This patch introduces a function to do careful writes on a file stream which
will handle timeouts and partial writes. It is currently used in AMI to
address the issue that has been reported. However, there are probably a few
other places where this could be used.
(closes issue #13546)
Reported by: srt
Tested by: russell
http://reviewboard.digium.com/r/104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A crash was brought up on the bugtracker. The first run through valgrind
was full of legitimate complaints of uninitialized values in func_timeout when
setting a response timeout. These were fixed but the crash persisted.
A second run through showed the real problem. The reference counting used
for filestreams was incorrect because there were some missing increments
when a frame was read from a format module.
(closes issue #14118)
Reported by: blitzrage
Patches:
14118v2.patch uploaded by putnopvut (license 60)
Tested by: blitzrage
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166267 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This function is being added as a method to allow for
an audiohook to move to a new channel during a channel
masquerade. The most obvious use for such a facility is
for MixMonitor when a transfer is performed. Prior to
the addition of this functionality, if a channel
running MixMonitor was transferred by another party, then
the recording would stop once the transfer had completed.
By using AUDIOHOOK_INHERIT, you can make MixMonitor
continue recording the call even after the transfer
has completed.
It has also been determined that since this is seen
by most as a bug fix and is not an invasive change,
this functionality will also be backported to 1.4 and
merged into the 1.6.0 branches, even though they are
feature-frozen.
(closes issue #13538)
Reported by: mbit
Patches:
13538.patch uploaded by putnopvut (license 60)
Tested by: putnopvut
Review: http://reviewboard.digium.com/r/102/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r165796 | russell | 2008-12-18 15:39:25 -0600 (Thu, 18 Dec 2008) | 11 lines
Make ast_carefulwrite() be more careful.
This patch handles some additional cases that could result in partial writes
to the file description. This was done to address complaints about partial
writes on AMI.
(issue #13546) (more changes needed to address potential problems in 1.6)
Reported by: srt
Tested by: russell
Review: http://reviewboard.digium.com/r/99/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is part of an effort to completely remove AST_PBX_KEEPALIVE and other
similar return codes from the source. While this usage was perfectly safe,
there are others that are problematic. Since we know ahead of time that
we do not want to PBX to destroy the channel, the PBX API has been changed
so that information can be provided as an argument, instead, thus removing
the need for the KEEPALIVE return value.
Further changes to get rid of KEEPALIVE and related code is being done by
murf. There is a patch up for that on review 29.
Review: http://reviewboard.digium.com/r/98/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165723 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r165591 | file | 2008-12-18 13:11:42 -0400 (Thu, 18 Dec 2008) | 4 lines
Only care about a compatible codec for early bridging if we are actually bridging to another channel. If we are not we actually want to bring the audio back to us.
(closes issue #13545)
Reported by: davidw
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165599 65c4cc65-6c06-0410-ace0-fbb531ad65f3
access 'struct ast_str' members, but this must only be used inside the API implementation.
(closes issue #14098)
Reported by: eliel
Patches:
ast_str.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165502 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164881 | russell | 2008-12-16 15:38:29 -0600 (Tue, 16 Dec 2008) | 9 lines
Fix an issue where DEBUG_THREADS may erroneously report that a thread
is exiting while holding a lock.
If the last lock attempt was a trylock, and it failed, it will still be in the
list of locks so that it can be reported.
(closes issue #13219)
Reported by: pj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164882 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164806 | russell | 2008-12-16 14:35:25 -0600 (Tue, 16 Dec 2008) | 9 lines
Add "restart gracefully" to the AMI blacklist of CLI commands.
"module unload" was already identified as a command that can not be used
from the AMI. "restart gracefully" effectively unloads all modules, and will
run in to the same problems.
(closes issue #13894)
Reported by: kernelsensei
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: toc
Tested by: murf
OK, Well this issue has had its share of flip-flopping.
I found the following:
1. the code in question, in ext_cmp1 in pbx.c, would not
allow two extensions that vary only by any dashes contained
within them, to be defined in the same context.
2. for input dialstrings, dashes are NOT ignored.
