The pjproject doxygen for rdata->msg_info.info says to call
pjsip_rx_data_get_info() instead of accessing the struct member directly.
You need to call the function mostly because the function will generate
the struct member value if it is not already setup.
Change-Id: I4d519385a577f3e9d9193a88125e493cf17fa799
Re-ordered the body items so Message-Account is second.
Messages-Waiting: no
Message-Account: sip:1571@<IP Removed>:5060
Voice-Message: 0/0 (0/0)
ASTERISK-26065 #close
Reported-by: Ross Beer
Change-Id: If5d35a64656eac98c2dd5e490cc0b2807bed80c3
Added notes about when you can read or write headers. Specifically
about being able to read on the inbound channel and write on an
outbound channel.
ASTERISK-26063 #close
Reported by: Private Name
Tested by: Rusty Newton
Change-Id: Ibeb64af17d1f6451028b3c29855a3f151a01d8c5
This adds a new parameter to the end of a multicast RTP dialing string.
This parameter defines the following options:
* i: Set the interface from which multicast RTP is sent
* l: Set whether multicast packets are looped back to the sender
* t: Set the TTL for multicast packets
* c: Set the codec to use for RTP
ASTERISK-26068 #close
Reported by Mark Michelson
Change-Id: I033b706b533f0aa635c342eb738e0bcefa07e219
ARI dial had been implemented using the Dial API. This made great sense
when dialing was 100% separate from bridging. However, if a channel were
to be added to a bridge during the dial attempt, there would be a
conflict between the dialing thread and the bridging thread. Each would
be attempting to read frames from the dialed channel and act on them.
The initial attempt to make the two play nice was to have the Dial API
suspend the channel in the bridge and stay in charge of the channel
until the dial was complete. The problem with this was that it was
riddled with potential race conditions. It also was not well-suited for
the case where the channel changed which bridge it was in during the
dial.
This new approach removes the use of the Dial API altogether. Instead,
the channel we are dialing is placed into an invisible ARI dialing
bridge. The bridge channel thread handles incoming frames from the
channel. If the channel is added to a real bridge, it is departed from
the invisible bridge and then added to the real bridge. Similarly, if
the channel is removed from the real bridge, it is automatically added
back to the invisible bridge if the dial attempt is still active.
This approach keeps the threading simple by always having the channel
being handled by bridge channel threads.
ASTERISK-25925
Change-Id: I7750359ddf45fcd45eaec749c5b3822de4a8ddbb
As res_pjsip_nat rewrites contact's address, only the last Via header
can contain the source address of registered endpoint.
Also Call-Id header may contain the source address of registered
endpoint.
Added "via_addr", "via_port", "call_id" to contact.
Added new fields ViaAddress, CallID to AMI event ContactStatus.
ASTERISK-26011
Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576
There are a lot of verbose messages about Endpoint and Contact status
changes if there are many dynamic endpoints.
The patch sets verbose level 2 for Endpoint status changes
and verbose level 3 for Contact status changes.
ASTERISK-26055 #close
Change-Id: Ie64e261ddbbc41bfff0f0190241152cc123fe6d7
The pjproject doxygen for rdata->msg_info.info says to call
pjsip_rx_data_get_info() instead of accessing the struct member directly.
You need to call the function mostly because the function will generate
the struct member value if it is not already setup.
Change-Id: Iafe8b01242b7deb0ebfdc36685e21374a43936d2
Recent changes to res_pjsip_outbound_publish have introduced a
race condition at shutdown where an outbound publish may be shutdown
twice. In this case the first succeeds as a result of the unpublish.
In the second invocation since it's been unpublished a task is
queued to just destroy the client. This task holds no ref to the
publish and as a result the publish may be destroyed before the
task is run, causing a crash.
This explicit destruction task now holds a reference to the publish
to ensure it remains valid.
ASTERISK-26053 #close
Change-Id: I10789b98add3e50292ee3b33a55a1d9061cec94b
The send request callback function currently assumes that it
will only ever be called on transaction state changes. This is
not always true. If our own timer callback occurs we will call
the callback with a timer event instead of a transaction state
change event. In this case the transaction on the event is
invalid and accessing it will result in a crash.
ASTERISK-26049 #close
Change-Id: I623211c8533eb73056b0250b4580b49ad4174dfc
When receiving an incoming response to a dialog-starting INVITE, we were
not matching the response to the INVITE dialog. Since we had not
recorded the to-tag to the dialog structure, the PJSIP-provided method
to find the dialog did not match.
Most of the time, this was not a problem, because there is a fall-back
that makes the response get routed to the same serializer that the
request was sent on. However, in cases where an asynchronous DNS lookup
occurs in the PJSIP core, the thread that sends the INVITE is not
actually a threadpool serializer thread. This means we are unable to
record a serializer to handle the incoming response.
