Reported by: yraber
Patches:
12694.2nd.diff uploaded by murf (license 17)
Tested by: murf, laurav
Thanks to file (Joshua Colp) for his IAX fix.
the change to cdr.c allows no-answer to percolate
up into CDR's, and feels like the right place to
locate this fix; if BUSY is done here, no-answer
should be, too.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@159316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: brainy
Tested by: murf
The specialized reset routine is tromping on the
flags field of the CDR. I made a change to not
reset the DISABLED bit. This should get rid of this
problem.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@139074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@135799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #10927)
Reported by: murf
Tested by: murf, deeperror
(closes issue #12907)
Reported by: falves11
Tested by: murf, falves11
(closes issue #11849)
Reported by: greyvoip
As to 11849, I think these changes fix the core problems
brought up in that bug, but perhaps not the more global
problems created by the limitations of CDR's themselves
not being oriented around transfers.
Reopen if necc, but bug reports are not the best
medium for enhancement discussions. We need to start
a second-generation CDR standardization effort to cover
transfers.
(closes issue #11093)
Reported by: rossbeer
Tested by: greyvoip, murf
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@127663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: arkadia
Tested by: murf, arkadia
Options added to forkCDR() app and the CDR() func to
remove some roadblocks for CDR applications.
The "show application ForkCDR" output was upgraded
to more fully explain the inner workings of forkCDR.
The A option was added to forkCDR to force the
CDR system to NOT change the disposition on the
original CDR, after the fork. This involves
ast_cdr_answer, _busy, _failed, and so on.
The T option was added to forkCDR to force
obedience of the cdr LOCKED flag in the
ast_cdr_end, all the disposition changing
funcs (ast_cdr_answer, etc), and in the
ast_cdr_setvar func.
The CHANGES file was updated to explain ALL
the new options added to satisfy this bug report
(and some requests made verbally and via
email, irc, etc, over the past months/year)
The 's' option was added to the CDR() func,
to force it to skip LOCKED cdr's in the
chain.
Again, the new options should be totally transparent
to existing apps! Current behavior of CDR,
forkCDR, and the rest of the CDR system should
not change one little bit. Until you add the
new options, at least!
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@122046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #11721)
(closes issue #12726)
Reported by: arkadia
Tested by: murf
These changes:
1. revert the changes made via bug 10668;
I should have known that such changes,
even tho they made sense at the time,
seemed like an omission, etc, were actually
integral to the CDR system via forkCDR.
It makes sense to me now that forkCDR didn't
natively end any CDR's, but rather depended
on natively closing them all at hangup time
via traversing and closing them all, whether
locked or not. I still don't completely
understand the benefits of setvar and answer
operating on locked cdrs, but I've seen
enough to revert those changes also, and
stop messing up users who depended on that
behavior. bug 12726 found reverting the changes
fixed his changes, and after a long review
and working on forkCDR, I can see why.
2. Apply the suggested enhancements proposed
in 10668, but in a completely compatible
way. ForkCDR will behave exactly as before,
but now has new options that will allow some
actions to be taken that will slightly
modify the outcome and side-effects of
forkCDR. Based on conversations I've had
with various people, these small tweaks
will allow some users to get the behavior
they need. For instance, users executing
forkCDR in an AGI script will find the
answer time set, and DISPOSITION set,
a situation not covered when the routines
were first written.
3. A small problem in the cdr serializer
would output answer and end times even
when they were not set. This is now
fixed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@118858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This protects against possible segfaults in applications that may try
to use data before checking length (ast_strdupa'ing it, for example)
(closes issue #12100)
Reported by: foxfire
Patches:
12100-nullappargs.diff uploaded by qwell (license 4)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@105005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
possibly cause memory to be accessed after it is freed, which causes all
sorts of random memory corruption. Instead, if a deletion fails, wait a
bit and try again (noting that another thread could change our taskid
value).
(closes issue #11386)
Reported by: flujan
Patches:
20080124__bug11386.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76, flujan, stuarth`
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@100465 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r70948 | murf | 2007-06-21 16:29:50 -0600 (Thu, 21 Jun 2007) | 1 line
This little fix is in response to bug 10016, but may not cure it. The code is wrong, clearly. In a situation where you set the CDR's amaflags, and then ForkCDR, and then set the new CDR's amaflags to some other value, you will see that all CDRs have had their amaflags changed. This is not good. So I fixed it.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@70949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
reduce standard thread stack size slightly to allow the pthreads library to allocate the stack+data and not overflow a power-of-2 allocation in the kernel and waste memory/address space
add a new stack size for 'background' threads (those that don't handle PBX calls) when LOW_MEMORY is defined
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@44378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
