On some platforms, you decide to go for one specific version of Lua, for
example in OpenBSD. On other platforms, you are able to install several versions
side-by-side, for example in Ubuntu and Fedora. Asterisk already works with
Lua 5.3. Asterisk failed to detect Lua 5.3 on those platforms which allow
several versions.
ASTERISK-27592
Change-Id: If7a4b395d844a464e9a1f4f626c5bff4ee67eed8
When an older GCC version is called with a too new warning option, GCC exited
with an error and Asterisk was not built. Therefore, the configure script tests
the installed compiler whether it supports that warning option. If not, Asterisk
does not pass it to the installed compiler. However, some compilers (like clang)
do not exit (error) but give just a warning in such a case. Because the compiler
did not exit, Asterisk passed the unknown-warning option.
ASTERISK-27560
Change-Id: Ia9b7747f649b27ff5e9f75c3db3fee4fe7a29621
The current configure script requires that tool when libpt-dev is installed.
libpt-dev was installed by libopenh323-dev, bacause you wanted to go for H.323
based channel drivers.
ASTERISK-25329
Change-Id: I9c6ab78b7246c21536e1d252dcbffe682f63f83d
The `pwd` parameter to AC_CONFIG_AUX_DIR is unnecessary, the default
value is $srcdir.
Additionally remove the AC_REVISION call. It only added a comment and
is pointless without SVN tag replacements.
Change-Id: I99299a3217f095bddcb2edefb3b9af0ab147bc29
OSX does not support 'readlink -f' or 'sed -r'. Replace readlink with
the GNU make macro 'realpath'. Replace sed with grep in one place, cut
in the other.
ASTERISK-27332
Change-Id: I5d34ecca905384decb22ead45c913ae5e8aff748
This change causes the configure script to fail if the C compiler does
not support both function attributes constructor and destructor. These
were already required as modules cannot function without these attributes
and Asterisk requires modules.
This also has AST_GCC_ATTRIBUTE set a variable
ax_cv_have_func_attribute_$1. This is the same variable name used by
autoconf-archive's AX_GCC_FUNC_ATTRIBUTE, used for the same purpose.
Change-Id: Id68e8a1447f2a6d707c54b56350e7bfdb33fb663
This check is being added to make it easier for end-users of third party
open source Opus modules. This was removed by ASTERISK-26426 but only
the module needed to be removed.
Change-Id: I62b9cd0c4fa8a77596ab0e042948a643a1152677
The configure option to disable XML documentation does not currently
work. This patch makes it effective, but also causes an ABI change by
removing the ast_xmldoc_* symbols. Disabling xmldoc also prevents docs
from being automatically generated, but they can still be manually
generated with 'make doc/core-en_US.xml'.
ASTERISK-26639
Change-Id: Ifac562340c09f80c83e0203de098fcac93bf8c44
At some point in time in the history of Corosync (certainly within the
2.x branch), the corosync_cfg_state_track function was removed.
Unfortunately, the cfg library is only linked if this function is
present. Without the cfg library being linked to res_corosync, loading
of res_corosync will fail.
This patch makes it so that detecting corosync's core libraries,
determined by the COROSYNC external library checks, links both the cpg
and cfg libraries with res_corosync.
Change-Id: I674e9e1c8fea11c3bf81154aaa7c1fd43f945465
To make building without an internet connection easier, a new
./configure option '--with-download-cache' was added that sets
the cache for externals (like pjproject, the codecs and the DPMA),
AND the sounds files. It can also be specified as an environment
variable named "AST_DOWNLOAD_CACHE". The existing
'--with-sounds-cache' option / SOUNDS_CACHE_DIR env variable and
'--with-externals-cache' option / EXTERNALS_CACHE_DIR env variable
remain and if specified, will override '--with-downloads-cache'.
Change-Id: I5c3cf15ee61e8fe191b52732303e969854f8d861
Support building the Asterisk httpd with version 3.0 of gmime as
well as earlier versions of that library.
ASTERISK-27173
Change-Id: I7e13dd05a3083ccb0df2dabf83110223f6a9fa8f
There wasn't any good way to pass options like --host or --build
down to the pjproject configure which makes cross-compiling difficult.
* Added a new PJPROJECT_CONFIGURE_OPTS environment variable which
can be used to pass arbitrary options to pjproject configure.
* Automatically set the pjproject configure --host and --build
options to match those supplied for the asterisk configure.
ASTERISK-27097 #close
Reported-by: Kinsey Moore
Change-Id: I5fa776e110262851173002a26ffe1172e4c35b2e
Some systems (like macOS) require BIND_8_COMPAT to be defined so that
the nameser libraries are, well, BIND8 compatible.
Change-Id: If79fc27a64f90de1835b5aa3aadfa9be22bd16b0
The primary win of switching to eventfd when possible is that it only
uses a single file descriptor while pipe() will use two. This means for
each bridge channel we're reducing the number of required file
descriptors by 1, and - if you're using timerfd - we also now have 1
less file descriptor per Asterisk channel.
