This code originally worked around an issue within res_rtp_asterisk itself.
The wrong socket was being used for the STUN check for RTCP, causing the
port to be the same as RTP. This was subsequently fixed and the RTCP port
provided for the ICE candidate is correct and does not need to be incremented.
ASTERISK-23997 #close
Reported by: Badalian Vyacheslav
Patches:
plus1.diff submitted by Badalian Vyacheslav (license 5249)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@421909 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a user does not provide a port in the fromdomain setting, chan_sip will set
the fromdomainport to STANDARD_SIP_PORT (5060). The fromdomainport value will
then get used unilaterally in certain places. This causes issues with TLS,
where the default port is expected to be 5061.
This patch modifies chan_sip such that fromdomainport is only used if it is
not the standard SIP port; otherwise, the port from the SIP pvt's recorded
self IP address is used.
Review: https://reviewboard.asterisk.org/r/3893/
ASTERISK-24178 #close
Reported by: Elazar Broad
patches:
fromdomainport_fix.diff uploaded by Elazar Broad (License 5835)
........
Merged revisions 421717 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@421718 65c4cc65-6c06-0410-ace0-fbb531ad65f3
sip_subscribe_mwi_destroy calls sip_destroy on the reference counted
mwi->call. This results in the fields of mwi->call being freed, but
mwi->call itself it leaked. If other code is still using mwi->call
it can cause problems. This change uses dialog_unref instead, to
balance the ref provided by sip_alloc().
ASTERISK-24087 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/3834/
........
Merged revisions 419440 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@419441 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip have also been added to allow behavior
to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417677 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is essentially a backport of a small portion of r397526 from
ASTERISK-21981. In that patch, pass through support and format attribute
negotiation was added for Opus. Part of that included being more tolerant to
whitespace in the fmtp line of an SDP; that part of the patch is being
applied here.
As the author of the backport pointed out, in SDP, the fmtp line is allowed to
include whitespace between attributes. RFC 3267 chapter 8.3 (from 2001)
includes an example for this. This was not removed in the updated RFC 4867 in
2007.
Review: https://reviewboard.asterisk.org/r/3658
ASTERISK-23916 #close
Reported by: Alexander Traud
patches:
sdpFMTPspace_Asterisk11.patch uploaded by Alexander Traud (License 6520)
........
Merged revisions 417587 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a client takes a long time to process information received from Asterisk,
a write operation using fwrite may fail to write all information. This causes
the underlying file stream to be in an unknown state, such that the socket
must be disconnected. Unfortunately, there are two problems with this in
Asterisk's existing websocket code:
1. Periodically, during the read loop, Asterisk must write to the connected
websocket to respond to pings. As such, Asterisk maintains a reference to
the session during the loop. When ast_http_websocket_write fails, it may
cause the session to decrement its ref count, but this in and of itself
does not break the read loop. The read loop's write, on the other hand,
does not break the loop if it fails. This causes the socket to get in a
'stuck' state, preventing the client from reconnecting to the server.
2. More importantly, however, is that the fwrite in ast_http_websocket_write
fails with a large volume of data when the client takes awhile to process
the information. When it does fail, it fails writing only a portion of
the bytes. With some debugging, it was shown that this was failing in a
similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite
with a long enough timeout solved the problem.
ASTERISK-23917 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3624/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Simply establishing a TCP connection and never sending anything to the
configured HTTP port in http.conf will tie up a HTTP connection. Since
there is a maximum number of open HTTP sessions allowed at a time you can
block legitimate connections.
A similar problem exists if a HTTP request is started but never finished.
* Added http.conf session_inactivity timer option to close HTTP
connections that aren't doing anything. Defaults to 30000 ms.
* Removed the undocumented manager.conf block-sockets option. It
interferes with TCP/TLS inactivity timeouts.
* AMI and SIP TLS connections now have better authentication timeout
protection. Though I didn't remove the bizzare TLS timeout polling code
from chan_sip.
* chan_sip can now handle SSL certificate renegotiations in the middle of
a session. It couldn't do that before because the socket was non-blocking
and the SSL calls were not restarted as documented by the OpenSSL
documentation.
* Fixed an off nominal leak of the ssl struct in
handle_tcptls_connection() if the FILE stream failed to open and the SSL
certificate negotiations failed.
The patch creates a custom FILE stream handler to give the created FILE
streams inactivity timeout and timeout after a specific moment in time
capability. This approach eliminates the need for code using the FILE
stream to be redesigned to deal with the timeouts.
This patch indirectly fixes most of ASTERISK-18345 by fixing the usage of
the SSL_read/SSL_write operations.
