instead of splitting any translation steps between
ast_read() and the slin factory. If any frame comes in with an unexpected
format then the translation path in ast_read() is updated for the next
frame and the slin factory handles the current frame translation.
This is the final patch in a series of patches aimed at improving
translation path choices. The other patches are on the following reviews:
https://reviewboard.asterisk.org/r/4600/https://reviewboard.asterisk.org/r/4605/
ASTERISK-24841 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4609/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for automatically detecting the type of DTMF that a
PJSIP endpoint supports. When the 'dtmf_mode' endpoint option is set to 'auto',
the channel created for an endpoint will attempt to determine if RFC 4733
DTMF is supported. If so, it will use that DTMF type. If not, the DTMF type
for the channel will be set to inband.
Review: https://reviewboard.asterisk.org/r/4438
ASTERISK-24706 #close
Reported by: yaron nahum
patches:
yaron_patch_3_Feb.diff submitted by yaron nahum (License 6676)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Given a source capability of h264 and ulaw, a destination capability of
h264 and g722 then ast_translator_best_choice() would pick h264 as the
best choice even though h264 is a video codec and Asterisk only supports
translation of audio codecs. When the audio starts flowing, there are
warnings about a codec mismatch when the channel tries to write a frame to
the peer.
* Made ast_translator_best_choice() only select audio codecs.
* Restore a check in channel.c:set_format() lost after v1.8 to prevent
trying to set a non-audio codec.
This is an intermediate patch for a series of patches aimed at improving
translation path choices for ASTERISK-24841.
This patch is a complete enough fix for ASTERISK-21777 as the v11 version
of ast_translator_best_choice() does the same thing. However, chan_sip.c
still somehow tries to call ast_codec_choose() which then calls
ast_best_codec() with a capability set that doesn't contain any audio
formats for the incoming call. The remaining warning message seems to be
a benign transient.
ASTERISK-21777 #close
Reported by: Nick Ruggles
ASTERISK-24380 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4605/
........
Merged revisions 434614 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434615 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Until we have a true module management facility it's sometimes necessary for one
module to force a reload on another before its own load is complete. If
Asterisk isn't fully booted yet, these reloads are deferred. The problem is
that asterisk reports fully booted before processing the deferred reloads which
means Asterisk really isn't quite ready when it says it is.
This patch moves the report of fully booted after the processing of the deferred
reloads is complete.
Since the pjsip stack has the most number of related modules, I ran the
channels/pjsip testsuite to make sure there aren't any issues. All tests
passed.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4604/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes autological comparison warnings in the following:
* chan_skinny: letohl may return a signed or unsigned value, depending on the
macro chosen
* func_curl: Provide a specific cast to CURLoption to prevent mismatch
* cel: Fix enum comparisons where the enum can never be negative
* enum: Fix comparison of return result of dn_expand, which returns a signed
int value
* event: Fix enum comparisons where the enum can never be negative
* indications: tone_data.freq1 and freq2 are unsigned, and hence can never be
negative
* presencestate: Use the actual enum value for INVALID state
* security_events: Fix enum comparisons where the enum can never be negative
* udptl: Don't bother to check if the return value from encode_length is less
than 0, as it returns an unsigned int
* translate: Since the parameters are unsigned int, don't bother checking
to see if they are negative. The cast to unsigned int would already blow
past the matrix bounds.
* res_pjsip_exten_state: Use a temporary value to cache the return of
ast_hint_presence_state
* res_stasis_playback: Fix enum comparisons where the enum can never be
negative
* res_stasis_recording: Add an enum value for the case where the recording
operation is in error; fix enum comparisons
* resource_bridges: Use enum value as opposed to -1
* resource_channels: Use enum value as opposed to -1
Review: https://reviewboard.asterisk.org/r/4533
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4533.patch submitted by dkdegroot (License 6600)
........
Merged revisions 434469 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434470 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel enters the bridging system it is first made compatible with
the bridge and then the bridge technology makes the channel compatible
with the technology. For all but the DAHDI native and softmix bridge
technologies the make channel compatible with the bridge step is an
effective noop because the other technologies allow all audio formats.
