This resolves a large number of compiler warnings from GCC 4.10 which
cause the build to fail under dev mode. The vast majority are
signed/unsigned mismatches in printf-style format strings.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@413586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
Review: https://reviewboard.asterisk.org/r/3377/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@412114 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add notice messages during execution that the -I command line option and
the astersik.conf internal_timing option are no longer needed. The
internal timing functionality is now always enabled if there is a timing
module loaded.
NOTE: Since the command line options and the asterisk.conf config file are
processed before the logging system is initialized, the messages are
output to stderr.
Change requested as a result of asterisk-dev list comments about the
commit for ASTERISK-22846 that removed the -I and internal_timing options.
Review: https://reviewboard.asterisk.org/r/3423/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@411964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@411715 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Even since the fixes of AST-2013-007, Asterisk prints the following
warning on startup if the user decided to live dangerously:
Privilege escalation protection disabled!
See https://wiki.asterisk.org/wiki/x/1gKfAQ for more details.
This message is intended for the logs and interactive startup. No need
for it to appear on a remote console. This commit removes it from there.
(closes issue ASTERISK-23084)
Review: https://reviewboard.asterisk.org/r/3101/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@404861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows individual dialplan functions to be marked as
'dangerous', to inhibit their execution from external sources.
A 'dangerous' function is one which results in a privilege escalation.
For example, if one were to read the channel variable SHELL(rm -rf /)
Bad Things(TM) could happen; even if the external source has only read
permissions.
Execution from external sources may be enabled by setting
'live_dangerously' to 'yes' in the [options] section of asterisk.conf.
Although doing so is not recommended.
(closes issue ASTERISK-22905)
Review: http://reviewboard.digium.internal/r/432/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@403913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also covers ast_app_parse_timelen-fail-zero-length.patch, but the patch was
replaced with one of my own.
(issue ASTERISK-22467)
Reported by: Corey Farrell
Patches:
chan_dahdi-cleanup_push.patch uploaded by coreyfarrell (license 5909)
clicompat-r2.patch uploaded by coreyfarrell (license 5909)
codecs-ilbc-doCPLC.patch uploaded by coreyfarrell (license 5909)
data-cleanup-test-registration.patch uploaded by coreyfarrell (license 5909)
main-asterisk-kill-listener.patch uploaded by coreyfarrell (license 5909)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@401704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If you've mistakenly put a space before typing in a command, the
leading space will be included as part of the command, and the command
parser will not find the corresponding command. This patch rectifies
that situation by stripping the leading spaces on commands.
Review: https://reviewboard.asterisk.org/r/2709/
Patch-by: Tilghman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@396745 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r376428 was commited to re-order start up sequences to be more tolerant of
forking with thread primitives, a few items were changed that caused changes
in behavior on some distros. This includes:
* Not displaying the splash screen on a remote console.
* Displaying an error message on stderr when a remote console cannot connect
to a running instance of Asterisk.
In the first case, the splash screen was re-added (thanks to Michael L. Young).
In the second case, the various init.d scripts were modified to pipe stderr
to /dev/null, as the error message is useful - if you execute a remote
console or a remote console command execution and it fail, it should tell
you. Note that the error message was always present, it just failed to be
printed prior to r376428.
Much thanks to the folks who quickly reported this problem, provided solutions,
and promptly tested the various init.d scripts on a variety of distros.
(closes issue ASTERISK-20945)
Reported by: Warren Selby
Tested by: Michael L. Young, Jamuel Starkey, kaldemar, Danny Nicholas, mjordan
patches:
asterisk-20945-remote-intro-msg.diff uploaded by elguero (license 5026)
ASTERISK-20945-1.8-mjordan.diff uploaded by mjordan (license 6283)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@379760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk forks itself into the background via a call to daemon, it must
re-set the pid value of the new process. Otherwise, astcanary gets the pid
value of the process before the fork, which prevents it from running. Asterisk
eventually starts lowering its priority, as it can no longer communicate
with the proverbial canary in the coal mine.
This patch ensures that the correct process identifier is used by astcanary.
(closes issue ASTERISK-20947)
Reported by: Jakob Hirsch
Tested by: mjordan
patches:
asterisk-10.12.0.astcanary_ppid.diff uploaded by Jakob Hirsch (license 6113)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@379509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Convert atexits list to a mutex instead of a rd/wr lock. The lock is
only write locked.
