Currently, when the first marked user enters the conference that
contains waitmarked users, a prompt is played indicating that the user
is being placed into the conference. Unfortunately, this prompt is
played to the marked user and not the waitmarked users which is not
very helpful.
This patch changes that behavior to play a prompt stating
"The conference will now begin" to the entire conference after adding
and unmuting the waitmarked users since the design of confbridge is not
conducive to playing a prompt to a subset of users in a conference in
an asynchronous manner.
(closes issue PQ-1396)
Review: https://reviewboard.asterisk.org/r/3155/
Reported by: Steve Pitts
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407857 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a DAHDI device is removed at run-time it sends the event
DAHDI_EVENT_REMOVED on each channel. This is intended to signal the
userspace program to close the respective file handle, as the driver of
the device will need all of them closed to properly clean-up.
This event has long since been handled in chan_dahdi (chan_zap at the
time). However the event that is sent on a D-Channel of a "PRI" (ISDN)
span simply gets ignored.
This commit adds handling for closing the file descriptor (and shutting
down the span, while we're at it).
It also adds a CLI command 'pri destroy span <N>' to destroy the span
and its DAHDI channels.
Backported from trunk/12.
Review: https://reviewboard.asterisk.org/r/726/
........
Merged revisions 394552 394567 from http://svn.asterisk.org/svn/asterisk/trunk
........
Merged revisions 407817 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Establishing an IAX2 call between Asterisk v1.4 and v1.8 (or later)
results in an unexpected call disconnect. The problem happens because
newer values in the enum ast_control_frame_type are not consistent between
the branch versions of Asterisk.
For example:
1) v1.4 calls v1.8 (or later) using IAX2
2) v1.8 answers and sends a connected line update control frame. (on v1.8
AST_CONTROL_CONNECTED_LINE = 22)
3) v1.4 receives the control frame as an end-of-q (on v1.4
AST_CONTROL_END_OF_Q = 22)
4) v1.4 disconnects the call once the receive queue becomes empty.
Several things are done by this patch to fix the problem and attempt to
prevent it from happening again in the future:
* Added a warning at the definition of enum ast_control_frame_type about
how to add new control frame values.
* Made block sending and receiving control frames that have no reason to
go over the wire.
* Extended the connectedline iax.conf parameter to also include the
redirecting information updates.
* Updated the connectedline iax.conf parameter documentation to include a
notice that the parameter must be "no" when the peer is an Asterisk v1.4
instance.
(closes issue AST-1302)
Review: https://reviewboard.asterisk.org/r/3174/
........
Merged revisions 407678 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407727 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes path handling for log files so that an extra / is not
appended to the file path when the path is absolute (begins with /).
This would previously result in different but functionally equivalent
paths in the output of 'logger show channels'.
........
Merged revisions 407455 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Thanks to Guillaume Martres for doing the necessary research to validate
the change.
(closes issue ASTERISK-17727)
Reported by: LN
Patches:
use_certificate_chain.patch (license #5864) patch uploaded by st
documente_certificate_chain.patch (license #6576) patch uploaded by Guillaume Martres
........
Merged revisions 407272 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The code assumed that unregistering the alias would always succeed while in
practice this is not actually true. A common case is the "reload" command itself.
If the cli_aliases.conf configuration file was changed and reload executed the
command would fail to unregister and ultimately point to freed memory.
The reload process now checks whether unregistering succeeded or not and if not
the old CLI alias is retained.
(closes issue ASTERISK-19773)
Reported by: Joel Vandal
(closes issue ASTERISK-22757)
Reported by: Gareth Blades
........
Merged revisions 407205 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407210 65c4cc65-6c06-0410-ace0-fbb531ad65f3
STACK_PEEK requires 2 parameters and LOCAL_PEEK requires 1 parameter. This
protects against situations where those parameters are blank or missing by
logging an error and returning.
(closes issue ASTERISK-23220)
Reported by: James Sharp
........
Merged revisions 407100 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The parsing for the destination of the macro/gosub uses the '^' character to
separate out context, extension, and priority. However, the logic for the
macro/gosub execution was written such that it would only do the actual
macro/gosub jump if a '^' character existed. This doesn't apply when the
macro/gosub jump occurs in a priority/priority label. This patch changes
the logic so that the parsing still occurs, but the jump will occur even
for priorities/priority labels.
(issue ASTERISK-23164)
Review: https://reviewboard.asterisk.org/r/3154
........
Merged revisions 407041 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@407074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_bind to a port reserved for another program by SELinux causes
errno == EACCES. This caused random failures when binding rtp or
udptl sockets. Treat EACCES as a non-fatal error, try next port.
(closes issue ASTERISK-23134)
Reported by: Corey Farrell
........
Merged revisions 406933 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's RADIUS module currently build against libradiusclient-ng, but this
project has been superseeded by libfreeradius-client. The API is 99% compatible
except that the header name has changed, the library name has changed, and
the configuration file location has changed.
