Once an Optional API module is loaded it should stay loaded. Unloading
an optional API module runs the risk of a crash if something else is
using it. This patch causes all optional API providers to tell the
module loader not to unload except at shutdown.
ASTERISK-27389
Change-Id: Ia07786fe655681aec49cc8d3d96e06483b11f5e6
When allocate_subscription fails to initialize fields of the new sub it
calls destroy_subscription.
Change-Id: I5b79c915ec216dc00c13c1e4172137864a4bec85
When the identify_by option on an endpoint is set to ip it will
only be identified using the res_pjsip_endpoint_identifier_ip module.
This ensures that it is not mistakenly matched using the username of
the From header. To ensure behavior has not changed the default has
been changed to "username,ip" for the identify_by option.
ASTERISK-27206
Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd
create_outgoing_sdp_stream was setting "addr_type = STR_IP6" only
when an ipv6 media_address was specified on the endpoint. If
rtp_ipv6 was set and ast_sip_get_host_ip_string returned an ipv6
address, we were leaving the addr_type set at the default of
STR_IP4. This caused the address type to be set incorrectly on the
"o" and "c" SDP attributes even though the address was set
correctly. Some clients don't like the mismatch.
* Removed the test for endpoint/media_address and now check all
addresses for ipv6.
ASTERISK-27198
Reported by: Martin Cisárik
Change-Id: I5214fc31b728117842243807e7927a319cf77592
Users of the API that res_xmpp provides expect that a
filter be available on the client at all times. When
OAuth authentication support was added this requirement
was not maintained.
This change merely moves the OAuth authentication to
after the filter is created, ensuring users of res_xmpp
can add things to the filter as needed.
ASTERISK-27346
Change-Id: I4ac474afe220e833288ff574e32e2b9a23394886
Prevent unload of the module as certain pjsip initialization functions
cannot be reversed. This required a reorder of the module_load so that
the non-reversable pjsip functions are not called until all potential
errors have been ruled out.
ASTERISK-24483
Change-Id: Iee900f20bdd6ee1bfe23efdec0d87765eadce8a7
Prevent unload of the module as certain pjsip initialization functions
cannot be reversed.
ASTERISK-24483
Change-Id: I94597ec8b8491f5af9c57bf66dbc3b078fe2d49d
PJSIP allows a domain name as external_media_address. This allows chan_pjsip to
be used behind a NAT with changing IP addresses. The IP address of that domain
is resolved to the c= line already. This change sets also the o= line to that
domain.
ASTERISK-27341 #close
Change-Id: I690163b6e762042ec38b3995aa5c9bea909d8ec4
Move ast_sip_add_usereqphone to be called after anonymization of URIs,
to prevent the user_eq_phone adding "user=phone" to URIs containing a
username that is not a phonenumber (RFC3261 19.1.1). An extra call to
ast_sip_add_usereqphone on the saved version before anonymization is
added to add user=phone" to the PAI.
ASTERISK-27047 #close
Change-Id: Ie5644bc66341b86dc08b1f7442210de2e6acdec6
ast_sip_add_usereqphone adds "user=phone" to the header every time is is
called without checking whether the param already exists. Preventing
this by searching to string representation of header for "user=phone".
ASTERISK-26988 #close
Change-Id: Ib84383b07254de357dc6a98d91fc1d2c2c3719e6
When "rewrite_contact" is enabled, the "max_contacts" count option can
block re-registrations because the source port from the endpoint can be
random. When the re-registration is blocked, the endpoint may give up
re-registering and require manual intervention.
* The "remove_existing" option now allows a registration to succeed by
displacing any existing contacts that now exceed the "max_contacts" count.
Any removed contacts are the next to expire. The behaviour change is
beneficial when "rewrite_contact" is enabled and "max_contacts" is greater
than one. The removed contact is likely the old contact created by
"rewrite_contact" that the device is refreshing.
ASTERISK-27192
Change-Id: I64c107a10b70db1697d17136051ae6bf22b5314b
res_pjsip and res_pjsip_session had circular references, preventing both
modules from shutting down.
* Move session supplement registration to res_pjsip.
* Use create internal functions for use by pjsip_message_filter.c.
