This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Review https://reviewboard.asterisk.org/r/2580/ tried to fix the mismatch
in memory pools but had a math error determining the buffer size and
didn't address other similar memory pool mismatches.
* Effectively reverted the previous patch to go in the same direction as
trunk for the returned memory pool of ast_bt_get_symbols().
* Fixed memory leak in ast_bt_get_symbols() when BETTER_BACKTRACES is
defined.
* Fixed some formatting in ast_bt_get_symbols().
* Fixed sig_pri.c freeing memory allocated by libpri when MALLOC_DEBUG is
enabled.
* Fixed __dump_backtrace() freeing memory from ast_bt_get_symbols() when
MALLOC_DEBUG is enabled.
* Moved __dump_backtrace() because of compile issues with the utils
directory.
(closes issue ASTERISK-22221)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2778/
........
Merged revisions 397525 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@397528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The debug versions of ao2_ref() should only be used if REF_DEBUG is
enabled so nothing is written to /tmp/refs unexpectedly.
(closes issue ASTERISK-21785)
Reported by: abelbeck
Patches:
jira_asterisk_21785_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: abelbeck
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@388700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Rename astobj2 API parameter funcname to func.
* Rename astobj2 API iterator parameter to iter.
* Update some documentation for OBJ_MULTIPLE.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360827 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Global ao2 objects must always exist after initialization because there is
no access control to obtain another reference to the global object.
It is expected that module configuration could use these new API calls to
replace an active configuration parameter object with an updated
configuration parameter object.
With these new API calls, the global object could be replaced, removed, or
referenced without the risk of someone using a stale global object
pointer.
Review: https://reviewboard.asterisk.org/r/1824/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the ability to specify what kind of locking an ao2 object has when it
is allocated. The locking could be one of: MUTEX, RWLOCK, or none.
New API:
ao2_t_alloc_options()
ao2_alloc_options()
ao2_t_container_alloc_options()
ao2_container_alloc_options()
ao2_rdlock()
ao2_wrlock()
ao2_tryrdlock()
ao2_trywrlock()
The OBJ_NOLOCK and AO2_ITERATOR_DONTLOCK flags have a slight meaning
change. They no longer mean that the object is protected by an external
mechanism. They mean the lock associated with the object has already been
manually obtained by one of the ao2_lock calls. This change is necessary
for RWLOCK support since they are not reentrant. Also an operation on an
ao2 container may require promoting a read lock to a write lock by
releasing the already held read lock to re-acquire as a write lock.
Replaced API calls:
ao2_t_link_nolock()
ao2_link_nolock()
ao2_t_unlink_nolock()
ao2_unlink_nolock()
with the respective
ao2_t_link_flags()
ao2_link_flags()
ao2_t_unlink_flags()
ao2_unlink_flags()
API calls to be more flexible and to allow an anticipated enhancement to
control linking duplicate objects into a container.
The changes to format.c and format_cap.c are taking advantange of the new
ao2 locking options to simplify the use of the format capabilities
containers.
Review: https://reviewboard.asterisk.org/r/1554/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally there is a need to put all objects in one container also into
another container.
Some reasons you might need to do this:
1) You need to reconfigure a container. You would do this by creating a
new container with the new configuration and ao2_container_dup the old
container into it. Then replace the old container with the new. Then
destroy the old container.
2) You need the contents of a container to remain stable while operating
on all of the objects. You would do this by creating a cloned container
of the original with ao2_container_clone. The cloned container is a
snapshot of the objects at the time of the cloning. When done, just
destroy the cloned container.
Review: https://reviewboard.asterisk.org/r/1746/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a fairly common pattern making its way through the code base where we
put a temporary object on the stack so we can call ao2_find() with OBJ_POINTER.
The purpose is so that it can be passed into the object hash function.
However, this really seems like a hack and potentially error prone. This patch
is a first stab at approach to avoid having to do that.
It adds a new flag, OBJ_KEY, which can be used instead of OBJ_POINTER in these
situations. Then, the hash function can know whether it was given an object or
some custom data to hash.
The patch also changes some uses of ao2_find() for iax2_user and iax2_peer
objects to reflect how OBJ_KEY would be used.
