This API provides a generic way for multiple RTP stacks to be
integrated into Asterisk. Right now there is only one present, res_rtp_asterisk,
which is the existing Asterisk RTP stack. Functionality wise this commit
performs the same as previously. API documentation can be viewed in the
rtp_engine.h header file.
Review: http://reviewboard.digium.com/r/209/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Special thanks goes to DEA who had to redo this patch twice
because we first put unload/load support in and later redid the way
we configure devices and lines.
(closes issue #10297)
Reported by: DEA
Patches:
skinny-reload-trunkv2.diff uploaded by wedhorn (license 30)
skinny-reload-trunk-v4.txt uploaded by DEA (license 3)
With mods by me based on feedback from wedhorn and Russell and seanbright
Tested by: DEA, mvanbaak, pj
Review: http://reviewboard.digium.com/r/130/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes a number of changes to the indications API. The primary
motivation for this work was to improve stability. The object management
in this API was significantly flawed, and a number of trivial situations could
cause crashes.
The changes included are:
1) Remove the module res_indications. This included the critical functionality
that actually loaded the indications configuration. I have seen many people
have Asterisk problems because they accidentally did not have an
indications.conf present and loaded. Now, this code is in the core,
and Asterisk will fail to start without indications configuration.
There was one part of res_indications, the dialplan applications, which did
belong in a module, and have been moved to a new module, app_playtones.
2) Object management has been significantly changed. Tone zones are now
managed using astobj2, and it is no longer possible to crash Asterisk by
issuing a reload that destroys tone zones while they are in use.
3) The API documentation has been filled out.
4) The API has been updated to follow our naming conventions.
5) Various bits of code throughout the tree have been updated to account
for the API update.
6) Configuration parsing has been mostly re-written.
7) "Code cleanup"
The code is from svn/asterisk/team/russell/indications/.
Review: http://reviewboard.digium.com/r/149/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Dan saw regular segfaults with the old implementation and
rewrote it to make it really eventbased.
I altered it to be trunk compatible and wedhorn gave some feedback
and ideas how to make it even better.
(closes issue #13821)
Reported by: DEA
Patches:
chan_skinny-mwi-events.txt uploaded by DEA (license 3)
Tested by: mvanbaak, DEA
"no probs by me" from wedhorn
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@169367 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Behaviour now is that general codec config flows to default_line and default_device. [devices] stuff amends default_device and similar for [lines]. These are copied to individual device and line as they are created.
Added confcapability and confprefs for the configured stuff which doesn't change as device and so on are connected. prefs are based on line prefs if they exist, else the device prefs are used (prefs identifies codec order).
(closes issue #13806)
Reported by: pj
Patches:
codecs.diff uploaded by wedhorn (license 30)
Tested by: pj and me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We dont want to scare users with this, so we added a devmode compile flag
(closes issue #13952)
Reported by: wedhorn
Patches:
packetdebug3.diff uploaded by wedhorn (license 30)
Tested by: mvanbaak, wedhorn
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160938 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Without this reorder tone will play after hangup and both wedhorn's and my wife have threatened to use an axe on our asterisk box
(closes issue #13948)
Reported by: wedhorn
Patches:
switch.diff uploaded by wedhorn (license 30)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add CLI aliases module to asterisk.
- Remove all deprecated CLI commands from the code
Initial work done by file.
Junk-Y and lmadsen did a lot of work and testing to
get the list of deprecated commands into the configuration file.
Deprecated CLI commands are now handled by this new module,
see cli_aliases.conf for more info about that.
ok russellb@ via reviewboard
(closes issue #13735)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #13524)
Reported by: wedhorn
Patches:
unload.diff uploaded by wedhorn (license 30)
With small tweak by me to prevent a crash
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@143799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This will print the subs and their status for every line (if any).
wedhorn did most of the work with his patch which introduced
'skinny show debug' but a discussion on IRC stated that it should be
added to 'skinny show lines'
Input on the output format by Qwell on IRC.
(closes issue #13344)
Reported by: wedhorn
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140938 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r136062 | mmichelson | 2008-08-06 10:58:40 -0500 (Wed, 06 Aug 2008) | 16 lines
Since adding the AST_CONTROL_SRCUPDATE frame type,
there are places where ast_rtp_new_source may be called
where the tech_pvt of a channel may not yet have an
rtp structure allocated. This caused a crash in chan_skinny,
which was fixed earlier, but now the same crash has been
reported against chan_h323 as well. It seems that the best
solution is to modify ast_rtp_new_source to not attempt to
set the marker bit if the rtp structure passed in is NULL.
This change to ast_rtp_new_source also allows the removal
of what is now a redundant pointer check from chan_skinny.
(closes issue #13247)
Reported by: pj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A lot of whitespace issues have been resolved in this commit
Also some doc updates, but that's only 6 lines
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