For the DAHDI native bridge technology it doesn't matter because it is not
an initial bridge technology and chan_dahdi allows only one native format
per channel. For the softmix bridge technology, it is a noop at best and
harmful at worst because the wrong translation path could be setup if the
channel's native formats allow more than one audio format.
This is an intermediate patch for a series of patches aimed at improving
translation path choices.
* Removed code dealing with the unnecessary step of making the channel
compatible with the bridge.
ASTERISK-24841
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4600/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When registering to a SIP server with TLS, Asterisk will accept CA signed
certificates with a common name that was signed for a domain other than the
one requested if it contains a null character in the common name portion of
the cert. This patch fixes that by checking that the common name length
matches the the length of the content we actually read from the common name
segment. Some certificate authorities automatically sign CA requests when
the requesting CN isn't already taken, so an attacker could potentially
register a CN with something like www.google.com\x00www.secretlyevil.net
and have their certificate signed and Asterisk would accept that certificate
as though it had been for www.google.com - this is a security fix and is
noted in AST-2015-003.
ASTERISK-24847 #close
Reported by: Maciej Szmigiero
Patches:
asterisk-null-in-cn.patch submitted by mhej (license 6085)
........
Merged revisions 434337 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 434338 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After completing an attended transfer the transfer target channel (the one that
gets swapped out) was not being hung up after leaving the bridge. This resulted
in a channel possibly being left around. Added an explicit softhangup for the
channel in question after the transfer is successfully completed in order to
make sure the channel is hung up.
ASTERISK-24782 #close
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4575/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some applications - such as SLA - a phone pressing hold should not behave
in the fashion that the Asterisk core would like it to. Instead, the hold
action has some application specific behaviour associated with it - such as
disconnecting the channel that initiated the hold; only playing MoH to channels
in the bridge if the channels are of a particular type, etc.
One way of accomplishing this is to use a framehook to intercept the
hold/unhold frames, raise an event, and eat the frame. Tasty. This patch
accomplishes that using a new dialplan function, HOLD_INTERCEPT.
In addition, some general cleanup of raising hold/unhold Stasis messages was
done, including removing some RAII_VAR usage.
Review: https://reviewboard.asterisk.org/r/4549/
ASTERISK-24922 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These are fixes for compilation under gcc 5.0...
chan_sip.c: In parse_request needed to make 'lim' unsigned.
inline_api.h: Needed to add a check for '__GNUC_STDC_INLINE__' to detect C99
inline semantics (same as clang).
ccss.c: In ast_cc_set_parm, needed to fix weird comparison.
dsp.c: Needed to work around a possible compiler bug. It was throwing
an array-bounds error but neither
sgriepentrog, rmudgett nor I could figure out why.
manager.c: In action_atxfer, needed to correct an array allocation.
This patch will go to 11, 13, trunk.
Review: https://reviewboard.asterisk.org/r/4581/
Reported-by: Jeffrey Ollie
Tested-by: George Joseph
ASTERISK-24932 #close
........
Merged revisions 434113 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434114 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes an invalid format specifier used in the formatting of an
ERROR message in the framehook code. The format specifier specifies a
type of 'unsigned short', but the argument passed to it is of type 'int'.
The patch changes the format specifier to 'i'.
Review: https://reviewboard.asterisk.org/r/4540
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4535.patch submitted by dkdegroot (License 6600)
........
Merged revisions 434087 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Versions of Asterisk prior to 12 defaulted to 8000 as a sample rate
if one was not provided by a format. In Asterisk 13, this was removed.
The result was that some calculations which involve dividing by the
sample rate resulted in dividing by 0. The fix being put in place
here is to have the same default fallback that was present in previous
versions of Asterisk.
Asterisk-24914 #close
Reported by Marcello Ceschia
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes some invalid enum conversion warnings caught by clang. In
particular:
* chan_sip: Several functions mixed usage of the st_refresher_param
enum and st_refresher enum. This patch corrects the functions to use the
right enum.
