If a channel involved in a bridge was using SLIN audio, then translation
paths were not guaranteed to be set up properly since in all likelihood
the number of translation steps was only 1.
This patch enforces the transcode_via_slin behavior if transcode_via_slin
or generic_plc is enabled and one of the formats to make compatible is
SLIN.
AST-352
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@278618 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For SIP channels configured with the progressinband option on, the ringback was
being immediately stopped. This problem was due to ast_prod being moved for a
deadlock fix in 259858. Prodding the channel after setting up the generator
triggered the check in ast_write to stop the generator. The fix here should
write the frame the same as was done before the call to ast_prod was moved.
(closes issue #17372)
Reported by: tech_admin
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@275665 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If memory allocation fails in ast_strdup(), don't return a partially
initialized datastore. Bad things may happen.
(related to ABE-2415)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@273565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The issue here was that the frame created when adjusting for PLC had no offset
to its audio data. If this frame were translated to another format prior to
being sent out an RTP socket, all went well because the translation code would
put an appropriate offset into the frame. However, if the SLIN audio were not
translated before being sent out the RTP socket, bad things would happen.
Specifically, the ast_rtp_raw_write makes the assumption that the frame has
at least enough of an offset that it can accommodate an RTP header. This was
not the case. As such, data was being written prior to the allocation, likely
corrupting the data the memory allocator had written. Thus when the time came
to free the data, all hell broke loose. ....Well, Asterisk crashed at least.
The fix was just what one would expect. Offset the data in the frame by a reasonable
amount. The method I used is a bit odd since the data in the frame is 16 bit integers
and not bytes. I left a big ol' comment about it. This can be improved on if someone
is interested. I was more interested in getting the crash resolved.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@269821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard
Background:
A Digium customer discovered a somewhat odd bug. The setup is that parties A
and B are bridged, and party A places party B on hold. While party B is
listening to hold music, he mashes a bunch of DTMF. Party A takes party
B off hold while this is happening, but party B continues to hear hold
music. I could reproduce this about 1 in 5 times.
The issue:
When DTMF features are enabled and a user presses keys, the channel that
the DTMF is streamed to is placed in an ast_safe_sleep for 100 ms, the
duration of the emulated tone. If an AST_CONTROL_UNHOLD frame is read
from the channel during the sleep, the frame is dropped. Thus the
unhold indication is never made to the channel that was originally placed
on hold.
The fix:
Originally, I discussed with Kevin possible ways of fixing the specific
problem reported. However, we determined that the same type of problem
could happen in other situations where ast_safe_sleep() is used. Using
autoservice as a model, I modified ast_safe_sleep_conditional() to
defer specific frame types so they can be re-queued once the sleep has
finished. I made a common function for determining if a frame should
be deferred so that there are not two identical switch blocks to
maintain.
Review: https://reviewboard.asterisk.org/r/674/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@264996 65c4cc65-6c06-0410-ace0-fbb531ad65f3
dahdi_compat.h was not being included in channel.c when used with
Zaptel and wasn't in file.c at all.
(closes issue #15250)
Reported by: mneuhauser
Patches:
dahdi_compat.patch uploaded by mneuhauser (license 425)
Tested by: IgorG
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@263112 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Issue_1.
In the local_hangup() 3 locks must be held at the same time... pvt, pvt->chan,
and pvt->owner. Proper deadlock avoidance is done when the channel to hangup
is the outbound chan_local channel, but when it is not the outbound channel we
have an issue... We attempt to do deadlock avoidance only on the tech pvt, when
both the tech pvt and the pvt->owner are locked coming into that loop. By
never giving up the pvt->owner channel deadlock avoidance is not entirely possible.
This patch resolves that by doing deadlock avoidance on both the pvt->owner and the pvt
when trying to get the pvt->chan lock.
