https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r292786 | lmadsen | 2010-10-22 16:16:12 -0500 (Fri, 22 Oct 2010) | 13 lines
Update the LDIF file for LDAP.
The LDIF file asterisk.ldif was quite a bit out of date from the asterisk.ldap-schema file, so I've
now updated that to be in sync. The asterisk.ldif file being out of sync was a problem on my systems
where I was doing an ldapadd to import the schema into the LDAP database, and the existing file
would cause problems and ERROR messages when registering.
Additional documention has been added based on feedback in the issue I'm closing.
(closes issue #13861)
Reported by: scramatte
Patches:
ldap-update.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, jcovert, suretec, rgenthner
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@292787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds information about the encryption setting to 'sip show
peers' and removes an out-of-date comment from res_srtp.c and instead
directs users to the proper documentation.
(closes issue #18140)
Reported by: chodorenko
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@292309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While testing chan_gtalk I noticed jabber was using my IPv6 address
and not IPv4. When using bindaddr=0.0.0.0 it is possible for ast_find_ourip()
to return both IPv6 and IPv4 results. Adding a family parameter gives you
the ablility to choose.
Since jabber/gtalk/h323 do not support IPv6, we should only return IPv4 results.
Review: https://reviewboard.asterisk.org/r/973/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@291758 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289798 | jpeeler | 2010-10-01 18:01:31 -0500 (Fri, 01 Oct 2010) | 22 lines
Merged revisions 289797 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289797 | jpeeler | 2010-10-01 17:58:38 -0500 (Fri, 01 Oct 2010) | 15 lines
Change RFC2833 DTMF event duration on end to report actual elapsed time.
The scenario here is with a non P2P early media session. The reported time
length of DTMF presses are coming up short when sending to the remote side.
Currently the event duration is a running total that is incremented when sending
continuation packets. These continuation packets are only triggered upon
incoming media from the remote side, which means that the running total probably
is not going to end up matching the actual length of time Asterisk received
DTMF. This patch changes the end event duration to be lengthened if it is
detected that the end event is going to come up short.
Review: https://reviewboard.asterisk.org/r/957/
ABE-2476
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@289840 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289700 | jpeeler | 2010-10-01 11:21:04 -0500 (Fri, 01 Oct 2010) | 21 lines
Merged revisions 289699 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289699 | jpeeler | 2010-10-01 11:20:00 -0500 (Fri, 01 Oct 2010) | 14 lines
Ensure user portion of SIP URI matches dialplan when using encoded characters.
This commit takes a simliar approach to 288112 and checks the dialplan to
determine the proper action for an incoming contact header as to whether or not
it should be decoded or not. sip_new was blindly always decoding the extension,
which also caused the outgoing contact header to be incorrect as well as failing
to match the encoded extension in the dialplan.
(closes issue #17892)
Reported by: wdoekes
Patches:
bug17892-1.patch uploaded by jpeeler (license 325)
Tested by: wdoekes
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@289701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On every incoming subscribe there is a iteration through all dialogs to find old subscribes and delete them. This is slow and not RFC conform. This was only needed in 1.2 cause a subscribe was not deleted when a dialog was destroyed, after 1.4 a subscribe get removed when its dialog is destroyed.
(closes issue #17950)
Reported by: schmidts
Tested by: schmidts
Review: https://reviewboard.asterisk.org/r/901/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@289622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r288113 | tilghman | 2010-09-21 16:59:46 -0500 (Tue, 21 Sep 2010) | 22 lines
Merged revisions 288112 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r288112 | tilghman | 2010-09-21 16:58:13 -0500 (Tue, 21 Sep 2010) | 15 lines
Try both the encoded and unencoded subscription URI for a match in hints.
When a phone sends an encoded URI for a subscription, the URI is not matched
with the actual hint that is in decoded format. For example, if we have an
extension with a hint that is named: "#5601" or "*5601", the subscription will
work fine if the phone subscribes with an already decoded URI, but when it's
decoded like "%255601" or "%2A5601", Asterisk is unable to match it with the
correct hint.
