Originated channels are a bit odd - they are technically a dialed channel (thus
the party B or peer) but, since there is no caller, they are treated as the
party A. When entering into a bridge that already contains participants, the CDR
engine - if the CDR record is in the Dial state - attempts to match the person
entering the bridge with an existing participant. The idea is that if you dialed
someone and the person you dialed is already in the bridge, you don't need a new
CDR record, the existing CDR record describes the relationship.
Unfortunately, for an originated channel, there is no Party B. If no one was in
the bridge this didn't cause any issues; however, if participants were in the
bridge the CDR engine would attempt to match a non-existant Party B on the
channel's CDR record and explode.
This patch fixes that, and a unit test has been added to cover this case.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393164 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Parking typically occurs when a channel is transferred to a parking extension.
When this occurs, the channel never actually hits the dialplan if the extension
it was transferred to was a "parking extension", that is, the extension in
the first priority calls the Park application. Instead, the channel is
immediately sent into the holding bridge acting as the parking bridge.
This is problematic.
Because we never go out to the dialplan, the CDRs won't transition properly
and the application field will not be set to "Park". CDRs typically swallow
holding bridges, so the CDR itself won't even be generated.
This patch handles this by pulling out the holding bridge handling into its
own CDR state. CDRs now have an explicit parking state that accounts for this
specific subclass of the holding bridge. In addition, we handle the parking
stasis message to set application specific data on the CDR such that the
last known application for the CDR properly reflects "Park".
This is a bit sad since we're working around the odd internal implementation
of parking that exists in Asterisk (and that we had to maintain in order to
continue to meet some odd use cases of parking), but at least the code to
handle that is where it belongs: in CDRs as opposed to sprinkled liberally
throughout the codebase.
This patch also properly clears the OUTBOUND channel flag from a channel when
it leaves a bridge, and tweaks up dialing handling to properly compare the
correct CDR with the channel calling/being dialed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add config framework OPT_CHAR_ARRAY_T and OPT_STRINGFIELD_T non-empty
requirement option. There are cases were you don't want a config option
string to be empty. To require the option string to be non-empty, just
set the aco_option_register() flags parameter to non-zero.
* Updated some config framework enum aco_option_type comments.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix locking problems. ast_bridge_move() locks two bridges. To do that,
deadlock avoidance must be done. Called bridge_move_locked() instead.
* Fix inconsistency in the bridge dissolve check callers. The original
caller has already removed the channel from the bridge. The new caller
has not removed the channel from the bridge. Reverted
bridge_dissolve_check() and added bridge_dissolve_check_stolen() to be
used by the new caller on the original bridge after the channel is moved
to the new bridge.
* Fix memory leak of features if the added channel was already in a
bridge.
* Fix incorrect call to ast_bridge_impart().
* Renamed bridge_chan to yanked_chan.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change removes AST_CEL_BRIDGE_UPDATE since it should no longer be
used because masquerade situations are now accounted for in other ways.
This also refactors usage of AST_CEL_FORWARD to be produced by a Dial
message which has been extended with a "forward" field.
(closes issue ASTERISK-21566)
Review: https://reviewboard.asterisk.org/r/2635/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392829 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes the following memory leaks:
* http.c: The structure containing the addresses to bind to was not being
deallocated when no longer used
* named_acl.c: The global configuration information was not disposed of
* config_options.c: An invalid read was occurring for certain option types.
* res_calendar.c: The loaded calendars on module unload were not being
properly disposed of.
* chan_motif.c: The format capabilities needed to be disposed of on module
unload. In addition, this now specifies the default options for the
maxpayloads and maxicecandidates in such a way that it doesn't cause the
invalid read in config_options.c to occur.
(issue ASTERISK-21906)
Reported by: John Hardin
patches:
http.patch uploaded by jhardin (license 6512)
named_acl.patch uploaded by jhardin (license 6512)
config_options.patch uploaded by jhardin (license 6512)
res_calendar.patch uploaded by jhardin (license 6512)
chan_motif.patch uploaded by jhardin (license 6512)
........
Merged revisions 392810 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392812 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses the following memory/ref counting leaks:
* main/devicestate.c - unsubscribe and join our devicestate message
subscription
* main/cel.c - clean up the datastore and config objects on exist
* main/parking.c - cleanup memory leak of retriever snapshot on message
payload destruction
* res/parking/parking_bridge.c - cleanup memory leak of retrieve snapshot
on message payload destruction
* main/presencestate.c - unsubscribe and join the caching topic on exit
* manager.c - properly unregister the manager action "BlindTransfer"
* sorcery.c - shutdown the threadpool on exit and dispose of any wizards
(issue ASTERISK-21906)
Reported by: John Hardin
patches:
cel.patch uploaded by jhardin (license #6512)
devicestate.patch uploaded by jhardin (license #6512)
manager.patch uploaded by jardin (license #6512)
presencestate.patch uploaded by jhardin (license #6512)
retriever-channel-snapshot.patch uploaded by jhardin (license #6512)
sorcery.patch uploaded by jhardin (license #6512)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392797 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds support for stasis/sounds and stasis/sounds/{ID} queries via
the Asterisk RESTful Interface (ARI, formerly Stasis-HTTP).