So, skipping them when sorting patterns seemed a bit silly.
Thus, you might declare ext 891 in a context, but
if you try dialing 8-9-1, it will NOT match 891.
So, I proposed to remove the code from ext_cmp1 to
skip the spaces and dashes. Just kept us from
declaring 891 and 8-9-1 in the same context,
forcing users to generate otherwise uselessly
obfuscated dialplan code to get the same effect.
Then, I tried out 1.4, and found that:
1. you can declare 891 and 8-9-1 in the
same context!
2. You can't define 891, and have 8-9-1 match
it! Nor can you define 8-9-1, and have 891
match it!
So, it appears that my proposal simply restores
the pbx to behaving as it did in 1.4.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164736 | russell | 2008-12-16 11:06:29 -0600 (Tue, 16 Dec 2008) | 14 lines
Fix memory leak and invalid reporting issues with DEBUG_THREADLOCALS.
One issue was that the ast_mutex_* API was being used within the context of the
thread local data destructors. We would go off and allocate more thread local data
while the pthread lib was in the middle of destroying it all. This led to a memory
leak.
Another issue was an invalid argument being provided to the the object_add
API call.
(closes issue #13678)
Reported by: ys
Tested by: Russell
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164737 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164201 | russell | 2008-12-15 08:31:37 -0600 (Mon, 15 Dec 2008) | 31 lines
Handle a case where a call can be bridged to a channel that is still ringing.
The issue that was reported was about a case where a RINGING channel got
redirected to an extension to pick up a call from parking. Once the parked
call got taken out of parking, it heard silence until the other side answered.
Ideally, the caller that was parked would get a ringing indication. This patch
fixes this case so that the caller receives ringback once it comes out of
parking until the other side answers.
The fixes are:
- Make sure we remember that a channel was an outgoing channel when doing
a masquerade. This prevents an erroneous ast_answer() call on the channel,
which causes a bogus 200 OK to be sent in the case of SIP.
- Add some additional comments to explain related parts of code.
- Update the handling of the ast_channel visible_indication field. Storing
values that are not stateful is pointless. Control frames that are events
or commands should be ignored.
- When a bridge first starts, check to see if the peer channel needs to be
given ringing indication because the calling side is still ringing.
- Rework ast_indicate_data() a bit for the sake of readability.
(closes issue #13747)
Reported by: davidw
Tested by: russell
Review: http://reviewboard.digium.com/r/90/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163761 | tilghman | 2008-12-12 16:03:10 -0600 (Fri, 12 Dec 2008) | 7 lines
Simple fix for Ctrl-C not immediately exiting Asterisk, but also add a
pointer inside editline to look back to asterisk.c, so others don't spend
as much time as I did looking (in the wrong place) for the appropriate
function.
Reported by: ZX81, via the #asterisk-users channel
Fixed by: me (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163762 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The name "ser" was used in a lot of places. However, it is a relic from when
the struct was a server_instance, not a session_instance. It was renamed since
it represents both a server or client connection.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163670 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163448 | russell | 2008-12-12 07:44:08 -0600 (Fri, 12 Dec 2008) | 26 lines
Resolve issues that could cause DTMF to be processed out of order.
These changes come from team/russell/issue_12658
1) Change autoservice to put digits on the head of the channel's frame readq
instead of the tail. If there were frames on the readq that autoservice
had not yet read, the previous code would have resulted in out of order
processing. This required a new API call to queue a frame to the head
of the queue instead of the tail.
2) Change up the processing of DTMF in ast_read(). Some of the problems
were the result of having two sources of pending DTMF frames. There
was the dtmfq and the more generic readq. Both were used for pending
DTMF in various scenarios. Simplifying things to only use the frame
readq avoids some of the problems.
3) Fix a bug where a DTMF END frame could get passed through when it
shouldn't have. If code set END_DTMF_ONLY in the middle of digit emulation,
and a digit arrived before emulation was complete, digits would get
processed out of order.