ASTERISK-27306
Change-Id: Ifbd5c19ec848010111afeab2436f9699da06ba6b
Do not manually call sip_endpoint_apply_handler from load_all_endpoints.
This is not necessary and causes memory leaks.
Additionally reinitialize persistent->aors when we reuse a persistent
object with a new endpoint.
ASTERISK-27306
Change-Id: I59bbfc8da8a14d5f4af8c5bb1e71f8592ae823eb
pjsip_distributor leaks references to fake_auth when the default realm
has not changed.
ASTERISK-27306
Change-Id: I3fcf103b3680ad2d1d4610dcd6738eeaebf4d202
When we are loading the calendars, we call libical's
icalcomponent_foreach_recurrence method for each VEVENT component that
we have in our calendar.
That method has no knowledge concerning the existence of the other
VEVENT components and will feed our callback with all ocurrences
matching the requested time span.
The occurrences generated by icalcomponent_foreach_recurrence while
expanding a recurring VEVENT's RRULE and RDATE properties can be
superceded by an other VEVENT sharing the same UID.
I use an external iterator (in libical terminology) to avoid messing
with the internal ones from the calling function, and search for
VEVENTS which could supersede the current occurrence.
The event which can invalidate this occurence needs to have:
- the same UID as our recurrent component (comp)
- a RECURRENCE-ID property, which represents the start time of this
occurrence
If one component is found, just clean and return.
ASTERISK-27296 #close
Reported by: Benoît Dereck-Tricot
Change-Id: I8587ae3eaa765af7cb21eda3b6bf84e8a1c87af8
Currently privacy requests are only granted if the Privacy header
value is exactly "id" (defined in RFC 3325). It ignores any other
possible value (or a combination there of). This patch reverses the
logic from testing for "id" to grant privacy, to testing for "none" and
granting privacy for any other value. "none" must not be used in
combination with any other value (RFC 3323 section 4.2).
ASTERISK-27284 #close
Change-Id: If438a21f31a962da32d7a33ff33bdeb1e776fe56
The "res_pjsip: Filter out non SIP(S) requests" commit moved the
filtering of messages to pjproject's PJSIP_MOD_PRIORITY_TRANSPORT_LAYER
in order to filter out incoming bad uri schemes as early as possible.
Since the change affected outgoing messages as well and the TRANSPORT
layer is the last to be run on outgoing messages, we were overwriting
the setting of external_signaling_address (which is set earlier by
res_pjsip_nat) with an internal address.
* pjsip_message_filter now registers itself as a pjproject module
twice. Once in the TSX layer for the outgoing messages (as it was
originally), then a second time in the TRANSPORT layer for the
incoming messages to catch the invalid uri schemes.
ASTERISK-27295
Reported by: Sean Bright
Change-Id: I2c90190c43370f8a9d1c4693a19fd65840689c8c
The bridge_p2p_rtp_write() has potential reentrancy problems.
* Accessing the bridged RTP members must be done with the instance1 lock
held. The DTMF and asymmetric codec checks must be split to be done with
the correct RTP instance struct locked. i.e., They must be done when
working on the appropriate side of the point to point bridge.
* Forcing the RTP mark bit was referencing the wrong side of the point to
point bridge. The set mark bit is used everywhere else to set the mark
bit when sending not receiving.
The patches for ASTERISK_26745 and ASTERISK_27158 did not take into
account that not everything carried by RTP uses a codec. The telephony
DTMF events are not exchanged with a codec. As a result when
RFC2833/RFC4733 sent digits you would crash if "core set debug 1" is
enabled, the DTMF digits would always get passed to the core even though
the local native RTP bridge is active, and the DTMF digits would go out
using the wrong SSRC id.
* Add protection for non-format payload types like DTMF when updating the
lastrxformat and lasttxformat. Also protect against non-format payload
types when checking for asymmetric codecs.
ASTERISK-27292
Change-Id: I6344ab7de21e26f84503c4d1fca1a41579364186
In PostgreSQL 9.1 the backslash are string literals and not the escape
of characters.
In previous issue ASTERISK_26057 was fixed the use of escape LIKE but the
support for old version of Postgresql than 9.1 was dropped. The sentence
before make was "ESCAPE '\'" but in version before than 9.1 need it to be
as follow "ESCAPE '\\'".
