The twisted logic determining if a config file should be reloaded was
mostly broken and disabled. The incorrect test that ASTERISK-23383 fixed
actually reenabled the broken logic. The incorrect test was causing the
timestamp to always be cleared which caused config files with includes to
always be reloaded.
* Made wildcard includes always cause a reload. Determining if a file was
deleted cannot be determined without restructuring the cache to determine
if any files are missing from the last files actually loaded. Also
without refactoring config_text_file_load(), the glob loop couldn't check
more than one file for changes anyway.
* Made remove the cache entry if the file no longer exists when trying to
get its timestamp or it is no longer a regular file. This fixes the
corner case where the file was loaded, then deleted, then the config
reloaded, then the file restored with the same timestamp, and then the
config reloaded again.
* Made remove the cache entry include list when actually loading the file.
This gets rid of any stale includes the file had from the last time the
file was loaded.
ASTERISK-23683 #close
Reported by: tootai
Review: https://reviewboard.asterisk.org/r/3575/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@415225 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cleans up the safe_asterisk script and adds the ASTSAFE_FOREGROUND
option that allows the debian asterisk init script to capture the
right pid.
* Drop the vim #modeline which wasn't used. Use test consistently
without the odd configure xno syntax. Double quote all paths.
General cleanup.
* Don't output message()s to the console but only to TTY if set.
* Allow TTY to be "no" as well as empty (debian compatibility with
debian/patches/safe_asterisk-config).
* Add option to export ASTSAFE_FOREGROUND=1 from the init script
that calls this to disable backgrounding. Debian uses a similar
method in debian/patches/safe_asterisk-nobg).
ASTERISK-23492 #close
Review: https://reviewboard.asterisk.org/r/3574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@415132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Conference names were not checked for maximum length, allowing unexpected
behaviour. This change adds checking to ensure the maximum length is not
exceeded. The maximum length is also changed from 32 to AST_MAX_EXTENSION.
ASTERISK-23035 #close
Reported by: Iñaki Cívico
Tested by: Iñaki Cívico
Patches:
confbridge-enforce_max-1.8.patch uploaded by coreyfarrell (license 5909)
confbridge-enforce_max-11up.patch uploaded by coreyfarrell (license 5909)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@415060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The change that removed the fixed size buffers in odbc-related code --
removing arbitrary column width limits -- was incomplete. This change
adds: no segfault on writesql without insertsql and return value checks
after strdup.
While I was in the vicinity I cleaned up the linefeeds in the odbc
function descriptions, moved some code for clarity, removed some blobs
and noted (but didn't fix) that the 'odbc write ... exec' CLI command
doesn't behave as the dialplan equivalent when insertsql= is used.
ASTERISK-23582 #close
Review: https://reviewboard.asterisk.org/r/3579/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@414997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When invoking UpdateConfig AMI action with Action set to EmptyCat, Asterisk
will make all categories empty in the config but the one requested with a
Cat variable. This is due to a bug in ast_category_empty (main/config.c)
that makes an incorrect comparison for a category name.
This patch corrects the comparison such that only the requested category
is cleared.
Review: https://reviewboard.asterisk.org/r/3573/
ASTERISK-23803 #close
Reported by: zvision
patches:
manager.c.diff uploaded by zvision (License 5755)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@414880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Dynamic and pattern matching hints should not be checked for their last
known state until they are instantiated by subscribers.
(closes issue AFS-56)
Reported by: John Hardin
Patch AFS-56-pbx.diff submitted by Matt Jordan (license 6283)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@414813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk started counting the session timer at INVITE while the other
end correctly started at 200. This meant that for short session-expiries
(90 seconds) combined with long ringing times (e.g. 30 seconds), asterisk
would wrongly assume that the timer was hit before the other end thought
it was time to send a session refresh. This resulted in prematurely
ended calls.
This changes the session timer to start counting first at 200 like RFC
says it should.
(Also removed a few excess NULL checks that would never hit, because if
they did, asterisk would have crashed already.)
ASTERISK-22551 #close
Reported by: i2045
Review: https://reviewboard.asterisk.org/r/3562/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@414620 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ODBC realtime driver uses ^NN parameter encoding to cope with the
special meaning of the semi-colon. A semi-colon in a field is
interpreted as if the key was supplied twice, something which isn't
otherwise possible with fixed database columns. E.g. allow=alaw;ulaw
is parsed as allow=alaw and allow=ulaw. A literal semi-colon is
rewritten to ^3B when stored in the database.