* Move CLI verbose Asterisk ending message to where AMI message is output
in really_quit() to avoid further surprises about using stuff already
shutdown.
(issue ASTERISK-20649)
Reported by: Corey Farrell
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Cleanup time zones on exit.
* Make exit clean/unclean report consistent for AMI and CLI in
really_quit().
(issue ASTERISK-20649)
Reported by: Corey Farrell
Patches:
core-cleanup-1_8-10.patch (license #5909) patch uploaded by Corey Farrell
core-cleanup-11-trunk.patch (license #5909) patch uploaded by Corey Farrell
Modified
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@377135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds the following CLI commands to control MALLOC_DEBUG reporting of
unreleased malloc memory when Asterisk is shut down.
memory atexit list on
memory atexit list off
memory atexit summary byline
memory atexit summary byfunc
memory atexit summary byfile
memory atexit summary off
* Made check all remaining allocated region blocks atexit for fence
violations.
* Increased the allocated region hash table size by about three times. It
still isn't large enough considering the number of malloced blocks
Asterisk uses.
* Made CLI "memory show allocations anomalies" use
regions_check_all_fences().
Review: https://reviewboard.asterisk.org/r/2196/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Although it is very rare and timing dependent, the potential exists for the
call to 'daemon' to cause what appears to be a deadlock in Asterisk during
startup. This can occur when a recursive mutex is obtained prior to the
daemon call executing. Since daemon uses fork to send the process into the
background, any threading primitives are unsafe to re-use after the call.
Implementations of pthread recursive mutexes are highly likely to store the
thread identifier of the thread that previously obtained the mutex. If
the mutex was locked prior to the fork, a subsequent unlock operation will
potentially fail as the thread identifier is no longer valid. Since the
mutex is still locked, all subsequent attempts to grab the mutex by other
threads will block.
This behavior exhibited itself most often when DEBUG_THREADS was enabled, as
this compile time option surrounds the mutexes in Asterisk with another
recursive mutex that protects the storage of thread related information. This
made it much more likely that a recursive mutex would be obtained prior to
daemon and unlocked after the call.
This patch does the following:
a) It backports a patch from Asterisk 11 that prevents the spawning of the
localtime monitoring thread. This thread is now spawned after Asterisk has
fully booted.
b) It re-orders the startup sequence to call daemon earlier during Asterisk
startup. This limits the potential of threading primitives being accessed
by initialization calls before daemon is called.
c) It removes calls to ast_verbose/ast_log/etc. prior to daemon being called.
Developers should send error messages directly to stderr prior to daemon,
as calls to ast_log may access recursive mutexes that store thread related
information.
d) It reorganizes when thread local storage is created for storing lock
information during the creation of threads. Prior to this patch, the
read/write lock protecting the list of threads in ast_register_thread would
utilize the lock in the thread local storage prior to it being initialized;
this patch prevents that.
On a very related note, this patch will *greatly* improve the stability of the
Asterisk Test Suite.
Review: https://reviewboard.asterisk.org/r/2197
(closes issue ASTERISK-19463)
Reported by: mjordan
Tested by: mjordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376428 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Makes malloc() behave like calloc(). It will return a memory block
filled with 0x55. A nonzero value.
* Makes free() fill the released memory block and boundary fence's with
0xdeaddead. Any pointer use after free is going to have a pointer
pointing to 0xdeaddead. The 0xdeaddead pointer is usually an invalid
memory address so a crash is expected.
* Puts the freed memory block into a circular array so it is not reused
immediately.
* When the circular array rotates out a memory block to the heap it checks
that the memory has not been altered from 0xdeaddead.
* Made the astmm_log message wording better.
* Made crash if the DO_CRASH menuselect option is enabled and something is
found.
* Fixed a potential alignment issue on 64 bit systems.
struct ast_region.data[] should now be aligned correctly for all
platforms.
* Extracted region_check_fences() from __ast_free_region() and
handle_memory_show().
* Updated handle_memory_show() CLI usage help.
Review: https://reviewboard.asterisk.org/r/2182/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard pointed out that having the manager dispose of itself gracefully
during shutdown meant that the Shutdown event will no longer get fired.
This patch moves the AMI event just prior to running the atexit callbacks.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@374230 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This replaces all calls to alloca() with ast_alloca() which calls gcc's
__builtin_alloca() to avoid BSD semantics and removes all NULL checks
on memory allocated via ast_alloca() and ast_strdupa().
