This patch calculates the timestamp for outbound RTP when we don't have timing
information. This uses the same approach in res_rtp_asterisk. Thanks to both
Pietro and Tzafrir for providing patches.
(closes issue ASTERISK-19883)
Reported by: Giacomo Trovato
Tested by: Pietro Bertera, Tzafrir Cohen
patches:
rtp-timestamp-1.8.patch uploaded by tzafrir (License 5035)
rtp-timestamp.patch uploaded by pbertera (License 5943)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@385636 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, a read error in snd_pcm_readi would still be treated as a
nominal result when constructing a voice frame from the expected data. Since
the value returned is negative, as opposed to the number of samples read,
this could result in a crash. With this patch, we now return a null frame
when a read error is detected.
Note that the patch on ASTERISK-21329 was modified slightly for this commit,
in that we bail immediately on detecting the read error, rather than bypassing
the construction of the voice frame.
(closes issue ASTERISK-21329)
Reported by: Keiichiro Kawasaki
patches:
chan_alsa.diff uploaded by kawasaki (License 6489)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@385633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When app_queue is unloaded, some manager commands are not being unregistered
which result in a segfault. This patch corrects this.
(closes issue ASTERISK-21397)
Reported by: Peter Katzmann, Corey Farrell
Tested by: Corey Farrell
Patches:
asterisk-21397-missing-unreg-manager-cmd_1.8.diff
Michael L. Young (license 5026)
asterisk-21397-missing-unreg-manager-cmd_11.diff
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2444/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@385593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original report was that app_voicemail would crash. This was caused by
ast_config_load() returning CONFIG_STATUS_FILEINVALID but no checks being
performed for that return status. After adding the initial patch to fix this
issue, Jaco Kroon (jkroon) added some fixes to memory leaks he had discovered.
During review, Walter Doekes (wdoekes) suggested adding a helper function in
order to determine if we had a valid configuration or not.
This patch does the following:
* Creates a helper function to check if the configuration is valid
* Adds calls to the new helper function where appropiate
* Fixes memory leaks where the code returned without running
ast_config_destroy() on the configuration that was loaded
(closes issue ASTERISK-21302)
Reported by: Jaco Kroon
Tested by: Jaco Kroon, Michael L. Young
Patches:
asterisk-11.3.0-app_voicemail-ast_config-fixes.patch
Jaco Kroon (license 5671)
asterisk-21302-valid_cfg_and_mem_leaks_v3-1.8.diff
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2443/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@385551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On startup, it's possible for a frame to arrive before the processing threads were ready.
In iax2_process_thread() the first pass through falls into ast_cond_wait, should a frame arrive
before we are at ast_cond_wait, the signal will be ignored.
The result iax2_process_thread stays at ast_cond_wait forever, with deferred frames being queued.
Fix: When creating initial idle iax2_process_threads, wait for init_cond to be signalled
after each thread is started.
(issue ASTERISK-18827)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2427/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@385402 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When MALLOC_DEBUG is enabled with res_config_ldap, issues (munmap_chunk:
invalid pointer errors) can occur as the memory is being allocated with
Asterisk's wrappers around malloc/calloc/free/strdup, as opposed to the
LDAP library's wrappers.
This patch uses the LDAP library's wrappers where appropriate, so that
compiling with MALLOC_DEBUG doesn't cause more problems than it solves.
Note that the patch listed below was modified slightly for this commit
to account for some additional memory allocation/deallocations.
(closes issue ASTERISK-17386)
Reported by: John Covert
Tested by: Andrew Latham
patches:
issue18789-1.8-r316873.patch uploaded by seanbright (License 5060)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@385190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a BYE request is processed in chan_sip, the current SIP dialog is detached
from its associated Asterisk channel structure. The tech_pvt pointer in the
channel object is set to NULL, and the dialog persists for an RFC mandated
period of time to handle re-transmits.
While this process occurs, the channel is locked (which is good).
Unfortunately, operations that are initiated externally have no way of knowing
that the channel they've just obtained (which is still valid) and that they are
attempting to lock is about to have its tech_pvt pointer removed. By the time
they obtain the channel lock and call the channel technology callback, the
tech_pvt is NULL.
This patch adds a few checks to some channel callbacks that make sure the
tech_pvt isn't NULL before using it. Prime offenders were the DTMF digit
callbacks, which would crash if AMI initiated a DTMF on the channel at the
same time as a BYE was received from the UA. This patch also adds checks on
sip_transfer (as AMI can also cause a callback into this function), as well
as sip_indicate (as lots of things can queue an indication onto a channel).
