https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r111391 | murf | 2008-03-27 07:03:28 -0600 (Thu, 27 Mar 2008) | 9 lines
These small documentation updates made in response to a query in
asterisk-users, where a user was using Playback, but needed the
features of Background, and had no idea that Background existed,
or that it might provide the features he needed. I thought the
best way to avert these kinds of queries was to provide "See Also"
references in all three of "Background", "Playback", "WaitExten".
Perhaps a project to do this with all related apps is in order.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111410 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r111245 | qwell | 2008-03-26 18:26:33 -0500 (Wed, 26 Mar 2008) | 9 lines
Remove excessive smoother optimization that was causing audio glitches (small "pops")
after (about 200ms later) an "incorrectly" sized frame was received.
While it would be very nice to keep this as optimized as possible, it makes no sense
for the smoother to be dropping random bits of audio like this. Isn't that the
whole point of a smoother?
Closes issue #12093.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111246 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Per comments from dimas:
1. The code now generates DTMF_BEGIN frames in addition to DTMF_END ones.
2. "quelching" rewritten - now each detector (MF/DTMF/generic tone) may mark fragment of a frame for suppression (squelching, muting) with a call to mute_fragment. Actual muting happens only once at the very end of ast_dsp_process where all marked fragments are zeroed. This way every detector sees original data in the frame without any piece of a frame being zeroed by a detector which was run before.
3. DTMF detector tries to "mute" one block before and one block after the block where actual tone was detected. Muting of previois block is something new for this patch. Obviously this operation is not always possible - if current frame does not contain data for previous block - it is too late. But at least we make our best.
Muting of next block was already done by the old code but it only affects part of the next block which is in the frame being processed. New code keeps this information in state structures so it will mute proper number of samples in the next frame(s) too.
4. Removed ast_dsp_digitdetect and ast_dsp_getdigits APIs because these are not used.
5. DSP API extended a bit - ast_dsp_was_muted() function added which returns true if DSP code was muting any fragment in the last frame. chan_zap uses this function to decide it needs to turn on confmute on the channel.
This is to replace AST_FRAME_DTMF 'm'/'u' (mute/unmute) functionality.
(closes issue #11968)
Reported by: dimas
Patches:
v2-11968-dsp.patch uploaded by dimas (license 88)
v4-11968-zap.patch uploaded by dimas (license 88)
Tested by: dimas, qwell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
change, it was possible to start Asterisk with the manager interface enabled, then
either comment out the enabled option or make manager.conf unopenable and the manager
interface would still be enabled.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110628 | file | 2008-03-25 11:37:35 -0300 (Tue, 25 Mar 2008) | 4 lines
Add an option (transmit_silence) which transmits silence during both Record() and DTMF generation. The reason this is an option is that in order to transmit silence we have to setup a translation path. This may not be needed/wanted in all cases.
(closes issue #10058)
Reported by: tracinet
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110395 | russell | 2008-03-20 18:13:56 -0500 (Thu, 20 Mar 2008) | 9 lines
Shorten the ast_waitfor() timeout from 500 ms to 50 ms in the autoservice thread.
This really should not make a difference except in very rare cases. That case would
be that all of the channels in autoservice are not generating any frames. In that
case, this change reduces the potential amount of time that a thread waits in
ast_autoservice_stop() for the autoservice thread to wrap back around to the beginning
of its loop.
(closes issue #12266, reported by dimas)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
other than 8 kHz. The issue here is that format modules give a "whennext" sample
value, which is used to calculate when to set a timer for to retrieve the next
frame. However, the zaptel timer operates on 8 kHz samples, so this must be taken
into account.
(another part of issue #12164, reported by milazzo and jsmith, patch by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
G.722 music on hold working for me.
(issue #12164, reported by milazzo and jsmith, patches by me)
res/res_musiconhold.c:
- I moved a single line so that the sample queue update happened before
ast_write(). The reason that this was a bug is that the G.722 frame
originally says it has 320 samples in it (which is correct). However,
when the frame is written to a channel that uses RTP, main/rtp.c modifies
the frame to cut the number of samples in half before it sends it on
the wire. This is to account for the stupid incorrect G.722 spec that
makes it so we have to lie about the number of samples with RTP. I should
probably go and re-work the RTP code so it doesn't modify the frame so
that a bug like this won't happen in the future. However, this change to
MOH is harmless.
main/channel.c:
- I made two fixes in regards to generator timing. Generators use samples
for timing. However, this code assumed 8 kHz samples. In one case, it was
a hard coded 160 samples, that is now written as the sample rate / 50. The
other place was dealing with timing a generator based on frames coming from
the other direction. However, that would have only worked if the sample
rates for the formats in both directions were the same. The code now takes
into account that the sample rates may differ, and scales the generator
samples accordingly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110019 | file | 2008-03-19 15:20:28 -0300 (Wed, 19 Mar 2008) | 6 lines
Make sure that the mark bit does not incorrectly cause video frame timestamps to be calculated as if they are audio frames.
