There are some boolean attributes for T.38 such
as T38FaxFillBitRemoval, T38FaxTranscodingMMR, and
T38FaxTranscodingJBIG. By simply being present, we
should treat these as a "true" value. The current
code, however, was requiring a 1 or 0 as the value
of the attribute in order to parse it. This is due
to the fact that there are some T.38 endpoints and
gateways that also transmit this information
incorrectly. This patch follows the "be liberal in
what you accept and strict in what you send"
philosophy by accepting both the correctly- and
incorrectly-formatted attributes, but only sending
information as it is supposed to be sent.
It was also discovered that a particular type of
T.38 gateway sends some non-standard T.38 SDP
attributes. Instead of using T38FaxMaxDatagram
and T38MaxBitRate, it used T38MaxDatagram and
T38FaxMaxRate respectively. We now will properly
accept these attributes as well.
Note that there are a lot of patches cited in
the below commit message template. This is
because the person who submitted these patches is
an awesome person and wrote 1.4, 1.6.0, and 1.6.1
variants.
(closes issue #13976)
Reported by: linulin
Patches:
chan_sip.c.1.4-update1.diff uploaded by arcivanov (license 648)
chan_sip.c.1.6.0-update1.diff uploaded by arcivanov (license 648)
chan_sip.c.1.6.1-update1.diff uploaded by arcivanov (license 648)
chan_sip.c.1.4-relaxedT38_update1.diff uploaded by arcivanov (license 648)
chan_sip.c.1.6.0-relaxedT38_update1.diff uploaded by arcivanov (license 648)
chan_sip.c.1.6.1-relaxedT38_update1.diff uploaded by arcivanov (license 648)
Tested by: arcivanov
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@167179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The fix for this is to simply set the newly created datastore's data pointer
to NULL if it is inherited but has no duplicate callback.
(closes issue #14113)
Reported by: francesco_r
Patches:
14113.patch uploaded by putnopvut (license 60)
Tested by: francesco_r
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@166568 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It has been discovered that if a channel is locked prior
to a call to ast_autoservice_stop, then it is likely that
a deadlock will occur. The reason is that the call to
ast_autoservice_stop has a check built into it to be sure
that the thread running autoservice is not currently trying
to manipulate the channel we are about to pull out of
autoservice.
The autoservice thread, however, cannot advance beyond where
it currently is, though, because it is trying to acquire
the lock of the channel for which autoservice is attempting
to be stopped.
The gist of all this is that a channel MUST NOT be locked
when attempting to stop autoservice on the channel.
In this particular case, the channel was locked by a call
to ast_read. A call to ast_exists_extension led to autoservice
being started and stopped due to the existence of dialplan
switches.
It may be that there are future commits which handle the same
symptoms but in a different location, but based on my looks through
the code, it is very rare to see a construct such as this one.
(closes issue #14057)
Reported by: rtrauntvein
Patches:
14057v3.patch uploaded by putnopvut (license 60)
Tested by: rtrauntvein
Review: http://reviewboard.digium.com/r/107/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@166380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These changes eliminate the need for (and use of)
the KEEPALIVE return code in res_features.c;
There are other places that use this result code
for similar purposes at a higher level, these appear
to be left alone in 1.4, but attacked in trunk.
The reason these changes are being made in 1.4, is
that parking ends a channel's life, in some situations,
and the code in the bridge (and some other places),
was not checking the result code properly, and dereferencing
the channel pointer, which could lead to memory corruption
and crashes.
Calling the masq_park function eliminates this danger
in higher levels.
A series of previous commits have replaced some parking calls
with masq_park, but this patch puts them ALL to rest,
(except one, purposely left alone because a masquerade
is done anyway), and gets rid of the code that tests
the KEEPALIVE result, and the NOHANGUP_PEER result codes.
While bug 13820 inspired this work, this patch does
not solve all the problems mentioned there.
I have tested this patch (again) to make sure I have
not introduced regressions.
Crashes that occurred when a parked party hung up
while the parking party was listening to the numbers
of the parking stall being assigned, is eliminated.
