If chan_pjsip receives an RTP packet whose payload differs from the
channel's native format, and asymmetric_rtp_codec is disabled (the
default), Asterisk will switch the channel's native format to match
that of the incoming packet without regard to the negotiated payloads.
We now keep track of the formats that have been negotiated and check
before switching payloads which results in these packets being dropped
instead of causing the session to terminate.
ASTERISK-28139 #close
Reported by: Paul Brooks
Change-Id: Icc3b85cee1772026cee5dc1b68459bf9431c14a3
ast_addressfamily_to_sockaddrize will determine the size that's
required, and ast_sockaddr_from_sockaddr then wraps this new function
and ast_sockaddr_copy_sockaddr to copy arbitrary sockaddr's (without
knowing the address family) into the ast_sockaddr structure.
Change-Id: Iee604e96e9096c79b477d6e5ff310cf0b06dae86
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Some body generators, such as dialog-info+xml, require storing state
information which is then conveyed in the NOTIFY request itself. Up
until now there was no way for such body generators to persist this
information.
Two new API calls have been added to allow body generators to set and
get persisted data. This data is persisted out alongside the normal
persistence information and allows the body generator to restore
state information or to simply use this for normal storage of state.
State is stored in the form of JSON and it is up to the body
generator to interpret this as needed.
The dialog-info+xml body generator has been updated to take advantage
of this to persist the version number.
ASTERISK-27759
Change-Id: I5fda56c624fd13c17b3c48e0319b77079e9e27de
Adds source port matching support when IP matching is used:
[example]
type = identify
match = 1.2.3.4:5060/32, 1.2.3.4:6000/32, asterisk.org:4444
If the IP matches but the source port does not, we reject and search for
alternatives. SRV lookups are still performed if enabled (srv_lookups = yes),
unless the configured FQDN includes a port number in which case just a host
lookup is performed.
ASTERISK-28639 #close
Reported by: Mitch Claborn
Change-Id: I256d5bd5d478b95f526e2f80ace31b690eebba92
When a topic is created for an object, its name is only
<object>:<uniqueid>
For example:
bridge:cb68b3a8-fce7-4738-8a17-d7847562f020
When a topic is added to a pool, its name has the pool's topic
name prepended. For example:
bridge:all/bridge:cb68b3a8-fce7-4738-8a17-d7847562f020
The topic_pool_entry's name however, is only what was passed
in to stasis_topic_pool_get_topic which is
bridge:cb68b3a8-fce7-4738-8a17-d7847562f020
That's actually correct because the entry is qualified by the
pool that's in.
When you're ready to delete the entry from the pool, you retrieve
the tropic name from the object but since it now has the pool's
topic name prepended, it won't be found in the pool container.
Fix:
* Modified stasis_topic_pool_delete_topic() to skip past the
pool topic's name, if it was prepended to the topic name,
before searching the container for a pool entry.
ASTERISK-28633
Reported by: Joeran Vinzens
Change-Id: I4396aa69dd83e4ab84c5b91b39293cfdbcf483e6
Instead of trying to use the defined MySQL client version from the
header use a configure check to determine whether the bool or my_bool
type should be used for defining a boolean.
ASTERISK-28604
Change-Id: Id2225b3785115de074c50c123ff1a68005b4a9c7
ConfBridge has the ability to move between different sample
rates for mixing the conference bridge. Up until now there has
only been the ability to set the conference bridge to mix at
a specific sample rate, or to let it move between sample rates
as necessary. This change adds the ability to configure a
conference bridge with a maximum sample rate so it can move
between sample rates but only up to the configured maximum.
ASTERISK-28658
Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee
A previous patch:
Gerrit Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39
made it so a T.38 Gateway tries to negotiate with both sides by sending T.38
negotiation request to both endpoints supported T.38 versus the previous
behavior of forwarding negotiation to the "other" channel once a preamble
was detected.
This had the unfortunate side effect of breaking some setups. Specifically
ones that set the max datagram option on an endpoint configuration (configured
max datagram was not propagated since Asterisk now initiates negotiations).
This patch adds a configuration option, "negotiate_both", that when enabled
makes it so Asterisk initiates the negotiation requests to both endpoints vs.
the previous behavior of waiting, and forwarding the request.