(closes issue #11429)
Reported by: sperreault
Patches:
11429-frametype.diff uploaded by qwell (license 4)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110020 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r109908 | murf | 2008-03-19 09:41:13 -0600 (Wed, 19 Mar 2008) | 72 lines
(closes issue #11442)
Reported by: tzafrir
Patches:
11442.patch uploaded by murf (license 17)
Tested by: murf
I didn't give tzafrir very much time to test this, but if he does
still have remaining issues, he is welcome to
re-open this bug, and we'll do what is called for.
I reproduced the problem, and tested the fix, so I hope I
am not jumping by just going ahead and committing the fix.
The problem was with what file_save does with templates;
firstly, it tended to print out multiple options:
[my_category](!)(templateref)
instead of
[my_category](!,templateref)
which is fixed by this patch.
Nextly, the code to suppress output of duplicate declarations
that would occur because the reader copies inherited declarations
down the hierarchy, was not working. Thus:
[master-template](!)
mastervar = bar
[template](!,master-template)
tvar = value
[cat](template)
catvar = val
would be rewritten as:
;!
;! Automatically generated configuration file
;! Filename: experiment.conf (/etc/asterisk/experiment.conf)
;! Generator: Manager
;! Creation Date: Tue Mar 18 23:17:46 2008
;!
[master-template](!)
mastervar = bar
[template](!,master-template)
mastervar = bar
tvar = value
[cat](template)
mastervar = bar
tvar = value
catvar = val
This has been fixed. Since the config reader 'explodes' inherited
vars into the category, users may, in certain circumstances, see
output different from what they originally entered, but it should
be both correct and equivalent.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This does introduce a dependency on the GMime library for handling HTTP POSTs, but it is available in most distros.
If the library is present, then the compile flag for ENABLE_UPLOADS is enabled by default in menuselect.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109229 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r109226 | mmichelson | 2008-03-17 17:05:49 -0500 (Mon, 17 Mar 2008) | 12 lines
Fix a logic flaw in the code that stores lock info which is displayed
via the "core show locks" command. The idea behind this section of code was
to remove the previous lock from the list if it was a trylock that had failed.
Unfortunately, instead of checking the status of the previous lock, we were referencing
the index immediately following the previous lock in the lock_info->locks array.
The result of this problem, under the right circumstances, was that the lock which
we currently in the process of attempting to acquire could "overwrite" the previous lock
which was acquired. While this does not in any way affect typical operation, it *could*
lead to misleading "core show locks" output.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: mvanbaak
Tested by: murf, mvanbaak
Due to a bug that occurred when merge_contexts_and_delete scanned the "old" or existing contexts, and found a context
that doesn't exist in the new set, yet owned by a different registrar. The context is created in the new set, with the
old registrar, and and all the priorities and extens that have a different registrar are copied into it. But, not the
includes, ignorepats, and switches. I added code to do this immediately after the context is created.
This still leaves a logical hole in the code. If you define a context in two places, (eg. in extensions.conf and also
in extensions.ael), and they both have includes, but different in composition, no new context will be generated, and
therefore the 'old' includes, switches, and ignorepats will not be copied. I'd have added code to simply add any non-duplicates
into the 'new' context that had a different registrar, but there is one big complication: includes, and switches are definitely
order dependent. (ignorepats I'm not sure about). And we'll have to develop some sort of policy about how we
merge order dependent lists, especially if the intersection of the two sets is empty. (in other words, they do not have any
elements in common). Do the new go first, or the old? I've elected to punt this issue until a user complains. Hopefully,
this is pretty rare thing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108583 | russell | 2008-03-13 16:38:16 -0500 (Thu, 13 Mar 2008) | 11 lines
Fix another issue that was causing crashes in chanspy. This introduces a new
datastore callback, called chan_fixup(). The concept is exactly like the
fixup callback that is used in the channel technology interface. This callback
gets called when the owning channel changes due to a masquerade. Before this
was introduced, if a masquerade happened on a channel being spyed on, the
channel pointer in the datastore became invalid.
(closes issue #12187)
(reported by, and lots of testing from atis)
(props to file for the help with ideas)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Though this overflow is exploitable remotely, we are NOT issuing a security
advisory for this since in order to exploit the overflow, the attacker would
have to establish an authenticated manager session AND have the system privilege.
By gaining this privilege, the attacker already has more powerful weapons at his
disposal than overflowing a buffer with a malformed manager header, so the vulnerability
in this case really lies with the authentication method that allowed the attacker to
gain the system privilege in the first place.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