These are the cases where parking code may be activated:
1. Feature one touch (eg. *3)
2. Feature blind xfer to parking lot (eg ##700)
3. Run Park() app from dialplan (eg sip xfer to 700)
(eg. dahdi hookflash xfer to 700)
4. Run Park via manager.
The interesting testing cases for parking are:
I. A calls B, A parks B
a. B hangs up while A is getting the numbers announced.
b. B hangs up after A gets the announcement, but
before the parking time expires
c. B waits, time expires, A is redialed,
A answers, B and A are connected, after
which, B hangs up.
d. C picks up B while still in parking lot.
II. A calls B, B parks A
a. A hangs up while B is getting the numbers announced.
b. A hangs up after B gets the announcement, but
before the parking time expires
c. A waits, time expires, B is redialed,
B answers, A and B are connected, after
which, A hangs up.
d. C picks up A while still in parking lot.
Testing this throroughly involves acting all the permutations
of I and II, in situations 1,2,3, and 4.
Since I added a few more changes (ALL references to KEEPALIVE in the bridge
code eliimated (I missed one earlier), I retested
most of the above cases, and no crashes.
H-extension weirdness.
Current h-extension execution is not completely
correct for several of the cases.
For the case where A calls B, and A parks B, the
'h' exten is run on A's channel as soon as the park
is accomplished. This is expected behavior.
But when A calls B, and B parks A, this will be
current behavior:
After B parks A, B is hung up by the system, and
the 'h' (hangup) exten gets run, but the channel
mentioned will be a derivative of A's...
Thus, if A is DAHDI/1, and B is DAHDI/2,
the h-extension will be run on channel
Parked/DAHDI/1-1<ZOMBIE>, and the
start/answer/end info will be those
relating to Channel A.
And, in the case where A is reconnected to
B after the park time expires, when both parties
hang up after the joyful reunion, no h-exten
will be run at all.
In the case where C picks up A from the
parking lot, when either A or C hang up,
the h-exten will be run for the C channel.
CDR's are a separate issue, and not addressed
here.
As to WHY this strange behavior occurs,
the answer lies in the procedure followed
to accomplish handing over the channel
to the parking manager thread. This procedure
is called masquerading. In the process,
a duplicate copy of the channel is created,
and most of the active data is given to the
new copy. The original channel gets its name
changed to XXX<ZOMBIE> and keeps the PBX
information for the sake of the original
thread (preserving its role as a call
originator, if it had this role to begin
with), while the new channel is without
this info and becomes a call target (a
"peer").
In this case, the parking lot manager
thread is handed the new (masqueraded)
channel. It will not run an h-exten
on the channel if it hangs up while
in the parking lot. The h exten will
be run on the original channel instead,
in the original thread, after the bridge
completes.
See bug 13820 for our intentions as
to how to clean up the h exten behavior.
Review: http://reviewboard.digium.com/r/29/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@166093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: tzafrir
Replace a bunch of if defined checks for Zaptel/DAHDI through several new defines in dahdi_compat.h. This removes a lot of code duplication. Example from bug:
#ifdef HAVE_ZAPTEL
fd = open("/dev/zap/pseudo", O_RDWR);
#else
fd = open("/dev/dahdi/pseudo", O_RDWR);
#endif
is replaced with:
fd = open(DAHDI_FILE_PSEUDO, O_RDRW);
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@165991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch resolved some random crash issues observed by a user on a BSD system
(closes issue #14111)
Reported by: ys
Patches:
app_chanspy.c.diff uploaded by ys (license 281)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@165889 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch handles some additional cases that could result in partial writes
to the file description. This was done to address complaints about partial
writes on AMI.
(issue #13546) (more changes needed to address potential problems in 1.6)
Reported by: srt
Tested by: russell
Review: http://reviewboard.digium.com/r/99/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@165796 65c4cc65-6c06-0410-ace0-fbb531ad65f3
is one of the few things I could find that was just plain wrong.
Even though it probably isn't possible for it to happen, it seems weird
to have code that checks if a pointer is NULL and then immediately dereferences
that pointer if it was NULL.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@164977 65c4cc65-6c06-0410-ace0-fbb531ad65f3
is exiting while holding a lock.
If the last lock attempt was a trylock, and it failed, it will still be in the
list of locks so that it can be reported.