The default is disabled keeping with the old behavior.
ASTERISK-28660
Change-Id: I5deb875f3485e20bc75119ec743090655d864a1a
Due to use in res_rtp_asterisk there is a need to be able to apply an
ACL without logging any invalid/denies. It's probably sensible to at
least validate the ACL once directly after load and report invalid ACLs.
Change-Id: I256169229d945ca7c1bbf228fc492d91df345843
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
This patch fixes several issues reported by the lgtm code analysis tool:
https://lgtm.com/projects/g/asterisk/asterisk
Not all reported issues were addressed in this patch. This patch mostly fixes
confirmed reported errors, potential problematic code points, and a few other
"low hanging" warnings or recommendations found in core supported modules.
These include, but are not limited to the following:
* innapropriate stack allocation in loops
* buffer overflows
* variable declaration "hiding" another variable declaration
* comparisons results that are always the same
* ambiguously signed bit-field members
* missing header guards
Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25
Both res_pjsip and res_pjsip_mwi made use of serializer pools. However, they
both implemented their own serializer pool functionality that was pretty much
identical in each of the source files. This patch removes the duplicated code,
and uses the new 'ast_serializer_pool' object instead.
Additionally res_pjsip_mwi enables a shutdown group on the pool since if the
timing was right the module could be unloaded while taskprocessor threads still
needed to execute, thus causing a crash.
Change-Id: I959b0805ad024585bbb6276593118be34fbf6e1d
Serializer pools have previously existed in Asterisk. However, for the most
part the code has been duplicated across modules. This patch abstracts the
code into an 'ast_serializer_pool' object. As well the code is now centralized
in serializer.c/h.
In addition serializer pools can now optionally be monitored by a shutdown
group. This will prevent the pool from being destroyed until all serializers
have completed.
Change-Id: Ib1e906144b90ffd4d5ed9826f0b719ca9c6d2971
Add a new dialplan function PJSIP_MOH_PASSTHROUGH that allows
the on-hold behavior to be controlled on a per-call basis
ASTERISK-28542 #close
Change-Id: Iebe905b2ad6dbaa87ab330267147180b05a3c3a8
This change adds an option, moh_passthrough, that when enabled will pass
hold and unhold requests through using a SIP re-invite. When placing on
hold a re-invite with sendonly will be sent and when taking off hold a
re-invite with sendrecv will be sent. This allows remote servers to handle
the musiconhold instead of the local Asterisk instance being responsible.
Review: https://reviewboard.asterisk.org/r/4103/
Change-Id: Ib6294e906e577e1a4245cb1f058d3976ff484c52
When modifying an already defined variable in some channel drivers they
add a new variable with the same name to the list, but that value is
never used, only the first one found.
Introduce ast_variable_list_replace() and use it where appropriate.
ASTERISK-23756 #close
Patches:
setvar-multiplie.patch submitted by Michael Goryainov
Change-Id: Ie1897a96c82b8945e752733612ee963686f32839
There are 4 scenarios to consider when capturing audio from a channel
with an audiohook:
1. There is no rx and no tx audio, so return nothing.
2. There is rx but no tx audio, so return rx.
3. There is tx but no rx audio, so return tx.
4. There is rx and tx audio, so mix them and return.
The file passed as the primary argument to MixMonitor will be written to
in scenarios 2, 3, and 4. However, if you pass the r() and t() options
to MixMonitor, a frame will only be written to the r() file if there was
rx audio and a frame will only be written to the t() file if there was
tx audio.
If you subsequently take the r() and t() files and try to mix them, the
sides of the conversation will 'drift' and be non-representative of the
user experience.
This patch adds a new 'S' option to MixMonitor that injects a frame of
silence on either the r() side or the t() side of the channel so that
when later mixed, there is no such drift.
Change-Id: Ibf5ed73a811087727bd561a89a59f4447b4ee20e
When updating times on CDR or CEL records using the time at which
it is done can result in times being incorrect if the system is
heavily loaded and stasis message processing is delayed.
This change instead makes it so CDR and CEL use the time at which
the stasis messages that drive the systems are created. This allows
them to be backed up while still producing correct records.
