When overlap dialing is enabled, the lack of inband audio available
information in the SETUP_ACKNOWLEDGE events causes an interoperability
problem with SIP. sig_pri doesn't know if there is dialtone present when
a SETUP_ACKNOWLEDGE is received so it assumes it is there and posts an
AST_CONTROL_PROGRESS frame. The SIP channel driver then sends out a 183
Session Progress and blocks the desired 180 Ringing message when the
ALERTING message comes in.
* Made the configure script detect if the installed version of libpri
supports the SETUP_ACKNOWLEDGE enhancements.
* Using the new API, made generate an AST_CONTROL_PROGRESS frame on an
incoming SETUP_ACKNOWLEDGE message when the message indicates inband audio
is present instead of assuming that dialtone is present.
* Using the new API, made SETUP_ACKNOWLEDGE send out an inband audio
available indication only if dialtone is expected. The change also makes
the fallback behaviour of sending the PROGRESS message better by sending
it only if dialtone is expected.
* Changed receiving a PROCEEDING message to not generate an
AST_CONTROL_PROGRESS frame if the progress indication ie indicates
non-end-to-end-ISDN. This helps interoperability with SIP.
* Changed sending a PROCEEDING message in response to an
AST_CONTROL_PROCEEDING frame to not indicate inband audio available. It
was silly to do so anyway because the channel driver doesn't know if
inband audio is even available. This helps interoperability with SIP.
This patch and a corresponding change in libpri work together to allow
Asterisk to control the inband audio available progress indication ie on
the SETUP_ACKNOWLEDGE message when dialtone is present.
AST-1338 #close
Reported by: Tyler Stewart
Review: https://reviewboard.asterisk.org/r/3521/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@413714 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When nanosecond time resolution was added for identifying config file
changes, it didn't cover all of the myriad of ways that one might obtain
nanosecond time resolution off of struct stat.
Rather than complicate the #if even further figuring out one system from
the next, this patch directly tests for the three struct members I know
about today, and #ifdef's accordingly.
Review: https://reviewboard.asterisk.org/r/3273/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@409833 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's RADIUS module currently build against libradiusclient-ng, but this
project has been superseeded by libfreeradius-client. The API is 99% compatible
except that the header name has changed, the library name has changed, and
the configuration file location has changed.
(closes issue ASTERISK-22980)
Reported by: Jeremy Lainé
Patches:
freeradius-client.patch uploaded by sharky (license 6561)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@406801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to use nested functions on some versions of GCC (e.g. GCC on OS X),
the -fnested-functions flag must be passed to the compiler. This patch adds
detection logic to ./configure to add the flag if necessary.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@402192 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When running configure, libiodbc2 development headers will fulfill the
requirement for ODBC development headers, but will not function
properly. This adds a warning when libiodbc2 development headers are
detected instead of unixodbc development headers.
(closes issue ASTERISK-22459)
Reported by: Patrick Maille
Tested by: Walter Doekes
Patches:
issueA22459_warn_when_using_iodbc.patch uploaded by Walter Doekes (License 5674)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@400767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-17842, some additional library checks were added to the configure
script so that the bfd library could be found on CentOS and Fedora systems.
As it turns out, openSUSE requires an additional library. This patch adds
another check to the configure script for openSUSE that will add that library.
Review: https://reviewboard.asterisk.org/r/2885/
(closes issue AST-1169)
Reported by: Guenther Kelleter
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@400073 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk was a little too pro-active in claiming that it found launchd. On
systems without launchd - such as FreeBSD - this resulted in certain items
in Asterisk that conflict with launchd to not be selectable, such as
res_timing_kqueue.
(closes issue ASTERISK-20749)
Reported by: Oleg Baranov
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@381847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Building Asterisk on Raspbian with hard-float support fails as it uses the
string 'linux-gnueabihf' for host os, as opposed to 'linux-gnueabi'. This patch
modifies the configure script for Asterisk such that it will match on any
string beginning with 'linux-gnueabi', as opposed to requiring an explicit
match.
(closes issue ASTERISK-21006)
Reported by: Christian Hesse
Tested by: Christian Hesse
patches:
linux-gnueabihf.patch uploaded by Christian Hesse (license 6459)
linux-gnueabihf-autoconf.patch uploaded by Christian Hesse (license 6459)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@380520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Make git more attractive for managing work-in-progress. Especially
convenient when a potential patch set needs to be tested on multiple
platforms since one can use git to keep all the test environments in sync
independent of a subversion server.