The module uses a stringfield to efficiently store the encoded
parameters. However, this stringfield wasn't always freed in some
off-nominal cases.
Commit r413241 fixed initialization so the encoding for INSERT and
DELETE queries wouldn't crash. (Only SELECTs and UPDATEs worked
apparently.) But that commit forgot the frees. This change cleans
that up.
Review: https://reviewboard.asterisk.org/r/3555/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@414564 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally, when the last marked user leaves the conference, waitmarked
users don't get MOH if MOH is supposed to be played while a waitmarked
user is waiting for another marked user.
* Made not interrupt MOH when the user is a waitmarked user. The
waitmarked user doesn't need to hear any leave announcements from the
conference as the user would have already heard different leave
announcements if they were enabled. Apparently DAHDI occasionally sends
unending non-silent streams to these users or a normal user still in the
conference has continuous high background noise. These non-silent streams
cause MOH to be suspended while the never ending "announcement" is played.
Issue caused by ASTERISK-13680.
AST-1349 #close
Reported by: Tyler Stewart
Review: https://reviewboard.asterisk.org/r/3543/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@414401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The fix for ASTERISK-12292 was a bit too aggressive. You could have
generators pointed at each other on local channels but need to get other
kinds of frames such as DTMF or CONNECTED_LINE frames accross.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@414269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Recurisve usage of replace() resulted in corruption of the
temporary string storage and potential crash. By changing
the string to be allocated separtely per instance, this is
eliminated.
ASTERISK-23650 #comment Reported by: Roel van Meer
ASTERISK-23650 #close
Review: https://reviewboard.asterisk.org/r/3539/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@414214 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* fix to use astlogdir option for h323_log file instead of hardcoded
ASTERISK-23754 #close
Reported by: Igor Goncharovsky
Patches:
ooh323_logger_patch.diff
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@414152 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Check if waitingfordt (waitfordialtone) is enabled in dahdi_read() to
allow the DSP to operate early enough to detect dialtone.
* Made use the correct variable in my_check_waitingfordt().
ASTERISK-23709 #close
Reported by: Steve Davies
Patches:
dialtone_detect_fix (license #5012) patch uploaded by Steve Davies
Review: https://reviewboard.asterisk.org/r/3534/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@414067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Starting a conference recording using the admin menu overwrites the DAHDI
conference data structure used to modify the admin user's conference mute
mode.
* Made no longer pass the user's DAHDI conference data structure into the
menu functions. The menu now uses its own DAHDI conference data
structure to start the recording channel.
* Moved the unlock conf->playlock to before playing the conf-full message.
No sense keeping the lock while that prompt is playing. The user is never
going to get into the conference at that point.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@413991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST_FLAG_ANSWERED_ELSEWHERE was not propagated back from local channels.
It is now. That means that when a call is picked up from a callgroup of
local channels, the other channels will now properly see it as "picked up".
This occurs when you use a construct like Dial(Local/a@context&Local/b@context)
where a@context and b@context dial two chan_sip devices respectively. If one
device picks up, the other will not see "1 missed call" anymore. In this
respect, it now behaves the same as when doing Dial(SIP/a&SIP/b).
Review: https://reviewboard.asterisk.org/r/3540/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@413949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When overlap dialing is enabled, the lack of inband audio available
information in the SETUP_ACKNOWLEDGE events causes an interoperability
problem with SIP. sig_pri doesn't know if there is dialtone present when
a SETUP_ACKNOWLEDGE is received so it assumes it is there and posts an
AST_CONTROL_PROGRESS frame. The SIP channel driver then sends out a 183
Session Progress and blocks the desired 180 Ringing message when the
ALERTING message comes in.
* Made the configure script detect if the installed version of libpri
supports the SETUP_ACKNOWLEDGE enhancements.
* Using the new API, made generate an AST_CONTROL_PROGRESS frame on an
incoming SETUP_ACKNOWLEDGE message when the message indicates inband audio
is present instead of assuming that dialtone is present.
* Using the new API, made SETUP_ACKNOWLEDGE send out an inband audio
available indication only if dialtone is expected. The change also makes
the fallback behaviour of sending the PROGRESS message better by sending
it only if dialtone is expected.