ASTERISK-28498
Change-Id: I6829227e67aefa318efe5e183a94d4a1b4e8500a
When fixing ASTERISK~24212, a change was done so a scheduled callback could not
be removed while it was running. The caller of ast_sched_del would have to wait.
However, when the caller of ast_sched_del is the callback itself (however wrong
this might be), this new check would cause a deadlock: it would wait forever
for itself.
This changeset introduces an additional check: if ast_sched_del is called
by the callback itself, it is immediately rejected (along with an ERROR log and
a backtrace). Additionally, the AST_SCHED_DEL_UNREF macro is adjusted so the
after-ast_sched_del-refcall function is only run if ast_sched_del returned
success.
This should fix the following spurious race condition found in chan_sip:
- thread 1: schedule sip_poke_peer_now (using AST_SCHED_REPLACE)
- thread 2: run sip_poke_peer_now
- thread 2: blank out sched-ID (too soon!)
- thread 1: set sched-ID (too late!)
- thread 2: try to delete the currently running sched-ID
After this fix, an ERROR would be logged, but no deadlocks (in do_monitor) nor
excess calls to sip_unref_peer(peer) (causing double frees of rtp_instances and
other madness) should occur.
(Thanks Richard Mudgett for reviewing/improving this "scary" change.)
Note that this change does not fix the observed race condition: unlocked
access to peer->pokeexpire (and potentially other scheduled items in chan_sip),
causing AST_SCHED_DEL_UNREF to look at a changing id. But it will make the
deadlock go away. And in the observed case, it will not have adverse affects
(like memory leaks) because the scheduled item is removed through a different
path.
ASTERISK-28282
Change-Id: Ic26777fa0732725e6ca7010df17af77a012aa856
When a channel already in a conference bridge is attended transfered
to another extension, or when an existing call is attended
transferred into a conference bridge, we now generate ConfbridgeJoin
and ConfbridgeLeave events for the entering and departing channels.
Change-Id: Id7709cfbceb26fbcb828b2d0d2a6b2fbeaf028e1
This change adds support for larger TLS certificates by allowing
OpenSSL to fragment the DTLS packets according to the configured
MTU. By default this is set to 1200.
This is accomplished by implementing our own BIO method that
supports MTU querying. The configured MTU is returned to OpenSSL
which fragments the packet accordingly. When a packet is to be
sent it is done directly out the RTP instance.
ASTERISK-28018
Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06
Added RINGTIME, RINGTIME_MS, PROGRESSTIME, PROGRESSTIME_MS variables filled
at the earliest received PROGRESS or RINGING.
Added millisecond versions of DIALEDTIME and ANSWEREDTIME.
Added millisecond versions of ast_channel_get_up_time and
ast_channel_get_duration in channel.c.
ASTERISK-28363
Change-Id: If95f1a7d8c4acbac740037de0c6e3109ff6620b1
There is enough MWI functionality to warrant it having its own 'c' and header
files. This patch moves all current core MWI data structures, and functions
into the following files:
main/mwi.h
main/mwi.c
Note, code was simply moved, and not modified. However, this patch is also in
preparation for core MWI changes, and additions to come.
Change-Id: I9dde8bfae1e7ec254fa63166e090f77e4d3097e0
Added a new PJSIP global setting called norefersub.
Default is true to keep support working as before.
res_pjsip_refer: Configures PJSIP norefersub capability accordingly.
Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.
This is useful for Cisco switches that do not follow RFC4488.
ASTERISK-28375 #close
Reported-by: Dan Cropp
Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9
It was difficult to check the channel's current application and
parameters using ARI for current channels. Added app_name, app_data
items to show the current application information.
ASTERISK-28343
Change-Id: Ia48972b3850e5099deab0faeaaf51223a1f2f38c
Added ARI resource for channel statistics.
GET /ari/channels/{channelId}/rtp_statistics : It returns given
channel's rtp statistics detail.
ASTERISK-28320
Change-Id: I4343eec070438cec13f2a4f22e7fd9e574381376
Since the new names went in, the maximum taskprocessor name is too
short. This patch increases the name field to a length to better
handle the new names.