(closes issue #17785)
Reported by: ramonpeek
Patches:
20100831__issue17785.diff.txt uploaded by tilghman (license 14)
Tested by: ramonpeek
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@288159 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a new feature that allows for parking to custom parking lots to be
accessed directly, rather than with channel variables or by changing the
default parking lot. The extension is set with the parkext option just as the
default parking lot is done. Also, the manager action has been updated to
optionally allow a specified parking lot.
(closes issue #14882)
Reported by: vmikhnevych
Patches:
patch_14882.txt uploaded by mnick (license 874)
modified by me
Review: https://reviewboard.asterisk.org/r/884/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@286931 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r285563 | dvossel | 2010-09-08 16:47:29 -0500 (Wed, 08 Sep 2010) | 54 lines
Fixes interoperability problems with session timer behavior in Asterisk.
CHANGES:
1. Never put "timer" in "Require" header. This is not to our benefit
and RFC 4028 section 7.1 even warns against it. It is possible for one
endpoint to perform session-timer refreshes while the other endpoint does
not support them. If in this case the end point performing the refreshing
puts "timer" in the Require field during a refresh, the dialog will
likely get terminated by the other end.
2. Change the behavior of 'session-timer=accept' in sip.conf (which is
the default behavior of Asterisk with no session timer configuration
specified) to only run session-timers as result of an incoming INVITE
request if the INVITE contains an "Session-Expires" header... Asterisk is
currently treating having the "timer" option in the "Supported" header as
a request for session timers by the UAC. I do not agree with this. Session
timers should only be negotiated in "accept" mode when the incoming INVITE
supplies a "Session-Expires" header, otherwise RFC 4028 says we should
treat a request containing no "Session-Expires" header as a session with
no expiration.
Below I have outlined some situations and what Asterisk's behavior is.
The table reflects the behavior changes implemented by this patch.
SITUATIONS:
-Asterisk as UAS
1. Incoming INVITE: NO "Session-Expires"
2. Incoming INVITE: HAS "Session-Expires"
-Asterisk as UAC
3. Outgoing INVITE: NO "Session-Expires". 200 Ok Response HAS "Session-Expires" header
4. Outgoing INVITE: NO "Session-Expires". 200 Ok Response NO "Session-Expires" header
5. Outgoing INVITE: HAS "Session-Expires".
Active - Asterisk will have an active refresh timer regardless if the other endpoint does.
Inactive - Asterisk does not have an active refresh timer regardless if the other endpoint does.
XXXXXXX - Not possible for mode.
______________________________________
|SITUATIONS | 'session-timer' MODES |
|___________|________________________|
| | originate | accept |
|-----------|------------|-----------|
|1. | Active | Inactive |
|2. | Active | Active |
|3. | XXXXXXXX | Active |
|4. | XXXXXXXX | Inactive |
|5. | Active | XXXXXXXX |
--------------------------------------
(closes issue #17005)
Reported by: alexrecarey
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@285564 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The auth_options_request option was created to do authentication
on OPTIONS request just like INVITES are done. Since it has been
noted that some endpoints use OPTIONS requests as a way of qualifying
a peer and that a 401 authentication response could result in
interoperability issues, this option has been disabled by default.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@285006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
OPTIONS requests should be treated the same as an INVITE
This includes authentication. This patch adds the ability for
incoming out of dialog OPTION requests to be authenticated
before providing a response indicating whether an extension
is available or not. The authentication routine works the
exact same way as it does for incoming INVITEs. This means
that if a peer has 'insecure=invite' in their peer definition,
the same will be true for the processing of the OPTIONS request.
Review: https://reviewboard.asterisk.org/r/881/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@284950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During request to dialog matching, we attempt a best effort routine for fork
detection which requires several elements to be in place. The dialog's
initial request uri is one of those elements. Since it is best effort,
if the init_ruri is not present for some reason we can not proceed with that
routine.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@284561 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adding code to Asterisk that changed the SSRC during bridges and masquerades
broke SRTP functionality. Also broken was handling the situation where an
incoming INVITE had more than one crypto offer. This patch caches the SRTP
policies the we use so that we can change the ssrc and inform libsrtp of the
new streams. It also uses the first acceptable a=crypto line from the incoming
INVITE.