* chan_pjsip: Fixed mixed usage of ast_sip_session_t38state and ast_t38_state.
* strings: Fixed incorrect usage of AO2 flags with strings container.
* res_stasis: Change a return enumeration to stasis_app_user_event_res.
Review: https://reviewboard.asterisk.org/r/4535
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4535.patch submitted by dkdegroot (License 6600)
........
Merged revisions 433746 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The patch in r433720 caused a warning to be kicked back by gcc. It occurred
due to this check in unistd.h:
if (__nbytes > __bos0 (__buf))
return __read_chk_warn (__fd, __buf, __nbytes, __bos0 (__buf));
That is, if __nbytes is greater than the result of GCC's built-in object size
for the struct, we'll kick back a warning.
As it turns out, this is because there is an error in the code in the patch.
We are passing the address of the pointer to the struct, not iev, which is a
pointer to the struct. Hence, the number of bytes is probably going to be lot
larger than the number of bytes that make up a pointer! This patch changes
the code just read from the pointer to the struct - which fixes the warning.
ASTERISK-24917
........
Merged revisions 433743 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433744 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a warning caught by clang, wherein a variable sized struct is
not located at the end of a struct. While the code in question actually
expected this, this is a good warning to watch for. Hence, this patch refactors
the code in question to not have two variable length elements in the same
struct.
Review: https://reviewboard.asterisk.org/r/4530/
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4530.patch submitted by dkdegroot (License 6600)
........
Merged revisions 433717 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433718 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces a new logger routine ast_log_safe. This routine should be
used for all error messages in code that can be run as a result of ast_log.
ast_log_safe does nothing if run recursively. All error logging in
astobj2.c, strings.c and utils.h have been switched to ast_log_safe.
This required adding support for raw threadstorage. This provides direct
access to the void* pointer in threadstorage. In ast_log_safe, NULL is used
to signify that this thread is not already running ast_log_safe, (void*)1 when
it is already running. This was done since it's critical that ast_log_safe
do nothing that could log during recursion checking.
ASTERISK-24155 #close
Reported by: Timo Teräs
Review: https://reviewboard.asterisk.org/r/4502/
........
Merged revisions 433522 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since 'core stop now' and 'core restart now' do not stop modules,
it is unsafe for most of the core to run cleanups. Originally all
cleanups used ast_register_atexit, and were only changed when it
was shown to be unsafe. ast_register_atexit is now used only when
absolutely required to prevent corruption and close child processes.
Exceptions that need to use ast_register_atexit:
* CDR: Flush records.
* res_musiconhold: Kill external applications.
* AstDB: Close the DB.
* canary_exit: Kill canary process.
ASTERISK-24142 #close
Reported by: David Brillert
ASTERISK-24683 #close
Reported by: Peter Katzmann
ASTERISK-24805 #close
Reported by: Badalian Vyacheslav
ASTERISK-24881 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4500/
Review: https://reviewboard.asterisk.org/r/4501/
........
Merged revisions 433495 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Attempting to execute DTMF in a confbridge while file playback (prompt,
announcement, etc) is occurring is not allowed. You have to wait until
the sound file has completed before entering DTMF. This patch fixes it
so that app_confbridge now monitors for dtmf key presses during menu
driven file playback. If a key is pressed playback stops and it executes
the matched menu option.
ASTERISK-24864 #close
Reported by: Steve Pitts
Review: https://reviewboard.asterisk.org/r/4510/
........
Merged revisions 433445 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433446 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* In res/res_sorcery_realtime.c: Broke long line.
* In main/bucket.c: Eliminated unnecessary NULL check as
ast_sorcery_unref() is NULL tolerant and set the global object to NULL
after unref in the system shutdown bucket_cleanup().
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses compilation issues for OpenBSD. Specifically, it
addresses:
* It allows including <sys/vmmeter.h> in asterisk.c
* Provides a needed (size_t) cast in xmldoc.c
In 13+, it also addresses a conditional inclusion in loader.c.