The following changes have been made to accomplish this:
* A modular indexer was created for local media.
* A new function to get an ast_format associated with a file extension
was added.
* Modifications were made to the built-in HTTP server so that URI
decoding could be deferred to the URI handler when necessary.
* The Stasis-HTTP sounds JSON documentation was modified to handle
cases where multiple languages are installed in different formats.
* Register and Unregister events for formats were added to the system
topic.
(closes issue ASTERISK-21584)
(closes issue ASTERISK-21585)
Review: https://reviewboard.asterisk.org/r/2507/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was caused by forwarding all endpoint messages to manager which includes
channel messages that are related to the endpoint. This change causes only
the PeerStatus messages to be forwarded to manager thus eliminating the
duplicate channel messages.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sorcery specific object information is now opaque and allocated with the object.
This means that modules do not need to be recompiled if the sorcery specific part
is changed. It also means that sorcery can store additional information on objects
and ensure it is freed or the reference count decreased when the object goes away.
To facilitate the above a generic sorcery allocator function has been added which
also ensures that allocated objects do not have a lock.
Extended fields have been added thanks to all of the above which allows specific fields
to be marked as extended, and thus simply stored as-is within the object. Type safety
is *NOT* enforced on these fields. A consumer of them has to query and ultimately perform
their own safety check. What does this mean? Extra modules can extend already defined
structures without having to modify them.
Tests have also been included to verify extended field functionality.
Review: https://reviewboard.asterisk.org/r/2585/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. Security events
2. Websocket support
3. Diversion header + redirecting support
4. An anonymous endpoint identifier
5. Inbound extension state subscription support
6. PIDF notify generation
7. One touch recording support (special thanks Sean Bright!)
8. Blind and attended transfer support
9. Automatic inbound registration expiration
10. SRTP support
11. Media offer control dialplan function
12. Connected line support
13. SendText() support
14. Qualify support
15. Inband DTMF detection
16. Call and pickup groups
17. Messaging support
Thanks everyone!
Side note: I'm reminded of the song "How Far We've Come" by Matchbox Twenty.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Extract a useful routine from the softmix bridge technology for other
technologies. Make other technologies use it if they can.
* Made native and 1-1 bridges write to all parties if the bridge channel
writing the frame into the bridge is NULL. Softmix will also do the same
for frame types that make sense.
* Tweak the bridge write routine return value meaning and adjust the
bridge technologies to match.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392514 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The bridge frame queue functions need to return an error status if the
frame failed to be queued because of an error condition. The main calls
that needed to return the status are:
ast_bridge_channel_queue_action_data() and
ast_bridge_channel_write_action_data(). The other return changes are
ripple effects.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a threadpool is set to autoincrement its threadcount, an issue
may arise when multiple tasks are queued at once into the threadpool. Since
threads start active, each new task would result in autoincrementing the
thread count. So if all threads were active, and a thread's autoincrement
value were 5, then 3 new tasks would result in 15 threads being created even
though the initial autoincrement was sufficient to handle the number of tasks.
This change introduces three behavior changes:
1) New threads in the threadpool start idle instead of active.
2) When a threadpool autoincrements, one thread is activated after the growth.
3) When a threadpool's size is incremented manually, all added threads are activated.
For a more detailed explanation about the changes, please see the Review Board link
at the bottom of this commit.
Review: https://reviewboard.asterisk.org/r/2629
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For about forever, our build flags for OS X have been slightly off, but
good enough to build and run. Apparently they aren't good enough any more.
Previously, we would compile with macosx-version-min unset and link with
it set. This combination, using GCC 4.8, on Mountain Lion, would create a
bad executable ("Illegal Instruction: 4", or something like that)
This patch consistently sets macosx-version-min for both compiling and
linking, which makes everything happy enough to build and run.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This finishes moving all CEL linkedid tracking entirely within cel.c
since that is now possible with channel snapshots.
This also removes another CEL linkedid manipulation function from cel.h
that has already been internalized and is neither called nor available
to link against.
Review: https://reviewboard.asterisk.org/r/2632/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The type of tv_usec is suseconds_t. On Linux, this is usually a long int, but
the specification is actually pretty lax on what it might actually be. And,
sadly, there's no printf/scanf width specifier for suseconds_t. So it could
bit an int or a long, but there's not a great way to tell which it is.
This patch fixes scanf by reading into a long temporary variable that's then
stored into the tv_usec. It fixes printf by casting the tv_usec to a long
first.
This patch also adds some missing width specifiers for some debug statements,
which would cause ".000001" to be displayed at ".1".
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel is originated, its application is typically set to AppDial2,
indicating that it was a dialed channel through the Dial API. Asterisk during
an originate will perform a stack execute to direct the outgoing channel to
a particular place in the dialplan or application. When the stack returns, the
previous application (AppDial2) is restored.