* Changed receiving a PROCEEDING message to not generate an
AST_CONTROL_PROGRESS frame if the progress indication ie indicates
non-end-to-end-ISDN. This helps interoperability with SIP.
* Changed sending a PROCEEDING message in response to an
AST_CONTROL_PROCEEDING frame to not indicate inband audio available. It
was silly to do so anyway because the channel driver doesn't know if
inband audio is even available. This helps interoperability with SIP.
This patch and a corresponding change in libpri work together to allow
Asterisk to control the inband audio available progress indication ie on
the SETUP_ACKNOWLEDGE message when dialtone is present.
AST-1338 #close
Reported by: Tyler Stewart
Review: https://reviewboard.asterisk.org/r/3521/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@413714 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This resolves a large number of compiler warnings from GCC 4.10 which
cause the build to fail under dev mode. The vast majority are
signed/unsigned mismatches in printf-style format strings.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@413586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The realtime API specifies that the store callback is supposed to return the number
of rows affected. res_config_pgsql was instead returning an Oid cast as an int, which
during any nominal execution would be cast to 0. Returning 0 when more than 0 rows were
inserted causes problems to the function's callers.
To give an idea of how strange code can be, this is the necessary code change to fix
a device state issue reported against chan_pjsip in Asterisk 12+. The issue was that
the registrar would attempt to insert contacts into the database. Because of the 0
return from res_config_pgsql, the registrar would think that the contact was not successfully
inserted, even though it actually was. As such, even though the contact was query-able
and it was possible to call the endpoint, Asterisk would "think" the endpoint was unregistered,
meaning it would report the device state as UNAVAILABLE instead of NOT_INUSE.
The necessary fix applies to all versions of Asterisk, so even though the bug reported
only applies to Asterisk 12+, the code correction is being inserted into 1.8+.
Closes issue ASTERISK-23707
Reported by Mark Michelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@413224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Backport -r411687 and fix the fix because content_length is the length of
out plus the length of the file controlled by fd.
When a response has an out content length of 0, fwrite would be called to
write a buffer with no data in it. This resulted in the following classic
error message:
[Apr 3 11:49:17] ERROR[26421] http.c: fwrite() failed: Success
This patch makes it so that we only attempt to write the content of out if
the out string is non-zero.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@412922 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds the TCP_NODELAY option to accepted connections on the HTTP
server built into Asterisk. This option disables the Nagle algorithm
which controls queueing of outbound data and in some cases can cause
delays on receipt of response by the client due to how the Nagle
algorithm interacts with TCP delayed ACK. This option is already set on
all non-HTTP AMI connections and this change would cover standard HTTP
requests, manager HTTP connections, and ARI HTTP requests and
websockets in Asterisk 12+ along with any future use of the HTTP
server.
Review: https://reviewboard.asterisk.org/r/3466/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@412745 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r411189, some behavior was changed which made sendrpid behavior
act in a more trusting manner by sending full user data for peers
set with private caller presence in P-Asserted-Identity headers.
Since this changed long time expected behaviors, we decided to pull
that patch when that was pointed out by the community. Instead, this
patch provides a trust_id_outbound setting which will expose the data
per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers
at all if set to 'no'. By default trust_id_outbound will be set to
'legacy' which will preserve the behavior prior to these patches.
Extra special thanks to Walter Doekes for providing advice and
feedback.
(closes issue AST-1301)
(closes issue ASTERISK-19465)
Reported by: Krzysztof Chmielewski
Review: https://reviewboard.asterisk.org/r/3447/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@412744 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two issues in app_sms:
(1) Firstly, the 'flags' field on the stack in sms_exec() is uninitialised,
causing it to use the wrong protocol in some cases. This patch correctly
initializes the flags fields.
(2) Secondly, when disconnect supervision is not working or
inbanddisconnect=yes is set in chan_dahdi.conf, app_sms was failing to
terminate the call after it sent the REL(ease) message and the peer stopped
talking to it. This patch fixes the code to handle the 'bad stop bit'
message more gracefully in that case, and hang up the call.
Review: https://reviewboard.asterisk.org/r/1392/
ASTERISK-18331 #close
Reported by: David Woodhouse
patches:
asterisk-fix-sms.patch uploaded by David Woodhouse (License 5754)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@412655 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In sounds/Makefile
1 Adds and moves some lines necessary for the en_GB core set. I'm just following how the other sets are defined here.
2 removes the ES extra sounds related lines as we don't have ES extra sound sets.