Review: https://reviewboard.asterisk.org/r/4506
ASTERISK-24880 #close
Reported by: snuffy
Tested by: snuffy
patches:
misc-openbsd.diff uploaded by snuffy (License 5024)
........
Merged revisions 433245 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433247 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind found a memory leak and invalid access.
* Fix invalid access by sscanf() being fed a non-nul terminated string of
digits in res/res_pjsip_sdp_rtp.c:get_codecs().
* Fix memory leak in main/sorcery.c:sorcery_object_field_destructor().
* Fix potential NULL pointer dereference in
main/xmldoc.c:xmldoc_get_syntax_config_option().
Review: https://reviewboard.asterisk.org/r/4513/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind found some memory leaks associated with ast_sockaddr_resolve().
Most of the leaks had already been fixed by earlier memory leak hunt
patches. This patch performs an audit of ast_sockaddr_resolve() and found
one more.
* Fix ast_sockaddr_resolve() memory leak in
apps/app_externalivr.c:app_exec().
* Made main/netsock2.c:ast_sockaddr_resolve() always set the addrs
parameter for safety so the pointer will never be uninitialized on return.
The same goes for res/res_pjsip_acl.c:extract_contact_addr().
* Made functions that call ast_sockaddr_resolve() with RAII_VAR()
controlling the addrs variable use ast_free instead of ast_free_ptr to
provide better MALLOC_DEBUG information.
Review: https://reviewboard.asterisk.org/r/4509/
........
Merged revisions 433056 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In realtime, it is normal to have a database with both 'allow' and 'disallow'
columns in the schema. It is perfectly valid to have an 'allow' value of
'!all,g722,ulaw,alaw' and no 'disallow' value. Unlike in static conf files,
you can't *not* provide the disallow value. Thus, the empty disallow value
causes a spurious WARNING message, which is kind of annoying.
This patch makes it so that a 'disallow' value with no ... value ... is
ignored. Granted, you can still screw this up as well, as technically
specifying 'disallow=all,!ulaw' allows only ulaw, and then you would have no
'allow' value in your database. But really, why would you do that? WHY?
ASTERISK-16779 #close
Reported by: Atis Lezdins
........
Merged revisions 432970 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432971 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "core set debug channel" CLI command mistakenly had source filenames
added to its tab completion. This occurred because the CLI generator fell back
to the "core set debug" command which permits setting debug at a source
filename level.
ASTERISK-21038 #close
Reported by: Richard Kenner
........
Merged revisions 432944 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an audiohook is created (which is used by the various Spy applications
and Snoop channel in Asterisk 13+), it initially is given a sample rate of
8kHz. It is expected, however, that this rate may change based on the media
that passes through the audiohook. However, the read/write operations on the
audiohook behave very differently.
When a frame is written to the audiohook, the format of the frame is checked
against the internal sample rate. If the rate of the format does not match
the internal sample rate, the internal sample rate is updated and a new SLIN
format is chosen based on that sample rate. This works just fine.
When a frame is read, however, we do something quite different. If the format
rate matches the internal sample rate, all is fine. However, if the rates
don't match, the audiohook attempts to "fix up" the number of samples that
were requested. This can result in some seriously large number of samples
being requested from the read/write factories.
Consider the worst case - 192kHz SLIN. If we attempt to read 20ms worth of
audio produced at that rate, we'd request 3840 samples (192000 / (1000 / 20)).
However, if the audiohook is still expecting an internal sample rate of 8000,
we'll attempt to "fix up" the requested samples to:
samples_converted = samples * (ast_format_get_sample_rate(format) /
(float) audiohook->hook_internal_samp_rate);
which is:
92160 = 3840 * (192000 / 8000)
This results in us attempting to read 92160 samples from our factories, as
opposed to the 3840 that we actually wanted. On a 64-bit machine, this
miraculously survives - despite allocating up to two buffers of length 92160
on the stack. The 32-bit machines aren't quite so lucky. Even in the case where
this works, we will either (a) get way more samples than we wanted; or (b) get
about 3840 samples, assuming the timing is pretty good on the machine.