Change-Id: I32f32d6926f25c8ef5a91303fd2988d2c2858877
Added ability to specifiy a wizard is read-only when applying
it to a specific object type. This allows you to specify
create, update and delete callbacks for the wizard but limit
which object types can use them.
Added the ability to allow an object type to have multiple
wizards of the same type. This is indicated when a wizard
is added to a specific object type.
Added 3 new sorcery wizard functions:
* ast_sorcery_object_type_insert_wizard which does the same thing
as the existing ast_sorcery_insert_wizard_mapping function but
accepts the new read-only and allot-duplicates flags and also
returns the ast_sorcery_wizard structure used and it's internal
data structure. This allows immediate use of the wizard's
callbacks without having to register a "wizard mapped" observer.
* ast_sorcery_object_type_apply_wizard which does the same
thing as the existing ast_sorcery_apply_wizard_mapping function
but has the added capabilities of
ast_sorcery_object_type_insert_wizard.
* ast_sorcery_object_type_remove_wizard which removes a wizard
matching both its name and its original argument string.
* The original logic in __ast_sorcery_insert_wizard_mapping was moved
to __ast_sorcery_object_type_insert_wizard and enhanced for the
new capabilities, then __ast_sorcery_insert_wizard_mapping was
refactored to just call __ast_sorcery_insert_wizard_mapping.
* Added a unit test to test_sorcery.c to test the read-only
capability.
Change-Id: I40f35840252e4313d99e11dbd80e270a3aa10605
This might be useful in situations where you are loading an undetermined number
of items into a vector and don't want to keep (potentially) 2x the necessary
memory around indefinitely.
Change-Id: I9711daa0fe01783fc6f04c5710eba84f2676d7b9
Increasing the non-breaking AMI and ARI version numbers due to changes and
additions in those API's. Note, some changes may be forthcoming (will be added
between now and the next release of Asterisk), thus not listed here. As well
a few changes listed below may have been released in a previous release of
Asterisk, but the API version numbers were not increased at that time, so
including here.
AMI:
* res_pjsip: option for ContactStatus event updates - 4a8564c
ARI:
* bridging: Add creation timestamps - 4dd4dbd
* res_stasis: Add ability to switch applications - 65170ba
* ARI event type filtering - da93d17
* Added ARI resource /ari/asterisk/ping - 67d587f
ASTERISK-28314
Change-Id: I96951b19c27c196e410b09fe82b00c8ca328cccc
Topic names now follow: <subsystem>:<functionality>[/<object>]
This ensures that they are all unique, and also provides better
insight in to what each topic is for.
Subscriber ids now also use the main topic name they are
subscribed to and an incrementing integer as their identifier to
make it easier to understand what the subscription is primarily
responsible for.
Both the CLI commands for listing topic and subscription statistics
now sort to make it a bit easier to see what is going on.
Subscriptions will now show all topics that they are receiving messages
from, not just the main topic they were subscribed to.
ASTERISK-28335
Change-Id: I484e971a38c3640f2bd156282e532eed84bf220d
chan_sip will always ignore 183 responses that do not contain SDP
however, chan_pjsip will currently always translate it into a
183 with SDP. This new flag allows chan_pjsip to have the same
behavior as chan_sip.
ASTERISK-28322 #close
Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a
Added the ability to move between Stasis applications within Stasis.
This can be done by calling 'move' in an application, providing (at
minimum) the channel's id and the application to switch to. If the
application is not registered or active, nothing will happen and the
channel will remain in the current application, and an event will be
triggered to let the application know that the move failed. The event
name is "ApplicationMoveFailed", and provides the "destination" that the
channel was attempting to move to, as well as the usual channel
information. Optionally, a list of arguments can be passed to the
function call for the receiving application. A full example of a 'move'
call would look like this:
client.channels.move(channelId, app, appArgs)
The control object used to control the channel in Stasis can now switch
which application it belongs to, rather than belonging to one Stasis
application for its lifetime. This allows us to use the same control
object instead of having to tear down the current one and create
another.
ASTERISK-28267 #close
Change-Id: I43d12b10045a98a8d42541889b85695be26f288a