In sounds/sounds.xml
3 Adds <support_level> definitions to all the sound sets as we have these defined in 11,12,Trunk, but not in 1.8
4 Adds member definitons for EN_AU, EN_GB, IT for core sound sets, and EN_GB in extra sound sets
ASTERISK-23550
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/3464/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@412585 65c4cc65-6c06-0410-ace0-fbb531ad65f3
THis patch fixes an issue in chan_oss when building on certain platforms. It
ensures that soundcard.h is found.
Review: https://reviewboard.asterisk.org/r/3426
Note that this patch is a part of the patch on ASTERISK-23576; the Makefile
portion only applies to Asterisk 11+.
(issue ASTERISK-23576)
Reported by: Sebastian Wiedenroth
patches:
fix-sunos.diff uploaded by Sebastian Wiedenroth (License 6597)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@412480 65c4cc65-6c06-0410-ace0-fbb531ad65f3
---
r411189 | jrose | 2014-03-26 10:50:48 -0500 (Wed, 26 Mar 2014) | 12 lines
chan_sip: Send real CallerID information with P-Assserted-Identity (RFC-3325)
Prior to this patch, the P-Asserted-Identity header would include anonymous
caller id information which seems to go against the point of the
P-Asserted-Identity header. Now the real caller ID information will be
included in this header. Also, no privacy header would be included.
This patch adds 'Privacy: id' to outgoing SIP messages that include the
P-Asserted-Identity header.
(closes issue AST-1301)
---
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@412328 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
Review: https://reviewboard.asterisk.org/r/3377/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@412114 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add notice messages during execution that the -I command line option and
the astersik.conf internal_timing option are no longer needed. The
internal timing functionality is now always enabled if there is a timing
module loaded.
NOTE: Since the command line options and the asterisk.conf config file are
processed before the logging system is initialized, the messages are
output to stderr.
Change requested as a result of asterisk-dev list comments about the
commit for ASTERISK-22846 that removed the -I and internal_timing options.
Review: https://reviewboard.asterisk.org/r/3423/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@411964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@411715 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch causes realtime queue members to remain in queues during the reload process. Previously these
members would be removed causing any waiting callers to be ejected from the queue with a reason of "EXITEMPTY".
ASTERISK-23547 #close
ASTERISK-23547 #comment Patch app_queue_fix_realtime_reload_1.8_trunk.patch submitted by Italo Rossi (license 6409)
Review: https://reviewboard.asterisk.org/r/3404/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@411584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch works around a problem with the HTTP body
being dropped from the response to a specific client
and under specific circumstances:
a) Client request comes from node.js user agent
"Shred" via use of swagger-client library.
b) Asterisk and Client are *not* on the same
host or TCP/IP stack
In testing this problem, it has been determined that
the write of the HTTP body is lost, even if the data
is written using low level write function. The only
solution found is to instruct the TCP stack with the
shutdown function to flush the last write and finish
the transmission. See review for more details.
ASTERISK-23548 #close
(closes issue ASTERISK-23548)
Reported by: Sam Galarneau
Review: https://reviewboard.asterisk.org/r/3402/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@411462 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes setting nullable integer columns to NULL instead of an empty
string, which fails for PostgreSQL, for example. The current code is supposed
to do so, but the check is broken. The patch also allows the first column in
the list to be a nullable integer.
This patch also adds a compatibility setting in res_odbc.conf,
allow_empty_string_in_nontext. It is enabled by default. It should be disabled
for database backends (such as PostgreSQL) that require NULL instead of an
empty string for Integer columns.
Review: https://reviewboard.asterisk.org/r/3375
(issue ASTERISK-23459)
Reported by: zvision
patches:
res_config_odbc.diff uploaded by zvision (License 5755)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@411399 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The allowed methods advertised by chan_sip did not previously note the MESSAGE
request. Even in Asterisk 1.8, we do accept in-dialog MESSAGE requests; we
should advertise that we support MESSAGE requests.
ASTERISK-23504 #close
ASTERISK-23504 #comment Reported by: Martin Kontsek
ASTERISK-23504 #comment Patch sip.h_patch.diff uploaded by Martin Kontsek (license 6587)
Review: https://reviewboard.asterisk.org/r/3396/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@411372 65c4cc65-6c06-0410-ace0-fbb531ad65f3
