Core bridging and, more specifically, bridge_softmix have been
enhanced to relay received frames of type TEXT or TEXT_DATA to all
participants in a softmix bridge. res_pjsip_messaging and
chan_pjsip have been enhanced to take advantage of this so when
res_pjsip_messaging receives an in-dialog MESSAGE message from a
user in a conference call, it's relayed to all other participants
in the call.
res_pjsip_messaging already queues TEXT frames to the channel when
it receives an in-dialog MESSAGE from an endpoint and chan_pjsip
will send an MESSAGE when it gets a TEXT frame. On a normal
point-to-point call, the frames are forwarded between the two
correctly. bridge_softmix was not though so messages weren't
getting forwarded to conference bridge participants. Even if they
were, the bridging code had no way to tell the participants who
sent the message so it would look like it came from the bridge
itself.
* The TEXT frame type doesn't allow storage of any meta data, such
as sender, on the frame so a new TEXT_DATA frame type was added that
uses the new ast_msg_data structure as its payload. A channel
driver can queue a frame of that type when it receives a message
from outside. A channel driver can use it for sending messages
by implementing the new send_text_data channel tech callback and
setting the new AST_CHAN_TP_SEND_TEXT_DATA flag in its tech
properties. If set, the bridging/channel core will use it instead
of the original send_text callback and it will get the ast_msg_data
structure. Channel drivers aren't required to implement this. Even
if a TEXT_DATA enabled driver uses it for incoming messages, an
outgoing channel driver that doesn't will still have it's send_text
callback called with only the message text just as before.
* res_pjsip_messaging now creates a TEXT_DATA frame for incoming
in-dialog messages and sets the "from" to the display name in the
"From" header, or if that's empty, the caller id name from the
channel. This allows the chat client user to set a friendly name
for the chat.
* bridge_softmix now forwards TEXT and TEXT_DATA frames to all
participants (except the sender).
* A new function "ast_sendtext_data" was added to channel which
takes an ast_msg_data structure and calls a channel's
send_text_data callback, or if that's not defined, the original
send_text callback.
* bridge_channel now calls ast_sendtext_data for TEXT_DATA frame
types and ast_sendtext for TEXT frame types.
* chan_pjsip now uses the "from" name in the ast_msg_data structure
(if it exists) to set the "From" header display name on outgoing text
messages.
Change-Id: Idacf5900bfd5f22ab8cd235aa56dfad090d18489
(cherry picked from commit be7d4faed5)
Similar to pjproject's PJ_ASSERT_RETURN macro, this one will do the
following...
If the assert passes... NoOp
If the assert fails and AST_DEVMODE is defined, execute ast_assert()
then, if DO_CRASH isn't set, return from the calling function with
the supplied value.
If the assert fails and AST_DEVMODE is not defined, return from the
calling function with the supplied value.
The macro will execute a return without a value if one isn't suppled.
Change-Id: I0003844affeab550d5ff5bca7aa7cf8a559b873e
When a scheduled task is created you can pass in the
AST_SIP_SCHED_TASK_TRACK flag. This new flag causes scheduling events to
be logged.
Change-Id: I91967eb3d5a220915ce86881a28af772f9a7f56b
ast_sip_push_task_synchronous() did not necessarily execute the passed in
task under the specified serializer. If the current thread is any
registered pjsip thread then it would execute the task immediately instead
of under the specified serializer. Reentrancy issues could result if the
task does not execute with the right serializer.
The original reason ast_sip_push_task_synchronous() checked to see if the
current thread was a registered pjsip thread was because of a deadlock
with masquerades and the channel technology's fixup callback
(ASTERISK_22936). A subsequent masquerade deadlock fix (ASTERISK_24356)
involving call pickups avoided the original deadlock situation entirely.
The PJSIP channel technology's fixup callback no longer needed to call
ast_sip_push_task_synchronous().
