https://origsvn.digium.com/svn/asterisk/trunk
................
r160004 | russell | 2008-12-01 11:34:31 -0600 (Mon, 01 Dec 2008) | 14 lines
Merged revisions 160003 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r160003 | russell | 2008-12-01 11:27:30 -0600 (Mon, 01 Dec 2008) | 6 lines
Apply some logic used in iax2_indicate() to iax2_setoption(), as well, since they
both have the potential to send control frames in the middle of call setup. We
have to wait until we have received a message back from the remote end before
we try to send any more frames. Otherwise, the remote end will consider it
invalid, and we'll get stuck in an INVAL/VNAK storm.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@160006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r159818 | kpfleming | 2008-11-29 11:57:39 -0600 (Sat, 29 Nov 2008) | 18 lines
incorporates r159808 from branches/1.4:
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@159851 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r159360 | murf | 2008-11-25 16:03:01 -0700 (Tue, 25 Nov 2008) | 23 lines
Merged revisions 159316 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r159316 | murf | 2008-11-25 15:41:10 -0700 (Tue, 25 Nov 2008) | 15 lines
(closes issue #12694)
Reported by: yraber
Patches:
12694.2nd.diff uploaded by murf (license 17)
Tested by: murf, laurav
Thanks to file (Joshua Colp) for his IAX fix.
the change to cdr.c allows no-answer to percolate
up into CDR's, and feels like the right place to
locate this fix; if BUSY is done here, no-answer
should be, too.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@159375 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r156243 | tilghman | 2008-11-12 12:55:18 -0600 (Wed, 12 Nov 2008) | 18 lines
Merged revisions 156229 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156229 | tilghman | 2008-11-12 12:39:21 -0600 (Wed, 12 Nov 2008) | 11 lines
Revert revision 132506, since it occasionally caused IAX2 HANGUP packets not
to be sent, and instead, schedule a task to destroy the iax2 pvt structure
10 seconds later. This allows the IAX2 HANGUP packet to be queued,
transmitted, and ACKed before the pvt is destroyed.
(closes issue #13645)
Reported by: dzajro
Patches:
20081111__bug13645__3.diff.txt uploaded by Corydon76 (license 14)
Tested by: vazir
Reviewed: http://reviewboard.digium.com/r/51/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@156288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r154428 | tilghman | 2008-11-04 17:03:00 -0600 (Tue, 04 Nov 2008) | 7 lines
Switch to using a thread condition to signal that a child thread is ready for
work, rather than a busy wait.
(closes issue #13011)
Reported by: jpgrayson
Patches:
chan_iax2_find_idle.patch uploaded by jpgrayson (license 492)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@154917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r154366 | tilghman | 2008-11-04 14:51:18 -0600 (Tue, 04 Nov 2008) | 16 lines
Merged revisions 154365 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r154365 | tilghman | 2008-11-04 14:49:33 -0600 (Tue, 04 Nov 2008) | 9 lines
On busy systems, it's possible for the values checked within a single line
of code to change, unless the structure is locked to ensure a consistent
state.
(closes issue #13717)
Reported by: kowalma
Patches:
20081102__bug13717.diff.txt uploaded by Corydon76 (license 14)
Tested by: kowalma
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@154367 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r147807 | murf | 2008-10-09 08:17:33 -0600 (Thu, 09 Oct 2008) | 15 lines
(closes issue #13557)
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@147811 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r146802 | tilghman | 2008-10-06 16:09:05 -0500 (Mon, 06 Oct 2008) | 15 lines
Merged revisions 146799 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r146799 | tilghman | 2008-10-06 15:52:04 -0500 (Mon, 06 Oct 2008) | 8 lines
Dialplan functions should not actually return 0, unless they have modified the
workspace. To signal an error (and no change to the workspace), -1 should be
returned instead.