Review: https://reviewboard.asterisk.org/r/2434/
(closes issue ASTERISK-20225)
Reported by: Jeff Hoppe
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@385170 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added a line showing the mapping of "mysql" to res_config_mysql available in add-ons. We used "mysql" as an example driver key in the sample, but didn't show what module it mapped too. Also added a subtitle above the list of keys for driver backends.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@385047 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The initial report was that the "nat" setting in the [general] section was not
having any effect in overriding the default setting. Upon confirming that this
was happening and looking into what was causing this, it was discovered that
other default settings would not be overriden as well.
This patch works similar to what occurs in build_peer(). We create a temporary
ast_flags structure and using a mask, we override the default settings with
whatever is set in the [general] section.
In the bug report, the reporter who helped to test this patch noted that the
directmedia settings were being overriden properly as well as the nat settings.
(closes issue ASTERISK-21225)
Reported by: Alexandre Vezina
Tested by: Alexandre Vezina, Michael L. Young
Patches:
asterisk-21225-handle-options-default-prob_1.8_v4.diff.diff
Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2386/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@385008 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-20904, the focus was around the changes to NAT that took place in
Asterisk 11. Since the report stated that 1.8 was fine, we didn't take a look
at 1.8 at the time.
While working on ASTERISK-21225, I could see that 1.8 would benefit from having
some of those changes applied to it.
This patch does the following:
* The important part of this patch is that it sets the peer's flags earlier in
build_peer so that the code properly uses the peer's flags based on the peer's
configuration.
* constify req parameter in check_via()
* update realtime schemas under the contrib directory to handle properly the NAT
settings available in 1.8 as well as to handle the changes made in 11 to make
upgrading easier when installing newer versions of Asterisk
(closes issue ASTERISK-21243)
Reported by: Michael L. Young
Patches:
asterisk-20904-changes_for_1.8.diff Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2422/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@384779 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new inband_on_proceeding option causes Asterisk to assume inband audio
may be present when a PROCEEDING message is received.
Q.931 Section 5.1.2 says the network cannot assume that the CPE side has
attached to the B channel at this time without explicitly sending the
progress indicator ie informing the CPE side to attach to the B channel
for audio. However, some non-compliant ISDN switches send a PROCEEDING
without the progress indicator ie indicating inband audio is available and
assume that the CPE device has connected the media path for listening to
ringback and other messages.
ASTERISK-17834 which causes this issue was dealing with a non-compliant
network switch.
(closes issue ASTERISK-21151)
Reported by: Gianluca Merlo
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@384685 65c4cc65-6c06-0410-ace0-fbb531ad65f3
func_version.so was being rebuilt every time, because build.h was
changing every build, because of the cleantest dependency that was
added in r384410 to fix parallel make bugs.
Now build.h will only be created if it does not exist, which was the
original behavior of the Makefile.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@384544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally, make -j would fail due to missing includes, or other
unusual errors.
This was due to the 'cleantest' target, which was designed to force a
make clean when some change in the code would cause the typical
depedency checking to fail. Several targets in the main Makefile did
not depend upon cleantest, hence would run in parallel to it. By
adding the dependency, make -j runs happily now.
Review: https://reviewboard.asterisk.org/r/2418/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@384410 65c4cc65-6c06-0410-ace0-fbb531ad65f3
At least one call to run_externnotify provides a NULL context parameter and
because the snprintf statement doesn't account for a NULL context parameter,
it simply writes '(null)' to the arguments string instead. This patch makes
it write two quotes back to back for that argument instead in the event of
a NULL context.
(closes issue ASTERISK-18207)
Reported by: Barry L. Kline
Patches:
modified from patch-20130306 uploaded by Karsten Wemheuer (License 5930)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@384325 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While looking at the security vulnerability in ASTERISK-20967, Walter noticed
a file descriptor leak and some other issues in off nominal code paths. This
patch corrects them.
Note that this patch is not related to the vulnerability in ASTERISK-20967,
but the patch was placed on that issue.
