When using res_fax_digium, the T.38 CED tone was not being provided
properly which would cause some incoming faxes to fail. This was not an
issue with res_fax_spandsp since it does not strictly honor the
send_ced flag and sends the CED tone whenever receiving a T.38 fax.
(closes issue FAX-343)
Reported-by: Benjamin Tietz
Patch-by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377655 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ensure that a call is immediately torn down if a Session-Expires value
received in a 200 OK is less than the local Min-SE. This also prevents
Asterisk from allowing calls with Session-Expires below the
RFC4028-mandated minimum (90s).
(closes issue ASTERISK-20653)
Review: https://reviewboard.asterisk.org/r/2237/
Patch-by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix code to send in both rx and tx open stream messages correct codecs. Found that on phase 0/1 phones wrong codecs cause to no audio in some situations.
(issue ASTERISK-20183)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377591 65c4cc65-6c06-0410-ace0-fbb531ad65f3
no matter what the background color is.
Dark blue on a black background is unreadable, as is yellow on a
light background. This patch turns on the bright attribute for
colors when on a dark background and turns *off* the bright
attribute when the -W command line option is used (indicating a
_light_ background). This ensures that text is readable in both
cases.
Patch by: tilghman
Review: https://reviewboard.asterisk.org/r/2224
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Using the contrib sippeers.sql script to create the sippeers MySQL table
would result in being unable to place calls if you set the disallow value
to all.
(closes issue ASTERISK-20756)
Reported by: Andre Luis
Patches:
sippeers.patch patch uploaded by Andre Luis
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377431 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During the TLS re-work in chan_sip some TLS specific code was moved
into a separate function. This function operates on a copy of the
incoming SIP request. This copy was never deinitialized causing a
memory leak for each request processed.
This function is now given a SIP request structure which it can use
to copy the incoming request into. This reduces the amount of memory
allocations done since the internal allocated components are reused
between packets and also ensures the SIP request structure is
deinitialized when the TLS connection is torn down.
(closes issue ASTERISK-20763)
Reported by: deti
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When srtp_create fails, the session may be dealloced or just not alloced. At
the same time though, the session pointer might not be set to NULL in this
process and attempting to srtp_dealloc it again will cause a segfault. This
patch checks for failure of srtp_create and sets the session pointer to NULL
if it fails.
(closes issue ASTERISK-20499)
Reported by: tootai
Review: https://reviewboard.asterisk.org/r/2228/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Convert atexits list to a mutex instead of a rd/wr lock. The lock is
only write locked.
* Move CLI verbose Asterisk ending message to where AMI message is output
in really_quit() to avoid further surprises about using stuff already
shutdown.
(issue ASTERISK-20649)
Reported by: Corey Farrell
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Cleanup time zones on exit.
* Make exit clean/unclean report consistent for AMI and CLI in
really_quit().
(issue ASTERISK-20649)
Reported by: Corey Farrell
Patches:
core-cleanup-1_8-10.patch (license #5909) patch uploaded by Corey Farrell
core-cleanup-11-trunk.patch (license #5909) patch uploaded by Corey Farrell
Modified
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Simplify do_reload() return handling since it never returned anything
other than 0.
(issue ASTERISK-20649)
Reported by: Corey Farrell
Patches:
cdr-cleanup-1_8.patch (license #5909) patch uploaded by Corey Farrell
cdr-cleanup-10-11-trunk.patch (license #5909) patch uploaded by Corey Farrell
Modified
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The principal behind this patch is simple. During a transfer,
we manipulate channels that are owned by a separate thread than
the one we currently are running in, so it makes sense that we
need to grab a reference to the channels so that they cannot
disappear out from under us.
In the wild, crashes were sometimes seen when the transferring
party would hang up the call before the transfer target answered
the call. The most common place to see the crash occur was when
attempting to send a connected line update to the transferer
channel.
(closes issue ASTERISK-20226)
Reported by Jared Smith
Patches:
ASTERISK-20226.patch uploaded by Mark Michelson (License #5049)
Tested by: Jared Smith
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For 1.8, 10, 11 and trunk we are are improving the code readability.
For 11 and trunk, auto nat detection was added. The natdetected flag was being
set to 1 when the host address in the VIA header did not specifiy a port. This
patch fixes this by setting the port on the temporary sock address used to
SIP_STANDARD_PORT in order for the sock address comparison to work properly.