However, there are a few places where this unexpected behavior is still
required to avoid deadlocks. The pjsip monitor thread executes callbacks
that do calls to ast_sip_push_task_synchronous() that would deadlock if
the task were actually pushed to the specified serializer. I ran into one
dealing with the pubsub subscriptions where an ao2 destructor called
ast_sip_push_task_synchronous().
* Split ast_sip_push_task_synchronous() into
ast_sip_push_task_wait_servant() and ast_sip_push_task_wait_serializer().
ast_sip_push_task_wait_servant() has the old behavior of
ast_sip_push_task_synchronous(). ast_sip_push_task_wait_serializer() has
the new behavior where the task is always executed by the specified
serializer or a picked serializer if one is not passed in. Both functions
behave the same if the current thread is not a SIP servant.
* Redirected ast_sip_push_task_synchronous() to
ast_sip_push_task_wait_servant() to preserve API for released branches.
ASTERISK_26806
Change-Id: Id040fa42c0e5972f4c8deef380921461d213b9f3
* Fix the periodic interval wander because it may take significant time
between the sched thread queueing the task in the serializer and the
serializer actually executing the task. The time it takes to actually
execute the task was already taken into account.
* Pass a schtd ref to the serializer when we queue a scheduled task on
the serializer. We don't want it going away on us while it is in the
serializer queue.
* Skip the scheduled task if the task was canceled between queueing the
task to the serializer and the serializer actually executing the task.
* Reorder struct ast_sip_sched_task to avoid unnecessary padding. Removed
task_id and added next_periodic.
* Hold a ref to the passed in serializer so the serializer cannot go away
on the scheduled task.
ASTERISK_26806
Change-Id: I6c8046b75f6953792c8c30e55b836a4291143f24
* Removed several invalid uses of OBJ_NOLOCK. These uses resulted in the
'tasks' container being accessed without a lock in a multi-threaded
environment. A recipe for crashes.
* Removed needlessly obtaining schtd object references. If the caller
providing you a pointer to an object doesn't have a valid reference then
you cannot safely get one from it.
* Getting a ref to 'tasks' when you aren't copying the pointer into
another location is useless. The 'tasks' container pointer is global.
* Removed many unnecessary uses of RAII_VAR.
* Make ast_sip_schedule_task() name parameter const.
ASTERISK_26806
Change-Id: I5c62488e651314e2a1dbc01f5b078a15512d73db
There is a problem when an INVITE-with-Replaces transfer targets a channel
in a ConfBridge. The transfer will unconditionally swap out the
ConfBridge channel. Unfortunately, the ConfBridge state will not be aware
of this change. Unexpected behavior will happen as a result since
ConfBridge channels currently can only be replaced by a masquerade and not
normal bridge channel moves.
* We just need to pretend that the channel isn't in a bridge (like other
transfer methods already do) so the transfer channel will masquerade into
the ConfBridge channel.
Change-Id: I209beb0e748fa4f4b92a576f36afa8f495ba4c82
Radcli is yet another RADIUS client library, generally compatible with
freeradius and radiusclient-ng.
This commit adds autoconf option for detecting it as well and changes
cdr_radius and cel_radius to use its header file in that case.
ASTERISK-26540
Reported by: Tzafrir Cohen
Change-Id: Icc056d476b7acf481309219e9abdca416866c6ec
This creates a separate source to 'own' symbols related to options.h and
paths.h. This significantly reduces the number of exports created by
main/asterisk.o. This change is required to eventually be able to
link unmodified Asterisk sources to utilities and/or stand-alone tests.
ASTERISK~26245
Change-Id: I5cf184f4757f9363b80c9e678bdc35c477122380
* dahdi_chan_name
* dahdi_chan_name_len
* dahdi_chan_mode
* __manager_event
* dialed_interface_info
Added comment about __progname and environ being needed for FreeBSD to
prevent accidental removal in the future.
Change-Id: I3ae026bc541cd9cb572be2ffa95fc359547642b5
If the two formats on a channel are equal, we don't transcode and since
the generic plc needs slin to work, it doesn't get invoked.