(closes issue ASTERISK-20967)
Reported by: wdoekes
patches:
issueA20967_file_leak_and_unused_wkspace.patch uploaded by wdoekes (License 5674)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@384118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When res_rtp_asterisk.c was altered to avoid attempting to apply
unprotect algorithms to non-audio RTP packets, the test used was
incorrect. This caused the audio packets to not be decrypted and
resulted in loud white noise on the other endpoint (or both endpoints
depending on the call legs involved). The test now properly checks the
version field in the RTP header to ensure that RTP and RTCP are
decrypted while other types of packets are not.
(closes issue ASTERISK-21323)
Reported by: andrea
Tested by: Kinsey Moore, andrea, John Bigelow
Patches:
whitenoise_fix.diff uploaded by Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@384048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When authenticating a SIP request with alwaysauthreject enabled, allowguest
disabled, and autocreatepeer disabled, Asterisk discloses whether a user
exists for INVITE, SUBSCRIBE, and REGISTER transactions in multiple ways. The
information is disclosed when:
* A "407 Proxy Authentication Required" response is sent instead of a
"401 Unauthorized" response
* The presence or absence of additional tags occurs at the end of "403
Forbidden" (such as "(Bad Auth)")
* A "401 Unauthorized" response is sent instead of "403 Forbidden" response
after a retransmission
* Retransmission are sent when a matching peer did not exist, but not when a
matching peer did exist.
This patch resolves these various vectors by ensuring that the responses sent
in all scenarios is the same, regardless of the presence of a matching peer.
This issue was reported by Walter Doekes, OSSO B.V. A substantial portion of
the testing and the solution to this problem was done by Walter as well - a
huge thanks to his tireless efforts in finding all the ways in which this
setting didn't work, providing automated tests, and working with Kinsey on
getting this fixed.
(closes issue ASTERISK-21013)
Reported by: wdoekes
Tested by: wdoekes, kmoore
patches:
AST-2013-003-1.8 uploaded by kmoore, wdoekes (License 6273, 5674)
AST-2013-003-10 uploaded by kmoore, wdoekes (License 6273, 5674)
AST-2013-003-11 uploaded by kmoore, wdoekes (License 6273, 5674)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@383981 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST-2012-014, fixed in January of this year, contained a fix for Asterisk's
HTTP server for a remotely-triggered crash. While the fix put in place fixed
the possibility for the crash to be triggered, a denial of service vector still
exists with that solution if an attacker sends one or more HTTP POST requests
with very large Content-Length values. This patch resolves this by capping
the Content-Length at 1024 bytes. Any attempt to send an HTTP POST with
Content-Length greater than this cap will not result in any memory allocation.
The POST will be responded to with an HTTP 413 "Request Entity Too Large"
response.
This issue was reported by Christoph Hebeisen of TELUS Security Labs
(closes issue ASTERISK-20967)
Reported by: Christoph Hebeisen
patches:
AST-2013-002-1.8.diff uploaded by mmichelson (License 5049)
AST-2013-002-10.diff uploaded by mmichelson (License 5049)
AST-2013-002-11.diff uploaded by mmichelson (License 5049)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@383976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r373424, several reentrancy problems in chan_sip were addressed. As a
result, the SIP channel driver is now properly locking the channel driver
private information in certain operations that it wasn't previously. This
exposed two latent problems either in register_verify or by functions called
by register_verify. This includes:
* Holding the private lock while calling sip_send_mwi_to_peer. This can create
a new sip_pvt via sip_alloc, which will obtain the channel container lock.
This is a locking inversion, as any channel related lock must be obtained
prior to obtaining the SIP channel technology private lock.
* Holding the privat elock while calling sip_poke_peer. In the same vein as
sip_send_mwi_to_peer, sip_poke_peer can create a new SIP private, causing
the same locking inversion.
Note that this locking inversion typically occured when CLI commands were run
while a SIP REGISTER request was being processed, as many CLI commands (such
as 'sip show channels', 'core show channels', etc.) have to obtain the channel
container lock.
(issue ASTERISK-21068)
Reported by: Nicolas Bouliane
(issue ASTERISK-20550)
Reported by: David Brillert
(issue ASTERISK-21314)
Reported by: Badalian Vyacheslav
(issue ASTERISK-21296)
Reported by: Gabriel Birke
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@383863 65c4cc65-6c06-0410-ace0-fbb531ad65f3
r375757 attempted to resolve a race condition between multiple submissions of
CDRs while in batch mode from attempting to destroy the scheduled batch
submission by extending the batch CDR lock. Unfortunately, this causes a
deadlock between the pending CDR lock and the batch CDR lock. This patch
resolves the intent of r375757 by simply providing a new lock that protects
the scheduling of the batches. The original batch CDR lock is kept to protect
manipulation of the batch CDR settings, but has been placed such that it
is not held when the pending lock is held.
