This resolves a large number of compiler warnings from GCC 4.10 which
cause the build to fail under dev mode. The vast majority are
signed/unsigned mismatches in printf-style format strings.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@413586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@411715 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated the code to check to see if MOH is playing on the transferor and if
so then start it on the channel that replaces it during a masquerade.
Example scenario of the problem:
Alice calls Bob and then Bob begins the attended transfer process into a queue.
Upon going on hold Alice hears music and so does Bob once he is in the queue.
Bob then transfers Alice into the queue and then music for Alice stops even
though she should be hearing it since has now replaced Bob in the queue.
The problem that was occurring is that once the channel was masqueraded the app
(queues, confbridge, etc...) had no way of knowing that the channel had just
been swapped out thus it did not start music for the present channel.
Credit to Olle Johansson for pointing me in the right direction on this issue.
(closes issue ASTERISK-19499)
Reported by: Timo Teräs
Review: https://reviewboard.asterisk.org/r/3226/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@408642 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_filestream object gets tacked on to a channel via
chan->timingdata. It's a reference counted object, but the reference
count isn't used when putting it on a channel. It's theoretically
possible for another thread to interfere with the channel while it's
unlocked and cause the filestream to get destroyed.
Use the astobj2 reference count to make sure that as long as this code
path is holding on the ast_filestream and passing it into the file.c
playback code, that it knows it's valid.
Bug reported by Leif Madsen.
Review: https://reviewboard.asterisk.org/r/3135/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@406566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Debug messages aren't free. Even when the debug level is sufficiently low such
that the messages are never evaluated, there is a cost to having to parse
Asterisk logs that contain debug messages that (a) fail to convey sufficient
information or (b) occur so frequently as to be next to meaningless. Based on
having to stare at lots of DEBUG messages, this patch makes the following
changes:
* channel.c: When copying variables from a parent channel to a child channel,
specify the channels involved. Do not log anything for a variable that is not
inherited; the fact that it doesn't have an _ or __ already signifies that it
won't be inherited.
* pbx.c: Specify what function evaluation has occurred that created the result.
* translate.c: Bump up the translator path messages to 10. I've never once had
to use these debug messages, and for each format that is registered (on
startup) and unregistered (on shutdown) the entire f^2 matrix is logged out.
For short tests in the Asterisk Test Suite, this should make finding the
actual test much easier.
* xmldoc.c: The debug message that 'blah' is not found in the tree is expected.
Often, description elements - which are not required - are not provided.
This debug message adds no additional value, as it is not indicative of an
error or helpful in debugging which element did not contain a 'blah' element
as a child. If an element is supposed to contain a child element, then that
XML tree should have failed validation in the first place.
Review: https://reviewboard.asterisk.org/r/2966/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@402150 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r378303 the AST_FLAG_DISABLE_DEVSTATE_CACHE flag was added that tells
the devstate system to not cache states for non-real devices. However,
when optimizing away channels (ast_do_masquerade), that flag wasn't
copied.
In my case, using Local devices as queue members created a situation
where the endpoint was considered in use, but the state change of the
device being available again was ignored (not cached). The endpoint
channel was optimized into the (previously) Local channel, but kept
the do-not-cache flag. The end result being that the queue member
apparently stayed in use forever.
(closes issue ASTERISK-22718)
Reported by: Walter Doekes
Review: https://reviewboard.asterisk.org/r/2925/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@401178 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Check the returned bridged pointer for NULL to avoid a crash. It looks
like chan_agent is returning a NULL pointer when it probably should be
returning a pointer to the channel the Agent channel is pretending to be.
(closes issue ASTERISK-21793)
Reported by: Rodrigo P. Telles
Patches:
jira_asterisk_21793_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Rodrigo P. Telles
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@390044 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The two party bridging loops were changing the bridge peer pointers
without the channel locks held. Thus when ast_channel_massquerade()
tested and used the pointer there is a small window of opportunity for the
pointers to become NULL even though the masquerade code has the channels
locked.