Either way, the calculation being performed is wrong, based on the API users
expectations.
My first inclination was to allocate the buffers on the heap. As it is,
however, there's at least two drawbacks with doing this:
(1) It's a bit complicated, as the size of the buffers may change during the
lifetime of the audiohook (ew).
(2) The stack is faster (yay); the heap is slower (boo).
Since our calculation is flat out wrong in the first place, this patch fixes
this issue by instead updating the internal sample rate based on the format
passed into the read operation. This causes us to read the correct number of
samples, and has the added benefit of setting the audihook with the right
SLIN format.
Note that this issue was caught by the Asterisk Test Suite as a result of
r432195 in the 13 branch. Because this issue is also theoretically possible
in Asterisk 11, the change is being made here as well.
Review: https://reviewboard.asterisk.org/r/4475/
........
Merged revisions 432810 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432811 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RAII_VAR, which is used extensively in Asterisk to manage reference counted
resources, uses a GCC extension to automatically invoke a cleanup function
when a variable loses scope. While this functionality is incredibly useful
and has prevented a large number of memory leaks, it also prevents Asterisk
from being compiled with clang.
This patch updates the RAII_VAR macro such that it can be compiled with clang.
It makes use of the BlocksRuntime, which allows for a closure to be created
that performs the actual cleanup.
Note that this does not attempt to address the numerous warnings that the clang
compiler catches in Asterisk.
Much thanks for this patch goes to:
* The folks on StackOverflow who asked this question and Leushenko for
providing the answer that formed the basis of this code:
http://stackoverflow.com/questions/24959440/rewrite-gcc-cleanup-macro-with-nested-function-for-clang
* Diederik de Groot, who has been extremely patient in working on getting this
patch into Asterisk.
Review: https://reviewboard.asterisk.org/r/4370/
ASTERISK-24133
ASTERISK-23666
ASTERISK-20399
ASTERISK-20850 #close
Reported by: Diederik de Groot
patches:
RAII_CLANG.patch uploaded by Diederik de Groot (License 6600)
........
Merged revisions 432807 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The localtime management in the Asterisk core contains a thread that watches
for changes in the local timezone. On systems where the directory containing
/etc/localtime is modified frequently, the thread monitoring the changes will
be woken up to determine if any changes in timezone have occurred. When using
kqueue(2), this can cause a leak of file descriptors due to some improper
management of resources.
This patch updates the kqueue(2) handling in localtime, such that is no longer
leaks resources.
Review: https://reviewboard.asterisk.org/r/4450/
ASTERISK-24739 #close
Reported by: Ed Hynan
patches:
11.15.0-u.diff uploaded by Ed Hynan (Licnese 6680)
11.7.0-u.diff uploaded by Ed Hynan (License 6680)
svn-trunk-Jan-26-2015-u.diff uploaded by Ed Hynan (License 6680)
........
Merged revisions 432691 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a 'core restart now' or 'core stop now' is executed and a channel is
currently in a media operation, the translator matrix can be destroyed while a
channel is currently blocked on getting the best translation choice
(see ast_translator_best_choice). When the channel gets the mutex, the
translation matrix now has invalid memory, and Asterisk crashes.
This patch does two things:
(1) We now only clean up the translation matrix on a graceful shutdown. In that
case, there are no channels, and so there is no risk of this occurring.
(2) We also now set the __matrix and __indextable to NULL. In some initial
backtraces when this occurred, it looked as if there was a memory corruption
occurring, and it wasn't until we determined that something had restarted
Asterisk that the issue became clear. By setting these to NULL on shutdown,
it becomes a bit easier to determine why a crash is occurring.
Note that we could litter the code with NULL checks on the __matrix, but the
act of making the translation matrix cleaned up on shutdown should preclude
this issue from occurring in the first place, and this part of the code needs
to be as fast as possible.
Review: https://reviewboard.asterisk.org/r/4457/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sending the following ARI commands caused Asterisk to crash if the JSON
body 'variables' object passes values of types other than strings.