Thanks to Chase Venters for providing lock analysis on the issue.
(issue ASTERISK-21162)
Reported by: Chase Venters
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@383839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an SLA trunk is ringing (inbound call on the trunk) Asterisk will
make outbound calls to the stations that have that trunk. If more than
one station answers the call at the same time, all channels other than
the first one to answer are left in a bad state. The channel gets
leaked, is not connected to anything, and there's no way to get rid of
it.
We now properly clean up these losing channels by hanging up on them.
Since they lost the race, as we process their answer, there is no
ringing trunk for them to answer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@383835 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CALLEDTON channel variable is set for incoming ISDN calls to the lower
7 bits of the Q.931 type-of-number/numbering-plan octet. The
CALLERID(dnid-num-plan) should have the same value.
(closes issue ASTERISK-21248)
Reported by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@383796 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI, HTTP, and chan_sip all support TLS in some way, but none of them
support all the options that Asterisk's TLS core is capable of
interpreting. This prevents consumers of the TLS/SSL layer from setting
TLS/SSL options that they do not support.
This also gets tlsverifyclient closer to a working state by requesting
the client certificate when tlsverifyclient is set. Currently, there is
no consumer of main/tcptls.c in Asterisk that supports this feature and
so it can not be properly tested.
Review: https://reviewboard.asterisk.org/r/2370/
Reported-by: John Bigelow
Patch-by: Kinsey Moore
(closes issue AST-1093)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@383165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a session timer expires during a dialog that has re-negotiated to T.38
and Asterisk is the refresher, Asterisk will send a re-INVITE with an SDP
containing audio media only. This causes some hilarity with the poor fax
session under weigh.
This patch corrects that by sending T.38 parameters if we are in the middle of
a T.38 session.
(closes issue ASTERISK-21232)
Reported by: Nitesh Bansal
patches:
dont-send-audio-reinvite-for-sess-timer-in-t38-call.patch uploaded by nbansal (License 6418)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@383124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In certain situations, call files are not processed when using KQueue with
pbx_spool. Asterisk was sending an invalid timeout value when the spool
directory is empty, causing the call to kevent to error immediately. This
can create a tight loop, increasing the CPU load on the system.
(closes issue ASTERISK-21176)
Reported by: Carlton O'Riley
patches:
kqueue_osx.patch uploaded by coriley (License 6473)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@383120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When retrieving the parking lots from a MySQL database table, the current order
is "filename, cat_metric desc, var_metric asc, category". If there are multiple
parking lots with the same cat_metric but different categories, everything is
being sorted on cat_metric first resulting in errors when loading the parking
lots.
This patch fixes the problem by sorting on the category field first, then the
cat_metric field.
(closes issue ASTERISK-21035)
Reported by: Alex Epshteyn
Patches:
asterisk-21035-orderby.diff Michael L. Young (license 5026)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@382942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit updates some fields in the contributed realtime schema files to
handle IPv6 addresses.
(closes issue ASTERISK-21173)
Reported by: Torrey Searle
Patches:
realtime_sql.patch Torrey Searle (license 5334)
asterisk-21173-update-ip-fields.diff Michael L. Young (license 5026)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@382939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-17888, the AMI Registry event during SIP registrations was supposed
to include the Username field. Somehow, one of the events was missed. This
patch corrects that - the Username field should be included in all AMI Registry
events involving SIP registrations.
(issue ASTERISK-17888)
(closes issue ASTERISK-21201)
Reported by: Dmitriy Serov
patches:
chan_sip.c.diff uploaded by Dmitriy Serov (license 6479)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@382847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The 'A' and 'n' options for Page() mention that the announcement will
be played simultaneously. This is not necessarily the case.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@382513 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A deadlock can occur in chan_iax2 when it attempts to set the caller ID, as it
already holds the iax2 private lock and improperly fails to obtain the channel
lock before calling ast_set_callerid. By not safely obtaining the channel lock,
a locking inversion can take place, causing a deadlock.
This patch solves this by calling the required deadlock avoidance functions
that obtain the channel lock before setting the caller ID.
Thanks to Pavel for fixing my syntax errors and testing this patch out.