(closes issue ASTERISK-20125)
Review: https://reviewboard.asterisk.org/r/2032/
Patch-by: Walter Doekes (wdoekes)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@370642 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@369001 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes to situations that could cause the CEL LINKEDID_END event to
be missed.
1) During a core stop gracefully, modules are unloaded when ast_active_channels
== 0. The LINKDEDID_END event fires during the channel destructor. This means
that occasionally, the cel_* module will be unloaded before the channel is
destroyed. It seemed generally useful to wait until the refcount of all
channels == 0 before unloading, so I added a channel counter and used it in the
shutdown code.
2) During a masquerade, ast_channel_change_linkedid is called. It calls
ast_cel_check_retire_linkedid which unrefs the linkedid in the linkedids
container in cel.c. It didn't ref the new linkedid. Now it does.
Review: https://reviewboard.asterisk.org/r/1900/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@367292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue ASTERISK-19758)
Reported by: Barry Miller
Tested by: Terry Wilson
Patches:
362758-diff uploaded by Barry Miller (license 5434)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@362868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk would accept multiple NULL-delimited CLI commands via the
netconsole socket, but would occasionally miss a command due to the
command not being completely read into the buffer. This patch ensures
that any partial commands get moved to the front of the read buffer,
appended to, and properly sent.
(closes issue ASTERISK-18308)
Review: https://reviewboard.asterisk.org/r/1876/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@362536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* chan_mobile: Fixed an overrun where the cind_state buffer (an integer array
of size 16) would be overrun due to improper bounds checking. At worst, the
buffer can be overrun by a total of 48 bytes (assuming 4-byte integers),
which would still leave it within the allocated memory of struct hfp. This
would corrupt other elements in that struct but not necessarily cause any
further issues.
* app_sms: The array imsg is of size 250, while the array (ud) that the data
is copied into is of size 160. If the size of the inbound message is
greater then 160, up to 90 bytes could be overrun in ud. This would corrupt
the user data header (array udh) adjacent to ud.
* chan_unistim: A number of invalid memmoves are corrected. These would move
data (which may or may not be valid) into the ends of these buffers.
* asterisk: ast_console_toggle_loglevel does not check that the console log
level being set is less then or equal to the allowed log levels of 32.
* frame: In ast_codec_pref_prepend, if any occurrence of the specified codec
is not found, the value used to index into the array pref->order would be
one greater then the maximum size of the array.
* jitterbuf: If the element being placed into the jitter buffer lands in the
last available slot in the jitter history buffer, the insertion sort attempts
to move the last entry in the buffer into one slot past the maximum length
of the buffer. Note that this occurred for both the min and max jitter
history buffers.
* tdd: If a read from fsk_serial returns a character that is greater then 32,
an attempt to read past one of the statically defined arrays containing the
values that character maps to would occur.
* localtime: struct ast_time and tm are not the same size - ast_time is larger,
although it contains the elements of tm within it in the same layout. Hence,
when using memcpy to copy the contents of tm into ast_time, the size of tm
should be used, as opposed to the size of ast_time.
* extconf: this treats ast_timing's minmask array as if it had a length of 48,
when it has defined the size of the array as 24. pbx.h defines minmask as
having a size of 48.
(issue ASTERISK-19668)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@362485 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a number of modules in main that did not handle the
negative return value from function calls adequately, or were not sufficiently
clear that the conditions leading to improper handling of the return values
could not occur. This includes:
* asterisk.c: A negative return value from the read function would be used
directly as an index into a buffer. We now check for success of the read
function prior to using its result as an index.
* manager.c: Check for failures in mkstemp and lseek when handling the
temporary file created for processing data returned from a CLI command in
action_command. Also check that the result of an lseek is sanitized prior
to using it as the size of a memory map to allocate.
* translate.c: Note in the appropriate locations where powerof cannot return
a negative value, due to proper checks placed on the inputs to that function.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@362359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
OpenBSD defines SO_PEERCRED, but it returns a 'struct sockpeercred', not
'struct ucred', which causes compilation of main/asterisk.c to fail in
read_credentials(). This allows configure to check for sockpeercred and
asterisk to deal with it properly.
(closes issue ASTERISK-18929)
Reported-by: Barry Miller
Patch-by: Barry Miller
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@350730 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Asterisk -x command line parameter is documented inconsistently.
* Made the -x documentation and behavior consistent.
* Since this is also a new year, updated the copyright notices while here.
