Announcer channels were not being destroyed because the
stasis_app_control structure that referenced them was not being
destroyed. The control structure was not being destroyed because it was
not being unlinked from its container. It was not being unlinked from
its container because the after bridge callback for the announcer
channel was not being run. The after bridge callback was not being run
because the after bridge datastore was not being removed from the
channel on destruction. The channel was not being destroyed because the
hangup that used to destroy the channel was now only reducing the
reference count to one. The reference count of the channel was only
being reduced to one because the stasis_app_control structure was
holding the final reference...
The control structure used to not keep a reference to the channel, so
that loop described above did not happen.
The solution is to manually remove the control structure from its
container when the playback on a bridge is complete.
ASTERISK-26083 #close
Reported by Joshua Colp
Change-Id: I0ddc0f64484ea0016245800b409b567dfe85cfb4
* In unload_module(), reordered destroying things to minimize the window
that the global transports container could be used by other threads on
shutdown. When shutting down you need to stop things in the opposite
order of creation.
* Put the global transports container into an AO2_GLOBAL_OBJ_STATIC to
eliminate the crash potential by other threads using the container on
shutdown.
* Made struct monitored_transport.sip_received not use
ast_atomic_fetchadd_int() since it is used as a boolean value that is only
set TRUE. It was previously incremented for every received SIP message
and could theoretically overflow.
* In monitored_transport_state_callback(), allocated the monitored
transport object without a lock since the lock was unused.
* In keepalive_global_loaded(), removed releasing the transports container
if the keepalive_thread could not be started. I set it up to be tried
again if the user reloads the configuration.
Change-Id: I8d12d16ef564290fa6d25a32334bb5ce8fdf87ff
A crash can occur in res_hep_pjsip or res_hep_rtcp if res_hep has not
loaded and does not have a configuration file. Previously when this
occurred, checks were put in to see if the configuration was loaded
successfully. While this is a good idea - and has been added to the
offending function in res_hep - the reality is res_hep_pjsip and
res_hep_rtcp have no business running if res_hep isn't also running.
As such, this patch also adds a function to res_hep that returns whether
or not it successfully loaded. Oddly enough, ast_module_check returns
"everything is peachy" even if a module declined its load - so it cannot
be solely relied on. res_hep_pjsip and res_hep_rtcp now also check this
function to see if they should continue to load; if it fails, they
decline their load as well.
ASTERISK-26096 #close
Change-Id: I007e535fcc2e51c2ca48534f48c5fc2ac38935ea
This patch fixes a race condition processing received REGISTER requests
and their retransmissions caused by REGISTER requests being processed by
two threads. The "sip_transaction Unable to register REGISTER transaction
(key exists)" message is a notable symptom of this issue.
This issue was more likely to happen before the pjsip/distributor
serializers were created. Instead of steps one and two below placing the
REGISTER messages into the same pjsip/distributor they were placed in
random pjsip/default serializers.
1) REGISTER requests come in and get placed on the pjsip/distributor
serializer.
2) Before the first request is processed a retransmission comes in and is
placed on the same pjsip/distributor serializer.
3) The first request goes up the pjsip stack and is then shunted off to
the pjsip/aor/<aor> serializer.
4) Before the first request is completed processing in the pjsip/aor/<aor>
serializer, the second request goes up the pjsip stack and is also shunted
off to the pjsip/aor/<aor> serializer.
5) The first request completes processing and sends out its response.
6) The second request completes processing and tries to send out its
response but pjlib complains that the REGISTER transaction key already
exists.
7) Sadness ensues.
* The race is eliminated by removing the pjsip/aor/<aor> serializer and
continuing the processing in the pjsip/distributor serializer. Now any
retransmissions queued in the pjsip/distributor serializer will be
processed after the first message is completely processed.
ASTERISK-26088 #close
Reported by: Richard Mudgett
Change-Id: I842d714346088bf717ea27437f1dd85bff0bab5a
Sorcery creates taskprocessors for object types to process object observer
callbacks. An API call is needed to be able to set the congestion levels
of these taskprocessors for selected object types.
* Updated PJSIP's contact and contact_status sorcery object type observer
default congestion levels based upon stress testing. Increased the
congestion levels to reduce the potential for bursty register/unregister
and subscribe/unsubscribe activity from triggering the taskprocessor
overload alert.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I4542e83b556f0714009bfeff89505c801f1218c6
When taskprocessors get backed up, there is a good chance that we are
being overloaded and need to defer adding new work to the system.
