This patch drastically simplifies the device state aggegation code.
The old method was not only overly complex, but also made it impossible
to return AST_DEVICE_INVALID from the aggregation code. The unit test
update is as a result of fixing that bug.
The SIP change stems from a bug introduced by removing a DNS lookup
for hostname-based SIP channels.
(closes issue ASTERISK-16702)
Review: https://reviewboard.asterisk.org/r/1808/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@358943 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Attempting to transfer with SIP to an address like 1XXXXX@ip.ad.re.ss:5061 would fail
because port would be cut from the host string and ignored. This simply keeps chan_sip
from cutting off the port number during these kinds of transfers.
(closes issue ASTERISK-19321)
Reported by: Federico Alves
Review: https://reviewboard.asterisk.org/r/1790/diff/#index_header
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@358643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix referencing the wrong variable in chan_dahdi.c:my_set_cadence().
Thanks to Sean Bright for compiling with -Wshadow and finding this bug.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@358377 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SS7 is a trunk protocol and should clear a failed call as soon as
possible.
* Made SS7 hangup a call immediately if it has not connected yet for
INCOMPLETE/BUSY/CONGESTION causes. Otherwise, play an appropriate inband
tone.
(closes issue ASTERISK-19372)
Reported by: Igor Nikolaev
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@358278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Outgoing SS7 calls fail to detect incoming DTMF so any bridged channel
that requires out-of-band DTMF will not work.
* Added sig_ss7_open_media() calls at appropriate places in sig_ss7.c.
The new call converts conditionaled out unconverted code and shows that
the code really did something useful.
* Improved some chan_dahdi DTMF debug messages to help track DTMF
handling.
(closes issue ASTERISK-19312)
Reported by: Igor Nikolaev
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@358260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk was not setting pendinginvite in the upper half of
handle_request_invite such that the 4xx was retransmitted repeatedly even
though an ack was received for every retransmission.
(closes issue ASTERISK-19303)
Reported by: Jon Tsiros
Patches:
fix-19303.patch uploaded by Jeremiah Gowdy (license 6358)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@358115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
All of these were pretty obviously unused. Some were unused because
the code that used them was #if 0'd. In those cases, I just commented
out the unused-but-set variables.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@358029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The check if an ISDN call is bridged before it could be placed on hold is
not necessary and is overly restrictive. The check was originally done to
prevent problems with call transfers in case a user tried to transfer a
call connected to an application to another call connected to an
application. The ISDN transfer code has not required this restriction for
quite some time because ECT could transfer any two active calls to each
other.
* Remove ISDN hold restriction for calls connected to applications.
* Made ast_waitfordigit_full() ignore AST_CONTROL_HOLD and
AST_CONTROL_UNHOLD instead of generating a warning message.
(closes issue ASTERISK-19388)
Reported by: Birger Harzenetter
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@357894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, Using "transport=" multiple times would cause them to add to one
another like allow/deny. This patch changes that behavior to simply use the transport
option specified last. Also, if no transport option is applied now, the default will
automatically be UDP.
(closes ASTERISK-19352)
Reported by: jamicque
Patches:
asterisk-19352-transport-warning-message-v1.patch uploaded by Michael L. Young (license 5026)
issueA19352_no_transport_is_udp.patch uploaded by Walter Doekes (license 5674)
Review: https://reviewboard.asterisk.org/r/1745/diff/#index_header
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@357266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP TCP/TLS worker threads were created joinable but noone could join
them if they died on their own.
* Fix the SIP TCP/TLS worker threads to not be created joinable.
* _sip_tcp_helper_thread() only needs one parameter since the pvt
parameter is only passed in as NULL and never used.
(closes issue ASTERISK-19203)
Reported by: Steve Davies
Review: https://reviewboard.asterisk.org/r/1714/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@356677 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, when using res_srtp, once the SRTP policy has been added to the
current session the policy is locked into place. Any attempt to replace an
existing policy, which would be needed if the remote endpoint negotiated a new
cryptographic key, is instead rejected in res_srtp. This happens in particular
in transfer scenarios, where the endpoint that Asterisk is communicating with
changes but uses the same RTP session.
This patch modifies res_srtp to allow remote and local policies to be reloaded
in the underlying SRTP library. From the perspective of users of the SRTP API,
the only change is that the adding of remote and local policies are now added
in a single method call, whereas they previously were added separately. This
was changed to account for the differences in handling remote and local
policies in libsrtp.
Review: https://reviewboard.asterisk.org/r/1741/
(closes issue ASTERISK-19253)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Patches:
srtp_renew_keys_2012_02_22.diff uploaded by Matt Jordan (license 6283)
(with some small modifications for this check-in)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@356604 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Custom parking extensions may not be coded such that the first and only
extension priority is the Park application. These custom parking
extensions will not be recognized as parking extensions. When a call is
blind transferred to an extension that is not recognized as a parking
extension, the normal blind transfer code causes the transferred channel
to start executing dialplan. Calls that get parked in this manner do not
know the original channel name that parked the call so the original parker
could never be called back if the parked call is not retrieved before the
timeout time. The parking space is also announced to the call being
parked as a side effect of not knowing the original parking channel.