POST /ari/channels
POST /ari/channels/{channelid}
PUT /ari/endpoints/sendMessage
PUT /ari/endpoints/{tech}/{resource}/sendMessage
* Eliminated RAII_VAR usage in ast_ari_channels_originate_with_id(),
ast_ari_channels_originate(), ast_ari_endpoints_send_message(), and
ast_ari_endpoints_send_message_to_endpoint().
ASTERISK-24751 #close
Reported by: jeffrey putnam
Review: https://reviewboard.asterisk.org/r/4447/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a self-destruction option to the
dial api. The usefulness of this is mostly when
using async mode to spawn a separate thread used
to handle the new call, while the calling thread
is allowed to go on about other business.
The only alternative to this option would be the
calling thread spawning a new thread, or hanging
around itself waiting to destroy the dial struct
after completion.
Example of use (minus error checking):
struct ast_dial *dial = ast_dial_create();
ast_dial_append(dial, "PJSIP", "200", NULL);
ast_dial_option_global_enable(dial, AST_DIAL_OPTION_ANSWER_EXEC, "Echo");
ast_dial_option_global_enable(dial, AST_DIAL_OPTION_SELF_DESTROY, NULL);
ast_dial_run(dial, NULL, 1);
The dial_run call will return almost immediately
after spawning the new thread to run and monitor
the dial. If the call is answered, it is placed
into the echo app. When completed, it will call
ast_dial_destroy() on the dial structure.
Note that any allocations made to pass values to
ast_dial_set_user_data() or dial options must be
free'd in a state callback function on any of:
AST_DIAL_RESULT_UNASWERED,
AST_DIAL_RESULT_ANSWERED,
AST_DIAL_RESULT_HANGUP, or
AST_DIAL_RESULT_TIMEOUT.
Review: https://reviewboard.asterisk.org/r/4443/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, SDP offers negotiating SDES-SRTP crypto attributes would
be rejected if those crypto attributes contained either a key lifetime or a
MKI parameter. While from a theoretical point of view this was defensible -
Asterisk does not support key lifetimes or multiple crypto keys - from a
practical point of view, this is quite a problem. A large number of endpoints
offer lifetimes/MKI, which Asterisk can tolerate so long as it doesn't actually
have to support anything more than a single key or refresh the key.
In reality, this is (so far as we've seen) always the case.
This patch is a forward port of Olle's work in the lingon-srtp-key-lifetime-1.8
branch. To quote Olle from ASTERISK-17721, it handles lifetime/MKI parameters
in the following fashion:
> The Lingon branch now handle lifetime and MKI parameters.
>
> We only accept lifetimes up to max for the crypto and higher than 10 hours
> for packetization of 20 ms (50 pps).
>
> We only handle MKI with index 1.
>
> We do not really bother with counting packets and reinviting at end of
> lifetime, so the min of 10 hours kind of takes care of most calls. If there
> are longer ones, we rely on the other side for re-invites.
>
> It's still not perfect, but I personally think this is an improvement. A
> configuration option for minimum lifetime accepted could be added.
When the patch was ported forward, I decided against adding a configuration
option as Olle's handling was more than sufficient for every case I've seen
come through the issue tracker or through interoperability testing. We can
revisit that decision if it proves to be false.
A few small other tweaks were made to the surrounding code to reduce
indentation and provide better type safety for the 'tag' parameter.
Review: https://reviewboard.asterisk.org/r/4419/
Review: https://reviewboard.asterisk.org/r/4418/
ASTERISK-17721 #close
Reported by: Terry Wilson
ASTERISK-17899 #close
Reported by: Dwayne Hubbard
patches:
lingon-srtp-key-lifetime-1.8.diff uploaded by oej (License 5267)
ASTERISK-20233
Reported by: tootai
ASTERISK-22748
Reported by: Alejandro Mejia
........
