Issue #14359 was fixed between the time that I posted the review of the backport
of the state interface change for 1.4. This merges the changes from that issue
back into 1.4.
(closes issue #14359)
Reported by: francesco_r
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@185298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(This is copied and pasted from the review request I made for this patch)
Asterisk has some odd behavior when queue weights are used. The current logic used when
potentially calling a queue member is:
If the member we are going to call is part of another queue and _that other queue has any
callers in it_ and has a higher weight than the queue we are calling from, then don't try
to contact that member. The issue here is what I have marked with underscores. If the
higher-weighted queue has any callers in it at all, then the queue member will be unreachable
from the lower-weighted queue. This has the potential to be really really bad if using a
queue strategy, such as leastrecent or fewestcalls, with the potential to call the same
member repeatedly.
The fix proposed by garychen on issue 13220 is very simple and, as far as I can see, works
well for this situation. With this set of changes, the logic used becomes:
If the member we are going to call is part of another queue, the other queue has a higher
weight than the queue we are calling from, and the higher weight queue has at least as many
callers as available members, then do not try to contact the queue member. If the higher
weighted queue has fewer callers than available members, then there is no reason to deny
the call to this member since the other queue can afford to spare a member.
Since the fix involved writing a generic function for determining the number of available
members in the queue, I also modified the is_our_turn function to make use of the new
num_available_members function to determine if it is our turn to try calling a member. There
is one small behavior change. Before writing this patch, if you had autofill disabled, then
if you were the head caller in a queue, you would automatically be told that it was your
turn to try calling a member. This did not take into account whether there were actually any
queue members available to take the call. Now we actually make sure there is at least one
member available to take the call if autofill is disabled.
(closes issue #13220)
Reported by: garychen
Review: http://reviewboard.digium.com/r/202/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@185031 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After several issues raised on the Asterisk bugtracker against
the 1.4 branch were determined to be fixable with the state interface
change available in the 1.6.X series, it finally came time to just
suck it up and backport the change.
For a detailed explanation of what this change entails, the original
trunk commit for this feature may be found here:
http://svn.digium.com/view/asterisk?view=revision&revision=97203
In addition, the details for the use of this change to fix the problems
stated in issue #12970 may be found in the review request I made for
this change. It is linked below.
(closes issue #12970)
Reported by: edugs15
Review: http://reviewboard.digium.com/r/116
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@184980 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_test was failing when sending the last DTMF digit, 8, because of the 100ms pause issued after DTMF is sent. During this pause the other side would hang up causing the test to look like it failed. Now the other side waits a second before hanging up.
(closes issue #12442)
Reported by: tzafrir
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@184388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The 'digit' variable is guaranteed to be non-NULL, so the if
statement could never evaluate true. Changing to ast_strlen_zero
makes the logic correct.
This was found while reviewing ast_channel_ao2 code review.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@184078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Initialized ast_call_feature in detect_disconnect to avoid accessing uninitialized memory. Cleaned up /param tags in features.h. No longer send dynamic features in ast_feature_detect.
issue #11583
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@183386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
feature.conf has a disconnect option. By default this option is set to '*', but it could be anything. If a user wishes to disconnect a call before the other side answers, only '*' will work, regardless if the disconnect option is set to something else. This is because features are unavailable until bridging takes place. The default disconnect option, '*', was hardcoded in app_dial, which doesn't make any sense from a user perspective since they may expect it to be something different. This patch allows features to be detected from outside of the bridge, but not operated on. In this case, the disconnect feature can be detected before briding and handled outside of features.c.
(closes issue #11583)
Reported by: sobomax
Patches:
patch-apps__app_dial.c uploaded by sobomax (license 359)
11583.latest-patch uploaded by murf (license 17)
detect_disconnect.diff uploaded by dvossel (license 671)
Tested by: sobomax, dvossel
Review: http://reviewboard.digium.com/r/195/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@183126 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@182810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With these changes, for a module to export symbols into the global namespace, it must have *both* the AST_MODFLAG_GLOBAL_SYMBOLS flag and a linker script that allows the linker to leave the symbols exposed in the module's .so file (see res_odbc.exports for an example).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@182802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The main problem here was that cstdlib was undefining free thereby causing the
proper debug macros to not be used. ast_h323.cxx has been changed to call
ast_free instead to avoid the issue. Because using the ast prefix calls are
a better choice, ast_free_ptr is the new wrapper for free to pass to functions.