Issue_2.
ast_prod() is used in ast_activate_generator() to queue a frame on the channel
and make the channel's read function get called. This function is used in
ast_activate_generator() while the channel is locked, which mean's the channel
will have a lock both from the generator code and the frame_queue code by the
time it gets to chan_local.c's local_queue_frame code... local_queue_frame
contains some of the same crazy deadlock avoidance that local_hangup requires,
and this recursive lock prevents that deadlock avoidance from happening correctly.
This patch removes ast_prod() from the channel lock so only one lock is held during
the local_queue_frame function.
(closes issue #17185)
Reported by: schmoozecom
Patches:
issue_17185_v1.diff uploaded by dvossel (license 671)
issue_17185_v2.diff uploaded by dvossel (license 671)
Tested by: schmoozecom, GameGamer43
Review: https://reviewboard.asterisk.org/r/631/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@259858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
No Newchannel manager event will be fired for channels that are
allocated to not match a registered technology type. Thus bogus
channels allocated solely for variable substitution or CDR
operations do not result in a Newchannel event.
(closes issue #16957)
Reported by: atis
Review: https://reviewboard.asterisk.org/r/601
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@259018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows a CDR record previously marked with disposition ANSWERED to be set as BUSY or NO ANSWER.
Additionally this change partially reverts r235635 and does not set the AST_CDR_FLAG_ORIGINATED flag on CDRs generated from ast_call(). To preserve proper CDR behavior, the AST_CDR_FLAG_DIALED flag is now cleared from all brige CDRs in ast_bridge_call().
(closes issue #16797)
Reported by: VarnishedOtter
Tested by: mnicholson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@258670 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This can be guaranteed by forcing the ABI to no longer change when these compiler flags are set.
An unfortunate side-effect to this is that there is an ABI change here. However, there is some
mitigation. Existing modules *will* fail to load since they would require functions that no
longer exist.
Review: https://reviewboard.asterisk.org/r/508/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@254046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r252089 | twilson | 2010-03-12 16:04:51 -0600 (Fri, 12 Mar 2010) | 20 lines
Only change the RTP ssrc when we see that it has changed
This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@252175 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On channel destruction the channel's datastores are removed and
destroyed. Since there are public API calls to find and remove
datastores on a channel, a lock should be held whenever datastores are
removed and destroyed. This resolves a crash caused by a race
condition in app_chanspy.c.
(closes issue #16678)
Reported by: tim_ringenbach
Patches:
datastore_destroy_race.diff uploaded by tim ringenbach (license 540)
Tested by: dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@246545 65c4cc65-6c06-0410-ace0-fbb531ad65f3
asterisk.conf's 'transmit_silence' option existed before
this patch, but was limited to only generating silence
while recording and sending DTMF. Now enabling the
transmit_silence option generates silence during wait
times as well.
To achieve this, ast_safe_sleep has been modified to
generate silence anytime no other generators are present
and transmit_silence is enabled. Wait apps not using
ast_safe_sleep now generate silence when transmit_silence
is enabled as well.
(closes issue 0016524)
Reported by: kobaz
(closes issue 0016523)
Reported by: kobaz
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/456/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@239718 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is simple in that it reorders the disposition defines so that the fix
for issue 12946 works properly (the default CDR disposition was changed to
AST_CDR_NOANSWER). Also, the AST_CDR_FLAG_ORIGINATED flag was set in ast_call to
ensure all CDR records are written.
The side effects of CDR changes are scary, so I'm documenting the test cases
performed to attempt to catch any regressions. The following tests were all
performed using 1.4 rev 195881 vs head (235571) + patch:
A calls B
C calls B (busy)
Hangup C
Hangup A
(Both SIP and features)
A calls B
A blind transfers to C
Hangup C
(Both SIP and features)
A calls B
A attended transfers to C
Hangup C
A calls B
A attended transfers to C (SIP)
C blind transfers to A (features)
Hangup A
All of the test scenario CDRs matched.