(closes issue ASTERISK-20724)
Reported by: Michael L. Young
Patches:
asterisk-20724-set-port-v2.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2206/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds the following CLI commands to control MALLOC_DEBUG reporting of
unreleased malloc memory when Asterisk is shut down.
memory atexit list on
memory atexit list off
memory atexit summary byline
memory atexit summary byfunc
memory atexit summary byfile
memory atexit summary off
* Made check all remaining allocated region blocks atexit for fence
violations.
* Increased the allocated region hash table size by about three times. It
still isn't large enough considering the number of malloced blocks
Asterisk uses.
* Made CLI "memory show allocations anomalies" use
regions_check_all_fences().
Review: https://reviewboard.asterisk.org/r/2196/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed CLI "memory show allocations" misspelling of anomalies option.
The command will still accept the original misspelling.
* Miscellaneous tweaks to CLI "memory show allocations" command output
format.
* Made CLI "memory show summary" summarize by line number instead of by
function if a filename is given.
* Made CLI "memory show summary" sort its output by filename or
function-name/line-number depending upon request.
* Miscellaneous tweaks to CLI "memory show summary" command output format.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376758 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, challenge would yield a multiple logins error if used
without providing the username (which isn't really supposed to be an argument
to challenge) if allowmultiplelogin was set to no because allowmultiplelogin
finds a user with a zero length login name. This check is simply disabled for
the challenge action when the username is empty by this patch.
(closes issue ASTERISK-20677)
Reported by: Vladimir
Patches:
challenge_action_nomultiplelogin.diff uploaded by Jonathan Rose (license 6182)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376725 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The '-' char is supposed to be ignored by the dialplan extension matching.
Unfortunately, it's treatment is not handled consistently throughout the
extension matching code.
* Made the old exten matching code consistently ignore '-' chars.
* Made the old exten matching code consistently handle case in the
matching.
* Made ignore empty character sets.
* Fixed ast_extension_cmp() to return -1, 0, or 1 as documented. The only
user of it in pbx_lua.c was testing for -1. It was originally returning
the strcmp() value for less than which is not usually going to be -1.
* Fix character set sorting if the sets have the same number of characters
and start with the same character. Character set [0-9] now sorts before
[02-9a] as originally intended.
* Updated some extension label and priority already in use warnings to
also indicate if the extension is aliased.
(closes issue ASTERISK-19205)
Reported by: Philippe Lindheimer, Birger "WIMPy" Harzenetter
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2201/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Removed call to ast_module_user_hangup_all() in res_config_mysql.c since
it is effectively a noop. No channels can attach a reference to that
module.
* Removed call to ast_module_user_hangup_all() in app_celgenuserevent.c.
The caller of unload_module() has already called it.
* Removed redundant channel module references in pbx_dundi.c. The
registered dialplan function callback dispatchers for the read/read2/write
callbacks already reference the module before calling.
* pbx_dundi: Moved unregistering CLI commands, DUNDi switch, and dialplan
functions to the first thing the unload_module() does. This will reduce
the chance of new channels using DUNDi services while the module is being
torn down.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Similar to the patch that moved the fork earlier in the startup sequence to
prevent mutex errors in the recursive mutex surrounding the read/write thread
registration lock, this patch re-initializes the logmsgs mutex. Part of the
start up sequence before forking the process into the background includes
reading asterisk.conf; this has to occur prior to the call to daemon in order
to read startup parameters. When reading in a conf file, log statements can
be generated. Since this can't be avoided, the mutex instead is
re-initialized to ensure a reset of any thread tracking information.
This patch also includes some additional debugging to catch errors when
locking or unlocking the recursive mutex that surrounds locks when the
DEBUG_THREADS build option is enabled. DO_CRASH or THREAD_CRASH will
cause an abort() if a mutex error is detected.
(issue ASTERISK-19463)
Reported by: mjordan
Tesetd by: mjordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Although it is very rare and timing dependent, the potential exists for the
call to 'daemon' to cause what appears to be a deadlock in Asterisk during
startup. This can occur when a recursive mutex is obtained prior to the
daemon call executing. Since daemon uses fork to send the process into the
background, any threading primitives are unsafe to re-use after the call.
Implementations of pthread recursive mutexes are highly likely to store the
thread identifier of the thread that previously obtained the mutex. If
the mutex was locked prior to the fork, a subsequent unlock operation will
potentially fail as the thread identifier is no longer valid. Since the
mutex is still locked, all subsequent attempts to grab the mutex by other
threads will block.
This behavior exhibited itself most often when DEBUG_THREADS was enabled, as
this compile time option surrounds the mutexes in Asterisk with another
recursive mutex that protects the storage of thread related information. This
made it much more likely that a recursive mutex would be obtained prior to
daemon and unlocked after the call.