Also, a little bit of clean up was done to avoid the debug macros intentionally
being redefined.
(closes issue #13593)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@181133 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was a fix put in a while back so that an X-Asterisk-VM-Context message header was
added to stored IMAP voicemails. This would allow for us to differentiate if the same
mailbox name was used in multiple contexts. The problem still left was that not all places
where messages were retrieved actually attempted to use this header for information when
retrieving messages. This commit fixes that so that MWI and message retrieval from VoiceMailMain
work as expected.
(closes issue #13853)
Reported by: vicks1
Patches:
13853_v2.patch uploaded by mmichelson (license 60)
Tested by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@180464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using the searchcontexts option in voicemail.conf, the code
made the assumption that all mailbox names defined were unique across
all contexts. However, the code did nothing to actually enforce this
assumption, nor did it do anything to alert a user that he may have
created an ambiguity in his voicemail.conf file by defining the same
mailbox name in multiple contexts.
With this change, we now will issue a nice long warning if searchcontexts
is on and we encounter the same mailbox name in multiple contexts and ignore
any duplicates after the first box. Whether searchcontexts is enabled or not,
if we come across a duplicate mailbox in the same context, then we will issue
a warning and ignore the duplicated mailbox. I have also added a small note
to voicemail.conf.sample in the explanation for searchcontexts explaining
that you cannot define the same mailbox in multiple contexts if you have
enabled the option.
(closes issue #14599)
Reported by: lmadsen
Patches:
14599.patch uploaded by mmichelson (license 60) (with slight modification)
Tested by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@180380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It had always been possible to explicitly specify a "blank"
value for a sound file in queues.conf and have no sound played
back. The problem with this is that it would result in some ugly
CLI warnings from file.c.
This commit introduces a check when playing a file in app_queue
to see if the name of the file is zero-length and return early if
that is the case. Also, the ability to specify the blank sound
files in queues.conf is now mentioned more clearly in queues.conf.sample
(closes issue #14227)
Reported by: caspy
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@180006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This call to ast_waitfor() was being done way too soon in this section of code.
Specifically, there was code in between the call to waitfor and the code that
uses the result that puts the channel in autoservice. By putting the channel
in autoservice, the previous results of ast_waitfor() become meaningless,
as the autoservice thread will do it's own ast_waitfor() and ast_read()
on the channel.
So, when we came back out of autoservice and eventually hit the block of code
that calls ast_read() on the channel, there may not actually be any input on
the channel available. Even though the previous call to ast_waitfor() in
app_meetme said there was input, the autoservice thread has since serviced
the channel for some period of time.
This bug manifested itself while dvossel was doing some testing of MeetMe in
Asterisk trunk. He was using the timerfd timing module. When the code hit
ast_read() erroneously, it determined that it must have been called because of
input on the timer fd, as chan->fdno was set to AST_TIMING_FD, since that was
the cause of the last legitimate call to ast_read() done by autoservice.
In this test, an IAX2 channel was calling into the MeetMe conference. It was
_much_ more likely to be seen with an IAX2 channel because of the way audio
is handled. Every audio frame that comes in results in a call to
ast_queue_frame(), which then uses ast_timer_enable_continuous() to notify
the channel thread that a frame is waiting to be handled. So, the chances
of ast_waitfor() indicating that a channel needs servicing due to a timer
event on an IAX2 event is very high.
Finally, it is interesting to note that if a different timing interface was
being used, this bug would probably not be noticed. When ast_read() is called
and erroneously thinks that there is a timer event to handle, it calls the
ast_timer_ack() function. The pthread and dahdi timing modules handle the
ack() function being called when there is no event by simply ignoring it.
In the case of the timerfd module, it results in a read() on the timer fd
that will block forever, as there is no data to read. This caused Asterisk
to lock up very quickly.
Thanks to dvossel and mmichelson for the fun debugging session. :-)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@179532 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Apparently on FreeBSD, attempting to set the O_NONBLOCKING flag separately
from opening the file was causing an "inappropriate ioctl for device" error.
