https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r312461 | rmudgett | 2011-04-01 16:31:39 -0500 (Fri, 01 Apr 2011) | 25 lines
CallCompletionRequest()/CallCompletionCancel() exit non-zero if fail.
The CallCompletionRequest()/CallCompletionCancel() dialplan applications
exit nonzero on normal failure conditions. The nonzero exit causes the
dialplan to hangup immediately. The dialplan author has no opportunity to
report success/failure to the user.
* Made always return zero so the dialplan can continue.
* Made set CC_REQUEST_RESULT/CC_REQUEST_REASON and
CC_CANCEL_RESULT/CC_CANCEL_REASON channel variables respectively. Also
documented the values set.
* Reduced the warning about no core instance in CallCompletionCancel() to
a debug message. It is a normal event and should not be output at the
WARNING level.
(closes issue #18763)
Reported by: p_lindheimer
Patches:
ccss.patch uploaded by p lindheimer (license 558) Modified
Tested by: p_lindheimer, rmudgett
JIRA SWP-3042
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312462 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In chan_dahdi.conf, the user can now use length 4 patterns in addition to the usual length 2 patterns. The s
ntax remains the same and the method used to track the pattern history will only change when using the length
4 patterns.
(closes issue SWP-3250)
Code:
jrose
rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r310902 | twilson | 2011-03-16 12:19:57 -0500 (Wed, 16 Mar 2011) | 43 lines
Merged revisions 310889 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r310889 | twilson | 2011-03-16 12:03:27 -0500 (Wed, 16 Mar 2011) | 36 lines
Merged revisions 310888 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r310888 | twilson | 2011-03-16 11:58:42 -0500 (Wed, 16 Mar 2011) | 29 lines
Don't delay DTMF in core bridge while listening for DTMF features
This patch is mostly the work of Olle Johansson. I did some cleanup and
added the silence generating code if transmit_silence is set.
When a channel listens for DTMF in the core bridge, the outbound DTMF is not
sent until we have received DTMF_END. For a long DTMF, this is a disaster. We
send 4 seconds of DTMF to Asterisk, which sends no audio for those 4 seconds.
Some products see this delay and the time skew on RTP packets that results and
start ignoring the audio that is sent afterward.
With this change, the DTMF_BEGIN frame is inspected and checked. If it matches
a feature code, we wait for DTMF_END and activate the feature as before. If
transmit_silence=yes in asterisk.conf, silence is sent if we paritally match a
multi-digit feature. If it doesn't match a feature, the frame is forwarded
along with the DTMF_END without delay. By doing it this way, DTMF is not delayed.
(closes issue #15642)
Reported by: jasonshugart
Patches:
issue_15652_dtmf_ast-1.4.patch.txt uploaded by twilson (license 396)
Tested by: globalnetinc, jde
(closes issue #16625)
Reported by: sharvanek
Review: https://reviewboard.asterisk.org/r/1092/
Review: https://reviewboard.asterisk.org/r/1125/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@310941 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r310636 | rmudgett | 2011-03-14 11:50:59 -0500 (Mon, 14 Mar 2011) | 39 lines
Merged revisions 310635 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r310635 | rmudgett | 2011-03-14 11:47:54 -0500 (Mon, 14 Mar 2011) | 32 lines
Merged revisions 310633 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r310633 | rmudgett | 2011-03-14 11:38:24 -0500 (Mon, 14 Mar 2011) | 25 lines
"Caller*ID failed checksum" on Wildcard TDM2400P and TDM410
The last character in the caller id message is getting a framing error.
The checksum is the last character in the message. A framing error in the
checksum could be because:
1) The sender did not send a full stop bit.
2) The sender cut off the FSK carrier too soon.
3) The sender opted to send zero of the specified zero to 10 trailing mark
bits and round-off errors in the code resulted in the code not being where
it thought it was in the demodulated bit stream.
Bit 8 of 'b' is set when parity error.
Bit 9 of 'b' is set when framing error.
Made ignore the framing and parity error bits if the errored character is
the checksum. We can tolerate a framing/parity error there. The checksum
character validates the message.
(closes issue #18474)
Reported by: nivek
Patches:
callerid.c.1.patch uploaded by nivek (license 636) (with modifications)
Tested by: nivek
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@310637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r310287 | alecdavis | 2011-03-11 19:47:44 +1300 (Fri, 11 Mar 2011) | 17 lines
remote_bridge_loop: prevent segfault when after transfer of IAX2 of DAHDI call
If the channel condition is one of the following after breaking out of the loop, don't try to update_peer
(where x = 0/1)
1). ZOMBIE
2). cx->tech_pvt != pvtx
3). gluex != ast_rtp_instance_get_glue(cx->tech->type))
(closes issue #18781)
Reported by: alecdavis
Patches:
bug18781.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, ZX81
Review: https://reviewboard.asterisk.org/r/1128/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@310288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r310240 | twilson | 2011-03-10 10:05:45 -0600 (Thu, 10 Mar 2011) | 13 lines
Add \r\n to remaining http headers passed to ast_http_send
r309204 changed the behavior of ast_http_send. It now requires headers
to be passed with trailing \r\n. This change updates the remaining
instances in the code that did not pass the \r\n.