Unfortunately, in the case of an originated channel, the stack restore happens
after hangup. A stasis message is sent notifying everyone that the application
was restored, and this causes a NewExten event to go out after the Hangup event,
violating the basic contract consumers have of the channel lifetime. While we
could preclude the message from going out, restoring the channel's state before
it executed the next higher frame in the stack has to occur, and other places
in the code depend on this behavior.
Since we know that channel hung up (it's a ZOMBIE!), this patch simply checks
to see if the channel has been zombified before sending a NewExten event.
Note that this will fix a number of bouncing tests in the Test Suite. Go tests.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In revision 389733, mwi state allocation was placed into its
own function instead of performing the allocation in-line when
required. The issue was that in ast_publish_mwi_state_full(),
the local variable "uniqueid" was no longer being set, but it was
still being used as the topic for MWI. This meant that all MWI
publications ended up being published to the "" (empty string)
mailbox topic. Thus MWI subscriptions for specific mailboxes were
never notified of mailbox state changes.
This change fixes the issue by removing the local uniqueid variable
from ast_publish_mwi_state_full() and instead referencing the
mwi_state->uniqueid field since it has been properly set.
(closes issue ASTERISK-21913)
Reported by Malcolm Davenport
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391921 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Properly search for bridge association structures so that they are
found when expected and handle cases where they don't exist.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridge snapshot events were missing some important transitions that
were noticed in subsequent snapshots. Snapshots will now be published
on all bridge reconfigurations.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The options should not be registered multiple times. Instead, the configuration just needs
to be reprocessed by the config framework. This also exposed that we were not properly telling
the config framework to treat the configuration processing with the "reload" semantics when
a reload occurred. Both of these errors are fixed now.
Thanks to Richard Mudgett for discovering the leak.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While very handy, this macro didn't occur until a later version of libjansson.
We'd prefer to be compatible with older versions still - as such, iteration
over key/value pairs in a JSON object have to be done with a little bit more
manual work.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This pulls bridge-related CEL event triggers out of the code in which
they were residing and pulls them into cel.c where they are now
triggered by changes in bridge snapshots. To get access to the
Stasis-Core parking topic in cel.c, the Stasis-Core portions of parking
init have been pulled into core Asterisk init.
This also adds a new CEL event (AST_CEL_BRIDGE_TO_CONF) that indicates
a two-party bridge has transitioned to a multi-party conference. The
reverse cannot occur in CEL terms even though it may occur in actuality
and two party bridges which receive a AST_CEL_BRIDGE_TO_CONF will be
treated as multi-party conferences for the duration of the bridge.
Review: https://reviewboard.asterisk.org/r/2563/
(closes issue ASTERISK-21564)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This uses the channel state change events from Stasis-Core to determine
when channel-related CEL events should be raised. Those refactored in
this patch are:
* AST_CEL_CHANNEL_START
* AST_CEL_ANSWER
* AST_CEL_APP_START
* AST_CEL_APP_END
* AST_CEL_HANGUP
* AST_CEL_CHANNEL_END
Retirement of Linked IDs is also refactored.
CEL configuration has been refactored to use the config framework.
Note: Some HANGUP events are not generated correctly because the bridge
layer does not propagate hangupcause/hangupsource information yet.
Review: https://reviewboard.asterisk.org/r/2544/
(closes issue ASTERISK-21563)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes three memory leaks
* When we load a module with the LOAD_PRIORITY flag, we remove its entry from
the load order list. Unfortunately, we don't free the memory associated with
entry in the list. This patch corrects that and properly frees the memory
for the module in the list.
* When adding a custom format (such as SILK or CELT), the routine for adding
the format was leaking a reference. RAII_VAR cleans this up properly.
* We now de-ref the channel_snapshot appropriately when an endpoint is
disposed of
........
Merged revisions 391489 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 391507 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two memory leaks:
* A memory leak in packing channels into a multi-channel blob payload when
publishing dial messages. The multi-channel blob payload does not steal
the references - this approach was chosen because it works well with the
RAII_VAR macro. Unfortunately, this does mean that you actually have to use
the RAII_VAR macro (or manually deref it yourself)
* RTP instances returned as a result of one of the glue operations are ref
counted and have to be de-ref'd appropriately. We now do that, as saying
that we should do it and then not would be silly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When checking compatability for the native RTP bridge technology there is a
race condition between clearing framehooks that are destroyed when leaving
certain bridges with certain technologies (such as bridge_native_rtp) and
joining bridges with the bridge_native_rtp technology. Yes, that means a
channel in a native RTP bridge could move to another native RTP bridge and
be considered incompatible with the new native RTP bridge causing it to
revert to a simple bridge technology0. This fixes that bug by ignoring
framehooks that have been marked for destruction when checking for
compatibility with the bridge_native_rtp technology.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a Stasis message type is defined in a loadable module, handling
those messages for AMI and res_stasis events can be cumbersome.
This patch adds a vtable to stasis_message_type, with to_ami and
to_json virtual functions. These allow messages to be handled
abstractly without putting module-specific code in core.
As an example, the VarSet AMI event was refactored to use the to_ami
virtual function.
(closes issue ASTERISK-21817)
Review: https://reviewboard.asterisk.org/r/2579/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