(closes issue #13219)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@164881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a bug I noticed while looking at the code for app_macro. This return code
means that another thread has assumed ownership of the channel and it can no longer
be touched. (I hate this return code with a passion, by the way.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@164876 65c4cc65-6c06-0410-ace0-fbb531ad65f3
"module unload" was already identified as a command that can not be used
from the AMI. "restart gracefully" effectively unloads all modules, and will
run in to the same problems.
(closes issue #13894)
Reported by: kernelsensei
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@164806 65c4cc65-6c06-0410-ace0-fbb531ad65f3
One issue was that the ast_mutex_* API was being used within the context of the
thread local data destructors. We would go off and allocate more thread local data
while the pthread lib was in the middle of destroying it all. This led to a memory
leak.
Another issue was an invalid argument being provided to the the object_add
API call.
(closes issue #13678)
Reported by: ys
Tested by: russell
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@164736 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem was that these variables were being appended to the list of vars
on the sip_pvt every time a re-registration or re-subscription came in.
Since it's just a waste of memory to put them there unless the request was an
INVITE, then the fix is to check the request type before copying the vars.
(closes issue #14037)
Reported by: marvinek
Tested by: russell
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@164672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The issue that was reported was about a case where a RINGING channel got
redirected to an extension to pick up a call from parking. Once the parked
call got taken out of parking, it heard silence until the other side answered.
Ideally, the caller that was parked would get a ringing indication. This patch
fixes this case so that the caller receives ringback once it comes out of
parking until the other side answers.
The fixes are:
- Make sure we remember that a channel was an outgoing channel when doing
a masquerade. This prevents an erroneous ast_answer() call on the channel,
which causes a bogus 200 OK to be sent in the case of SIP.
- Add some additional comments to explain related parts of code.
- Update the handling of the ast_channel visible_indication field. Storing
values that are not stateful is pointless. Control frames that are events
or commands should be ignored.
- When a bridge first starts, check to see if the peer channel needs to be
given ringing indication because the calling side is still ringing.
- Rework ast_indicate_data() a bit for the sake of readability.
(closes issue #13747)
Reported by: davidw
Tested by: russell
Review: http://reviewboard.digium.com/r/90/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@164201 65c4cc65-6c06-0410-ace0-fbb531ad65f3
can better detect an exceptional case. This follows on to the changes made
in revision 156386. Related to issue #13851.
(closes issue #13974)
Reported by: paradise
Patches:
20081208__bug13974.diff.txt uploaded by Corydon76 (license 14)
Tested by: file, blitzrage, ZX81
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@164082 65c4cc65-6c06-0410-ace0-fbb531ad65f3
pointer inside editline to look back to asterisk.c, so others don't spend
as much time as I did looking (in the wrong place) for the appropriate
function.
Reported by: ZX81, via the #asterisk-users channel
Fixed by: me (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@163761 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These changes come from team/russell/issue_12658
1) Change autoservice to put digits on the head of the channel's frame readq
instead of the tail. If there were frames on the readq that autoservice
had not yet read, the previous code would have resulted in out of order
processing. This required a new API call to queue a frame to the head
of the queue instead of the tail.
2) Change up the processing of DTMF in ast_read(). Some of the problems
were the result of having two sources of pending DTMF frames. There
was the dtmfq and the more generic readq. Both were used for pending
DTMF in various scenarios. Simplifying things to only use the frame
readq avoids some of the problems.
3) Fix a bug where a DTMF END frame could get passed through when it
shouldn't have. If code set END_DTMF_ONLY in the middle of digit emulation,
and a digit arrived before emulation was complete, digits would get
processed out of order.
(closes issue #12658)
Reported by: dimas
Tested by: russell, file
Review: http://reviewboard.digium.com/r/85/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@163448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
is messed up. By intercepting those events with a signal handler in the remote
console, we can avoid those issues.
(closes issue #13464)
Reported by: tzafrir
Patches:
20081110__bug13464.diff.txt uploaded by Corydon76 (license 14)
Tested by: blitzrage
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@163383 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The change is to remove autoservice usage from dialplan functions that do not
need it because they do not perform operations that potentially block.
(closes issue #13940)
Reported by: tbelder
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@163253 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a custom feature at a time. This was especially problematic when custom
features ran for any appreciable amount of time.
The fix turned out to be quite simple. The dynamic features are now stored
in a read/write list instead of a list using a mutex.
(closes issue #13478)
Reported by: neutrino88
Fix suggested by file
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@163092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