This patch does the following:
a) It backports a patch from Asterisk 11 that prevents the spawning of the
localtime monitoring thread. This thread is now spawned after Asterisk has
fully booted.
b) It re-orders the startup sequence to call daemon earlier during Asterisk
startup. This limits the potential of threading primitives being accessed
by initialization calls before daemon is called.
c) It removes calls to ast_verbose/ast_log/etc. prior to daemon being called.
Developers should send error messages directly to stderr prior to daemon,
as calls to ast_log may access recursive mutexes that store thread related
information.
d) It reorganizes when thread local storage is created for storing lock
information during the creation of threads. Prior to this patch, the
read/write lock protecting the list of threads in ast_register_thread would
utilize the lock in the thread local storage prior to it being initialized;
this patch prevents that.
On a very related note, this patch will *greatly* improve the stability of the
Asterisk Test Suite.
Review: https://reviewboard.asterisk.org/r/2197
(closes issue ASTERISK-19463)
Reported by: mjordan
Tested by: mjordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376428 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The i and o options for monitor skip the input and output sides of a recording
respectively. This patch addresses a problem in those options when monitor is
called without specifying a specific filename where monitor will try to move
the recording that was skipped. Since this usually doesn't exist when these
options are used, it would produce a warning when it does this in most cases,
but it is conceivable that there are use cases where this could result in
moving/removing a file unintentionally.
(closes issue ASTERISK-20641)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2190/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376389 65c4cc65-6c06-0410-ace0-fbb531ad65f3
To quote wdoekes:
> Note that I'm not confirming legitimacy of having that file in tree at
> all. Is anyone using aelparse/conf2ael?
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376340 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channels would get stuck and MeetMe would repeatedly display an Unable
to write frame to channel error in the conf_run function if hung up
during certain sound prompts such as during user count announcements.
This patch fixes that by reintroducing a hangup check in the meetme's
main loop (also in conf_run).
(closes issue ASTERISK-20486)
Reported by: Michael Cargile
Review: https://reviewboard.asterisk.org/r/2187/
Patches:
meetme_hangup_patch_ASTERISK-20486_v3.diff uploaded by Jonathan Rose (license 6182)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376307 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Both hashtest and hashtest2 are manual testing apps that thrash hash
tables (hashtab and ao2 containers, respectively), by spinning up
several threads that randomly insert, delete, lookup and iterate over
the hash table. If the app doesn't crash, the hash table probably passes
the test. Those utils are not a part of the typical Asterisk build, so
they do not usually get compiled. This all makes them less that useful.
This patch removes those manual test programs and replaces them with
Asterisk unit test modules (test_{hashtab,astobj2}_thrash.so). It also
attempts to make the tests more deterministic.
* Rather than spinning up some number of threads that operate on the
hash table randomly, spin up four threads that concurrenly add,
remove, lookup and iterate over the hash table.
* Each thread checks the state of the hash table both during and after
execution, and indicates a test failure if things are not as expected.
* Each thread times out after 60 seconds to prevent deadlocking the unit
test run.
(closes issue ASTERISK-20505)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2189/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We were attempting to play "vm-urgent-removed", which didn't exist. Now we play "vm-marked-nonurgent" which exists
and is the correct sound file. Previous behavior was silence and a warning on the CLI.
(issue ASTERISK-20280)
(closes issue ASTERISK-20280)
Reported by: Tomo Takebe
Tested by: Rusty Newton
Patches:
asterisk20280.patch uploaded by Rusty Newton (license 5829)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Future dated call files are ignored when astspooldir is relative to the
current directory. The queue_file() assumed that the qdir needed to be
prepended if the given filename did not start with a '/'. If astspooldir
is relative it is not going to start from the root directory obviously so
it will not start with a '/'. The filename used in queue_file()
ultimately results in qdir prepended multiple times.
* Made queue_file() not prepend qdir if the filename contains a '/'.
(closes issue ASTERISK-20593)
Reported by: James Le Cuirot
Patches:
0004-Fix-future-call-files-from-relative-directories.patch (license #6439) patch uploaded by James Le Cuirot
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
generator.
This patch introduces an internal helper function to safely check whether the
current generator is the one that is expected before deactivating it. The
current externally accessible ast_channel_stop_generator() function has been
modified to be implemented in terms of the new function.
(closes issue ASTERISK-19918)
Reported by: Eduardo Abad
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The code which handles the ShowDialPlan action wrongly assumed that a non-NULL return value
from the function which retrieves headers from an action indicates that the header has a
value. This is incorrect and the contents must be checked to see if they are blank.