Merged revisions 432239 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432258 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses the following problems:
* ari/resource_channels: In ARI, we currently create a format capability
structure of SLIN and apply it to the new channel being created. This was
originally done when the PBX core was used to create the channel, as there
was a condition where a newly created channel could be created without any
formats. Unfortunately, now that the Dial API is being used, this has two
drawbacks:
(a) SLIN, while it will ensure audio will flows, can cause a lot of
needless transcodings to occur, particularly when a Local channel is
created to the dialplan. When no format capabilities are available, the
Dial API handles this better by handing all audio formats to the requsted
channels. As such, we defer to that API to provide the format
capabilities.
(b) If a channel (requester) is causing this channel to be created, we
currently don't use its format capabilities as we are passing in our own.
However, the Dial API will use the requester channel's formats if none
are passed into it, and the requester channel exists and has format
capabilities. This is the "best" scenario, as it is the most likely to
create a media path that minimizes transcoding.
Fixing this simply entails removing the providing of the format capabilities
structure to the Dial API.
* chan_pjsip: Rather than blindly picking the first format in the format
capability structure - which actually *can* be a video or text format - we
select an audio format, and only pick the first format if that fails. That
minimizes the weird scenario where we attempt to transcode between video/audio.
* res_pjsip_sdp_rtp: Applied the joint capapbilites to the format structure.
Since ast_request already limits us down to one format capability once the
format capabilities are passed along, there's no reason to squelch it here.
* channel: Fixed a comment. The reason we have to minimize our requested
format capabilities down to a single format is due to Asterisk's inability
to convey the format to be used back "up" a channel chain. Consider the
following:
PJSIP/A => L;1 <=> L;2 => PJSIP/B
g,u,a g,u,a g,u,a u
That is, we have PJSIP/A dialing a Local channel, where the Local;2 dials
PJSIP/B. PJSIP/A has native format capabilities g722,ulaw,alaw; the Local
channel has inherited those format capabilities down the line; PJSIP/B
supports only ulaw. According to these format capabilities, ulaw is
acceptable and should be selected across all the channels, and no
transcoding should occur. However, there is no way to convey this: when L;2
and PJSIP/B are put into a bridge, we will select ulaw, but that is not
conveyed to PJSIP/A and L;1. Thus, we end up with:
PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
g g X u u
Which causes g722 to be written to PJSIP/B.
Even if we can convey the 'ulaw' choice back up the chain (which through
some severe hacking in Local channels was accomplished), such that the chain
looks like:
PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
u u u u
We have no way to tell PJSIP/A's *channel driver* to Answer in the SDP back
with only 'ulaw'. This results in all the channel structures being set up
correctly, but PJSIP/A *still* sending g722 and causing the chain to fall
apart.
There's a lot of difficulty just in setting this up, as there are numerous
race conditions in the act of bridging, and no clean mechanism to pass the
selected format backwards down an established channel chain. As such, the
best that can be done at this point in time is clarifying the comment.
Review: https://reviewboard.asterisk.org/r/4434/
ASTERISK-24812 #close
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432195 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Processing an AOC-E event that does not or no longer has a channel
association causes a crash.
The problem with posting AOC events to the channel topic is that AOC-E
events don't always have a channel association and posting the event to
the all channels topic is just wrong. AOC-E events do however have their
own charging association method to refer to the agreement with the
charging entity.
* Changed the AOC events to post to the AMI manager topic instead of the
channel topics. If a channel is associated with the event then channel
snapshot information is supplied with the AMI event.
* Eliminated RAII_VAR() usage in aoc_to_ami() and ast_aoc_manager_event().
This patch supercedes the patch on Review: https://reviewboard.asterisk.org/r/4427/
ASTERISK-22670 #close
Reported by: klaus3000
ASTERISK-24689 #close
Reported by: Marcel Manz
ASTERISK-24740 #close
Reported by: Panos Gkikakis
Review: https://reviewboard.asterisk.org/r/4430/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
Matthew Jordan
George Joseph
Jonathan Rose
Kevin Harwell
Mark Michelson
Corey Farrell
Scott Griepentrog
Joshua Colp