Now, imagine what happens when an INVITE is sent on a non-serialized
thread, and an error response (such as a 486) arrives. The 486 ends up
getting put on some random threadpool thread. Eventually, a hangup task
gets queued on the INVITE dialog serializer. Since the 486 is being
handled on a different thread, the hangup task can execute at the same
time that the 486 is being handled. The hangup task assumes that it is
the sole owner of the INVITE session and channel, so it ends up
potentially freeing the channel and NULLing the session's channel
pointer. The thread handling the 486 can crash as a result.
This change has the incoming response match the INVITE transaction, and
then get the dialog from that transaction. It's the same method we had
been using for matching incoming CANCEL requests. By doing this, we get
the INVITE dialog and can ensure that the 486 response ends up being
handled by the same thread as the hangup, ensuring that the hangup runs
after the 486 has been completely handled.
ASTERISK-25941 #close
Reported by Javier Riveros
Change-Id: I0d4cc5d07e2a8d03e9db704d34bdef2ba60794a0
This patch adds a new feature to ARI that allows a client to download
the media associated with a stored recording. The new route is
/recordings/stored/{name}/file, and transmits the underlying binary file
using Asterisk's HTTP server's underlying file transfer facilities.
Because this REST route returns non-JSON, a few small enhancements had
to be made to the Python Swagger generation code, as well as the
mustache templates that generate the ARI bindings.
ASTERISK-26042 #close
Change-Id: I49ec5c4afdec30bb665d9c977ab423b5387e0181
This change introduces the same filtering that is done in res_sorcery_realtime
to the res_sorcery_astdb module. This allows persisted sorcery objects
that may contain unknown fields to still be read in from the AstDB
and used. This is particularly useful when switching between different
versions of Asterisk that may have introduced additional fields.
ASTERISK-26014 #close
Change-Id: Ib655130485a3ccfd635b7ed5546010ca14690fb2
Some SBCs require responses to empty SIP INFO packets
after establishing call via INVITE, if not responded to
they may drop your call after unspecified timeout of X minutes.
They are identified by having no Content-Type, check for this
and respond with 200 - OK message.
ASTERISK-24986 #close
Reported-by: Ilya Trikoz, Federico Santulli
Change-Id: Ib27e4f07151e5aef28fa587e4ead36c5b87c43e0
This change uses the newly added multi-user support for
outbound publish to publish to the specific user that an
extension state change is for.
This also extends the res_pjsip_outbound_publish support
to include the user specific From and To URI information in
the outbound publishing of extension state. Since the URI
is used when constructing the body it is important to ensure
that the correct local and remote URIs are used.
Finally the max string growths for the dialog-info+xml
body generator has been increased as through testing it has
proven to be too conservative.
ASTERISK-25965
Change-Id: I668fdf697b1e171d4c7e6f282b2e1590f8356ca1
Added a new multi_user option that when specified allows a particular
configuration to be used for multiple users. It does this by replacing
the user portion of the server uri with a dynamically created one.
Two new API calls have been added in order to make use of the new
functionality:
ast_sip_publish_user_send - Sends an outgoing publish message based on the
given user. If state for the user already exists it uses that, otherwise
it dynamically creates new outbound publishing state for the user at that
time.
ast_sip_publish_user_remove - Removes all outbound publish state objects
associated with the user. This essentially stops outbound publishing for
the user.
ASTERISK-25965 #close
Change-Id: Ib88dde024cc83c916424645d4f5bb84a0fa936cc
Many ARI applications will want to play multiple media files in a row to
a resource. The most common use case is when building long-ish IVR prompts
made up of multiple, smaller sound files. Today, that requires building a
small state machine, listening for each PlaybackFinished event, and triggering
the next sound file to play. While not especially challenging, it is tedious
work. Since requiring developers to write tedious code to do normal activities
stinks, this patch adds the ability to play back a list of media files to a
resource.
Each of the 'play' operations on supported resources (channels and bridges)
now accepts a comma delineated list of media URIs to play. A single Playback
resource is created as a handle to the entire list. The operation of playing
a list is identical to playing a single media URI, save that a new event,
PlaybackContinuing, is raised instead of a PlaybackFinished for each non-final
media URI. When the entire list is finished being played, a PlaybackFinished
event is raised.
In order to help inform applications where they are in the list playback, the
Playback resource now includes a new, optional attribute, 'next_media_uri',
that contains the next URI in the list to be played.
It's important to note the following:
- If an offset is provided to the 'play' operations, it only applies to the
first media URI, as it would be weird to skip n seconds forward in every
media resource.
- Operations that control the position of the media only affect the current
media being played. For example, once a media resource in the list
completes, a 'reverse' operation on a subsequent media resource will not
start a previously completed media resource at the appropiate offset.
- This patch does not add any new operations to control the list. Hopefully,
user feedback and/or future patches would add that if people want it.