(closes issue ASTERISK-19094)
Reported by: Eugene
Patches:
issueA19094_correct_asterisk_option_x.patch (license #5674) patch uploaded by Walter Doekes (modified)
Tested by: Eugene
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@350075 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When catching a signal, in no fork mode the console thread is identical to the thread
responsible for catching the signal and closing Asterisk, which requires it to first
dispense with the console thread. Prior to this patch, if these threads were identical,
upon receiving a killing signal, the thread will send an URG signal to itself, which
we also catch and then promptly do nothing with. Obviously this isn't useful behavior.
(closes issue ASTERISK-19127)
Reported By: Bryon Clark
Patches:
quit_on_signals.patch uploaded by Bryon Clark (license 6157)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@349672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
JIRA ASTERISK-17183
Multi-parkinglot directs calls to wrong parkinglot.
JIRA ASTERISK-17870
Cannot retrieve parked calls.
JIRA ASTERISK-17430
ParkedCall() with no extension should pickup first available call and does not.
JIRA AST-576
Issues with parking lots
* Removed searching for parking lots by extension. Parking lots can only
be found by the parking lot name since parking lot access extensions and
spaces are not guaranteed to be unique.
* Added parking_lot_name option to the Park and ParkedCall applications.
Updated documentation for Park and ParkedCall applications.
* Add parkext_exclusive configuration option to make parking entry
extensions specify which parking lot they access.
(closes issue ASTERISK-17183)
Reported by: David Cabrejos
Tested by: rmudgett, David Cabrejos
(closes issue ASTERISK-17870)
Reported by: Remi Quezada
(closes issue ASTERISK-17430)
Reported by: Philippe Lindheimer
JIRA ASTERISK-17452
Parking_offset not used
JIRA AST-624
'next' setting for findslot does nothing
* Reimplemented since findslot feature option broken by -r114655.
(closes issue ASTERISK-17452)
Reported by: David Woolley
Tested by: rmudgett
JIRA ASTERISK-15792
Dialplan continues execution after transfer to park.
This happens for DTMF attended transfer, DTMF blind transfer, and DTMF
one-touch-parking if the party initiating these features also initiated
the call.
* Fixed the return code from the affected builtin features when parking a
call.
(closes issue ASTERISK-15792)
Reported by: Mat Murdock
Tested by: rmudgett, twilson
JIRA AST-607
The courtesytone is not playing to the expected call when picking up a
parked call.
This is mostly a documentation problem. However, the option is not reset
to the default when features.conf is reloaded.
* Updated features.conf.sample documentation for courtesytone and
parkedplay options.
* Reset the parkedplay option to default when features.conf is reloaded.
JIRA AST-615
AMI Park action followed by features reload results in orphaned channels
in parking lot.
* Reloading features.conf will not touch parking lots that have calls
still parked in them. Reload again at a later time.
Misc additional fixes:
* Added unit test for parking lot dialplan usage checking.
* Made update connected line when a parked call is retrieved from a
parking lot.
* Made retrieved parked call stop ringing or MOH depending upon how the
call was waiting in the parking lot.
* Made CLI "features show" indicate if the parking lot is enabled for use.
* Added PARKINGDYNEXTEN channel variable to allow dynamic parking lots to
specify the parking lot access extension.
* Made AMI ParkedCalls action ParkedCall events have a Parkinglot header.
* Made AMI ParkedCalls action ParkedCallsComplete event have a Total
header.
* Fixed potential deadlock from AMI Park action holding channel locks
while calling masq_park_call().
* Fixed several places where ast_strdupa() were used inside of loops.
(Mostly fixed by refactoring the loop body into its own function.)
* Fixed copy_parkinglot() copying too much from the source parking lot.
Extracted the parking lot configuration settings into struct
parkinglot_cfg.
* Refactored courtesytone playing code to put the channel not playing the
tone in autoservice.
* Fix when pbx-parkingfailed is played that the other channel is put in
autoservice if it exists.
* Fixed parkinglot reference leak in parked_call_exec() error paths.
* Fixed parkinglot_unref() use of parkinglot after it was unreffed.
* Made destroy the struct ast_parkinglot parkings lock when done.
* Refactored the features.conf parking lot configuration code to eliminate
redundancy.
* Fixed feature reload to better protect parking lots.
* Fixed parking lot container reference leak in handle_parkedcalls().
* Fixed the total count in handle_parkedcalls().
