When res_adsi is unloaded, it removes the ADSI functions that it previously installed
by passing a NULL adsi_funcs pointer to ast_adsi_install_funcs. This function was not
checking whether or not the adsi_funcs pointer passed in was NULL before dereferencing
it to check whether or not the version of the functions matches what the core was
expecting it.
This patch makes it so that the version is only checked if a potentially valid adsi_funcs
pointer was passed in. Passing in NULL removes the installed functions, bypassing the
version check.
........
Merged revisions 369390 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369391 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Thank you rmudgett for pointing out that I was missing this in the initial
check-in for AMI event documentation (r369346)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Certain places in core/cdr.c would, if the duration value were 0, calculate the
duration as being the delta between the current time and the time at which the
CDR record was started. While this does not typically cause a problem in
non-batch mode, this can cause an issue in batch mode where CDR records are
gathered and written long after those calls have ended. In particular, this
affects calls that were never answered, as those are expected to have a duration
of 0. Often, this would result in CDR logs with a significant number of calls
with lengthy durations, but dispositions of "BUSY".
Note that this does not affect cdr_csv, as that backend does not use
ast_cdr_getvar and instead directly reports the duration value. The affected
core backends include cdr_apative_odbc and cdr_custom; other extended or
deprecated CDR backends may potentially still directly manipulate the duration
values.
(issue ASTERISK-19860)
Reported by: Thomas Arimont
(issue AST-883)
Reported by: Thomas Arimont
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1996/
........
Merged revisions 369351 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369369 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the core changes necessary to support AMI event documentation
in the source files of Asterisk, and adds documentation to those AMI events
defined in the core application modules. Event documentation is built from
the source by two new python scripts, located in build_tools:
get_documentation.py and post_process_documentation.py.
The get_documentation.py script mirrors the actions of the existing AWK
get_documentation scripts, except that it will scan the entirety of a source
file for Asterisk documentation. Upon encountering it, if the documentation
happens to be an AMI event, it will attempt to extract information about the
event directly from the manager event macro calls that raise the event. The
post_process_documentation.py script combines manager event instances that
are the same event but documented in multiple source files. It generates
the final core-[lang].xml file.
As this process can take longer to complete than a typical 'make all', it
is only performed if a new make target, 'full', is chosen.
Review: https://reviewboard.asterisk.org/r/1967/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix do_bridge_masquerade() getting the resume location from the zombie
channel. The code must not touch a clone channel after it has masqueraded
it. The clone channel has become a zombie and is starting to hangup.
(closes issue ASTERISK-19985)
Reported by: jamicque
Patches:
jira_asterisk_19985_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: jamicque
........
Merged revisions 369327 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369328 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix AMI Bridge action disconnecting the AMI link on error.
* Fix AMI Bridge action and Bridge application not checking if their
masquerades were successful.
* Fix Bridge application running the h-exten when it should not.
* Made do_bridge_masquerade() return if the masquerade was successful so
the Bridge application and AMI Bridge action could deal with it correctly.
* Made bridge_call_thread_launch() hangup the passed in channels if the
bridge_call_thread fails to start. Those channels would have been
orphaned.
* Made builtin_atxfer() check the success of the transfer masquerade
setup.
........
Merged revisions 369282 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369283 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While working with ast_parse_arg() to perform a validity check, a segfault
occurred. The segfault occurred due to passing a NULL pointer to
ast_sockaddr_parse() from ast_parse_arg(). According to the documentation in
config.h, "result pointer to the result. NULL is valid here, and can be used to
perform only the validity checks."
This patch fixes the segfault by checking for a NULL pointer. This patch also
adds documentation to netsock2.h about why it is necessary to check for a NULL
pointer.
(Closes issue ASTERISK-20006)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
asterisk-20006-netsock-null-ptr.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/1990/
........
Merged revisions 369108 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369109 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel drivers that allow native bridging need to handle
AST_CONTROL_PVT_CAUSE_CODE frames and previously did not handle them
properly, usually breaking out of the native bridge. This change
corrects that behavior and exposes the available cause code information
to the dialplan while native bridges are in place. This required
exposing the HANGUPCAUSE hash setter outside of channel.c, so
additional documentation has been added.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369086 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the IAX2 Who Hung Up? changes were added, they uncovered a bug in
the way AST_CONTROL_PVT_CAUSE_CODE was handled in
feature_request_and_dial(). This particular frame subtype was being
treated like more terminal control frames causing the function to be
exited prematurely.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369061 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continuing with the Who Hung Up? project for Asterisk 11, this adds
support to IAX2 for the HANGUPCAUSE hash.
Additionally, this breaks out some functionality in frame.c for getting
information about frame types and subclasses.
Review: https://reviewboard.asterisk.org/r/1941/
(issue SWP-4222)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make non-normal dialplan execution routines be able to run on a hung up
channel. This is preparation work for hangup handler routines.
* Fixed ability to support relative non-normal dialplan execution
routines. (i.e., The context and exten are optional for the specified
dialplan location.) Predial routines are the only non-normal routines that
it makes sense to optionally omit the context and exten. Setting a hangup
handler also needs this ability.
* Fix Return application being able to restore a dialplan location
exactly. Channels without a PBX may not have context or exten set.