(closes issue ASTERISK-20628)
Reported by: jkroon
Patches:
asterisk-showdialplan-incorrect-error.patch uploaded by jkroon
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When adding a dynamic hint, if an extension contains an underscore no variable
subsitution is being performed.
This patch changes from checking if the extension contains an underscore to
checking if the extension begins with an underscore.
(closes issue ASTERISK-20639)
Reported by: Steven T. Wheeler
Tested by: Steven T. Wheeler, Michael L. Young
Patches:
asterisk-20639-dynamic-hint-underscore.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2188/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376142 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Turns out the "helpful" setting of ms and res in this
macro is completely useless after the timeout antipattern
fix.
If you're a new guy looking to write code, don't write
a macro like this one.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376087 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a SS7 call comes in requesting a CIC that is in-alarm, the call is
accepted and connects if the extension exists in the dialplan. The call
does not have any audio.
* Made release the call immediately with circuit congestion cause.
(closes issue ASTERISK-20204)
Reported by: Tuan Le
Patches:
jira_asterisk_20204_v1.8.patch (license #5621) patch uploaded by rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376058 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Makes malloc() behave like calloc(). It will return a memory block
filled with 0x55. A nonzero value.
* Makes free() fill the released memory block and boundary fence's with
0xdeaddead. Any pointer use after free is going to have a pointer
pointing to 0xdeaddead. The 0xdeaddead pointer is usually an invalid
memory address so a crash is expected.
* Puts the freed memory block into a circular array so it is not reused
immediately.
* When the circular array rotates out a memory block to the heap it checks
that the memory has not been altered from 0xdeaddead.
* Made the astmm_log message wording better.
* Made crash if the DO_CRASH menuselect option is enabled and something is
found.
* Fixed a potential alignment issue on 64 bit systems.
struct ast_region.data[] should now be aligned correctly for all
platforms.
* Extracted region_check_fences() from __ast_free_region() and
handle_memory_show().
* Updated handle_memory_show() CLI usage help.
Review: https://reviewboard.asterisk.org/r/2182/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this change, a common method for determining if a timeout
was reached was to call a function such as ast_waitfor_n() and inspect
the out parameter that told how many milliseconds were left, then use
that as the input to ast_waitfor_n() on the next go-around.
The problem with this is that in some cases, submillisecond timeouts
can occur, resulting in the out parameter not decreasing any. When this
happens thousands of times, the result is that the timeout takes much
longer than intended to be reached. As an example, I had a situation where
a 3 second timeout took multiple days to finally end since most wakeups
from ast_waitfor_n() were under a millisecond.
This patch seeks to fix this pattern throughout the code. Now we log the
time when an operation began and find the difference in wall clock time
between now and when the event started. This means that sub-millisecond timeouts
now cannot play havoc when trying to determine if something has timed out.
Part of this fix also includes changing the function ast_waitfor() so that it
is possible for it to return less than zero when a negative timeout is given
to it. This makes it actually possible to detect errors in ast_waitfor() when
there is no timeout.
(closes issue ASTERISK-20414)
reported by David M. Lee
Review: https://reviewboard.asterisk.org/r/2135/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a bridge is broken by an AMI Redirect action or the ChannelRedirect
application, an in progress DTMF digit could be stuck sending forever.
* Made simulate a DTMF end event when a bridge is broken and a DTMF digit
was in progress.
(closes issue ASTERISK-20492)
Reported by: Jeremiah Gowdy
Patches:
bridge_end_dtmf-v3.patch.txt (license #6358) patch uploaded by Jeremiah Gowdy
Modified to jira_asterisk_20492_v1.8.patch
jira_asterisk_20492_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2169/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, if an acknowledgement of a timer fails Asterisk will not realize
that a serious error occurred and will continue attempting to use the timer's
file descriptor. This can lead to situations where errors stream to the
CLI/log file. This consumes significant resources, masks the actual problem
that occurred (whatever caused the timer to fail in the first place), and
can leave channels in odd states.
This patch propagates the errors in the timing resource modules up through
the timer core, and makes users of these timers handle acknowledgement
failures. It also adds some defensive coding around the use of timers
to prevent using bad file descriptors in off nominal code paths.
Note that the patch created by the issue reporter was modified slightly for
this commit and backported to 1.8, as it was originally written for
Asterisk 10.
(issue ASTERISK-20032)
Reported by: Jeremiah Gowdy
patches:
jgowdy-timerfd-6-22-2012.diff uploaded by Jeremiah Gowdy (license 6358)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