(closes issue #17563)
Reported by: Alexcr
Patches:
srtp.diff uploaded by twilson (license 396)
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/878/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@284477 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r283691 | dvossel | 2010-08-26 10:24:40 -0500 (Thu, 26 Aug 2010) | 25 lines
Merged revisions 283690 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r283690 | dvossel | 2010-08-26 10:22:28 -0500 (Thu, 26 Aug 2010) | 19 lines
Fixed how Asterisk destroys a dialog on channel hangup before invite receives a response.
If an ast_channel with a SIP tech pvt hangs up before the sip dialog gets a response
to its outgoing INVITE, Asterisk used to pretend_ack the INVITE. This is not rfc
compliant and results in confusion at the other endpoint. sip_pretend_ack will ack
and remove all the packets in the retransmit queue. This means that the INVITE will
stop retransmitting, and that any response to that INVITE that comes after the pretend_ack
occurs will be ignored.
Instead of faking any sort of acknowledgement for an outgoing INVITE during an internal
hangup, we should let the protocol stack process the INVITE transaction and terminate
the dialog properly. This is achieved by setting the PENDING_BYE flag. When this flag
is used, once the dialog proceeds to an escapable state the transaction will either be
canceled with a SIP_CANCEL or completed followed immediately by a BYE. Attempting to do
this any other way is incorrect. If the endpoint is not responding to the INVITE request,
the INVITE must continue to be retransmitted until it times out which will result in the
dialog being destroyed.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@283692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r283594 | dvossel | 2010-08-25 17:56:42 -0500 (Wed, 25 Aug 2010) | 7 lines
Add to and from tags to NOTIFY dialog-info xml body so pickup can occur.
When pedantic mode is used, the dialog-info xml generated during a
ringing event must contain the to and from tag values. Otherwise if
a pickup occurs using INVITE with replaces, Astrisk will not be able
to locate the subscription.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@283595 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r283558 | dvossel | 2010-08-25 10:52:54 -0500 (Wed, 25 Aug 2010) | 10 lines
Asterisk will not advertise session timers are supported when 'session-timers=refuse' is used.
Asterisk now dynamically builds the "Supported" header depending
on what is enabled/disabled in sip.conf. Session timers used
to always be advertised as being supported even when they were disabled
in the configuration. This caused problems with some end points.
(issue #17005)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@283559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r283381 | dvossel | 2010-08-24 11:07:37 -0500 (Tue, 24 Aug 2010) | 18 lines
Merged revisions 283380 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r283380 | dvossel | 2010-08-24 11:01:51 -0500 (Tue, 24 Aug 2010) | 11 lines
This fix makes sure the ast_channel hangs up correctly when the dialog's PENDING_BYE flag is set.
When the pending bye flag is used, it is possible that the dialog will terminate
and leave the sip_pvt->owner channel up. This is because we never hangup the
ast_channel after sending the SIP_BYE request. When we receive the response for
the SIP_BYE we set need_destroy which we would expect to destroy the dialog on the
next do_monitor loop, but this is not the case. The dialog will only be destroyed
once the owner is hungup even with the need_destroy flag set. This patch sets the
softhangup flag on the ast_channel when a SIP_BYE request is sent as a result of the
pending bye flag.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@283382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r282894 | dvossel | 2010-08-19 16:05:54 -0500 (Thu, 19 Aug 2010) | 18 lines
Merged revisions 282893 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r282893 | dvossel | 2010-08-19 16:03:24 -0500 (Thu, 19 Aug 2010) | 11 lines
tos_sip option was not being set correctly
When tos_sip is used, the tos of the sip socket is only set
correctly if the socket binding changes on a reload. If the binding
stays the same but the TOS changes, the new tos value would not take
into effect. This patch fixes that.
(closes issue #17712)
Reported by: nickb
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@282895 65c4cc65-6c06-0410-ace0-fbb531ad65f3