The API is not ideal (passing int arrays), but this is the cleanest
approach I could come up with to maintain API/ABI.
I've also removed what I believe to be an erroneous code block that
checked the non-blocking flag on the pipe ends for each read. If the
file descriptor is 'losing' its non-blocking mode, it is because of a
bug somewhere else in our code.
In my testing I haven't seen any measurable difference in performance.
Change-Id: Iff0fb1573e7f7a187d5211ddc60aa8f3da3edb1d
0035-r5572-svn-backport-dialog-transaction-deadlock.patch
0036-r5573-svn-backport-ua-pjsua-transaction-deadlock.patch
0037-r5576-svn-backport-session-timer-crash.patch
Also removed the progress bar from wget download to stdout.
ASTERISK-26905 #close
Reported-by: Ross Beer
Change-Id: I268fb3cf71a3bb24283ff0d24bd8b03239d81256
If DESTDIR is set, don't call ldconfig. Assume that DESTDIR is used to
create a binary archive. The ldconfig call should be delegated to the
archive postinst script. This fixes the case where fakeroot wraps 'make
install' causing $EUID to be 0 even though it doesn't have permission to
call ldconfig.
The previous logic in configure.ac to detect and correct libdir
has been removed as it was not completely accurate. CentOS 64-bit
users should again specifiy --libdir=/usr/lib64 when configuring
to prevent install to /usr/lib.
Updated Makefile:check-old-libdir to check for orphans in
lib64 when installing to lib as well as orphans in lib when installing
to lib64.
Updated Makefile and main/Makefile uninstall targets to remove the
orphans using the new logic.
ASTERISK-26705
Change-Id: I51739d4a03e60bff38be719b8d2ead0007afdd51
In some scenarios, such as when there may not be a terminal (such as
inside a Docker container), curl will apparently direct the progress bar
to stdout. This can cause extra data to be appended to a file curl'd
down to stdout, resulting in md5 verification failures.
This patch removes the progress bar, and tells curl to download the file
silently.
ASTERISK-26872 #close
Change-Id: Ie860b020f627d4372b3e7ce9453de5faafeebe6c
On some platforms a multiarch approach is used for libraries.
The build system does not take this into account and still
places libraries into the lib directory if no --libdir is
specified to configure. On initial startup this results in
libasteriskssl.so not being found, as it is not in the multiarch
lib directory. To make matters worse, options were being passed
to ldconfig on both Linux and FreeBSD that actually prevented
the rebuild of the cache.
* Fedora has a /usr/share/config.site that automatically tells
autoconf to use /usr/lib64 but CentOS does not. This logic was
copied to configure.ac and modified so systems like Ubuntu,
which still use /usr/lib for 64-bit systems, aren't affected.
Now that we have them in the correct directory...
In order for the system loader to find libasteriskssl and
libasteriskpj, one of 3 things has to happen...
- The linker cache must be rebuilt including the directory
where the libasterisk* libraries were installed. Only root
can rebuild the cache. This was busted.
- We have to link the asterisk binary with an rpath pointing
to the directrory where the libasterisk* libraries were
installed. This makes things very complicated and will happen
over the collective dead bodies of everyone who's had to
package a distribution with an rpath.
- Finally, you can start asterisk with LD_LIBRARY_PATH set to the
directrory where the libasterisk* libraries were installed.
There are no other options. So...
* The invokation of ldconfig has been moved from main/Makefile
to ASTTOPDIR/Makefile, the options have been removed, and
DESTDIR/ASTLIBDIR appended. If you aren't root, you will be
warned after the "Asterisk Installation Compete" banner that
you must re-run 'make install' as root, manually run
'ldconfig DESTDIR/ASTLIBDIR' as root, or run asterisk with
LD_LIBRARY_PATH.
ASTERISK-26705
Change-Id: I2a64b7c33a7d3e9bde20f47e3d3ab771977af982
This patch fixes 2 original issues and more that those 2 exposed.
* When we send a NOTIFY, and the client either doesn't respond or
responds with a non OK, pjproject only calls our
pubsub_on_evsub_state callback, no others. Since
pubsub_on_evsub_state (which does the sub_tree cleanup) does not
expect to be called back without the other callbacks being called
first, it just returns leaving the sub_tree orphaned. Now
pubsub_on_evsub_state checks the event for PJSIP_EVENT_TSX_STATE
which is what pjproject will set to tell us that it was the
transaction that timed out or failed and not the subscription
itself timing our or being terminated by the client. If is
TSX_STATE, pubsub_on_evsub_state now does the proper cleanup
regardless of the state of the subscription.