* A new configuration option "genericplc_on_equal_codecs" was added
to the "plc" section of codecs.conf to allow generic packet loss
concealment even if no transcoding was originally needed.
Transcoding via SLIN is forced in this case.
ASTERISK-27743
Change-Id: I0577026a179dea34232e63123254b4e0508378f4
Asterisk does not need the development package of libltdl, because it does not
use any symbol of -lltdl directly. Instead, it uses the runtime package via the
shared library -lodbc. On the supported platforms, that shared library declares
its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
failed.
ASTERISK-27745
Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba
GCC documentation states that when __attribute__((malloc)) is used it
should not return storage which contains any valid pointers. It
specifically mentions that realloc functions should not have the malloc
attribute, but this also means that complex initializers which could
contain initialized pointers should not use this attribute.
Change-Id: If507f33ffb3ca3b83b702196eb0e8215d27fc7d2
In NetBSD, PortAudio 1 is still the default version. PortAudio 2 can be
installed side by side but gets placed in a 'portaudio2' subdirectory. To
find PortAudio 2 even in a subdirectory, the tool pkg-config is queried via
AST_PKG_CONFIG_CHECK. For those platforms, which do not list PowerAudio 2
via pkg-config, the previous check remains and is executed thereafter.
ASTERISK-27721
Change-Id: I4175500126909ad1b181fff8e11bb4a3a6ae4fa9
The pool cache gets in the way of finding use after free errors of memory
pool contents. Tools like valgrind and MALLOC_DEBUG don't know when a
pool is released because it gets put into the cache instead of being
freed.
* Added the "cache_pools" option to pjproject.conf. Disabling the option
helps track down pool content mismanagement when using valgrind or
MALLOC_DEBUG. The cache gets in the way of determining if the pool
contents are used after free and who freed it.
To disable the pool caching simply disable the cache_pools option in
pjproject.conf and restart Asterisk.
Sample pjproject.conf setting:
[startup]
cache_pools=no
* Made current users of the caching pool factory initialization and
destruction calls call common routines to create and destroy cached pools.
ASTERISK-27704
Change-Id: I64d5befbaeed2532f93aa027a51eb52347d2b828
A few changes were made to AMI:
* Fixed "(null):" header in AMI AsyncAGIEnd event
* A mute header was added to the ConfbridgeJoin AMI event
* ConfbridgeList action's ConfbridgeList events now output all
the standard channel snapshot headers
Change-Id: I94a82a44b02c91becae08d254e9a56abba5697cf
In an earlier release, inbound registrations on a reliable transport
were pruned on Asterisk restart since the TCP connection would have
been torn down and become unusable when Asterisk stopped. This same
process is now also applied to inbound subscriptions.
Also fixed issues in res_pjsip_registrar where it wasn't handling the
monitoring correctly when multiple registrations came in over the same
transport.
To accomplish this, the pjsip_transport_event feature needed to
be refactored to allow multiple monitors (multiple subcriptions or
registrations from the same endpoint) to exist on the same transport.
Since this changed the API, any external modules that may have used the
transport monitor feature (highly unlikey) will need to be changed.
ASTERISK-27612
Reported by: Ross Beer
Change-Id: Iee87cf4eb9b7b2b93d5739a72af52d6ca8fbbe36
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
This addresses all performance issues with 'module load' completion. In
addition to using ast_cli_completion_add we stop using libedit's
filename_completion_function, instead using ast_file_read_dir. This
ensures all results are produced from a single call to opendir.
Change-Id: I8bf51ffaa7ef1606f3bd1b5bb13f1905d72c6134
Because of a copy-and-paste error, the Asterisk project was using __typeof
instead of typeof. It works because typeof, __typeof, and __typeof__ are
supported by GCC, but here the escaped variant was not intended. Therefore,
for consistence, we change this to typeof.
Change-Id: I2a962c3e596e882f691a19345445b14571a5f07c
* Copy more than one character at a time when there is nothing to
substitute.
* Fix off by one error if a '}' or ']' is missing.