While I cannot fathom why this would be happening, I certainly am not opposed
to making the code a bit more compact/efficient if it also fixes a bug.
(closes issue #14482)
Reported by: ys
Patches:
meetme.patch uploaded by ys (license 281)
Tested by: ys
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@176249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If calling into VoiceMailMain when using IMAP storage, it was
possible to crash Asterisk by hanging up the phone when prompted
for a voicemail mailbox. This patch fixes the issue.
While it may appear that this patch is superficial, it allows code
execution to continue to the failure case just below the IMAP_STORAGE
code block where this patch has been applied
(closes issue #14473)
Reported by: dwpaul
Patches:
voicemail_imap_crash_no_mailbox.patch uploaded by dwpaul (license 689)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@175590 65c4cc65-6c06-0410-ace0-fbb531ad65f3
issue #13363 (related to issue #6176). When a hangup occurs during a Macro
execution in earlier 1.4, the h extension would execute within the Macro
context, whereas it was always supposed to execute only within the main context
(where Macro was called). So this fix checks for an "h" extension in the
deepest macro context where a hangup occurred; if it exists, that "h" extension
executes, otherwise the main context "h" is executed.
(closes issue #14122)
Reported by: wetwired
Patches:
20090210__bug14122.diff.txt uploaded by Corydon76 (license 14)
Tested by: andrew
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@174885 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new option is "imapvmshareid" which is an ID to tag multiple mailboxes
using the same IMAP storage location to function as one mailbox. This allows
all messages to be retrieved for any user in the group. The patch alters the
'X-Asterisk-VM-Extension' header that is responsible for matching voicemails
for a given user.
(closes issue #13673)
Reported by: howardwilkinson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@173696 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Specifically, this patch prevents us from autopausing members when
we receive a busy or congestion frame from them.
(closes issue #14376)
Reported by: fiddur
Patches:
14376.patch uploaded by putnopvut (license 60)
Tested by: fiddur
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@173692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_mixmonitor runs its own thread to monitor the channel's activity and write the mixed
audio to a file. Since this thread runs independently of the channel, it is possible that
the mixmonitor thread's channel pointer will point to freed memory when the channel either
is masqueraded or hangs up (technically, both cases are hangups, but we need to handle the
cases slightly differently).
The solution for this is to employ a datastore, which has the nice benefit of allowing us
to hook into channel masquerades and hangups and update our pointer as necessary. If this
looks familiar, this same technique is employed in app_chanspy. app_chanspy is a bit more
involved since it does a lot more operations on the channel that is being spied upon.
app_mixmonitor does have an extra touch that app_chanspy doesn't have, though. Since there
is a thread race between the channel's thread and the mixmonitor thread on a hangup, we em-
ploy a condition-and-boolean combination to ensure that the channel thread finishes with
our structure before the mixmonitor thread attempts to free it. No crashes!
(closes issue #14374)
Reported by: aragon
Patches:
14374.patch uploaded by putnopvut (license 60)
Tested by: aragon, putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@173559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using builtin features like parking and transfers, the AST_FEATURE_* flags
would not be set correctly for all instances when either performing a builtin
attended transfer, or parking a call and getting the timeout callback. Also,
there was no way on a per-call basis to specify what features someone should
have on picking up a parked call (since that doesn't involve the Dial() command).
There was a global option for setting whether or not all users who pickup a
parked call should have AST_FEATURE_REDIRECT set, but nothing for DISCONNECT,
AUTOMON, or PARKCALL.
This patch:
1) adds the BRIDGE_FEATURES dialplan variable which can be set either in the
dialplan or with setvar in channels that support it. This variable can be set
to any combination of 't', 'k', 'w', and 'h' (case insensitive matching of the
equivalent dial options), to set what features should be activated on this
channel. The patch moves the setting of the features datastores into the
bridging code instead of app_dial to help facilitate this.
2) adds global options parkedcallparking, parkedcallhangup, and
parkedcallrecording to be similar to the parkedcalltransfers option for
globally setting features.