Review: https://reviewboard.asterisk.org/r/1358/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@332100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In some cases when starting asterisk with -c and hitting control-c to shutdown, there will be an invalid read and null pointer deref causing a crash.
(closes issue ASTERISK-17927)
Reported by: Mark Murawski
Tested by: Mark Murawski, Kinsey Moore, Tilghman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@328593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is recommended by the POSIX standard, as well as by the sigaction(2) manpage
for various platforms that we support (e.g. Mac OS X).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@324955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r307535 | qwell | 2011-02-10 16:35:49 -0600 (Thu, 10 Feb 2011) | 15 lines
Merged revisions 307534 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r307534 | qwell | 2011-02-10 16:33:09 -0600 (Thu, 10 Feb 2011) | 8 lines
Remove color when executing commands via a remote console.
Essentially this makes '-x' imply '-n' on rasterisk. This was done in a
different and incomplete way previously, which I'm reverting here.
(issue #18776)
Reported by: alecdavis
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@307536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r296533 | tilghman | 2010-11-29 01:27:09 -0600 (Mon, 29 Nov 2010) | 13 lines
I love standards. There are so many to choose from. Except when there isn't one.
Linux and *BSD disagree on the elements within the ucred structure. Detect
which one is in use on the system.
(closes issue #18384)
Reported by: bjm
Patches:
cred-diffs uploaded by bjm (license 473)
20101127__issue18384__1.6.2.diff.txt uploaded by tilghman (license 14)
20101127__issue18384__1.8.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman, bjm
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@296534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r294639 | jpeeler | 2010-11-11 13:31:00 -0600 (Thu, 11 Nov 2010) | 53 lines
Merged revisions 294384 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r294384 | jpeeler | 2010-11-09 11:37:59 -0600 (Tue, 09 Nov 2010) | 47 lines
Fix a deadlock in device state change processing.
Copied from some notes from the original author (Russell):
Deadlock scenario:
Thread 1: device state change thread
Holds - rdlock on contexts
Holds - hints lock
Waiting on channels container lock
Thread 2: SIP monitor thread
Holds the "iflock"
Holds a sip_pvt lock
Holds channel container lock
Waiting for a channel lock
Thread 3: A channel thread (chan_local in this case)
Holds 2 channel locks acquired within app_dial
Holds a 3rd channel lock it got inside of chan_local
Holds a local_pvt lock
Waiting on a rdlock of the contexts lock
A bunch of other threads waiting on a wrlock of the contexts lock
To address this deadlock, some locking order rules must be put in place and
enforced. Existing relevant rules:
1) channel lock before a pvt lock
2) contexts lock before hints lock
3) channels container before a channel
What's missing is some enforcement of the order when you involve more than any
two. To fix this problem, I put in some code that ensures that (at least in the
code paths involved in this bug) the locks in (3) come before the locks in (2).
To change the operation of thread 1 to comply, I converted the storage of hints
to an astobj2 container. This allows processing of hints without holding the
hints container lock. So, in the code path that led to thread 1's state, it no
longer holds either the contexts or hints lock while it attempts to lock the
channels container.
(closes issue #18165)
Reported by: antonio
ABE-2583
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@294640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r290863 | jpeeler | 2010-10-07 21:45:44 -0500 (Thu, 07 Oct 2010) | 16 lines
Merged revisions 290862 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r290862 | jpeeler | 2010-10-07 21:35:29 -0500 (Thu, 07 Oct 2010) | 9 lines
Ensure editline cleanup occurs when Ctrl-C is pressed at control console.
A recent change was made to avoid a race condition on shutdown which only called
the end functions from the console thread. However, when pressing Ctrl-C the
quit handler is called from the signal handler thread.
(closes issue #17698)
Reported by: jmls
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@290864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r288340 | russell | 2010-09-22 11:44:13 -0500 (Wed, 22 Sep 2010) | 18 lines
Merged revisions 288339 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r288339 | russell | 2010-09-22 11:39:16 -0500 (Wed, 22 Sep 2010) | 11 lines
Fix a 100% CPU consumption problem when setting console=yes in asterisk.conf.
The handling of -c and console=yes should be the same, but they were not.
When you specify -c, it sets both a flag for console module and for asterisk
not to fork() off into the background. The handling of console=yes only set
console mode, so you would end up with a background process() trying to run
the Asterisk console and freaking out since it didn't have anything to read
input from.
Thanks to beagles for reporting and helping debug the problem!
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@288341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
