Currently, everytime a sample rate change occurs (on read or write) the
associated factory buffers are reset. If the requested sample rate on a
read differed from that of a write then the buffers are continually reset
on every read and write. This has the side effect of emptying the buffer,
thus there being no data to read and then write to a file in the case of
call recording.
This patch fixes it so that an audiohook_list's rate always maintains the
maximum sample rate among hooks and formats. Audiohook sample rates are
only overwritten by this value when slin native compatibility is turned on.
Also, the audiohook sample rate can only overwrite the list's sample rate
when its rate is greater than that of the list or if compatibility is
turned off. This keeps the rate from constantly switching/resetting.
ASTERISK-24944 #close
Reported by: Ronald Raikes
Change-Id: Idab4dfef068a7922c09cc631dda27bc920a6c76f
Whenever possible, audiohooks and framehooks will now be copied over
to the channel that the masquerading channel gets cloned into. This
should occur for all audiohooks and most framehooks. As a result,
in Asterisk 12.5 and up, the AUDIOHOOK_INHERIT function is now
deprecated and its behavior is essentially the new default for all
audiohooks, plus some additional audiohooks/framehooks.
Review: https://reviewboard.asterisk.org/r/3721/
........
Merged revisions 418914 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418936 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made ast_audiohook_detach_list() and ast_audiohook_write_list_empty()
NULL tolerant.
* Made ast_audiohook_detach_list() return void since it is a destructor.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394836 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes numerous doxygen warnings across Asterisk. It also updates
the makefile to regenerate the doxygen configuration on the local system
before running doxygen to help prevent warnings/errors on the local system.
Much thanks to Andrew for tackling one of the Asterisk janitor projects!
(issue ASTERISK-20259)
Reported by: Andrew Latham
Patches:
doxygen_partial.diff uploaded by Andrew Latham (license 5985)
make_progdocs.diff uploaded by Andrew Latham (license 5985)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST_AUDIOHOOK_TRIGGER_WRITE and AST_AUDIOHOOK_WANTS_DTMF were overlapping which
may have caused unintended side effects. This patch moves
AST_AUDIOHOOK_TRIGGER_WRITE, and updates AST_AUDIOHOOK_TRIGGER_MODE to reflect
the original intention.
This will affect existing modules that use these flags, so be sure to recompile
as necessary.
(closes issue ASTERISK-19246)
Reported by: feyfre
........
Merged revisions 353598 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353599 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r279949 | dvossel | 2010-07-27 15:57:00 -0500 (Tue, 27 Jul 2010) | 31 lines
Merged revisions 279946 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r279946 | dvossel | 2010-07-27 15:54:32 -0500 (Tue, 27 Jul 2010) | 24 lines
Merged revisions 279945 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r279945 | dvossel | 2010-07-27 15:33:40 -0500 (Tue, 27 Jul 2010) | 19 lines
remove empty audiohook write list on channel
If a channel has an audiohook write list created on it, that
list stays on the channel until the channel is destroyed. There
is no reason to keep that list on the channel if it becomes empty.
If it is empty that just means we are doing needless translating
for every ast_read and ast_write. This patch removes the audiohook
list from the channel once it is detected to be empty on either a
read or write. If a audiohook is added back to the channel after
this list is destroyed, the list just gets recreated as if it never
existed to begin with.
(closes issue #17630)
Reported by: manvirr
Review: https://reviewboard.asterisk.org/r/799/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r260049 | dvossel | 2010-04-29 10:31:02 -0500 (Thu, 29 Apr 2010) | 14 lines
Fixes crash in audiohook_write_list
The middle_frame in the audiohook_write_list function was
being freed if a audiohook manipulator returned a failure.
This is incorrect logic. This patch resolves this and
adds detailed descriptions of how this function should work
and why manipulator failures must be ignored.
(closes issue #17052)
Reported by: dvossel
Tested by: dvossel
(closes issue #16196)
Reported by: atis
Review: https://reviewboard.asterisk.org/r/623/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added a new manager command to mute/unmute MixMonitor audio on a channel.
Added a new feature to audiohooks so that you can mute either read / write
(or both) types of frames - this allows for MixMonitor to mute either side
of the conversation without affecting the conversation itself.
(closes issue #16740)
Reported by: jmls
Review: https://reviewboard.asterisk.org/r/487/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During the process of removing an audiohook from one channel
and attaching it to another the audiohook's status is updated
to DONE and then back to whatever it was previously. Typically
updating the status after setting it to DONE is not a good idea
because DONE can trigger unrecoverable audiohook destruction
events... because of this a conditional check was added to
audiohook_update_status to explicitly prevent the audiohook
from ever changing after being set to DONE. It was this check
that prevented audiohook inherit from work properly though.