* Fix handling of BLINDTRANSFER channel variable for call parking.
* Fixed SIP blind transfer using the wrong dialplan context variable to
check for the parking extension.
(closes issue ASTERISK-19322)
Reported by: aragon
Tested by: rmudgett, jparker
Review: https://reviewboard.asterisk.org/r/1730/
JIRA AST-766
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@356521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we send an ACK for a 2xx response to an INVITE, we are supposed
to use the learned route set. However, when we receive a non-2xx final
response to an INVITE, we are supposed to send the ACK to the same place
we initially sent the INVITE.
We had been doing this up until the changes went in that would build a route
set from provisional responses. That introduced a regression where we would
use the learned route set under all circumstances.
With this change, we now will set the destination of our ACK based on the
invitestate. If it is INV_COMPLETED then that means that we have received
a non-2xx final response (INV_TERMINATED indicates a 2xx response was received).
If it is INV_CANCELLED, then that means the call is being canceled, which
means that we should be ACKing a 487 response.
The other change introduced here is setting the invitestate to INV_CONFIRMED
when we send an ACK *after* the reqprep instead of before. This way, we can
tell in reqprep more easily what the invitestate is prior to sending the ACK.
(closes issue ASTERISK-19389)
reported by Karsten Wemheuer
patches:
ASTERISK-19389v2.patch uploaded by Mark Michelson (license #5049)
(with some slight modifications prior to commit)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@356475 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "sip show peers" command uses a fix sized array to sort the current peers
in the peers ao2_container. The size of the array is based on the current
number of peers in the container. However, once the size of the array is
determined, the number of peers in the container can change, as the peers
container is not locked. This could cause a buffer overrun when populating
the array, if peers were added to the container after the array was created.
Additionally, a memory leak of the allocated array would occur if a user
caused the _show_peers method to return CLI_SHOWUSAGE.
We now create a snapshot of the current peers using an ao2_callback with the
OBJ_MULTIPLE flag. This size of the array is set to the number of peers
that the iterator will iterate over; hence, if peers are added or removed
from the peers container it will not affect the execution of the "sip show
peers" command.
Review: https://reviewboard.asterisk.org/r/1738/
(closes issue ASTERISK-19231)
(closes issue ASTERISK-19361)
Reported by: Thomas Arimont, Jamuel Starkey
Tested by: Thomas Arimont, Jamuel Starkey
Patches: sip_show_peers_2012_02_16.diff uploaded by mjordan (license 6283)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@356214 65c4cc65-6c06-0410-ace0-fbb531ad65f3
'p->outgoing' in chan_dahdi and sig_analog wern't kept in sync, particulary FXS ast_hangup didn't clear the 'outgoing' flag.
sig_pri and sig_ss7 were keeping 'outgoing' flag insync.
Now provides a callback for all the low level sig_XXX modules.
(issue ASTERISK-19316)
alecdavis (license 585)
Reported by: Jeremy Pepper
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1747/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
IAX2 uses the trunkfreq variable to determine how often to send trunk packets, but
this value is in milliseconds while ast_timer_set_rate() expects the rate argument
to be ticks per second. So we divide 1000 by trunkfreq and pass that in instead.
With a default of 20ms, this change makes IAX2 send trunk packets every 20ms
instead of every 50ms.
Tracked down by myself and Bob Wienholt.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes two main issues:
1. Asterisk would send a CANCEL to the route created by the provisional response
instead of using the same destination it did in the initial INVITE.
2. If a new route set arrives in a 200 OK than was in the 1XX response (perfectly
possible if our outbound INVITE gets forked), then the route set in the 200 OK
needs to overwrite the route set in the 1XX response.
(closes issue ASTERISK-19358)
Reported by: Karsten Wemheuer
Tested by: Karsten Wemheuer
patches:
ASTERISK-19358.patch uploaded by Mark Michelson (license 5049)
ASTERISK-19358.patch uploaded by Stefan Schmidt (license 6034)
Review: https://reviewboard.asterisk.org/r/1749
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Back in r646, TRUNK_CALL_START was added and defined as 0x4000. That same value
was also hard-coded in one part of the IAX2 code instead of using the #define.
TRUNK_CALL_START has changed over the years (for dealing with LOW_MEMORY), but
the hard-coded usage was never updated to match. This patch fixes that.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was causing identification that should have been
made private to be public.
(closes issue AST-814)
reported by Patrick Anderson
Patches:
chan_sip.c.diff uploaded by Patrick Anderson (license 5430)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
send_apathetic_reply takes the incoming frame's source call number as the
destination call number for the outgoing frame. If the incoming frame was a
full frame, then the high order bit of the source call number is set and will be
interpreted as a retransmit when sent back out as the destination call number.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-18924, SIP INFO DTMF handlingw as changed to account for both
lowercase alphatbetic DTMF events, as well as uppercase alphabetic DTMF
events. When this occurred, the comparison of the character buffer containing
the event code was changed such that the buffer was first compared again '0'
and '9' to determine if it was numeric. Unfortunately, since the first
character in the buffer will typically be '1' in the case of non-numeric
event codes (10-16), this caused those codes to be converted to a DTMF event
of '1'. This patch fixes that, and cleans up handling of both
application/dtmf-relay and application/dtmf content types.