* Implemented a high/low water alert mechanism for modules to check if the
system is being overloaded and take appropriate action. When a
taskprocessor is created it has default congestion levels set. A
taskprocessor can later have those congestion levels altered for specific
needs if stress testing shows that the taskprocessor is a symptom of
overloading or needs to handle bursty activity without triggering an
overload alert.
* Add CLI "core show taskprocessor" low/high water columns.
* Fixed __allocate_taskprocessor() to not use RAII_VAR(). RAII_VAR() was
never a good thing to use when creating a taskprocessor because of the
nature of how its references needed to be cleaned up on a partial
creation.
* Made res_pjsip's distributor check if the taskprocessor overload alert
is active before placing a message representing brand new work onto a
distributor serializer.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I182f1be603529cd665958661c4c05ff9901825fa
We must continue using the serializer that the original INVITE came in on
for the dialog. There may be retransmissions already enqueued in the
original serializer that can result in reentrancy and message sequencing
problems.
Outgoing call legs create the pjsip/outsess/<endpoint> serializers for
their dialogs.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I24d7948749c582b8045d5389ba3f6588508adbbc
* Resolves potential reentrancy problems if system restarted in the middle
of subscription message transactions.
* Fixes memory leak recreating persistent subscriptions when the
subscription resource tree could not be created.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I71e34d7ae8ed35a694f1030e820e2548c48697be
We must continue using the serializer that the original SUBSCRIBE came in
on for the dialog. There may be retransmissions already enqueued in the
original serializer that can result in reentrancy and message sequencing
problems. The "sip_transaction Unable to register SUBSCRIBE transaction
(key exists)" message is a notable symptom of this issue.
Outgoing subscriptions still create the pjsip/pubsub/<endpoint>
serializers for their dialogs.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I18b00bb74a56747b2c8c29543a82440b110bf0b0
Incoming messages that are not part of a dialog or a recognized response
to one of our requests need to be sent to a consistent serializer. Under
load we may be queueing retransmissions before we can process the original
message. We don't need to throw these messages onto random serializers
and cause reentrancy and message sequencing problems.
* Created a pool of pjsip/distributor serializers that get picked by
hashing the call-id and remote tag strings of the received messages.
* Made ast_sip_destroy_distributor() destroy items in the reverse order of
creation.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I2ce769389fc060d9f379977f559026fbcb632407
We should not be processing any incoming messages until we are fully
booted. We may not have dialplan or other needed configuration loaded
yet.
ASTERISK-26089 #close
Reported by: Scott Griepentrog
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I584aefb4f34b885a8927e1f13a2c64babd606264
Testing has shown that our usage of UnixODBC is problematic
due to bugs within UnixODBC itself as well as the heavy weight
cost of connecting and disconnecting database connections, even
when pooling is enabled.
For users of UnixODBC 2.3.1 and earlier crashes would occur due
to insufficient protection of the disconnect operation. This was
fixed in UnixODBC 2.3.2 and above.
For users of UnixODBC 2.3.3 and higher a slow-down would occur
under heavy database use due to repeated connection establishment.
A regression is present where on each connection the database
configuration is cached again, with the cache growing out of
control.
The connection pool implementation present in this change helps
to mitigate these issues by reducing how much we connect and
disconnect database connections. We also solve the issue of
crashes under UnixODBC 2.3.1 by defaulting the maximum number of
connections to 1, returning us to the previous working behavior.
For users who may have a fixed version the maximum concurrent
connection limit can be increased helping with performance.
The connection pool works by keeping a list of active connections.
If the connection limit has not been reached a new connection is
established. If the connection limit has been reached then the
request waits until a connection becomes available before
continuing.
ASTERISK-26074 #close
ASTERISK-26054 #close
Change-Id: I6774bf4bac49a0b30242c76a09c403d2e856ecff
Since libSRTP 1.5, its Random Number Generator (RNG) is not maintained anymore.
Therefore, the symbol RAND_bytes is used instead of crypto_get_random.
ASTERISK-24436 #close
Change-Id: Iea0bae4d4e3c9aa0926ea442b6484b5159789d96
If you create a local channel and don't specify an originator channel
to take capabilities from, we automatically add all audio formats to
the new channel's capabilities. When we try to make the channel
compatible with another, the "best format" functions pick the best
format available, which in this case will be slin192. While this is
great for preserving quality, it's the worst for performance and
overkill for the vast majority of applications.
In the absense of any other information, adding all formats is the
correct thing to do and it's not always possible to supply an
originator so a new parameter 'formats' has been added to the channel
create/originate functions. It's just a comma separated list of formats
to make availalble for the channel. Example: "ulaw,slin,slin16".