(closes issue #18186)
Reported by: nivaldomjunior
Patches:
res_phoneprov.c.diff uploaded by lathama (license 1028)
manager.diff.txt uploaded by twilson (license 396)
Tested by: lathama
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@310241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r309808 | tilghman | 2011-03-06 18:54:42 -0600 (Sun, 06 Mar 2011) | 14 lines
Merged revisions 309251 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309251 | tilghman | 2011-03-01 19:06:02 -0600 (Tue, 01 Mar 2011) | 7 lines
Revert previous 2 commits, and instead conditionally redefine the same macro used in flex 2.5.35 that clashed with our workaround.
Not surprisingly, the workaround was exactly the same code as was provided by
the Flex maintainers, albeit in two different places, in different macros.
This should fix the FreeBSD builds, which have an older version of Flex.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r309035 | tilghman | 2011-02-28 05:10:28 -0600 (Mon, 28 Feb 2011) | 15 lines
Merged revisions 309033-309034 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309033 | tilghman | 2011-02-28 04:43:12 -0600 (Mon, 28 Feb 2011) | 4 lines
A later version of flex already includes the fwrite workaround code, which if used twice causes a compilation error.
Detect whether Flex will compile without the workaround; if so, suppress our workaround code.
........
r309034 | tilghman | 2011-02-28 05:07:52 -0600 (Mon, 28 Feb 2011) | 2 lines
Clarify meaning, removing double negative (stupid!)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309036 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r308903 | rmudgett | 2011-02-24 15:38:41 -0600 (Thu, 24 Feb 2011) | 9 lines
Invalid read in ast_channel_set_caller_event().
Valgrind reported that ast_channel_set_caller_event() was reading data
from a freed buffer when using the pre_set structure.
Rearange things to pre-calculate the name and number pointer before
updating the caller party structure to see if the name or number was
changed.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308904 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r308815 | twilson | 2011-02-24 11:57:18 -0600 (Thu, 24 Feb 2011) | 26 lines
Merged revisions 308814 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r308814 | twilson | 2011-02-24 11:54:49 -0600 (Thu, 24 Feb 2011) | 19 lines
Merged revisions 308813 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r308813 | twilson | 2011-02-24 11:42:16 -0600 (Thu, 24 Feb 2011) | 12 lines
Don't broadcast FullyBooted to every AMI connection
The FullyBooted event should not be sent to every AMI connection every
time someone connects via AMI. It should only be sent to the user who
just connected.
(closes issue #18168)
Reported by: FeyFre
Patches:
bug0018168.patch uploaded by FeyFre (license 1142)
Tested by: FeyFre, twilson
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308816 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Guessed the log levels based on info that level 3
is the soft roof. Can we create a page / document
to define the levels?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Modern browsers are checking for the MIME Type of pages
and in some cases will not load a file if the type is
wrong.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307879 | rmudgett | 2011-02-15 10:13:55 -0600 (Tue, 15 Feb 2011) | 37 lines
No response sent for SIP CC subscribe/resubscribe request.
Asterisk does not send a response if we try to subscribe for call
completion after we have received a 180 Ringing. You can only subscribe
for call completion when the call has been cleared.
When we receive the 180 Ringing, for this call, its call-completion state
is 'CC_AVAILABLE'. If we then send a subscribe message to Asterisk, it
trys to change the call-completion state to 'CC_CALLER_REQUESTED'.
Because this is an invalid state change, it just ignores the message. The
only state Asterisk will accept our subscribe message is in the
'CC_CALLER_OFFERED' state.
Asterisk will go into the 'CC_CALLER_OFFERED' when the SIP client clears
the call by sending a CANCEL.
Asterisk should always send a response. Even if its a negative one.
The fix is to allow for the CCSS core to notify a CC agent that a failure
has occurred when CC is requested. The "ack" callback is replaced with a
"respond" callback. The "respond" callback has a parameter indicating
either a successful response or a specific type of failure that may need
to be communicated to the requester.