ASTERISK-23673 #close
Reported by: Richard Mudgett
........
Merged revisions 415841 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@415854 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk started counting the session timer at INVITE while the other
end correctly started at 200. This meant that for short session-expiries
(90 seconds) combined with long ringing times (e.g. 30 seconds), asterisk
would wrongly assume that the timer was hit before the other end thought
it was time to send a session refresh. This resulted in prematurely
ended calls.
This changes the session timer to start counting first at 200 like RFC
says it should.
(Also removed a few excess NULL checks that would never hit, because if
they did, asterisk would have crashed already.)
ASTERISK-22551 #close
Reported by: i2045
Review: https://reviewboard.asterisk.org/r/3562/
........
Merged revisions 414620 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@414628 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed early exit in sip_msg_send() not destroying the message iterator.
* Made ast_msg_var_iterator_next() and ast_msg_var_iterator_destroy()
tolerant of a NULL iter parameter in case ast_msg_var_iterator_init()
fails.
* Made ast_msg_var_iterator_destroy() clean up any current message data
ref.
* Made struct ast_msg_var_iterator, ast_msg_var_iterator_init(),
ast_msg_var_iterator_next(), ast_msg_var_unref_current(), and
ast_msg_var_iterator_destroy() use iter instead of i.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@413139 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r411189, some behavior was changed which made sendrpid behavior
act in a more trusting manner by sending full user data for peers
set with private caller presence in P-Asserted-Identity headers.
Since this changed long time expected behaviors, we decided to pull
that patch when that was pointed out by the community. Instead, this
patch provides a trust_id_outbound setting which will expose the data
per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers
at all if set to 'no'. By default trust_id_outbound will be set to
'legacy' which will preserve the behavior prior to these patches.
Extra special thanks to Walter Doekes for providing advice and
feedback.
(closes issue AST-1301)
(closes issue ASTERISK-19465)
Reported by: Krzysztof Chmielewski
Review: https://reviewboard.asterisk.org/r/3447/
........
Merged revisions 412744 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Moved sip_pvt unref in ast_hangup() and handle_request_do() to the end
of the function. The unref needs to happen after the last use of the
pointer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
---
r411189 | jrose | 2014-03-26 10:50:48 -0500 (Wed, 26 Mar 2014) | 12 lines
chan_sip: Send real CallerID information with P-Assserted-Identity (RFC-3325)
Prior to this patch, the P-Asserted-Identity header would include anonymous
caller id information which seems to go against the point of the
P-Asserted-Identity header. Now the real caller ID information will be
included in this header. Also, no privacy header would be included.
This patch adds 'Privacy: id' to outgoing SIP messages that include the
P-Asserted-Identity header.
(closes issue AST-1301)
---
........
Merged revisions 412328 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
........
Merged revisions 411715 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@411716 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior too this patch, the P-Asserted-Identity header would include anonymous
caller id information which seems to go against the point of the
P-Asserted-Identity header. Now the real caller ID information will be
included in this header. Also, no privacy header would be included.
This patch adds 'Privacy: id' to outgoing SIP messages that include the
P-Asserted-Identity header.
(closes issue AST-1301)
........
Merged revisions 411189 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@411190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If update_provisional_keepalive() is called while
send_provisional_keepalive_full() is waiting on the PVT lock, then
pvt->provisional_keepalive_sched_id will be changed to a new sched_id
value by update_provisional_keepalive(), but that new sched_id then may
be overwritten with -1 by send_provisional_keepalive_full(), killing
the pvt's reference to a schedule and "leaking" the reference.
(closes issue ASTERISK-22079)
Review: https://reviewboard.asterisk.org/r/3368/
Reported by: Jamuel Starkey, Matteo, Leif Madsen, Steve Davies
Patches:
provisional_keepalive_fix.diff uploaded by Steve Davies (license 5012)
........
Merged revisions 411088 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@411089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows chan_sip to avoid creation of the channel and
consumption of associated file descriptors altogether if the inbound
request is going to be rejected anyway.
(closes issue ASTERISK-23373)
Reported by: Corey Farrell
Patches:
chan_sip-earlier-st-1.8.patch uploaded by Corey Farrell (license 5909)
chan_sip-earlier-st-11.patch uploaded by Corey Farrell (license 5909)
........
Merged revisions 410308 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@410311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a static realtime peer with qualify=yes is loaded, Asterisk will fail to
send an OPTIONS request due to the lastms being equal to 0. This results in
the peer being unable to receive calls from Asterisk because the status is
permanently UNKNOWN.
This patch allows an OPTIONS request to be sent during module load by
ignoring the lastms value on startup only.