(closes issue ASTERISK-21356)
Reported by: William luke
Patches:
jira_asterisk_21356_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: William luke
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@386256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This test event was missing from channel.c causing the dial_LS_options
test to fail intermittently because of a race condition where most code
paths emitted the test event but this one did not. The dial_LS_options
test should stop bouncing now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@378455 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk maintains an internal cache for devices in the event subsystem. The
device state cache holds the state of each device known to Asterisk, such that
consumers of device state information can query for the last known state for
a particular device, even if it is not part of an active call. The concept of
a device in Asterisk can include entities that do not have a physical
representation. One way that this occurred was when anonymous calls are allowed
in Asterisk. A device was automatically created and stored in the cache for
each anonymous call that occurred; this was possible in the SIP and IAX2
channel drivers and through channel drivers that utilized the
res_jabber/res_xmpp resource modules (Gtalk, Jingle, and Motif). These devices
are never removed from the system, allowing anonymous calls to potentially
exhaust a system's resources.
This patch changes the event cache subsystem and device state management to
no longer cache devices that are not associated with a physical entity.
(issue ASTERISK-20175)
Reported by: Russell Bryant, Leif Madsen, Joshua Colp
Tested by: kmoore
patches:
event-cachability-3.diff uploaded by jcolp (license 5000)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@378303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds hangup-related test events in order to support testing
of time-limited bridges. This aids in testing the S() and L() bridge
options.
(issue SWP-4713)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@378119 65c4cc65-6c06-0410-ace0-fbb531ad65f3
generator.
This patch introduces an internal helper function to safely check whether the
current generator is the one that is expected before deactivating it. The
current externally accessible ast_channel_stop_generator() function has been
modified to be implemented in terms of the new function.
(closes issue ASTERISK-19918)
Reported by: Eduardo Abad
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@376199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this change, a common method for determining if a timeout
was reached was to call a function such as ast_waitfor_n() and inspect
the out parameter that told how many milliseconds were left, then use
that as the input to ast_waitfor_n() on the next go-around.
The problem with this is that in some cases, submillisecond timeouts
can occur, resulting in the out parameter not decreasing any. When this
happens thousands of times, the result is that the timeout takes much
longer than intended to be reached. As an example, I had a situation where
a 3 second timeout took multiple days to finally end since most wakeups
from ast_waitfor_n() were under a millisecond.
This patch seeks to fix this pattern throughout the code. Now we log the
time when an operation began and find the difference in wall clock time
between now and when the event started. This means that sub-millisecond timeouts
now cannot play havoc when trying to determine if something has timed out.
Part of this fix also includes changing the function ast_waitfor() so that it
is possible for it to return less than zero when a negative timeout is given
to it. This makes it actually possible to detect errors in ast_waitfor() when
there is no timeout.
(closes issue ASTERISK-20414)
reported by David M. Lee
Review: https://reviewboard.asterisk.org/r/2135/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a bridge is broken by an AMI Redirect action or the ChannelRedirect
application, an in progress DTMF digit could be stuck sending forever.
* Made simulate a DTMF end event when a bridge is broken and a DTMF digit
was in progress.
(closes issue ASTERISK-20492)
Reported by: Jeremiah Gowdy
Patches:
bridge_end_dtmf-v3.patch.txt (license #6358) patch uploaded by Jeremiah Gowdy
Modified to jira_asterisk_20492_v1.8.patch
jira_asterisk_20492_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2169/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, if an acknowledgement of a timer fails Asterisk will not realize
that a serious error occurred and will continue attempting to use the timer's
file descriptor. This can lead to situations where errors stream to the
CLI/log file. This consumes significant resources, masks the actual problem
that occurred (whatever caused the timer to fail in the first place), and
can leave channels in odd states.