(closes issue ASTERISK-22980)
Reported by: Jeremy Lainé
Patches:
freeradius-client.patch uploaded by sharky (license 6561)
........
Merged revisions 406801 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_rtp_instance_make_compatible(), after a failure of
channel tech call get_rtp_info() to return peer_instance,
the null pointer would be passed to ao2_ref, producing an
error that looked like a refernce counting problem but is
not. This patch corrects that and adds helpful LOG_ERROR
messages to indicate which failure path occurred.
(issue AST-1276)
Review: https://reviewboard.asterisk.org/r/3156/
........
Merged revisions 406721 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
extconfig.conf was hard-coded to not allow nested includes for some reason.
The code has been this way since a patch was merged for ASTERISK-3333 (revision
4889), which was a significant update to this code ("Merge config updates").
I can't figure out any good reason why this should be limited. This patch just
removes the limit and uses the default nesting depth limit.
Closes issue ASTERISK-17837
Review: https://reviewboard.asterisk.org/r/3159/
........
Merged revisions 406643 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_filestream object gets tacked on to a channel via
chan->timingdata. It's a reference counted object, but the reference
count isn't used when putting it on a channel. It's theoretically
possible for another thread to interfere with the channel while it's
unlocked and cause the filestream to get destroyed.
Use the astobj2 reference count to make sure that as long as this code
path is holding on the ast_filestream and passing it into the file.c
playback code, that it knows it's valid.
Bug reported by Leif Madsen.
Review: https://reviewboard.asterisk.org/r/3135/
........
Merged revisions 406566 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CEL data structures need to be protected during a configuration reload
and shutdown. Asterisk crashed during a shutdown because CEL events were
still in flight and the CEL data structures were already destroyed.
* Protected the appset and linkedids ao2 containers using the reload_lock.
As a result appset, linkedids, and held objects don't need a lock.
* Added NULL checks before use of the appset and linkedids ao2 containers
in case the CEL module is already shutdown.
* Fixed overloading of the linkedids held objects reference count. During
shutdown any held objects would be leaked.
* Fixed memory leak of linkedids held objects if the LINKEDID_END is not
being tracked. The objects in the linkedids container were not removed if
the LINKEDID_END event is not used.
* Added access protection to the appset container during the CLI "cel show
status" command.
* Made CEL config reload not set defaults if the cel.conf file is invalid.
(closes issue AST-1253)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3127/
........
Merged revisions 406417 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made register atexit shutdown routine only once in __init_manager().
* Fixed some initial load failure conditions in __init_manager().
* Made reset options to defaults on reload when the reload will actually
happen.
* Removed unnecessary container traversals of the white/black filters
during manager_free_user().
* ast_free() does not need a NULL check before calling.
........
Merged revisions 406359 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally, the manager module would get an "INTERNAL_OBJ: bad magic
number" error on a "core restart gracefully" command if an AMI connection
is established.
* Added ao2_global_obj protection to the sessions global container.
* Fixed the order of unreferencing a session object in session_destroy().
* Removed unnecessary container traversals of the white/black filters
during session_destructor().
(closes issue AST-1242)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3144/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_build_timing, initialize the timezone value to NULL
in order to avoid deferencing an uninitialized value later
when calling ast_destroy_timing. The timezone value could
be uninitialized if ast_build_timing were to fail due to a
zero length time string.
(closes issue ASTERISK-22861)
Reported by: Sebastian Murray-Roberts
Review: https://reviewboard.asterisk.org/r/3134/
Patches:
ast_build_timing-initialize-timezone.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 406241 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Confbridge AMI and CLI commands for mute, unmute, and setting the
single video source can accept channel prefixes in lieu of a full
channel name, but documentation states only that it is required and is
a channel name. This corrects the documentation.
(closes issue PQ-1397)
Reported by: Steve Pitts
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows chan_sip to decline individual image streams over
unsupported transports in the SDP of the 200 response. Previously,
an image stream offer with RTP/AVP as the transport would cause
chan_sip to respond with a 488.
(closes issue ASTERISK-22988)
Reported by: adomjan
Original patch by: adomjan
........
Merged revisions 406170 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This restricts direct usage of global oseq so that all accesses are
locked and threads are not racing to get oseq values that they did not
claim.
This also fixes a build error in res_pktccops under dev mode.
(closes issue ASTERISK-23100)
Reported by: adomjan
Patch by: adomjan
........
Merged revisions 406037 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@406038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes typos of "transfered" instead of "transferred" in various code. Fixes incorrect gosub param help text for app_queue.
Fixes Asterisk man pages containing unquoted minus signs. Adds note about the "textsupport" option in sip.conf.sample.
