https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182808 | kpfleming | 2009-03-17 20:55:22 -0500 (Tue, 17 Mar 2009) | 5 lines
Improve the build system to *properly* remove unnecessary symbols from the runtime global namespace. Along the way, change the prefixes on some internal-only API calls to use a common prefix.
With these changes, for a module to export symbols into the global namespace, it must have *both* the AST_MODFLAG_GLOBAL_SYMBOLS flag and a linker script that allows the linker to leave the symbols exposed in the module's .so file (see res_odbc.exports for an example).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182826 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This does not change any behavior, but moves the frames from the local frame
list back to the channel read queue using an O(n) algorithm instead of O(n^2).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182553 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_answer(), when supplied a delay before returning to the caller, use ast_safe_sleep() to implement the delay. Unfortunately during this time any incoming frames are discarded, which is problematic for T.38 re-INVITES and other sorts of channel operations.
When a delay is not passed to ast_answer(), it still delays for up to 500 milliseconds, waiting for media to arrive. Again, though, it discards any control frames, or non-voice media frames.
This patch rectifies this situation, by storing all incoming frames during the delay period on a list, and then requeuing them onto the channel before returning to the caller.
http://reviewboard.digium.com/r/196/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182449 | tilghman | 2009-03-17 00:50:52 -0500 (Tue, 17 Mar 2009) | 7 lines
Fix race in astdb
The underlying db1 implementation does not fully isolate the pages retrieved
from astdb, so the lock protecting accesses needs to be extended until the
copy from the shared memory structure is done.
(closes issue #14682)
Reported by: makoto
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For a channel that is not yet answered this API call will wait
until a voice frame is received on the channel before returning.
It does this by waiting for frames on the channel and reading them
in. The frames read in were not freed when they should have been.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181990 | mmichelson | 2009-03-13 12:12:32 -0500 (Fri, 13 Mar 2009) | 35 lines
Check the DYNAMIC_FEATURES of both the chan and peer when interpreting DTMF.
Dynamic features defined in the applicationmap section of features.conf allow
one to specify whether the caller, callee, or both have the ability to use the
feature. The documentation in the features.conf.sample file could be interpreted
to mean that one only needs to set the DYNAMIC_FEATURES channel variable on the
calling channel in order to allow for the callee to be able to use the features
which he should have permission to use. However, the DYNAMIC_FEATURES variable
would only be read from the channel of the participant that pressed the DTMF
sequence to activate the feature. The result of this was that the callee was
unable to use dynamic features unless the dialplan writer had taken measures
to be sure that the DYNAMIC_FEATURES variable was set on the callee's channel.
This commit changes the behavior of ast_feature_interpret to concatenate the
values of DYNAMIC_FEATURES from both parties involved in the bridge. The features
themselves determine who has permission to use them, so there is no reason to believe
that one side of the bridge could gain the ability to perform an action that they
should not have the ability to perform.
Kevin Fleming pointed out on the asterisk-users list that the typical way that this
was worked around in the past was by setting _DYNAMIC_FEATURES on the calling channel
so that the value would be inherited by the called channel. While this works, the
documentation alone is not enough to figure out why this is necessary for the callee
to be able to use dynamic features. In this particular case, changing the code to match
the documentation is safe, easy, and will generally make things easier for people for
future installations.
This bug was originally reported on the asterisk-users list by David Ruggles.
(closes issue #14657)
Reported by: mmichelson
Patches:
14657.patch uploaded by mmichelson (license 60)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, only 5 columns were displayed, and if a translation time exceeded
99,999 useconds, it would be displayed as 0, instead of its actual time.
(closes issue #14532)
Reported by: pj
Patches:
20090311__bug14532.diff.txt uploaded by tilghman (license 14)
Tested by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181423 | russell | 2009-03-11 16:42:58 -0500 (Wed, 11 Mar 2009) | 9 lines
Make code that updates BRIDGEPEER variable thread-safe.
It is not safe to read the name field of an ast_channel without the channel
locked. This patch fixes some places in channel.c where this was being done,
and lead to crashes related to masquerades.
(closes issue #14623)
Reported by: guillecabeza
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The main problem here was that cstdlib was undefining free thereby causing the
proper debug macros to not be used. ast_h323.cxx has been changed to call
ast_free instead to avoid the issue.
A few other issues were addressed:
- There were a few instances of functions improperly passing ast_free instead
of ast_free_ptr.
- Some clean up was done to avoid the debug macros intentionally being redefined.
(copied below from Kevin's commit, appreciate the help)
- disable astmm.h from doing anything when STANDALONE is defined, which is used
by the tools in the utils/ directory that use parts of Asterisk header files in
hackish ways; also ensure that utils/extconf.c and utils/conf2ael.c are
compiled with STANDALONE defined.
(closes issue #13593)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Copied from my review board description:
This is a continuation of the API changes documentation started for describing
changes between releases. Most of the API changes were pretty simple needing
only to be brought to attention via the new "Asterisk API Changes" list.