3) has builtin_atxfer call builtin_parkcall if being transfered to the parking
extension since tracking everything through multiple masquerades, etc. is
difficult and error-prone
4) attempts to fix all cases of return calls from parking and completed builtin
transfers not having the correct permissions
(closes issue #14274)
Reported by: aragon
Patches:
fix_feature_inheritence.diff.txt uploaded by otherwiseguy (license 396)
Tested by: aragon, otherwiseguy
Review http://reviewboard.digium.com/r/138/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@172517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk runs as a non-root user and the administrator does a 'restart now',
Asterisk loses the ability to set QOS on packets.
(closes issue #14004)
Reported by: nemo
Patches:
20090105__bug14004.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@172438 65c4cc65-6c06-0410-ace0-fbb531ad65f3
situations.
What it does:
1. A new Flag value is defined in include/asterisk/channel.h,
AST_FLAG_BRIDGE_HANGUP_DONT, which used as a messenge to the
bridge hangup exten code not to run the h-exten there (nor
publish the bridge cdr there). It will done at the pbx-loop
level instead.
2. In the manager Redirect code, I set this flag on the channel
if the channel has a non-null pbx pointer. I did the same for the
second (chan2) channel, which gets run if name2 is set...
and the first succeeds.
3. I restored the ending of the cdr for the pbx loop h-exten
running code. Don't know why it was removed in the first place.
4. The first attempt at the fix for this bug was to place code
directly in the async_goto routine, which was called from a
large number of places, and could affect a large number of
cases, so I tested that fix against a fair number of transfer
scenarios, both with and without the patch. In the process,
I saw that putting the fix in async_goto seemed not to affect
any of the blind or attended scenarios, but still, I was
was highly concerned that some other scenarios I had not tested
might be negatively impacted, so I refined the patch to
its current scope, and jmls tested both. In the process, tho,
I saw that blind xfers in one situation, when the one-touch
blind-xfer feature is used by the peer, we got strange
h-exten behavior. So, I inserted code to swap CDRs and
to set the HANGUP_DONT field, to get uniform behavior.
5. I added code to the bridge to obey the HANGUP_DONT flag,
skipping both publishing the bridge CDR, and running
the h-exten; they will be done at the pbx-loop (higher)
level instead.
6. I removed all the debug logs from the patch before committing.
7. I moved the AUTOLOOP set/reset in the h-exten code in res_features
so it's only done if the h-exten is going to be run. A very
minor performance improvement, but technically correct.
(closes issue #14241)
Reported by: jmls
Patches:
14241_redirect_no_bridgeCDR_or_h_exten_via_transfer uploaded by murf (license 17)
Tested by: murf, jmls
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@172030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The queue_transfer_fixup function was searching for and removing
the datastore from the incorrect channel, so this was fixed.
* Most datastore operations regarding the queue_transfer datastore
were being done without the channel locked, so proper channel locking
was added, too.
(closes issue #14086)
Reported by: ZX81
Patches:
14086v2.patch uploaded by putnopvut (license 60)
Tested by: ZX81, festr
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@168628 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The number of available slots for calls in app_page was hardcoded to 128.
Proper bounds checking was not in place to enforce this limit, so if more than
128 extensions were passed to the Page() app, Asterisk would crash. This patch
instead dynamically allocates memory for the ast_dial structures and removes
the (non-functional) arbitrary limit.
This issue would have special importance to anyone who is dynamically creating
the argument passed to the Page application and allowing more than 128
extensions to be added by an outside user via some external interface.
The patch posted by a_villacis was slightly modified for some coding guidelines
and other cleanups. Thanks, a_villacis!
(closes issue #14217)
Reported by: a_villacis
Patches:
20080912-asterisk-app_page-fix-buffer-overflow.patch uploaded by a (license 660)
Tested by: otherwiseguy
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@168593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These changes eliminate the need for (and use of)
the KEEPALIVE return code in res_features.c;
There are other places that use this result code
for similar purposes at a higher level, these appear
to be left alone in 1.4, but attacked in trunk.
The reason these changes are being made in 1.4, is
that parking ends a channel's life, in some situations,
and the code in the bridge (and some other places),
was not checking the result code properly, and dereferencing
the channel pointer, which could lead to memory corruption
and crashes.