This patch propagates the errors in the timing resource modules up through
the timer core, and makes users of these timers handle acknowledgement
failures. It also adds some defensive coding around the use of timers
to prevent using bad file descriptors in off nominal code paths.
Note that the patch created by the issue reporter was modified slightly for
this commit and backported to 1.8, as it was originally written for
Asterisk 10.
(issue ASTERISK-20032)
Reported by: Jeremiah Gowdy
patches:
jgowdy-timerfd-6-22-2012.diff uploaded by Jeremiah Gowdy (license 6358)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@375893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_waitfordigit_full would simply pass its timeout to ast_waitfor_nandfds,
expecting it to decrement the timeout by however many milliseconds were
waited. This is a problem if it consistently waits less than 1ms. The timeout
will never be decremented, and we wait... FOREVER!
This patch makes ast_waitfordigit_full manage the timeout itself. It maintains
the previously undocumented behavior that negative timeouts wait forever.
(closes issue ASTERISK-20375)
Reported by: Mark Michelson
Tested by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/2109/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@373024 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, the user would have a parkinglot set on a channel that
was parked and when the channel was retrieved, any attempt by that channel
to park would simply use the default. This patch makes parkinglot values
set in this way be retained through the masquerade.
(closes issue AST-990)
Reported by: Nick Huskinson
Patches:
masquerade_parkinglot_patch.diff Uploaded by Jonathan Rose (license 6182)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@372736 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Dummy channels usually aren't read from, but functions like SHELL and CURL
use autoservice on the channel.
(closes issue ASTERISK-20283)
Reported by: Gareth Palmer
Patches:
svn-371580.patch (license #5169) patch uploaded by Gareth Palmer (modified)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@371888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST_CAUSE_NOTDEFINED is a placeholder for usage when there is no cause
information. As such, it should not be defined and translatable as a
cause.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@370923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This replaces all calls to alloca() with ast_alloca() which calls gcc's
__builtin_alloca() to avoid BSD semantics and removes all NULL checks
on memory allocated via ast_alloca() and ast_strdupa().
(closes issue ASTERISK-20125)
Review: https://reviewboard.asterisk.org/r/2032/
Patch-by: Walter Doekes (wdoekes)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@370642 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revision 370205 added the use of a datastore attached to a dummy channel to
resolve a memory leak, but ast_dummy_channel_destructor() in this branch did
not free datastores, resulting in a continued (but slightly smaller) memory
leak. This patch backports the change to free said datastores from the Asterisk
trunk.
(related to issue AST-916)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@370360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While addressing a bug, I came across a instance of 'struct ast_datastore_info'
that was not declared 'const'. Since the API already expects them to be
'const', this patch changes the declarations of all existing instances
that were not already declared that way.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@370183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@369001 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Calling ast_set_hangupsource() with the channel lock held can result in a
deadlock because the function also locks the bridged channel.
(issue ASTERISK-19537)
(closes issue ASTERISK-19801)
Reported by: Alec Davis
(closes issue AST-891)
Reported by: Guenther Kelleter
Tested by: Guenther Kelleter
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@368759 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Restructure ast_do_masquerade() to not hold channel locks while it calls
ast_indicate().
* Simplify many calls to ast_do_masquerade() since it will never return a
failure now. If it does fail internally because a channel driver callback
operation failed, the only thing ast_do_masquerade() can do is generate a
warning message about strange things may happen and press on.
* Fixed the call to ast_bridged_channel() in ast_do_masquerade(). This
change fixes half of the deadlock reported in ASTERISK-19801 between
masquerades and chan_iax.
(closes issue ASTERISK-19537)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1915/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@368405 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes to situations that could cause the CEL LINKEDID_END event to
be missed.
1) During a core stop gracefully, modules are unloaded when ast_active_channels
== 0. The LINKDEDID_END event fires during the channel destructor. This means
that occasionally, the cel_* module will be unloaded before the channel is
destroyed. It seemed generally useful to wait until the refcount of all
channels == 0 before unloading, so I added a channel counter and used it in the
shutdown code.