Now the Asterisk version will show the exact git SHA5 that was used when
building (still appended by "M" if there are local modifications) from a
git clone of the Asterisk repository so the developer can more easily know
what is actually under test.
You will now get this:
$ asterisk -V
Asterisk GIT-1698298
Instead of this:
$ asterisk -V
Asterisk UNKNOWN__and_probably_unsupported
This has zero impact for those not using git with the exception of an
extra test in the configure script to gather git's path. This is
necessary to prevent "sudo make install" from failing since git may not be
in the path in make's shell environment.
(closes issue ASTERISK-20483)
Reported by: Shaun Ruffell
Patches:
0001-build_tools-Allow-Asterisk-to-report-git-SHAs-in-ver.patch (license #5417) patch uploaded by Shaun Ruffell
Modified
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375189 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change to the build system rips out any usage of PROC along with
architecture-specific optimizations in favor of using -march=native where it is
supported. This fixes broken builds on 64bit Intel systems and results in
better optimized code on systems running GCC 4.2+.
Review: https://reviewboard.asterisk.org/r/1852/
(closes issue ASTERISK-19462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@361955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The principle difference between libvorbisfile v1.1.2 and newer (at least
v1.2.0) is the addition of the predefined callbacks OV_CALLBACKS_xxx in
vorbis/vorbisfile.h used for ov_open_callbacks().
* Updated the configure script to detect if libvorbisfile.h declares
OV_CALLBACKS_NOCLOSE.
* Copied the declaration of OV_CALLBACKS_NOCLOSE from v1.2.0 to allow
v1.1.2 to compile.
(closes issue ASTERISK-19370)
Reported by: Jonn Taylor
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ogg/vorbis was fairly useless as a voicemail file format because it did
not implement the seek and tell format callbacks among other problems.
Since we were already using the libvorbis and libvorbisenc libraries we
can use libvorbisfile as it is also part of the vorbis library package.
* Made use the libvorbisfile to handle the ogg/vorbis file stream. The
format_ogg_vorbis.c is now mostly a wrapper around libvorbisfile.
(closes issue ASTERISK-16926)
Reported by: sque
Patches:
ogg_vorbis_use_libvorbisfile.patch (license #6108) patch uploaded by sque
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@355365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Recent versions of autoconf (2.68 on my system) won't properly process the configure
script unless every call to AC_LANG_PROGRAM is m4-quoted. Many calls in the script
were, but many were not. This patch corrects the unquoted calls.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@350837 65c4cc65-6c06-0410-ace0-fbb531ad65f3
OpenBSD defines SO_PEERCRED, but it returns a 'struct sockpeercred', not
'struct ucred', which causes compilation of main/asterisk.c to fail in
read_credentials(). This allows configure to check for sockpeercred and
asterisk to deal with it properly.
(closes issue ASTERISK-18929)
Reported-by: Barry Miller
Patch-by: Barry Miller
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@350730 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Support weak symbols on a platform specific basis. The Mac OS X (Darwin)
support must be isolated from the other platforms because it has caused
other platforms to crash. Several other platforms including Linux have
GCC versions that define the weak attribute. However, this attribute is
only setup for use in the code by Darwin.
(closes issue ASTERISK-18728)
Reported by: Ben Klang
Review: https://reviewboard.asterisk.org/r/1617/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@348647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
JIRA AST-598 added the PRI_L2_PERSISTENCE option to fix BRI PTMP TE layer
2 persistence issues with some telcos. ASTERISK-18535 attempted to fix
the unexpected requirement that libpri *must* have that feature to work
with Asterisk. The AST_EXT_LIB_SETUP_DEPENDENT lines made the PRI
optional features required. Unfortunately, I thought
AST_EXT_LIB_SETUP_DEPENDENT didn't do anything useful for libpri and
deleted those lines for libpri. The result was the HAVE_PRI_xxx defines
that control the ability to use optional libpri features were also
deleted.
* Created AST_EXT_LIB_SETUP_OPTIONAL configuration macro to allow optional
features in a library that the source code could take advantage of if the
code supports the feature.
(closes issue ASTERISK-18687)
Reported by: Norbert
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@339719 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Makefile workaround for 10.6 extended to work on 10.7 and later.
* Now uses the 'weak' symbol for Lion systems, which no longer support
'weak_import'
Closes ASTERISK-17612.
Closes ASTERISK-18213.
Tested by: tilghman, oej.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@336733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Using the --with-pri option with the configure script generated an error
about not having PRI_L2_PERSISTENCE if you did not have the absolute
latest libpri SVN checkout installed.