'formats' and 'originator' are mutually exclusive.
To facilitate determination of format names, the format name has been
added to "core show codecs".
ASTERISK-26070 #close
Change-Id: I091b23ecd41c1b4128d85028209772ee139f604b
The pjproject doxygen for rdata->msg_info.info says to call
pjsip_rx_data_get_info() instead of accessing the struct member directly.
You need to call the function mostly because the function will generate
the struct member value if it is not already setup.
Change-Id: I4d519385a577f3e9d9193a88125e493cf17fa799
Re-ordered the body items so Message-Account is second.
Messages-Waiting: no
Message-Account: sip:1571@<IP Removed>:5060
Voice-Message: 0/0 (0/0)
ASTERISK-26065 #close
Reported-by: Ross Beer
Change-Id: If5d35a64656eac98c2dd5e490cc0b2807bed80c3
Added notes about when you can read or write headers. Specifically
about being able to read on the inbound channel and write on an
outbound channel.
ASTERISK-26063 #close
Reported by: Private Name
Tested by: Rusty Newton
Change-Id: Ibeb64af17d1f6451028b3c29855a3f151a01d8c5
The pjproject doxygen for rdata->msg_info.info says to call
pjsip_rx_data_get_info() instead of accessing the struct member directly.
You need to call the function mostly because the function will generate
the struct member value if it is not already setup.
Change-Id: Iafe8b01242b7deb0ebfdc36685e21374a43936d2
As res_pjsip_nat rewrites contact's address, only the last Via header
can contain the source address of registered endpoint.
Also Call-Id header may contain the source address of registered
endpoint.
Added "via_addr", "via_port", "call_id" to contact.
Added new fields ViaAddress, CallID to AMI event ContactStatus.
ASTERISK-26011
Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576
There are a lot of verbose messages about Endpoint and Contact status
changes if there are many dynamic endpoints.
The patch sets verbose level 2 for Endpoint status changes
and verbose level 3 for Contact status changes.
ASTERISK-26055 #close
Change-Id: Ie64e261ddbbc41bfff0f0190241152cc123fe6d7
When receiving an incoming response to a dialog-starting INVITE, we were
not matching the response to the INVITE dialog. Since we had not
recorded the to-tag to the dialog structure, the PJSIP-provided method
to find the dialog did not match.
Most of the time, this was not a problem, because there is a fall-back
that makes the response get routed to the same serializer that the
request was sent on. However, in cases where an asynchronous DNS lookup
occurs in the PJSIP core, the thread that sends the INVITE is not
actually a threadpool serializer thread. This means we are unable to
record a serializer to handle the incoming response.
Now, imagine what happens when an INVITE is sent on a non-serialized
thread, and an error response (such as a 486) arrives. The 486 ends up
getting put on some random threadpool thread. Eventually, a hangup task
gets queued on the INVITE dialog serializer. Since the 486 is being
handled on a different thread, the hangup task can execute at the same
time that the 486 is being handled. The hangup task assumes that it is
the sole owner of the INVITE session and channel, so it ends up
potentially freeing the channel and NULLing the session's channel
pointer. The thread handling the 486 can crash as a result.
This change has the incoming response match the INVITE transaction, and
then get the dialog from that transaction. It's the same method we had
been using for matching incoming CANCEL requests. By doing this, we get
the INVITE dialog and can ensure that the 486 response ends up being
handled by the same thread as the hangup, ensuring that the hangup runs
after the 486 has been completely handled.
ASTERISK-25941 #close
Reported by Javier Riveros
Change-Id: I0d4cc5d07e2a8d03e9db704d34bdef2ba60794a0
This change introduces the same filtering that is done in res_sorcery_realtime
to the res_sorcery_astdb module. This allows persisted sorcery objects
that may contain unknown fields to still be read in from the AstDB
and used. This is particularly useful when switching between different
versions of Asterisk that may have introduced additional fields.
ASTERISK-26014 #close
Change-Id: Ib655130485a3ccfd635b7ed5546010ca14690fb2
Some SBCs require responses to empty SIP INFO packets
after establishing call via INVITE, if not responded to
they may drop your call after unspecified timeout of X minutes.
They are identified by having no Content-Type, check for this
and respond with 200 - OK message.
ASTERISK-24986 #close
Reported-by: Ilya Trikoz, Federico Santulli
Change-Id: Ib27e4f07151e5aef28fa587e4ead36c5b87c43e0