Calling the masq_park function eliminates this danger
in higher levels.
A series of previous commits have replaced some parking calls
with masq_park, but this patch puts them ALL to rest,
(except one, purposely left alone because a masquerade
is done anyway), and gets rid of the code that tests
the KEEPALIVE result, and the NOHANGUP_PEER result codes.
While bug 13820 inspired this work, this patch does
not solve all the problems mentioned there.
I have tested this patch (again) to make sure I have
not introduced regressions.
Crashes that occurred when a parked party hung up
while the parking party was listening to the numbers
of the parking stall being assigned, is eliminated.
These are the cases where parking code may be activated:
1. Feature one touch (eg. *3)
2. Feature blind xfer to parking lot (eg ##700)
3. Run Park() app from dialplan (eg sip xfer to 700)
(eg. dahdi hookflash xfer to 700)
4. Run Park via manager.
The interesting testing cases for parking are:
I. A calls B, A parks B
a. B hangs up while A is getting the numbers announced.
b. B hangs up after A gets the announcement, but
before the parking time expires
c. B waits, time expires, A is redialed,
A answers, B and A are connected, after
which, B hangs up.
d. C picks up B while still in parking lot.
II. A calls B, B parks A
a. A hangs up while B is getting the numbers announced.
b. A hangs up after B gets the announcement, but
before the parking time expires
c. A waits, time expires, B is redialed,
B answers, A and B are connected, after
which, A hangs up.
d. C picks up A while still in parking lot.
Testing this throroughly involves acting all the permutations
of I and II, in situations 1,2,3, and 4.
Since I added a few more changes (ALL references to KEEPALIVE in the bridge
code eliimated (I missed one earlier), I retested
most of the above cases, and no crashes.
H-extension weirdness.
Current h-extension execution is not completely
correct for several of the cases.
For the case where A calls B, and A parks B, the
'h' exten is run on A's channel as soon as the park
is accomplished. This is expected behavior.
But when A calls B, and B parks A, this will be
current behavior:
After B parks A, B is hung up by the system, and
the 'h' (hangup) exten gets run, but the channel
mentioned will be a derivative of A's...
Thus, if A is DAHDI/1, and B is DAHDI/2,
the h-extension will be run on channel
Parked/DAHDI/1-1<ZOMBIE>, and the
start/answer/end info will be those
relating to Channel A.
And, in the case where A is reconnected to
B after the park time expires, when both parties
hang up after the joyful reunion, no h-exten
will be run at all.
In the case where C picks up A from the
parking lot, when either A or C hang up,
the h-exten will be run for the C channel.
CDR's are a separate issue, and not addressed
here.
As to WHY this strange behavior occurs,
the answer lies in the procedure followed
to accomplish handing over the channel
to the parking manager thread. This procedure
is called masquerading. In the process,
a duplicate copy of the channel is created,
and most of the active data is given to the
new copy. The original channel gets its name
changed to XXX<ZOMBIE> and keeps the PBX
information for the sake of the original
thread (preserving its role as a call
originator, if it had this role to begin
with), while the new channel is without
this info and becomes a call target (a
"peer").
In this case, the parking lot manager
thread is handed the new (masqueraded)
channel. It will not run an h-exten
on the channel if it hangs up while
in the parking lot. The h exten will
be run on the original channel instead,
in the original thread, after the bridge
completes.
See bug 13820 for our intentions as
to how to clean up the h exten behavior.
Review: http://reviewboard.digium.com/r/29/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@166093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: tzafrir
Replace a bunch of if defined checks for Zaptel/DAHDI through several new defines in dahdi_compat.h. This removes a lot of code duplication. Example from bug:
#ifdef HAVE_ZAPTEL
fd = open("/dev/zap/pseudo", O_RDWR);
#else
fd = open("/dev/dahdi/pseudo", O_RDWR);
#endif
is replaced with:
fd = open(DAHDI_FILE_PSEUDO, O_RDRW);
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@165991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch resolved some random crash issues observed by a user on a BSD system
(closes issue #14111)
Reported by: ys
Patches:
app_chanspy.c.diff uploaded by ys (license 281)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@165889 65c4cc65-6c06-0410-ace0-fbb531ad65f3