The AST_EXT_LIB_SETUP_DEPENDENT macro in the configure.ac script seems to
be for libraries that are dependent upon other libraries and not
necessarily for optional/added features within a library.
(closes issue ASTERISK-18535)
Reported by: Michael Keuter
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@335911 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was initially added to 1.8 prior to release, primarily to support the
standard paths on Mac OS X, but was partially reverted recently in Subversion,
due to the lack of support for spaces in DESTDIR. This commit restores support
for the standard paths on Mac OS X, and also includes support for spaces in
DESTDIR.
(closes issue ASTERISK-18290)
Reported by: pabelanger
Review: https://reviewboard.asterisk.org/r/1326/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@332355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
France Telecom brings layer 2 and layer 1 down on BRI lines when the line
is idle. When layer 1 goes down Asterisk cannot make outgoing calls and
the HA8 and HB8 cards also get IRQ misses.
The inability to make outgoing calls is because the line is in red alarm
and Asterisk will not make calls over a line it considers unavailable.
The IRQ misses for the HA8 and HB8 card are because the hardware is
switching clock sources from the line which just brought layer 1 down to
internal timing.
There is a DAHDI option for the B410P card to not tell Asterisk that layer
1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp
teignored=1". There is a similar DAHDI option for the HA8 and HB8 cards:
"modprobe wctdm24xxp bri_teignored=1". Unfortunately that will not clear
up the IRQ misses when the telco brings layer 1 down.
* Add layer 2 persistence option to customize the layer 2 behavior on BRI
PTMP lines. The new option has three settings: 1) Use libpri default
layer 2 setting. 2) Keep layer 2 up. Bring layer 2 back up when the peer
brings it down. 3) Leave layer 2 down when the peer brings it down.
Layer 2 will be brought up as needed for outgoing calls.
JIRA AST-598
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@332264 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309251 | tilghman | 2011-03-01 19:06:02 -0600 (Tue, 01 Mar 2011) | 7 lines
Revert previous 2 commits, and instead conditionally redefine the same macro used in flex 2.5.35 that clashed with our workaround.
Not surprisingly, the workaround was exactly the same code as was provided by
the Flex maintainers, albeit in two different places, in different macros.
This should fix the FreeBSD builds, which have an older version of Flex.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309033 | tilghman | 2011-02-28 04:43:12 -0600 (Mon, 28 Feb 2011) | 4 lines
A later version of flex already includes the fwrite workaround code, which if used twice causes a compilation error.
Detect whether Flex will compile without the workaround; if so, suppress our workaround code.
........
r309034 | tilghman | 2011-02-28 05:07:52 -0600 (Mon, 28 Feb 2011) | 2 lines
Clarify meaning, removing double negative (stupid!)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309035 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r304465 | qwell | 2011-01-27 11:01:24 -0600 (Thu, 27 Jan 2011) | 16 lines
Merged revisions 304464 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r304464 | qwell | 2011-01-27 10:57:46 -0600 (Thu, 27 Jan 2011) | 9 lines
Fix default prefix=/usr regression on non-Linux systems.
This partially reverts a change made in branches/1.4/ r267759, which will
cause issue #17013 to be reopened. This issue was pointed out by a user
on #asterisk, who helpfully discovered that paths were being set incorrectly.
To truly understand what was wrong, one should run:
svn diff --force -c<this revision> configure
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@304466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r301220 | pabelanger | 2011-01-09 16:38:24 -0500 (Sun, 09 Jan 2011) | 14 lines
SOUND_CACHE_DIR now defaults to empty
Sounds files included in the Asterisk tarball were being ignored and
re-downloaded. Users wanting to cache the files can still override the setting
using the --with-sounds-cache option.
(closes issue #18589)
Reported by: pabelanger
Patches:
issue18589.patch uploaded by pabelanger (license 224)
Tested by: pabelanger
Review: https://reviewboard.asterisk.org/r/1074/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@301221 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@298960 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r296533 | tilghman | 2010-11-29 01:27:09 -0600 (Mon, 29 Nov 2010) | 13 lines
I love standards. There are so many to choose from. Except when there isn't one.
Linux and *BSD disagree on the elements within the ucred structure. Detect
which one is in use on the system.
(closes issue #18384)
Reported by: bjm
Patches:
cred-diffs uploaded by bjm (license 473)
20101127__issue18384__1.6.2.diff.txt uploaded by tilghman (license 14)
20101127__issue18384__1.8.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman, bjm
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@296534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