* When a client renews a subscription, we don't update the
persisted subscription with the new expires timestamp. This causes
subscription_persistence_recreate to prune the subscription if/when
asterisk restarts. Now, pubsub_on_rx_refresh calls
subscription_persistence_update to apply the new expires timestamp.
This exposed other issues however...
* When creating a dialog from rdata (which sub_persistence_recreate
does from the packet buffer) there must NOT be a tag on the To
header (which there will be when a client refreshes a
subscription). If there is one, pjsip_dlg_create_uas will fail.
To address this, subscription_persistence_update now accepts a flag
that indicates that the original packet buffer must not be updated.
New subscribes don't set the flag and renews do. This makes sure
that when the rdata is recreated on asterisk startup, it's done
from the original subscribe packet which won't have the tag on To.
* When creating a dialog from rdata, we were setting the dialog's
remote (SUBSCRIBE) cseq to be the same as the local (NOTIFY) cseq.
When the client tried to resubscribe after a restart with the
correct cseq, we'd reject the request with an Invalid CSeq error.
* The acts of creating a dialog and evsub by themselves when
recreating a subscription does NOT restart pjproject's subscription
timer. The result was that even if we did correctly recreate the
subscription, we never removed it if the client happened to go away
or send a non-OK response to a NOTIFY. However, there is no
pjproject function exposed to just set the timer on an evsub that
wasn't created by an incoming subscribe request. To address this,
we create our own timer using ast_sip_schedule_task. This timer is
used only for re-establishing subscriptions after a restart.
An earlier approach was to add support for setting pjproject's
timer (via a pjproject patch) and while that patch is still included
here, we don't use that call at the moment.
While addressing these issues, additional debugging was added and
some existing messages made more useful. A few formatting changes
were also made to 'pjsip show scheduled tasks' to make displaying
the subscription timers a little more friendly.
ASTERISK-26696
ASTERISK-26756
Change-Id: I8c605fc1e3923f466a74db087d5ab6f90abce68e
The AC_ARG_WITH macro's shell variable is withval; not enableval. Purely
coincidentally, the option would work when --enable-dev-mode is given.
Also fixed a portability problem with bootstrap.sh, since -printf is not
a portable option for find.
Change-Id: I0f0e5b1a934b5af5737713834361e9c95b96b376
There are quite a few odd GNU/Linux platforms. Just call all of them
linux-gnu.
Specifically this fixes building the Debian platforms mips64el and x32.
And maybe also others.
ASTERISK-26546 #close
Change-Id: I06ec4bd7f0ee1c84b6b24d81538223b07c4174b1
A while back, a master-only change was made to check for librt which
should probably have been cherry-picked to 13 at that time. Sometime
between then and now, part of that change did make it into 13 but it
was incomplete and non-functional. This patch backports the rest
of the librt check and allows the link of libasteriskpj to use the
results.
Change-Id: I1424008fd8c90f389dda53162ec4a340b253a3c1
The download process now has a timeout which will cause wget to retry
if it stops retrieving data for 5 seconds and fetch and curl to timeout
if the whole retrieval take smore than 30 seconds.
If the tarball retrieval works, the MD5SUM file is retrieved from
the downloads site and the md5 checksum is verified.
If either the tarball retrieval or MD5SUM retrieval fails, or the
checksums don't match, the entire process is retried once. If it
fails again, any incomplete tarball is deleted.
.DELETE_ON_ERROR: was also added to the Makefile. Not only does
this delete the tarball on failure, it till also delete corrupted
library files from the pjproject source directory should they
fail to build correctly.
Tested all the way back to FreeBSD 9, CentOS 6, Debian 6 and
Ubuntu 14.
Change-Id: Iea7d33b96a31622ab1b6e54baebaf271959514e1
Responding to authentication challenges leaks PJSIP memory pools.
The leak was introduced with a pjproject 2.5.5 API change.
https://trac.pjsip.org/repos/ticket/1929 changed the API usage of
pjsip_auth_clt_init() to require the new API pjsip_auth_clt_deinit() to
clean up cached authentication allocations that get allocated with
pjsip_auth_clt_reinit_req().
ASTERISK-26516 #close
Change-Id: I4473141b8c3961d0dc91c382beb3876b3efb45c8
Libedit 3.1 is not build with unicode on as a default and so the
prototype for the el_gets callback changed from expecting a char buffer
to accepting a wchar buffer. If ast_el_read_char isn't changed,
the cli reads garbage from teh terminal.
Added a configure test for (*el_rfunc_t)(EditLine *, wchar_t *) and
updated ast_el_read_char to use the HAVE_ define to detemrine whether
to use char or wchar.
ASTERISK-26592 #close
Change-Id: I9099b46f68e06d0202ff80e53022a2b68b08871a
2 of the sanitizers didn't have default values so in systems that
don't support sanitizers menuselect would spit out warnings. They
were harmless but confusing. They've now been set to "0".
Change-Id: I08dc495e3b83f1feac3160b421f538c375fc5d58