ASTERISK-27283
Change-Id: I96d9ee1ed7693ab17503cb36a9cd72847165f949
pubsub_on_rx_notify_request wasn't checking for a null
Content-Type header before checking that it was
application/simple-message-summary.
ASTERISK-27279
Reported by: Ross Beer
Change-Id: Iec2a6c4d2e74af37ff779ecc9fd35644c5c4ea52
Previously, sRTP authentication failures were reported on log level WARNING.
When such failures happen, each RT(C)P packet is affected, spamming the log.
Now, those failures are reported at log level VERBOSE 2. Furthermore, the
amount is further reduced (previously all two seconds, now all three seconds).
Additionally, the new log entry informs whether media (RTP) or statistics (RTCP)
are affected.
ASTERISK-16898 #close
Change-Id: I6c98d46b711f56e08655abeb01c951ab8e8d7fa0
Validate RTCP packets before processing them.
* Validate that the received packet is of a minimum length and apply the
RFC3550 RTCP packet validation checks.
* Fixed potentially reading garbage beyond the received RTCP record data.
* Fixed rtp->themssrc only being set once when the remote could change
the SSRC. We would effectively stop handling the RTCP statistic records.
* Fixed rtp->themssrc to not treat a zero value as special by adding
rtp->themssrc_valid to indicate if rtp->themssrc is available.
ASTERISK-27274
Make strict RTP learning more flexible.
Direct media can cause strict RTP to attempt to learn a remote address
again before it has had a chance to learn the remote address the first
time. Because of the rapid relearn requests, strict RTP could latch onto
the first remote address and fail to latch onto the direct media remote
address. As a result, you have one way audio until the call is placed on
and off hold.
The new algorithm learns remote addresses for a set time (1.5 seconds)
before locking the remote address. In addition, we must see a configured
number of remote packets from the same address in a row before switching.
* Fixed strict RTP learning from always accepting the first new address
packet as the new stream.
* Fixed strict RTP to initialize the expected sequence number with the
last received sequence number instead of the last transmitted sequence
number.
* Fixed the predicted next sequence number calculation in
rtp_learning_rtp_seq_update() to handle overflow.
ASTERISK-27252
Change-Id: Ia2d3aa6e0f22906c25971e74f10027d96525f31c
This changes the behavior of res_calendar to drop all existing calendars
and re-create them whenever a reload is done. The Calendar API provides
no way for configuration information to be pushed down to calendar
'techs' so updated settings would not take affect until a module
unload/load was done or Asterisk was restarted.
Asterisk 15+ already has a configuration option 'fetch_again_at_reload'
that performs a similar function.
Also fix a tiny memory leak in res_calendar_caldav while we're at it.
ASTERISK-25524 #close
Reported by: Jesper
Change-Id: Ib0f8057642e9d471960f1a79fd42e5a3ce587d3b
Incoming requests with non sip(s) URIs in the Request, To, From
or Contact URIs are now rejected with
PJSIP_SC_UNSUPPORTED_URI_SCHEME (416). This is performed in
pjsip_message_filter (formerly pjsip_message_ip_updater) and is
done at pjproject's "TRANSPORT" layer before a request can even
reach the distributor.
URIs read by res_pjsip_outbound_publish from pjsip.conf are now
also checked for both length and sip(s) scheme. Those URIs read
by outbound registration and aor were already being checked for
scheme but their error messages needed to be updated to include
scheme failure as well as length failure.
Change-Id: Ibb2f9f1d2dc7549da562af4cbd9156c44ffdd460
* The way that we were looking at XML elements for CalDAV was extremely
fragile, so use SAX2 for increased robustness.
* Don't complain about a 'channel' not be specified if autoreminder is
not set. Assume that if 'channel' is not set, we don't want to be
notified.
* Fix some truncated CLI output in 'calendar show calendar' and make the
'Autoreminder' description a bit more clear
ASTERISK-24588 #close
Reported by: Stefan Gofferje
ASTERISK-25523 #close
Reported by: Jesper
Change-Id: I200d11afca6a47e7d97888f286977e2e69874b2c
A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to
receive unsolicited MWI NOTIFY requests and make them available to
other modules via the stasis message bus.
res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request"
that parses a simple-message-summary body and, if
endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state
with the voice-message counts from the message.
Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c