(closes issue #13340)
Reported by: kryptolus
Patches:
20080827__bug13340__2.diff.txt uploaded by Corydon76 (license 14)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@146838 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r140489 | mmichelson | 2008-08-29 12:47:17 -0500 (Fri, 29 Aug 2008) | 30 lines
Merged revisions 140488 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140488 | mmichelson | 2008-08-29 12:34:17 -0500 (Fri, 29 Aug 2008) | 22 lines
After working on the ao2_containers branch, I noticed
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@140490 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r140053 | russell | 2008-08-26 10:29:25 -0500 (Tue, 26 Aug 2008) | 23 lines
Merged revisions 140051 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140051 | russell | 2008-08-26 10:27:23 -0500 (Tue, 26 Aug 2008) | 15 lines
Fix a race condition with the IAX scheduler thread. A lock and condition are
used here to allow newly scheduled tasks to wake up the scheduler just in case
the new task needs to run sooner than the current wakeup time when the thread
is sleeping. However, there was a race condition such that a newly scheduled
task would not properly wake up the scheduler or affect the wake up period.
The order of execution would have been:
1) Scheduler thread determines wake up time of N ms.
2) Another thread schedules a task and signals the condition, with an
execution time of < N ms.
3) Scheduler thread locks and goes to sleep for N ms.
By moving the sleep time determination to inside the critical section, this
possibility is avoided.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@140055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135747 | tilghman | 2008-08-05 16:34:46 -0500 (Tue, 05 Aug 2008) | 9 lines
In a conversion to use ast_strlen_zero, the meaning of the flag IAX_HASCALLERID
was perverted. This change reverts IAX2 to the original meaning, which was,
that the callerid set on the client should be overridden on the server, even if
that means the resulting callerid is blank. In other words, if you set
"callerid=" in the IAX config, then the callerid should be overridden to blank,
even if set on the client. Note that there's a distinction, even on realtime,
between the field not existing (NULL in databases) and the field existing, but
set to blank (override callerid to blank).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes enhances IAX2 encryption support by adding key rotation
to provide enhanced security. The key used for encryption is rotated right
after the call gets set up, and then again every few minutes. This was
discussed at the last AstriDevCon. For interoperability with older versions
of Asterisk, there is an option that disables key rotation.
(closes issue #13018)
Reported by: bbryant
Patches:
07072008__iax2_key_rotation.diff uploaded by bbryant (license 36)
Tested by: russell, bbryant
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
commands that conflicted with adding new features to the newer debug
commaands.
(closes issue #13103)
Reported by: mvanbaak
Patches:
2008071901__issue13103_iax2_set_debug_peer.diff uploaded by
mvanbaak (license 7)
Tested by: bbryant, mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132470 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130889 | tilghman | 2008-07-14 18:59:13 -0500 (Mon, 14 Jul 2008) | 8 lines
Override the callerid in all cases when the callerid is set in the user, not
just when a remote callerid is set. Also, if not set in the user, allow the
remote CallerID to pass through.
(closes issue #12875)
Reported by: dimas
Patches:
20080714__bug12875.diff.txt uploaded by Corydon76 (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130169 | tilghman | 2008-07-11 13:51:56 -0500 (Fri, 11 Jul 2008) | 7 lines
Ensure that a destination callno of 0 will not match for frames that do not
start a dialog (new, lagrq, and ping).
(closes issue #12963)
Reported by: russellb
Patches:
chan_iax2_dup_new_fix4.patch uploaded by jpgrayson (license 492)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130170 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r128795 | russell | 2008-07-07 17:41:48 -0500 (Mon, 07 Jul 2008) | 8 lines
Fix handling of when a pvt disappears. Properly return the pvt locked
and don't hold the pvt lock while destroying the ast_channel.
(closes issue #13014)
Reported by: jpgrayson
Patches:
chan_iax2_ast_iax2_new2.patch uploaded by jpgrayson (license 492)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128796 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r128639 | mmichelson | 2008-07-07 12:02:28 -0500 (Mon, 07 Jul 2008) | 10 lines
By using the iaxdynamicthreadcount to identify a thread, it was possible
for thread identifiers to be duplicated. By using a globally-unique monotonically-
increasing integer, this is now avoided.
(closes issue #13009)
Reported by: jpgrayson
Patches:
chan_iax2_dyn_threadnum.patch uploaded by jpgrayson (license 492)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
