When the caller ID is restricted, the expected behavior is for the caller id to be blank. In chan_dahdi, the national prefix is placed onto the callers number even if its restricted (empty) causing the caller id to be the national prefix rather than blank.
(closes issue #13207)
Reported by: shawkris
Patches:
national_prefix.diff uploaded by dvossel (license 671)
Review: http://reviewboard.digium.com/r/220/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@188646 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Don't offer AST_FORMAT_SLINEAR on DAHDI/Zaptel channels... while it could provide a slight performance benefit, the translation core in Asterisk has some flaws when a channel driver offers multiple raw formats. this fix is much simpler than fixing the translation core to solve that issue (although that will be done later).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@186458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added doxygen comments to the major dahdi structures.
* Fixed PRI using an incorrect string value if the extension
delimiter is not present in the Dial() function.
* Fixed some uninitialized string variables on FXS ports.
configs/chan_dahdi.conf.sample
* Updated some documentation.
These changes are already in trunk -r172400
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@172962 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It has been discovered that if a channel is locked prior
to a call to ast_autoservice_stop, then it is likely that
a deadlock will occur. The reason is that the call to
ast_autoservice_stop has a check built into it to be sure
that the thread running autoservice is not currently trying
to manipulate the channel we are about to pull out of
autoservice.
The autoservice thread, however, cannot advance beyond where
it currently is, though, because it is trying to acquire
the lock of the channel for which autoservice is attempting
to be stopped.
The gist of all this is that a channel MUST NOT be locked
when attempting to stop autoservice on the channel.
In this particular case, the channel was locked by a call
to ast_read. A call to ast_exists_extension led to autoservice
being started and stopped due to the existence of dialplan
switches.
It may be that there are future commits which handle the same
symptoms but in a different location, but based on my looks through
the code, it is very rare to see a construct such as this one.
(closes issue #14057)
Reported by: rtrauntvein
Patches:
14057v3.patch uploaded by putnopvut (license 60)
Tested by: rtrauntvein
Review: http://reviewboard.digium.com/r/107/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@166380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: tzafrir
Replace a bunch of if defined checks for Zaptel/DAHDI through several new defines in dahdi_compat.h. This removes a lot of code duplication. Example from bug:
#ifdef HAVE_ZAPTEL
fd = open("/dev/zap/pseudo", O_RDWR);
#else
fd = open("/dev/dahdi/pseudo", O_RDWR);
#endif
is replaced with:
fd = open(DAHDI_FILE_PSEUDO, O_RDRW);
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@165991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: tzafrir
When compiling against Zaptel dahdi_compat will now only define all the DAHDI defines if the Zaptel define is present. Also, there is no such thing as DAHDI_PRI.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@158629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Don't always define HAVE_ZAPTEL_CHANALARMS (since we check if it's defined..)
Minor cleanup to make things clear.
(closes issue #13726)
Reported by: tzafrir
Patches:
dahdi_def.diff uploaded by tzafrir (license 46)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@150557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: tzafrir
Patches:
dahdi_close.diff uploaded by tzafrir (license 46)
Tested by: tzafrir, jpeeler
This patch fixes closing open file descriptors in the case of an error.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@140056 65c4cc65-6c06-0410-ace0-fbb531ad65f3
buffers=<num of buffers>,<policy>
Where the number of buffers is some non-negative integer and the policy is either "full", "half", or "immediate".
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@138938 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the existing channel name without the "Zap/" or "DAHDI/" prefix, since our
test string is also without that prefix.
(closes issue #13027)
Reported by: dferrer
Patches:
chan_zap-1.4.21.1_fix2.patch uploaded by dferrer (license 525)
(Slightly modified by me, to compensate for both names)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@137847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_chanspy should be set at load time, not at compile
time, since dahdi_chan_name is determined at load time.
Also changed the next_unique_id_to_use to have the
static qualifier.
Also added the dahdi_chan_name_len variable so that
strlen(dahdi_chan_name) isn't necessary. Thanks to
seanbright for the suggestion.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@133169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
variable to the block where it is used. This allows one
less #ifdef HAVE_PRI to clutter things up.
Thanks to Tzafrir for pointing this out on #asterisk-dev
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@133038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