Review: https://reviewboard.asterisk.org/r/1722/
(closes issue ASTERISK-19290)
Reported by: Ira Emus
Tested by: mjordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. Set lastms to 0 when clearing instead of ""
2. Don't set ipaddr or port to the string "(null)" when they are empty
3. Add missing required fields, set default for lastms to 0, and modify
the length of the ipaddr field to 45 in the Postgresql realtime.sql
file.
(closes issue ASTERISK-19172)
Review: https://reviewboard.asterisk.org/r/1703/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bad locking order was added to chan_agent to prevent segfaults from having no locking
in a patch by irroot. This patch addresses the bad locking order by releasing locks before
getting the right locking order to stop deadlocks from occuring when doing multiple
interactions with agents.
(closes issue ASTERISK-19285)
Reported by: Alex Villacis Lasso
Review: https://reviewboard.asterisk.org/r/1708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353999 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After R340970 Asterisk was still polling the RTCP file descriptor after RTCP is
shut down and removed. If the descriptor happened to have data ready when the
removal occured then Asterisk would go into an infinite loop trying to read
data that it can never actually access. This change disables the audio RTCP
file descriptor for the duration of the T.38 transaction.
(closes issue ASTERISK-18951)
Reported-by: Kristijan Vrban
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This feature also causes the sending complete ie to be sent for switch
types that do not automatically send the ie. (EuroISDN/ETSI)
The main difference between dialing Dial(DAHDI/g0/1234w888) and
Dial(DAHDI/g0/1234,,D(888)) is the sending of the sending complete ie.
(closes issue ASTERISK-19176)
Reported by: rmudgett
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A previous patch I committed from ASTERISK-16930 unexpectedly changed some output for
the AMI action "sippeers" which this patch changes back. Also, this aligns the output
for the cli command "sip show peers" and fixes another issue that patch introduced by
using ast_sockaddr_stringify calls multiple times without immediately using the pointer.
I also went ahead and did a little janitorial work to clean up whitespace in
_sip_show_peers.
(issue ASTERISK-16930)
(closes issue ASTERISK-19281)
Reported by: Patrick El Youssef
Patches:
ASTERISK-19281.diff uploaded by Walter Doekes (license 5674)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are a number of cleaner looking wrappers for ast_sockaddr_stringify_fmt
available which are slightly more readable than using a direct call to
ast_sockaddr_stringify_fmt. This patch switches a number of those calls in
chan_sip to use those wrappers and is generally harmless.
(Closes issue ASTERISK-16930)
Reported by: Michael L. Young
Patches:
chan_sip-broken-registration-1.8.diff uploaded by Michael L. Young (license 5026)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's dnsmgr currently takes a pointer to an ast_sockaddr and updates it
anytime an address resolves to something different. There are a couple of
issues with this. First, the ast_sockaddr is usually the address of an
ast_sockaddr inside a refcounted struct and we never bump the refcount of those
structs when using dnsmgr. This makes it possible that a refresh could happen
after the destructor for that object is called (despite ast_dnsmgr_release
being called in that destructor). Second, the module using dnsmgr cannot be
aware of an address changing without polling for it in the code. If an action
needs to be taken on address update (like re-linking a SIP peer in the
peers_by_ip table), then polling for this change negates many of the benefits
of having dnsmgr in the first place.
This patch adds a function to the dnsmgr API that calls an update callback
instead of blindly updating the address itself. It also moves calls to
ast_dnsmgr_release outside of the destructor functions and into cleanup
functions that are called when we no longer need the objects and increments the
refcount of the objects using dnsmgr since those objects are stored on the
ast_dnsmgr_entry struct. A helper function for returning the proper default SIP
port (non-tls vs tls) is also added and used.
This patch also incorporates changes from a patch posted by Timo Teräs to
ASTERISK-19106 for related dnsmgr issues.
(closes issue ASTERISK-19106)
Review: https://reviewboard.asterisk.org/r/1691/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353371 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* fix: use %u instead of %d when dealing with CSeq numbers - to remove possibility of -ve numbers.
* fix: change all uses of seqno and friends (ocseq icseq) from 'int' or 'unsigned int' to uint32_t.
Summary of CSeq numbers.
An initial CSeq number must be less than 2^31
A CSeq number can increase in value up to 2^32-1
An incrementing CSeq number must not wrap around to 0.
Tested with Asterisk 1.8.8.2 with Grandstream phones.
alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1699/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353320 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, if an m-line in an SDP offer or answer had a port number of zero,
that line was skipped, and resulted in an 'Unsupported SDP media type...'
warning message. This was misleading, as the media type was not unsupported,
but was ignored because the m-line indicated that the media stream had been
rejected (in an answer) or was not going to be used (in an offer).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@353260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