However, if you see anything that needs further explanation feel free to
supplement what is there. The current method of documenting is to add (in the
header file): \version <ver number> <description of changes> and then to add
the function to the change list in doxyref.h on the AstAPIChanges page. I also
made sure all the functions that were newly added were tagged with \since
1.6.1. I think this is a good habit to start both for the historical aspect as
well as for the future ability to easily add a "New Asterisk API" page.
Review: http://reviewboard.digium.com/r/190/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180719 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180532 | dvossel | 2009-03-06 11:19:55 -0600 (Fri, 06 Mar 2009) | 9 lines
Fix handling of backreferences for ENUM lookups
enum.c did not handle regex backtraces correctly. The '\1' in the regex is a backreference that requires a pattern match to be inserted. The way the code used to work is that it would find the backreference and insert the entire input string minus the '+'. This is incorrect. The regexec() function takes in a variable called pmatch which is an array of structs containing the start and end indexes for each backreference substring. The original code actually passed the pmatch array pointer into regexec but never did anything with it. Now when a backtrace is found, the backtrace number is looked up in the pmatch array and the correct substring is inserted.
(closes issue #14576)
Reported by: chris-mac
Review: http://reviewboard.digium.com/r/187/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180372 | kpfleming | 2009-03-05 12:22:16 -0600 (Thu, 05 Mar 2009) | 9 lines
Fix problems when RTP packet frame size is changed
During some code analysis, I found that calling ast_rtp_codec_setpref() on an ast_rtp session does not work as expected; it does not adjust the smoother that may on the RTP session, in fact it summarily drops it, even if it has data in it, even if the current format's framing size has not changed. This is not good.
This patch changes this behavior, so that if the packetization size for the current format changes, any existing smoother is safely updated to use the new size, and if no smoother was present, one is created. A new API call for smoothers, ast_smoother_reconfigure(), was required to implement these changes.
Review: http://reviewboard.digium.com/r/184/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180373 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit brings in the bridging core, bridging technologies,
and the ConfBridge application.
For usage information on the ConfBridge application please see
the output of "core show application ConfBridge" from the CLI.
For API documentation please see the doxygen page describing the
architecture and the documentation for each API call.
Review: http://reviewboard.digium.com/r/93/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180369 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In app.c, ast_app_getdata is called to stream the prompts and receive DTMF input. If ast_app_getdata() receives an empty string caused by the user inputing the end of string character, in this case '#', it should break from the prompt loop and return to app_read, but instead it cycles through all the prompts. I've added a return value for this special case in ast_readstring() which uses an enum I've delcared in apps.h. This enum is now used as a return value for ast_app_getdata().
(closes issue #14279)
Reported by: Marquis
Patches:
fix_app_read.patch uploaded by Marquis (license 32)
read-ampersanmd.patch2 uploaded by dvossel (license 671)
Tested by: Marquis, dvossel
Review: http://reviewboard.digium.com/r/177/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
I had some work to do to port these changes to trunk; the
check_expr stuff hasn't been updated here for quite some
time, it appears. I added some more tests to the check_expr2
suite. I had to play around with the makefile a bit, etc.
I added STANDALONE2 #ifdefs to ast_expr2.y so as not to
conflict structure with aelparse.
........
r179807 | murf | 2009-03-03 11:11:34 -0700 (Tue, 03 Mar 2009) | 19 lines
These changes allow AEL to better check ${} constructs within $[...], that are concatenated with text.
I modified and added rules in ast_expr2.fl to better handle
the concatenations.
I added some default routines to ast_expr2.y so the standalone would
compile. It also looks like I haven't run this thru bison since 2.1, so
it's good to get this updated.
The Makefile has comments added now for check_expr2 and check_expr to
explain what they are for, and how to run them.
The testexpr2s stuff has been removed, in favor of check_expr2.
expr2.testinput has been updated to include the two expressions
that inspired these changes (from mcnobody on #asterisk this morning)
The regression has been run and all looks well.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179973 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179840 | file | 2009-03-03 14:27:09 -0400 (Tue, 03 Mar 2009) | 9 lines
Do not assume that the bridge_cdr is still attached to the channel when the 'h' exten is finished executing.
It is possible for a masquerade operation to occur when the 'h' exten is operating. This operation moves
the CDR records around causing the bridge_cdr to no longer exist on the channel where it is expected to.
We can not safely modify it afterwards because of this, so don't even try.
(closes issue #14564)
Reported by: meric
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179741 | russell | 2009-03-03 10:45:46 -0600 (Tue, 03 Mar 2009) | 6 lines
Ensure chan->fdno always gets reset to -1 after handling a channel fd event.
Since setting fdno to -1 had to be moved, a couple of other code paths that
do process an fd event return early and do not pass through the code path
where it was moved to. So, set it to -1 in a few other places, too.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179671 | file | 2009-03-03 10:38:09 -0400 (Tue, 03 Mar 2009) | 3 lines
Move where fdno is set to the default value to *after* the read callback of the channel driver is called.