Now ast_audiohook_move_by_source is treated as a special exception,
as the audiohook must be returned to its previous status after
attaching it to the new channel. This is only a safe operation
because the audiohook's lock is held the entire time, otherwise
this could cause trouble.
(closes issue #16522)
Reported by: corruptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@238635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197537 | mmichelson | 2009-05-28 09:49:13 -0500 (Thu, 28 May 2009) | 21 lines
Add flags to chanspy audiohook so that audio stays in sync.
There are two flags being added to the chanspy audiohook here. One
is the pre-existing AST_AUDIOHOOK_TRIGGER_SYNC flag. With this set,
we ensure that the read and write slinfactories on the audiohook do
not skew beyond a certain tolerance.
In addition, there is a new audiohook flag added here,
AST_AUDIOHOOK_SMALL_QUEUE. With this flag set, we do not allow for
a slinfactory to build up a substantial amount of audio before
flushing it. For this particular issue, this means that the person
spying on the call will hear the conversations in real time with very
little delay in the audio.
(closes issue #13745)
Reported by: geoffs
Patches:
13745.patch uploaded by mmichelson (license 60)
Tested by: snblitz
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Copied from my review board description:
This is a continuation of the API changes documentation started for describing
changes between releases. Most of the API changes were pretty simple needing
only to be brought to attention via the new "Asterisk API Changes" list.
However, if you see anything that needs further explanation feel free to
supplement what is there. The current method of documenting is to add (in the
header file): \version <ver number> <description of changes> and then to add
the function to the change list in doxyref.h on the AstAPIChanges page. I also
made sure all the functions that were newly added were tagged with \since
1.6.1. I think this is a good habit to start both for the historical aspect as
well as for the future ability to easily add a "New Asterisk API" page.
Review: http://reviewboard.digium.com/r/190/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180719 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This function is being added as a method to allow for
an audiohook to move to a new channel during a channel
masquerade. The most obvious use for such a facility is
for MixMonitor when a transfer is performed. Prior to
the addition of this functionality, if a channel
running MixMonitor was transferred by another party, then
the recording would stop once the transfer had completed.
By using AUDIOHOOK_INHERIT, you can make MixMonitor
continue recording the call even after the transfer
has completed.
It has also been determined that since this is seen
by most as a bug fix and is not an invasive change,
this functionality will also be backported to 1.4 and
merged into the 1.6.0 branches, even though they are
feature-frozen.
(closes issue #13538)
Reported by: mbit
Patches:
13538.patch uploaded by putnopvut (license 60)
Tested by: putnopvut
Review: http://reviewboard.digium.com/r/102/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r149204 | mmichelson | 2008-10-14 18:00:01 -0500 (Tue, 14 Oct 2008) | 12 lines
Add a tolerance period for sync-triggered audiohooks
so that if packetization of audio is close (but not equal)
we don't end up flushing the audiohooks over small
inconsistencies in synchronization.
Related to issue #13005, and solves the issue
for most people who were experiencing the problem.
However, a small number of people are still experiencing
the problem on long calls, so I am not closing
the issue yet
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@149205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and denoising to a channel, AGC() and DENOISE(). Also included, is a change
to the audiohook API to add a new function (ast_audiohook_remove) that can
remove an audiohook from a channel before it is detached.
This code is based on a contribution from Switchvox.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114926 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108083 | file | 2008-03-12 15:26:37 -0300 (Wed, 12 Mar 2008) | 4 lines
Add a trigger mode that triggers on both read and write. The actual function that returns the combined audio frame though will wait until both sides have fed in audio, or until one side stops (such as the case when you call Wait).
(closes issue #11945)
Reported by: xheliox
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This works in much the same way as the automonitor, except that instead of using the monitor
app, it uses the mixmonitor app. By providing an 'x' or 'X' as a dial or queue option, a DTMF
sequence may be entered (as defined in features.conf) to start the one-touch mixmonitor.
This patch also introduces some new API calls to the audiohooks code for searching for an audiohook
by type and for searching for a running audiohook by type.
Big thanks to joetester for writing the initial patch, testing it and patiently waiting for it to
be committed.
(closes issue #10185, reported and patched by xmarksthespot)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
functions. As inline functions, the lock debug information will show that
these are always locked in audiohooks.h instead of the file where the lock was
actually acquired.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81264 65c4cc65-6c06-0410-ace0-fbb531ad65f3