(closes issue #12658)
Reported by: dimas
Tested by: russell, file
Review: http://reviewboard.digium.com/r/85/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163383 | tilghman | 2008-12-11 17:35:55 -0600 (Thu, 11 Dec 2008) | 9 lines
When a Ctrl-C or Ctrl-D ends a remote console, on certain shells, the terminal
is messed up. By intercepting those events with a signal handler in the remote
console, we can avoid those issues.
(closes issue #13464)
Reported by: tzafrir
Patches:
20081110__bug13464.diff.txt uploaded by Corydon76 (license 14)
Tested by: blitzrage
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The conversion to use ast_check_hangup() everywhere instead of checking the softhangup
flag directly introduced this problem. The issue is that ast_check_hangup() checked
for tech_pvt to be NULL. Unfortunately, this will be NULL is some valid circumstances,
such as with a dummy channel.
The fix is simple. Don't check tech_pvt. It's pointless, because the code path that
sets this to NULL is when the channel hangup callback gets called. This happens inside
of ast_hangup(), which is the same function responsible for freeing the channel. Any
code calling ast_check_hangup() better not be calling it after that point, and if so,
we have a bigger problem at hand.
(closes issue #14035)
Reported by: erogoza
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163092 | russell | 2008-12-11 10:54:51 -0600 (Thu, 11 Dec 2008) | 11 lines
Fix an issue that made it so you could only have a single caller executing
a custom feature at a time. This was especially problematic when custom
features ran for any appreciable amount of time.
The fix turned out to be quite simple. The dynamic features are now stored
in a read/write list instead of a list using a mutex.
(closes issue #13478)
Reported by: neutrino88
Fix suggested by file
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163094 65c4cc65-6c06-0410-ace0-fbb531ad65f3
channel variables, and in any case, was redundant;
pbx_substitute_variables_helper ALREADY does substitution for global
variables.
(closes issue #13327)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162922 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162653 | file | 2008-12-10 12:05:29 -0400 (Wed, 10 Dec 2008) | 6 lines
Increment the sequence number on the end packets for RFC2833. After reading the RFC some more and doing some testing I agree with this change.
(closes issue #12983)
Reported by: vt
Patches:
dtmf_inc_seqnum_on_end_pkts.diff uploaded by vt (license 520)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After the nightly update of the documentation on asterisk.org, I'll post
an update to asterisk-dev with a pointer to the changes. This covers some
release branch and commit policy information. None of this should be a
surprise, since it's just documenting what we have already been doing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162413 | russell | 2008-12-09 16:17:39 -0600 (Tue, 09 Dec 2008) | 8 lines
Remove the test_for_thread_safety() function completely.
The test is not valid. Besides, if we actually suspected that recursive
mutexes were not working, we would get a ton of LOG_ERROR messages when
DEBUG_THREADS is turned on.
(inspired by a discussion on the asterisk-dev list)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162265 | mmichelson | 2008-12-09 14:28:44 -0600 (Tue, 09 Dec 2008) | 6 lines
If we fail to start a thread for the pbx to run in, we need to
be sure to decrease the number of active calls on the system.
This fix may relate to ABE-1713, but it is not certain yet.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162204 | file | 2008-12-09 15:47:07 -0400 (Tue, 09 Dec 2008) | 7 lines
Make sure that the timestamp for DTMF is not the same as the previous voice frame and do not send audio when transmitting DTMF as this confuses some equipment.
(closes issue #13209)
Reported by: ip-rob
Patches:
13209.diff uploaded by file (license 11)
Tested by: ip-rob, bujones
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r161948 | russell | 2008-12-09 08:52:25 -0600 (Tue, 09 Dec 2008) | 15 lines
Fix a problem with GROUP() settings on a masquerade.
The previous code carried over group settings from the old channel to the new
one. However, it did nothing with the group settings that were already on the
new channel. This patch removes all group settings that already existed on the
new channel.
I have a more complicated version of this patch which addresses only the most
blatant problem with this, which is that a channel can end up with multiple
group settings in the same category. However, I could not think of a use case
for keeping any of the group settings from the old channel, so I went this route
for now.
(closes AST-152)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Avoid printing the name of an argument in the [Arguments] tag if there is no description
for that argument.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