Review: https://reviewboard.asterisk.org/r/3294/
(closes issue ASTERISK-17523)
Reported by: Maciej Krajewski
Tested by: wushumasters
patches:
realtime_fix_11.7.0.txt uploaded by Trevor Peirce (license 6112)
........
Merged revisions 410105 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@410106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix crash in ast_channel_hangupcause_set() because p->owner not checked
before calling. Regression introduced by the fix for ASTERISK-22621.
(closes issue ASTERISK-23135)
Reported by: OK
(issue ASTERISK-23323)
Reported by: Walter Doekes
........
Merged revisions 409156 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@409157 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated the code to check to see if MOH is playing on the transferor and if
so then start it on the channel that replaces it during a masquerade.
Example scenario of the problem:
Alice calls Bob and then Bob begins the attended transfer process into a queue.
Upon going on hold Alice hears music and so does Bob once he is in the queue.
Bob then transfers Alice into the queue and then music for Alice stops even
though she should be hearing it since has now replaced Bob in the queue.
The problem that was occurring is that once the channel was masqueraded the app
(queues, confbridge, etc...) had no way of knowing that the channel had just
been swapped out thus it did not start music for the present channel.
Credit to Olle Johansson for pointing me in the right direction on this issue.
(closes issue ASTERISK-19499)
Reported by: Timo Teräs
Review: https://reviewboard.asterisk.org/r/3226/
........
Merged revisions 408642 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@408643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows chan_sip to decline individual image streams over
unsupported transports in the SDP of the 200 response. Previously,
an image stream offer with RTP/AVP as the transport would cause
chan_sip to respond with a 488.
(closes issue ASTERISK-22988)
Reported by: adomjan
Original patch by: adomjan
........
Merged revisions 406170 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes typos of "transfered" instead of "transferred" in various code. Fixes incorrect gosub param help text for app_queue.
Fixes Asterisk man pages containing unquoted minus signs. Adds note about the "textsupport" option in sip.conf.sample.
(issue ASTERISK-23061)
(issue ASTERISK-23028)
(issue ASTERISK-23046)
(issue ASTERISK-23027)
(closes issue ASTERISK-23061)
(closes issue ASTERISK-23028)
(closes issue ASTERISK-23046)
(closes issue ASTERISK-23027)
Reported by: Eugene, Jeremy Laine, Denis Pantsyrev
Patches:
transferred.patch uploaded by Jeremy Laine (license 6561)
hyphen.patch uploaded by Jeremy Laine (license 6561)
sip.conf.sample.patch uploaded by Eugene (license 6360)
........
Merged revisions 405791 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-12117, an improvement to insure consistant local from tags
on outbound registrations resulted in an undesirable behavior - caused
by leftover unexpired sip_pvt dialogs (with the previous cseq number),
resulting in many uncessary REGISTER requests. Instead of significant
rework of transmit_register(), this change deletes the dialogs after a
200 OK response indiciating a successful registration, keeping the old
dialogs from interfering with normal operation.
(closes issue ASTERISK-22946)
Reported by: Stephan Eisvogel
Review: https://reviewboard.asterisk.org/r/3109/
........
Merged revisions 405433 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When performing a SIP transfer to a Park extension, if the Park fails, chan_sip
will currently not hang up either the transferer or the transfer target. This
results in the channels being orphaned with no thread to service frames,
resulting in stuck channels.
This patch immediately hangs up the two channels if a Park fails.
(closes issue ASTERISK-22834)
Reported by: rsw686
Tested by: rsw686
(closes issue ASTERISK-23047)
Reported by: Tommy Thompson
Tested by: Tommy Thomspon
Review: https://reviewboard.asterisk.org/r/3107
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For outbound register requests the tag on the From line was
updated every 20 seconds prior to a successful registration
and also once for each registration renewal. That behavior
can possibly cause the registration to be denied because of
the different tag, and is not aligned with the intention of
RFC 3261 8.1.3.5 "... request constitutes a new transaction
and SHOULD have the same value of the Call-ID, To, and From
of the previous request...". This updates chan_sip to have
a field to keep the local tag in the registration structure
and use that tag for registration requests where the callid
is also unchanged.
(closes issue ASTERISK-12117)
Reported by: Pawel Pierscionek
Review: https://reviewboard.asterisk.org/r/2988/
........
Merged revisions 402604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@402605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The presentation indicator in a callerid (e.g. set by dialplan function
Set(CALLERID(name-pres)= ...)) is not checked when SIP Dialog Info Notifies
are generated during extension monitoring. Added a check to make sure the
name and/or number presentations on the callee (remote identity) are set to
allow. If they are restricted then "anonymous" is used instead.