(closes issue ASTERISK-21128)
Reported by: Pavel Troller
Tested by: Pavel Troller
patches:
ASTERISK-21128-1.8.diff uploaded by mjordan (license 6283)
ASTERISK-21128-modified-1.8.diff uploaded by Pavel Troller (license 6302)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@382233 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some channel drivers, specifically those that have a varying rate in the
number of audio samples, the audio quality for a MeetMe conference can be
exceedingly poor. This is due to a unilateral application of the DENOISE
function in func_speex to channels joining the conference.
The denoiser function in the speex library is initialized with the number of
audio samples in each sample that will be provided to it. If the number of
audio samples changes, the denoiser has to be thrown away and re-initialized.
While this could be worked around by removing func_speex, that doesn't help
if you actually use the denoiser with other channels on the system.
This patches does the following:
* Checks for the presence of func_speex as opposed to codec_speex when
determining if the DENOISE function is present (which is where the function
is actually implemented)
* Adds an option to MeetMe 'n' that causes the denoiser to not be applied
to a channel when it joins. This keeps the current behavior the default, but
let's users disable the denoiser if it causes problems on their system.
Review: https://reviewboard.asterisk.org/r/2358
(closes issue AST-1062)
Reported by: Thomas Arimont
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@382227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As of r380520 the configure scripts converts the value of linux-gnueabi*
of OSARCH to "linux-gnu". So no point in testing for those values.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@382087 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were several problems using variadic argument macros in res_config_mysql.
* Improper use of va_end. Multiple calls to va_end were possible resulting in
an unbalanced matching of va_start/va_end.
* Calls to va_arg after a possible encounter of a SENTINEL value.
This patch corrects those errors.
(closes issue ASTERISK-19451)
Reported by: wdoekes
patches:
ASTERISK-19451-1.8--2.diff uploaded by wdoekes (License 5674)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@382021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Somehow, chan_jingle has managed to operate for years without setting the
sin_family on its bindaddr socket. This patch properly sets the field during
initial module load to AF_INET.
Note that the patch on the issue was modified slightly to change the
initialization of the socket from allocation of a chan_jingle private to the
module initialization, as the bindaddr object (which is static) only needs to
have the address set once.
(closes issue ASTERISK-19341)
Reported by: andre valentin
patches:
0105-chan_jingle.patch uploaded by avalentin (License 6064)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@381975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When converting AMI class authorizations to a string representation, the
method always appends the ALL class authorization. This is especially
important for events, as they should always communicate that class
authorization - even if the event itself does not specify ALL as a class
authorization for itself. (Events have always assumed that the ALL class
authorization is implied when they are raised)
Unfortunately, this did mean that specifying a user with restricted class
authorizations would show up in the 'manager show user' CLI command as
having the ALL class authorization.
Rather then modifying the existing string manipulation function, this patch
adds a function that will only return a string if the field being compared
explicitly matches class authorization field it is being compared against.
This prevents ALL from being returned unless it is actually specified for
the user.
(closes issue ASTERISK-20397)
Reported by: Johan Wilfer
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@381939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ParkAndAnnounce application documentation for the optional return_context
parameter states the following:
return_context
The goto-style label to jump the call back into after timeout. Default
'priority+1'.
Unfortunately, the application was sending the channel back into the dialplan
at 'priority', which is the ParkAndAnnounce application call. This causes an
infinite loop of the channel constantly being parked, announced, timed out,
parked, announced, timed out... while fun, especially for those callers you
wish to drive to the end of madness, this was not the intent of the
application.
(closes issue ASTERISK-20113)
Reported by: serginuez
patches:
app_parkandannounce.diff uploaded by serginuez (License 6405)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@381916 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk was a little too pro-active in claiming that it found launchd. On
systems without launchd - such as FreeBSD - this resulted in certain items
in Asterisk that conflict with launchd to not be selectable, such as
res_timing_kqueue.
(closes issue ASTERISK-20749)
Reported by: Oleg Baranov
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@381847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The incorrect callid was being written to the "data1" field in queue_log table
for transfer events. The callid of the queue was being written instead of the
transfer target's callid. This now gets the correct "transfer to" number and
places that in the "data1" field of the queue_log table when a transfer event
is triggered.
(closes issue ASTERISK-19960)
Reported by: vladimir shmagin
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@381770 65c4cc65-6c06-0410-ace0-fbb531ad65f3