(issue ASTERISK-23061)
(issue ASTERISK-23028)
(issue ASTERISK-23046)
(issue ASTERISK-23027)
(closes issue ASTERISK-23061)
(closes issue ASTERISK-23028)
(closes issue ASTERISK-23046)
(closes issue ASTERISK-23027)
Reported by: Eugene, Jeremy Laine, Denis Pantsyrev
Patches:
transferred.patch uploaded by Jeremy Laine (license 6561)
hyphen.patch uploaded by Jeremy Laine (license 6561)
sip.conf.sample.patch uploaded by Eugene (license 6360)
........
Merged revisions 405791 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
action_originate responds to the remote system with an error when cap==NULL,
but doesn't return (abort the originate). Patched to return.
(closes issue ASTERISK-23034)
Reported by: Corey Farrell
Patches:
ASTERISK-23034.patch uploaded by coreyfarrell (license 5909)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405745 65c4cc65-6c06-0410-ace0-fbb531ad65f3
According to the new standard for V.27 and V.32 they are able to transmit
at a bit rate of 4,800 or 9,600. The check_mode_rate function needed to be
updated to reflect this. Also, because of this change the default 'minrate'
value was updated to be 4800.
(closes issue ASTERISK-22790)
Reported by: Paolo Compagnini
Patches:
res_fax.txt uploaded by looserouting (license 6548)
........
Merged revisions 405656 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-12117, an improvement to insure consistant local from tags
on outbound registrations resulted in an undesirable behavior - caused
by leftover unexpired sip_pvt dialogs (with the previous cseq number),
resulting in many uncessary REGISTER requests. Instead of significant
rework of transmit_register(), this change deletes the dialogs after a
200 OK response indiciating a successful registration, keeping the old
dialogs from interfering with normal operation.
(closes issue ASTERISK-22946)
Reported by: Stephan Eisvogel
Review: https://reviewboard.asterisk.org/r/3109/
........
Merged revisions 405433 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405431 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When performing a SIP transfer to a Park extension, if the Park fails, chan_sip
will currently not hang up either the transferer or the transfer target. This
results in the channels being orphaned with no thread to service frames,
resulting in stuck channels.
This patch immediately hangs up the two channels if a Park fails.
(closes issue ASTERISK-22834)
Reported by: rsw686
Tested by: rsw686
(closes issue ASTERISK-23047)
Reported by: Tommy Thompson
Tested by: Tommy Thomspon
Review: https://reviewboard.asterisk.org/r/3107
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A 'make distclean' is equivalent to 'make dist-clean' in the top most Makefile.
This patch updates the res/Makefile to recognize both distclean and dist-clean.
Note that this is needed for removing build.mak, which can run into problems
if the source file of Asterisk or its path is changed after build.mak is
generated.
(issue ASTERISK-22480)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405362 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_rtp_ice_start if the ice session create check list failed, start check
was never initiated and ice_started was never set to true. Upon re-entering
the function (for instance, [un]hold) it would try to create the check list
again with duplicate remote candidates.
Fixed so that if the create check list fails the necessary data structures
are properly re-initialized for any subsequent retries.
Note, it was decided to not stop ice support (by calling ast_rtp_ice_stop) on a
check list failure because it possible things might still work. However, a
debug message was added to help with any future troubleshooting.
(closes issue ASTERISK-22911)
Reported by: Vytis Valentinavičius
Patches:
works_on_my_machine.patch uploaded by xytis (license 6558)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When waitmarked users join a ConfBridge, the conference state is transitioned
from EMPTY -> INACTIVE. In this state, the users are maintined in a waiting
users list. When a marked user joins, the ConfBridge conference transitions
from INACTIVE -> MULTI_MARKED, and all users are put onto the active list of
users. This process works correctly.
When the marked user leaves, if they are the last marked user, the MULTI_MARKED
state does the following:
(1) It plays back a message to the bridge stating that the leader has left the
conference. This requires an unlocking of the bridge.
(2) It moves waitmarked users back to the waiting list
(3) It transitions to the appropriate state: in this case, INACTIVE
However, because it plays the prompt back to the bridge before moving the users
and before finishing the state transition, this creates a race condition: with
the bridge unlocked, waitmarked users who leave the conference (or are kicked
from it) can cause a state transition of the bridge to another state before
the conference is transitioned to the INACTIVE state. This causes the state
machine to get a bit wonky, often leading to a crash when the MULTI_MARKED state
attempts to conclude its processing.
This patch fixes this problem:
(1) It prevents kicked users from being kicked again. That's just a nicety.
(2) More importantly, it fixes the race condition by only playing the prompt
once the state has transitioned correctly to INACTIVE. If waitmarked users
sneak out during the prompt being played, no harm no foul.
Review: https://reviewboard.asterisk.org/r/3108/
Note that the patch committed here is essentially the same as uploaded by
Simon Moxon on ASTERISK-22740, with the addition of the double kick prevention.
(closes issue AST-1258)
Reported by: Steve Pitts
(closes issue ASTERISK-22740)
Reported by: Simon Moxon
patches:
ASTERISK-22740.diff uploaded by Simon Moxon (license 6546)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@405215 65c4cc65-6c06-0410-ace0-fbb531ad65f3