(closes issue AST-1175)
Reported by: Thomas Arimont
Review: https://reviewboard.asterisk.org/r/2976/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@402450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This corrects one-way audio between Asterisk and Chrome/jssip as a
result of Asterisk inserting the incorrect RTCP port into RTCP SRFLX
ICE candidates. This also exposes an ICE component enumeration to
extract further details from candidates.
(closes issue ASTERISK-21383)
Reported by: Shaun Clark
Review: https://reviewboard.asterisk.org/r/2967/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@402345 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While looking at ASTERISK-22236, Walter Doekes pointed out that when running
"sip show peers", the setting being displayed can be confusing. The display of
"N" used to mean NAT (i.e. yes). The NAT setting has gone through many
different changes resulting in the display of different characters to try and
convey what the current setting is for 'Forcerport' (A for Auto and Forcerport
is currently on, a for Auto but Forcerport is off, Y for yes, and N for no).
During the initial code review to try and clarify these settings (especially
since "N" no longer meant what it used to mean in prior versions of Asterisk),
Mark Michelson suggested using the full space available to display the settings
which helped to make the settings very clear. That was a great suggestion.
Therefore, this patch does the following:
* The column for 'Forcerport' now will show: Auto (Yes), Auto (No), Yes, or No.
* A column for the 'Comedia' setting has been added. It too will display the
setting in a non-cryptic way: Auto (Yes), Auto (No), Yes, or No.
* UPGRADE.txt has been updated to document this change.
(closes issue ASTERISK-22728)
Reported by: Walter Doekes
Tested by: Michael L. Young
Patches:
asterisk-forcerport-display-clarification_v3.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2941
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@402111 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adapts the behaviour of avpf to only impact the format of outgoing calls. For
inbound calls, both AVP and AVPF calls will be accepted regardless of the value
of avpf in the configuration.
(closes issue ASTERISK-22005)
Reported by: Torrey Searle
Patches:
optional_avpf_trunk.patch uploaded by tsearle (license 5334)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401884 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If preferred codecs included any non-audio format the code would
mistakenly add the audio format, even if it was not a joint capability
with the remote side.
(closes issue ASTERISK-21131)
Reported by: nbougues
Patches:
patch_unsupported_codec_1.8.patch uploaded by nbougues (license 6470)
........
Merged revisions 401497 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When trying to determine if a peer is behind NAT, we should not be using the
ports when comparing addresses.
This patch removes the port from being checked and just useds the addresses
now.
(closes issue ASTERISK-22729)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
asterisk-remove-using-port-for-nat-check.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2927/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A condition was added in a commit to fix ASTERISK-21374, that, if the
SIP_PAGE3_NAT_AUTO_RPORT flag was set, to then copy a peer's SIP_NAT_FORCE_RPORT
flag to the dialog. This condition should not have been there since it assumed
that if Asterisk is in an environment where NAT is involved, that the auto_* nat
settings or force_rport setting would be on in the global settings. If the nat
setting in the global setting is set to 'nat=no' and then turned on for peers
(which is not quite the recommended way, although it is allowed) this flag is
never copied to the dialog resulting in problems like, REGISTER replies going
to the wrong port.
This patch removes this conditional check and will now always use the peer's
flag which by this point in the code the checks on whether the peer is behind
NAT or not (if using auto_force_rport) have already been run.
(closes issue ASTERISK-22236)
Reported by: Filip Frank
Tested by: Michael L. Young
Patches:
asterisk-2236-always-set-rport.diff uploaded
by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2919/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@401167 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a 200 OK for an initial INVITE is received, we were doing
the right thing by ACKing and sending an immediate BYE. However,
we also were doing the wrong thing and queuing an answer frame,
thus causing the call to be answered. This would cause the call
to be hung up by the channel thread, thus resulting in a second
BYE being sent out.
In this fix, I also have set the hangupcause to be correct since
the initial BYE being sent by Asterisk had an unknown hangup
cause. I have changed to using "Bearer capabilty not available"
since the call was hung up due to an SDP offer/answer error.
(closes issue ASTERISK-22621)
reported by Kinsey Moore
........
Merged revisions 400970 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400971 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bumping the SDP version number can cause interoperability problems
since receivers of the responses will expect that a 200 SDP will
be identical to a previous 183 SDP.
(closes issue ASTERISK-21204)
reported by NITESH BANSAL
Patches:
dont-increment-session-version-in-2xx-after-183.patch uploaded by NITESH BANSAL (License #6418)
........
Merged revisions 400906 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400908 65c4cc65-6c06-0410-ace0-fbb531ad65f3