So long, and thanks for all the fish.
Review: https://reviewboard.asterisk.org/r/1184/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298960 | tilghman | 2010-12-17 17:52:04 -0600 (Fri, 17 Dec 2010) | 20 lines
Merged revisions 298957 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
Review: https://reviewboard.asterisk.org/r/1055/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As pointed out by 'akshayb' on #asterisk-dev, the code here called a list of
bucket entries a 'bucket', and the entries within the bucket were called
'bucket_list'. This made the code very hard to understand without reading
all of it... so I've renamed 'bucket_list' to 'bucket_entry' to clarify the
purpose of the structure.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263208 65c4cc65-6c06-0410-ace0-fbb531ad65f3
"Bad Things" would happen if Asterisk was compiled with DEBUG_THREADS, but a
loaded module was not (or vice versa). This also immensely simplifies the
lock code, since there are no longer 2 separate versions of them.
Review: https://reviewboard.asterisk.org/r/508/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
internal_ao2_ref uses INTERNAL_OBJ which mzy report 'bad magic number', but
internal_ao2_ref continues on, causing segfault.
Although AO2_MAGIC number is checked by INTERNAL_OBJ before internal_ao2_ref is
called, A02_MAGIC is being destroyed (or a wrong pointer) by the time
internal_ao2_ref uses INTERNAL_OBJ.
internal_ao2_ref now returns -1 if INTERNAL_OBJ encouters a bad magic number.
(issue #17037)
Reported by: alecdavis
Patches:
bug17037.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253490 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ao2_iterator_destroy was not being used on the
iterator during the test. This resulted in the
container never actually being destroyed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is an issue which only affects trunk and the new ao2_callback OBJ_MULTIPLE
implementation. When both OBJ_MULTIPLE and OBJ_NODATA are passed, only the first
object is visited, regardless of what is returned by the specified callback. This
causes a problem when we are clearing a container, i.e.:
ao2_callback(container, OBJ_UNLINK | OBJ_NODATA | OBJ_MULTIPLE, NULL, NULL);
Only unlinks the first object. This patch resolves this.
(closes issue #16564)
Reported by: pj
Patches:
issue16564_20100111.diff uploaded by seanbright (license 71)
Tested by: pj, seanbright
Review: https://reviewboard.asterisk.org/r/457/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239113 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The code committed in revision 225405 was broken; instead of removing the unreference code,
the logic used to decide when to do it should have been reversed. This patch corrects the
situation, and makes reference counting work properly again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an object is being unlinked from its container *and* being returned to
the caller, we do not want to decrement the reference count after unlinking
it from the container, as the reference that the container held is what we
are returning to the caller... and if it was the only remaining reference to
the object, that could result in the object being destroyed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225405 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch finishes the implementation of OBJ_MULTIPLE in astobj2 (the
case where multiple results need to be returned; OBJ_NODATA mode
already was supported). In addition, it converts ast_channel_iterators
(only the targeted versions, not the ones that iterate over all
channels) to use this method.
During this work, I removed the 'ao2_flags' arguments to the
ast_channel_iterator constructor functions; there were no uses of that
argument yet, there is only one possible flag to pass, and it made the
iterators less 'opaque'. If at some point in the future someone really
needs an ast_channel_iterator that does not lock the container, we can
provide constructor(s) for that purpose.
Review: https://reviewboard.asterisk.org/r/379/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222152 | kpfleming | 2009-10-05 20:16:36 -0500 (Mon, 05 Oct 2009) | 20 lines
Fix ao2_iterator API to hold references to containers being iterated.
See Mantis issue for details of what prompted this change.
Additional notes:
This patch changes the ao2_iterator API in two ways: F_AO2I_DONTLOCK
has become an enum instead of a macro, with a name that fits our
naming policy; also, it is now necessary to call
ao2_iterator_destroy() on any iterator that has been
created. Currently this only releases the reference to the container
being iterated, but in the future this could also release other
resources used by the iterator, if the iterator implementation changes
to use additional resources.
(closes issue #15987)
Reported by: kpfleming
Review: https://reviewboard.asterisk.org/r/383/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222176 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