* Eliminated the requirement that the "used" parameter had to point to a
variable. The current callers were always declaring a variable to meet
the requirement and discarding the value put into that variable. Now it
can be NULL.
* In ast_str_substitute_variables_full() fixed using the bogus channel to
evaluate a function. We were not using the bogus channel we just created
to help evaluate a subexpression.
Change-Id: Ia83d99f4f16abe47f329eb39b6ff2013ae7c9854
The type=identify endpoint identification method can match by IP address
and by SIP header. However, the SIP header matching has limited
usefulness because you cannot specify the SIP header matching priority
relative to the IP address matching. All the matching happens at the same
priority and the order of evaluating the identify sections is
indeterminate. e.g., If you had two type=identify sections where one
matches by IP address for endpoint alice and the other matches by SIP
header for endpoint bob then you couldn't predict which endpoint is
matched when a request comes in that matches both.
* Extract the SIP header matching criteria into its own "header" endpoint
identification method so the user can specify the relative priority of the
SIP header and the IP address matching criteria in the global
endpoint_identifier_order option. The "ip" endpoint identification method
now only matches by IP address.
ASTERISK-27491
Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
This is needed for future changes which will require being able to
process the load priority out of order.
Change-Id: Ia23421197f09789940510b03ebbbf3bf24d51bea
ACO uses regex in many situations where it is completely unneeded. In
some cases this doubles the total processing performed by
aco_process_config.
* Create ACO_IGNORE category type for use in place of skip_category
regex source string.
* Create additional aco_category_op values to allow specifying category
filter using either a single plain string or a NULL terminated array
of plain strings.
* Create ACO_PREFIX to allow matching option names to case insensitive
prefixes.
Change-Id: I66a920dcd8e2b0301f73f968016440a985e72821
We should not do flood detection on video RTP streams. Video RTP streams
are very bursty by nature. They send out a burst of packets to update the
video frame then wait for the next video frame update. Really only audio
streams can be checked for flooding. The others are either bursty or
don't have a set rate.
* Added code to selectively disable packet flood detection for video RTP
streams.
ASTERISK-27440
Change-Id: I78031491a6e75c2d4b1e9c2462dc498fe9880a70
This patch does three things associated with the initial incoming INVITE
request URI.
1) Add access to the full initial incoming INVITE request URI.
2) We were not setting DNID on incoming PJSIP channels. The DNID is the
user portion of the initial incoming INVITE Request-URI. The value is
accessed by reading CALLERID(dnid).
3) Fix CHANNEL(pjsip,target_uri) documentation.
* The initial incoming INVITE request URI is now available using
CHANNEL(pjsip,request_uri).
* Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the
initial incoming INVITE request URI user portion.
* CHANNEL(pjsip,target_uri) now correctly documents that the target URI is
the contact URI.
* Refactored print_escaped_uri() out of channel_read_pjsip() to handle
pjsip_uri_print() error condition when the buffer is too small.
ASTERISK-27478
Change-Id: I512e60d1f162395c946451becb37af3333337b33
Using the LIKE operator requires a full table scan of 'astdb', whereas a
comparison operation is able to use the primary key index.
This patch adds a new function to the AstDB API for quick prefix matches
and updates res_sorcery_astdb to utilize it. This showed substantial
performance improvement in my test environment.
Related to ASTERISK~26806, but does not completely resolve it.
Change-Id: I7d37f9ba2aea139dabf2ca72d31fbe34bd9b2fa1
There are many places in the code base where we ignore the return value
of fcntl() when getting/setting file descriptior flags. This patch
introduces a convenience function that allows setting or clearing file
descriptor flags and will also log an error on failure for later
analysis.
Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
The SuccessfulAuth using_password field was declared as a pointer to a
uint32_t when the field was later read as a uint32_t value. This resulted
in unnecessary casts and a non-portable field value reinterpret in
main/security_events.c:add_json_object(). i.e., It would work on a 32 bit
architecture but not on a 64 bit big endian architecture.
Change-Id: Ia08bc797613a62f07e5473425f9ccd8d77c80935