2) During a masquerade, ast_channel_change_linkedid is called. It calls
ast_cel_check_retire_linkedid which unrefs the linkedid in the linkedids
container in cel.c. It didn't ref the new linkedid. Now it does.
Review: https://reviewboard.asterisk.org/r/1900/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@367292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This resolves core findings from ASTERISK-19650 numbers 0-2, 6, 7, 9-11, 14-20,
22-24, 28, 30-32, 34-36, 42-56, 82-84, 87, 89-90, 93-102, 104, 105, 109-111,
and 115. Finding numbers 26, 33, and 29 were already resolved. Those skipped
were either extended/deprecated or in areas of code that shouldn't be
disturbed.
(Closes issue ASTERISK-19650)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@366167 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Q.951 indicates that when the presentation indicator is "Number not
available due to interworking" for a number then the screening indicator
field should be "Network provided".
* Made ast_party_id_presentation() return AST_PRES_NUMBER_NOT_AVAILABLE
when the presentation is "Number not available due to interworking". This
fix makes Asterisk consistent and it also makes it consistent with earlier
branches as far as this presentation value is concerned.
* Made pri_to_ast_presentation() and ast_to_pri_presentation() conversions
handle the "Number not available due to interworking" case better in
sig_pri.c. This change is possible because the minimum required libpri
version (v1.4.11) has the necessary defines in libpri.h.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@360309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Calling ast_indicate()/ast_indicate_data() with the channel lock held can
result in a deadlock with a local channel because of how local channels
need to avoid deadlock.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@359451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When connected line support was added, the wait_for_answer() variable
single changed its meaning slightly. Unfortunately, the places where
single was used did not necessarily get updated to reflect that change.
Also audio/video frames were sent to all forked calls when the endpoints
were never made compatible.
* Don't pass audio/video media frames when the channels have not been made
compatible.
* Added handling of AST_CONTROL_SRCCHANGE to app_dial.c.
* Fixed app_dial.c passing on AST_CONTROL_HOLD because that frame can also
pass a requested MOH class.
(closes issue ASTERISK-16901)
Reported by: Chris Gentle
(closes issue ASTERISK-17541)
Reported by: clint
Review: https://reviewboard.asterisk.org/r/1805/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@359344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The check if an ISDN call is bridged before it could be placed on hold is
not necessary and is overly restrictive. The check was originally done to
prevent problems with call transfers in case a user tried to transfer a
call connected to an application to another call connected to an
application. The ISDN transfer code has not required this restriction for
quite some time because ECT could transfer any two active calls to each
other.
* Remove ISDN hold restriction for calls connected to applications.
* Made ast_waitfordigit_full() ignore AST_CONTROL_HOLD and
AST_CONTROL_UNHOLD instead of generating a warning message.
(closes issue ASTERISK-19388)
Reported by: Birger Harzenetter
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@357894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This takes two actions.
1. Move the reading of the alertpipe in __ast_read() to immediately before the
removal of frames from the readq. This means we won't do something silly like
read from the alertpipe, then ignore the fact that there's a frame to get from
the readq since channel's fdno is the AST_TIMING_FD.
2. When ast_settimeout() sets the rate to 0 and the timingfunc to NULL, if the
channel's fdno is the AST_TIMING_FD, then set the fdno to -1. This is because
if the rate is 0 and the timingfunc is NULL, it means that the channel's timing
fd is being invalidated, so any pending reads should not occur.
This may actually solve more issues than the referenced one below, but it's not
known at this time for sure.
(closes issue ASTERISK-19223)
reported by Frank-Michael Wittig
Review: https://reviewboard.asterisk.org/r/1779
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@357761 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes some unnecessary locking of the channels container in
ast_hangup(). The reason this came up is that this lock can very quickly block
the entire system. If any of the channel cleanup code decides to block, it
causes a problem for the whole system. For example, when audiohooks get
destroyed, if that blocks for a while waiting on the mixmonitor thread to exit
because it's busy blocking on some I/O, it causes a problem for many other
threads in the meantime.