* Fixes non-normal execution routines like connected line interception and
predial leaving the dialplan execution stack unbalanced. Errors like
missing Return statements, popping too many stack frames using StackPop,
or an application returning non-zero could leave the dialplan stack
unbalanced.
* Fixed the AGI gosub application so it cleans up the dialplan execution
stack and handles the autoloop priority increments correctly.
* Eliminated the need for the gosub_virtual_context return location.
Review: https://reviewboard.asterisk.org/r/1984/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Hangup application used to just return -1 to cause normal dialplan
execution to hangup a channel. For the non-normal execution routines like
predial and connected-line interception routines, the hangup request would
exit the routine early but otherwise be ignored.
* Made the Hangup application not allow setting a cause code of zero. A
zero cause code is not defined.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368979 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added documentation describing what flags and arguments to pass to
aco_option_register for default option types. Also changed the ACL
handler to use the flags parameter to differentiate between "permit"
and "deny" instead of adding an additional vararg parameter.
Review: https://reviewboard.asterisk.org/r/1969/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was essentially duplicated functionality where normal channels used
AST_CAUSE_ANSWERED_ELSEWHERE while local channels and queues used
AST_FLAG_ANSWERED_ELSEWHERE. This removes the flag and converts that usage
into AST_CAUSE_ANSWERED_ELSEWHER usage.
Review: https://reviewboard.asterisk.org/r/1944
(closes issue ASTERISK-19865)
Patch-by: Birger Harzenetter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Restructure ast_do_masquerade() to not hold channel locks while it calls
ast_indicate().
* Simplify many calls to ast_do_masquerade() since it will never return a
failure now. If it does fail internally because a channel driver callback
operation failed, the only thing ast_do_masquerade() can do is generate a
warning message about strange things may happen and press on.
* Fixed the call to ast_bridged_channel() in ast_do_masquerade(). This
change fixes half of the deadlock reported in ASTERISK-19801 between
masquerades and chan_iax.
(closes issue ASTERISK-19537)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1915/
........
Merged revisions 368405 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 368407 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368421 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When remotely bridging calls with directmedia, Asterisk would check
the address of the peers/users holding directmedia ACLs (set via
directmediapermit/directmediadeny) instead of the bridged peer. This
is similar to r366547, but trunk specific and involves changes to
the rtpengine instead of just chan_sip.
(closes issue AST-876)
review: https://reviewboard.asterisk.org/r/1924/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Uncovered a nasty reference leak while I was writing some changes to
chan_dahdi/sig_analog. Slapped myself around a bit after seeing that I
performed the unchecked return causing this problem.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367419 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes to situations that could cause the CEL LINKEDID_END event to
be missed.
1) During a core stop gracefully, modules are unloaded when ast_active_channels
== 0. The LINKDEDID_END event fires during the channel destructor. This means
that occasionally, the cel_* module will be unloaded before the channel is
destroyed. It seemed generally useful to wait until the refcount of all
channels == 0 before unloading, so I added a channel counter and used it in the
shutdown code.
2) During a masquerade, ast_channel_change_linkedid is called. It calls
ast_cel_check_retire_linkedid which unrefs the linkedid in the linkedids
container in cel.c. It didn't ref the new linkedid. Now it does.
Review: https://reviewboard.asterisk.org/r/1900/
........
Merged revisions 367292 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367299 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change accommodates two methods by which calls can be directed to
a user's voicemail.
* Incoming calls can be redirected to any user's voicemail.
* Established calls can be blind transferred to any user's voicemail.
Digium phones indicate the desire to direct a call to voicemail by using
a Diversion header with a reason parameter of "send_to_vm".
This patch adds the "send_to_vm" reason as a valid redirecting reason. In
addition, chan_sip.c has been modified to update redirecting information
on the transferred channel by reading a Diversion header on a REFER request.
(closes issue AST-871)
Reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/1925
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This addresses core findings 4 and 6.
Moises Silva helped me by stating that a break could be
safely added to the case where it is added in chan_dahdi.c
In say.c, I have added a comment indicating that static analysis
complains but that it is currently unknown if this is correct.
This fixes all core findings of this type.
(closes issue ASTERISK-19662)
reported by Matthew Jordan
........
Merged revisions 367027 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367028 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SSL_CTX structures were allocated but never freed. This was a bigger
issue for clients than servers since new SSL_CTX structures could be
allocated for each connection. Servers, on the other hand, typically
set up a single SSL_CTX for their lifetime.
This is solved in two ways:
1. In __ssl_setup(), if a tcptls_cfg has an ssl_ctx on it, it is
freed so that a new one can take its place.
2. A companion to ast_ssl_setup() called ast_ssl_teardown() has
been added so that servers can properly free their SSL_CTXs.
(issue ASTERISK-19278)
........
Merged revisions 367002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367003 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds to what was fixed in r366880. Specifically, it addresses the
following:
* chan_sip: dispose of an allocated frame in off nominal code paths in
sip_rtp_read
* func_odbc: when disposing of an allocated resultset, ensure that any rows
that were appended to that resultset are also disposed of
* cli: free the created return string buffer in another off nominal code
path
* chan_dahdi: free a frame that was allocated by the dsp layer if we choose
not to process that frame
(issue ASTERISK-19665)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1922/
........
Merged revisions 366944 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366948 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