We have to do this as the underlying channel driver may need the fdno value to determine what to read.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179608 | russell | 2009-03-03 07:53:52 -0600 (Tue, 03 Mar 2009) | 9 lines
Make it easier to detect an improper call to ast_read().
When you call ast_waitfor() on a channel, the index into the channel fds array
that holds the file descriptor that poll() determines has input available is
stored in fdno. This patch clears out this value after a call to ast_read()
and also reports errors if ast_read() is called without an fdno set.
From a discussion on the asterisk-dev list.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179609 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179536 | jpeeler | 2009-03-02 17:54:39 -0600 (Mon, 02 Mar 2009) | 15 lines
Fix bridging regression from commit 176701
This fixes a bad regression where the bridge would exit after an attended
transfer was made. The problem was due to nexteventts getting set after the
masquerade which caused the bridge to return AST_BRIDGE_COMPLETE.
(closes issue #14315)
Reported by: tim_ringenbach
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179468 | tilghman | 2009-03-02 17:09:01 -0600 (Mon, 02 Mar 2009) | 10 lines
When ending a recording with silence detection, remember to reduce the duration.
The end of the recording is correspondingly trimmed, but the duration was not
trimmed by the number of seconds trimmed, so the saved duration was necessarily
longer than the actual soundfile duration.
(closes issue #14406)
Reported by: sasargen
Patches:
20090226__bug14406.diff.txt uploaded by tilghman (license 14)
Tested by: sasargen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179461 | russell | 2009-03-02 16:58:18 -0600 (Mon, 02 Mar 2009) | 8 lines
Ensure that only one thread is calling ast_settimeout() on a channel at a time.
For example, with an IAX2 channel, you can have both the channel thread and the
chan_iax2 processing threads calling this function, and doing so twice at the
same time is a bad thing.
(Found in a debugging session with dvossel and mmichelson)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179462 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
In this case, it's just a matter of reducing the default timeouts from 2000
to 1000 msec, as the max def feature digit timeout is no longer halved.
........
r178956 | murf | 2009-02-26 14:27:32 -0700 (Thu, 26 Feb 2009) | 18 lines
This change moves the default feature digit timeout to 1000 ms from the previous default of 500.
As per bug 14515, a dev discussion arrived at a "mediated concensus"
of a default feature digit timeout of 1.0 sec. Some voted for 1300;
ctooley thought 1500 for distracted phone users in phone booths;
kpfleming put his foot down at 1.0 sec.
Users who found the previous default max delay of 250 msec perfect,
are welcome to override the new default. Notice that I said that
250 msec was the default; wait a minute, you might say, the config
file said it was 500 msec!; well, because of the bug fix for 14515,
we found that 500 msec was actually enforcing a max of 250. The bug
fix would restore 500 msec, but we felt even that was a bit tight
for most users... 2000 msec was pushed earlier by mmichelson, so
that reduces to 1000 msec after the bug fix. Enjoy!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r178804 | murf | 2009-02-26 10:09:03 -0700 (Thu, 26 Feb 2009) | 28 lines
This patch prevents the feature detection timeout from being cut in half.
Because the ast_channel_bridge() call will return 0 and pass
a frame pointer for both DTMF_BEGIN and DTMF_END, the feature_timer
field in hte config struct is getting decremented twice, which
effectively cuts the digittimeout in half. I added conditions
to the if statement to only let DTMF_END frames to flow thru,
which solved the problem. Also, when the frame pointer is null,
let control flow thru-- this usually happens on timeouts. I added
a comment to the code to explain what's going on and why.
Many thanks to sodom for reporting this problem. Personnally, it always seemed
like something was wrong with the featuredigittimeout, but I never
could quite decide what... and was too busy to investigate.
This bug forced the issue, and now we know.
Sodom had other issues in 14515, but I couldn't reproduce them. If
he still has problems, and wants to get them solved, he is welcome
to reopen 14515.
(closes issue #14515)
Reported by: sodom
Patches:
14515.patch uploaded by murf (license 17)
Tested by: murf, sodom
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r178141 | russell | 2009-02-23 17:09:01 -0600 (Mon, 23 Feb 2009) | 14 lines
Fix infinite DTMF when a BEGIN is received without an END.
This commit is related to rev 175124 of 1.4 where a previous attempt was made
to fix this problem. The problem with the previous patch was that the inserted
code needed to go _before_ setting the lastrxts to the current timestamp.
Because those were the same, the dtmfcount variable was never decremented, and
so the END was never sent.
In passing, I removed the dtmfsamples variable which was completed unused. I
also removed a redundant setting of the lastrxts variable.
(closes issue #14460)
Reported by: moliveras
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178142 65c4cc65-6c06-0410-ace0-fbb531ad65f3