Review: https://reviewboard.asterisk.org/r/1712/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@354492 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add locking when a channel inherits variables and datastores in
__ast_request_and_dial() and ast_call_forward(). Note: The involved
channels are not active so there was minimal potential for problems.
* Remove calls to ast_set_callerid() in __ast_request_and_dial() and
ast_call_forward() because the set information is for the wrong direction.
* Don't use C++ keywords for variable names in ast_call_forward().
* Run the redirecting interception macro if defined when forwarding a call
in ast_call_forward(). Note: Currently will never execute because the
only callers that supply a calling channel supply a hungup or zombie
channel.
* Make feature_request_and_dial() put the transferee into autoservice when
it calls ast_call_forward() in case a redirection interception macro is
run. Note: Currently will never happen because the caller channel (Party
B) is always hungup at this time.
* Make feature_request_and_dial() ignore the AST_CONTROL_PROCEEDING frame
to silence a log message.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@348464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_cdr_setcid() and ast_cdr_update() were shown in ASTERISK-18836 to
be called by different threads for the same channel. The channel driver
thread and the PBX thread running dialplan.
* Add lock protection around CDR API calls that access an ast_channel
pointer.
(closes issue ASTERISK-18836)
Reported by: gpluser
Review: https://reviewboard.asterisk.org/r/1628/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@348362 65c4cc65-6c06-0410-ace0-fbb531ad65f3
int blah = 1;
...
write(chan->alertpipe[1], &blah, new_frames * sizeof(blah)) !=
(new_frames * sizeof(blah)))
is only valid when new_frames == 1. Otherwise we start reading into adjacent
variables declared on the stack. The read end discards what is read, so the
values don't matter but it's not a good idea to read past where we want even
though new_frames is almost always 1 and should never be large. This patch is
basically taken out of kpfleming's eventfd branch, as he mentioned that he
remembered fixing it there when I talked to him about this issue.
Review: https://reviewboard.asterisk.org/r/1583/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@345163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add AST_CONTROL_UPDATE_RTP_PEER frame to be ignored here to avoid
displaying a WARNING message.
(closes issue ASTERISK-18610)
Patch by: Kristijan_Vrban
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@340878 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 6234 is an update to RFC 3174 from which the code was originally taken.
It has a slightly better code, and a better phrased license (simple 3-clause
BSD).
* main/sha1.c is sha1.c from RFC 6234 with formatting changes only.
* include/asterisk/sha1.h merges sha.h and sha-private.h from RFC 6234.
* Removed unused include of asterisk/sha1.h from main/channels.c
Review: https://reviewboard.asterisk.org/r/1503/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@340263 65c4cc65-6c06-0410-ace0-fbb531ad65f3
in the case of DAHDI the channel is hungup.
This patch tries to "fix" the problem and make the channel compatiable and warn the user of
this problem.
Please note there is a underlying problem with codec negotion this does not fix the problem
it does try to rectify it and prevent loss of service.
Review: https://reviewboard.asterisk.org/r/1442/
(closes issue ASTERISK-17541)
(closes issue ASTERISK-18063)
(issue ASTERISK-14384)
(issue ASTERISK-17502)
(issue ASTERISK-18325)
(issue ASTERISK-18422)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@337430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In a situation involving devices on separate Asterisk trunks, the remote RTP bridge would
break when starting a call with directmedia. This patch queues a new type of control frame
so that our RTP bridge loop can properly detect when these situations occur and check to see
if peers need to be updated in order to send their media to the proper location.
(Closes issue ASTERISK-18340)
Reported by: Thomas Arimont
(Closes issue ASTERISK-17725)
Reported by: kwk
Tested by: twilson, jrose
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@336294 65c4cc65-6c06-0410-ace0-fbb531ad65f3