(closes issue #18336)
Reported by: GeorgeKonopacki
Tested by: mmichelson, rmudgett
JIRA SWP-2633
(closes issue #18337)
Reported by: GeorgeKonopacki
Tested by: mmichelson
JIRA SWP-2634
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r307536 | qwell | 2011-02-10 16:39:30 -0600 (Thu, 10 Feb 2011) | 22 lines
Merged revisions 307535 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r307535 | qwell | 2011-02-10 16:35:49 -0600 (Thu, 10 Feb 2011) | 15 lines
Merged revisions 307534 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r307534 | qwell | 2011-02-10 16:33:09 -0600 (Thu, 10 Feb 2011) | 8 lines
Remove color when executing commands via a remote console.
Essentially this makes '-x' imply '-n' on rasterisk. This was done in a
different and incomplete way previously, which I'm reverting here.
(issue #18776)
Reported by: alecdavis
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The nativeformats field was being overwritten when it should have been
appended too. This caused some format capabilities to be lost briefly and
some log warnings to be output.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307092 | qwell | 2011-02-08 15:24:01 -0600 (Tue, 08 Feb 2011) | 9 lines
Fix issue with verbose messages not showing on remote console.
This code was reworked recently, and since the logchannel list hadn't been
created yet at this point, and it was a verbose message, it was being dropped
on the floor. Now it'll continue on to where it should be handled.
(closes issue #18580)
Reported by: pabelanger
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307065 | mmichelson | 2011-02-08 15:13:08 -0600 (Tue, 08 Feb 2011) | 6 lines
Add a couple of useful channel variables for the CC recall macro.
CC_EXTEN and CC_CONTEXT will allow you to determine the channel
and context that will be called when the recall occurs.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Pass a MCID request to the bridged channel so the bridged channel can send
it to the network.
The ability to send the MCID request on an ISDN span is enabled with the
new chan_dahdi.conf mcid_send option.
JIRA SWP-2845
JIRA ABE-2736
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r306674 | twilson | 2011-02-07 14:43:22 -0800 (Mon, 07 Feb 2011) | 24 lines
Merged revisions 306673 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r306673 | twilson | 2011-02-07 14:40:20 -0800 (Mon, 07 Feb 2011) | 17 lines
Merged revisions 306672 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r306672 | twilson | 2011-02-07 14:35:20 -0800 (Mon, 07 Feb 2011) | 10 lines
Don't try to pickup a call in the middle of a masquerade
If A calls B which doesn't answer and C & D both try to do a call pickup, it is
possible for ast_pickup_call to answer the call, then fail to masquerade one of
the calls because the other one is already in the process of masquerading. This
patch checks to see if the channel is in the process of masquerading before
call before selecting it for a pickup.
Review: https://reviewboard.asterisk.org/r/1094/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r306575 | mmichelson | 2011-02-07 11:36:56 -0600 (Mon, 07 Feb 2011) | 9 lines
Rearrange a bit of code in the generic CC recall operation.
By waiting to call the callback macro after the CC_INTERFACES,
extension, priority, and context have been set, this information
can be accessed more easily within the callback macro.
Reported by Philippe Lindheimer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The logic got reversed, oops. Works properly now when multiple blackfilters are
present.
(closes issue #18283)
Reported by: telecos82
Patches:
ast_managereventfilter.patch uploaded by telecos82 (license 687)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306432 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r306124 | jpeeler | 2011-02-03 14:50:48 -0600 (Thu, 03 Feb 2011) | 17 lines
Merged revisions 306123 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r306123 | jpeeler | 2011-02-03 14:49:48 -0600 (Thu, 03 Feb 2011) | 10 lines
Set exception on channel in parking thread when POLLPRI event detected.
This is done just to make the code be equivalent to the old select code. As
noted in 303106 the same issue was already fixed in this branch, but the
exception was not set on the channel in the case of POLLPRI. The reason that
this did not cause a problem here is because in 122923 the check in __ast_read
to check the exception flag was removed.
(related to #18637)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306125 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r305923 | rmudgett | 2011-02-02 18:24:40 -0600 (Wed, 02 Feb 2011) | 24 lines
Merged revisions 305889 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305889 | rmudgett | 2011-02-02 18:15:07 -0600 (Wed, 02 Feb 2011) | 17 lines
Merged revisions 305888 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305888 | rmudgett | 2011-02-02 18:02:43 -0600 (Wed, 02 Feb 2011) | 8 lines
Minor AST_FRAME_TEXT related issues.
* Include the null terminator in the buffer length. When the frame is
queued it is copied. If the null terminator is not part of the frame
buffer length, the receiver could see garbage appended onto it.
* Add channel lock protection with ast_sendtext().
* Fixed AMI SendText action ast_sendtext() return value check.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r305247 | qwell | 2011-01-31 16:25:23 -0600 (Mon, 31 Jan 2011) | 7 lines
Add alternative name for config option.
The SIP sample configuration had "tlscadir" as the option name, but chan_sip
used the more correct "tlscapath". Now both are accepted.
Discovered (sort of) by a user on IRC in #asterisk
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