ASTERISK-26022 #close
Change-Id: Ie1ea5356573447b8f51f2e7964915ea01792f16f
Nothing was cleaning up the registration state object when ast_sorcery_delete
was called on a registration. So, the registration was deleted from sorcery
but the state object went right on refreshing the registration (or failing
to refresh the registration) with the peer.
* Added a 'deleted' observer on registration that removes the state object.
ASTERISK-25964 #close
Reported-by Matt Jordan
Change-Id: I2db792145cdb1f72ebbf57dd9099596dbbf12c23
Although it's perfectly legal to place multiple SIP messages in the same packet,
it can cause problems because the Linux default is to enable Path MTU Discovery
which sets the Don't Fragment bit on the packets. If adding a second message to
the packet causes the MTU to be exceeded, and the destination isn't equipped to
send a FRAGMENTATION NEEDED response to a large packet, the packet will just be
dropped.
We can't specifically tell the stack to send only 1 message per packet, but we
can turn on TCP_NODELAY when we create the transport. This will at least tell
the stack to send packets as soon as possible.
ASTERISK-26005 #close
Reported-by: Ross Beer
Change-Id: I820f23227183f2416ca5e393bec510e8fe1c8fbd
When bound to an 'any' address, e.g., 0.0.0.0, PJSIP reports as its
local address the 'any' address, as opposed to the IP address we
actually received the packet on. This can cause some confusion in Homer,
as it will dutifully report what we send it.
This patch uses the PJSIP inspection routines to determine which IP
address we probably received the packet on based on the remote party's
IP address. In the event that this fails, it falls back to the IP
address natively reported by the transport.
Change-Id: I076f835d2aef489e1ee1d01595b211eb2ce62da3
The Location headers returned by:
* /bridges/{bridgeId}/play
* /bridges/{bridgeId}/record
* /channels/{channelId}/play
* /channels/{channelId}/record
Did not have the '/ari' prefix, and in the case of the 'play' resources, were
using 'playback' instead of 'playbacks.'
Change-Id: I957c58a3a1471bf477dae7c67faa1b74fcd9241c
At one point in time, it seemed like a good idea to use the Asterisk
channel name as the HEP correlation UUID. In particular, it felt like
this would be a useful identifier to tie PJSIP messages and RTCP
messages together, along with whatever other data we may eventually send
to Homer. This also had the benefit of keeping the correlation UUID
channel technology agnostic.
In practice, it isn't as useful as hoped, for two reasons:
1) The first INVITE request received doesn't have a channel. As a
result, there is always an 'odd message out', leading it to be
potentially uncorrelated in Homer.
2) Other systems sending capture packets (Kamailio) use the SIP Call-ID.
This causes RTCP information to be uncorrelated to the SIP message
traffic seen by those capture nodes.
In order to support both (in case someone is trying to use res_hep_rtcp
with a non-PJSIP channel), this patch adds a new option, uuid_type, with
two valid values - 'call-id' and 'channel'. The uuid_type option is used
by a module to determine the preferred UUID type. When available, that
source of a correlation UUID is used; when not, the more readily available
source is used.
For res_hep_pjsip:
- uuid_type = call-id: the module uses the SIP Call-ID header value
- uuid_type = channel: the module uses the channel name if available,
falling back to SIP Call-ID if not
For res_hep_rtcp:
- uuid_type = call-id: the module uses the SIP Call-ID header if the
channel type is PJSIP and we have a channel,
falling back to the Stasis event provided
channel name if not
- uuid_type = channel: the module uses the channel name
ASTERISK-25352 #close
Change-Id: Ide67e59a52d9c806e3cc0a797ea1a4b88a00122c
With the old SIP module we can use IP access controls per peer.
PJSIP module missing this feature.
This patch added next configuration Endpoint options:
"acl" - list of IP ACL section names in acl.conf
"deny" - List of IP addresses to deny access from
"permit" - List of IP addresses to permit access from
"contact_acl" - List of Contact ACL section names in acl.conf
"contact_deny" - List of Contact header addresses to deny
"contact_permit" - List of Contact header addresses to permit
This patch also better logging failed request:
add custom message instead of "No matching endpoint found"
add SIP method to logging
ASTERISK-25900
Change-Id: I456dea3909d929d413864fb347d28578415ebf02
There are two types of SIP URIs indicating a secure transport:
* sips:user@example.org
* sip:user@example.org;transport=tls
When using a sips URI, Asterisk checks incoming INVITEs and answers from
the other side for sips URIs, and rejects the packet if there are only
sip URIs. So Asterisk should only generate a sips Contact URI if the
other side supports it.
This patch makes Asterisk generate either a sip or sips Contact URI
depending on the format of the server URI.
If you want a sip URI, use:
server_uri=sip:example.org\;transport=tls
If you want a sips URI, use:
server_uri=sips:example.org
ASTERISK-25990 #close
Reported-by: Sebastian Damm
Change-Id: I5ae57d6531ce940b5fc64d5cd2673e60db0f9ba2