The following tests were performed just with the patch to ensure proper operation
(with unanswered=yes):
exten =>s,1,Answer
exten =>s,n,ResetCDR(w)
exten =>s,n,ResetCDR(w)
exten =>s,1,ResetCDR(w)
exten =>s,n,ResetCDR(w)
(closes issue #16180)
Reported by: aatef
Patches:
bug16180.patch uploaded by jpeeler (license 325)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@235635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This code was added for helping to debug the source of invalid HOLD frames.
However, a side effect of this is that it will incorrectly report errors for
frames that have an integer payload. Make the check for this block specific
to the HOLD frame case.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@233092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The crash was happening as a result of a frame containing an invalid data
pointer, but was set with data length of zero. The few times the issue was
reproduced it _seemed_ that the frame was queued properly, that is the data
pointer was set to NULL. I never could reproduce the crash so as a last resort
the crash has been fixed, but a check in __ast_read has been added to give as
much information about the source of problematic frames in the future.
(closes issue #16058)
Reported by: atis
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@231911 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After writing to the audiohook list in ast_write(), frames
were being freed incorrectly. Under certain conditions this
resulted in a double free crash.
(closes issue #16133)
Reported by: wetwired
(closes issue #16045)
Reported by: bluecrow76
Patches:
issue16045.diff uploaded by dvossel (license 671)
Tested by: bluecrow76, dvossel, habile
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@228692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fix may potentially cause problems with CDR backends that access the channel a CDR is associated with via the channel list. This fix makes the channel unavabile at the time when the CDR backend is invoked. This has been documented in include/asterisk/cdr.h.
(closes issue #15316)
Reported by: vmarrone
Tested by: mnicholson
Review: https://reviewboard.asterisk.org/r/362/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@219136 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We have kept this comment around long enough, that it's pretty clear that we're
keeping the code, because changing the code would require a pretty fundamental
architectural shift. We've also taken criticism in some quarters, because it
was believed that it was referring to the code being nasty. No, the code isn't
nasty, just the operation itself is rather odd. Fixed for eternity (probably
not).
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@214701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_write(), if a channel has a list of audiohooks, those
lists are written to and the resulting frame is what ast_write()
should continue with. The problem was the returned audiohook frame
was not being handled at all, and the original frame passed
into it did not contain the mixed audio, so essentially audio
was being lost. One result of this was chan_spy's whisper
mode no longer worked. To complicate the issue, frames
passed into ast_write may either be a single frame, or a list
of frames. So, as the list of frames is processed in the
audiohook_write, the returned frames had to be added to a new
list.
(closes issue #15660)
Reported by: corruptor
Tested by: dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@214194 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I changed this check to only happen in a dev-mode build. I also added a
comment explaining what is going on. I also made it so that detection of
this situation does not affect ast_read() operation.
(closes issue #14723)
Reported by: seadweller
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@207360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is possible for datastore fixup functions to remove the datastore from the list
and free it. In particular, the queue_transfer_fixup in app_queue does this. While
I don't yet know of this causing any crashes, it certainly could.
Found while discussing a separate issue with Brian Degenhardt.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@201450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are various media paths in Asterisk (codec translators and UDPTL, primarily)
that can generate more than one frame to be generated when the application calling
them expects only a single frame. This patch addresses a number of those cases,
at least the primary ones to solve the known problems. In addition it removes the
broken TRACE_FRAMES support, fixes a number of bugs in various frame-related API
functions, and cleans up various code paths affected by these changes.
https://reviewboard.asterisk.org/r/175/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@200991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The function ast_call_forward() forwards a call to an extension specified in an ast_channel's call_forward string. After an ast_channel is called, if the channel's call_forward string is set this function can be used to forward the call to a new channel and terminate the original one. I have included this api call in both channel.c's ast_request_and_dial() and res_feature.c's feature_request_and_dial(). App_dial and app_queue already contain call forward logic specific for their application and options.
(closes issue #13630)
Reported by: festr
Review: https://reviewboard.asterisk.org/r/271/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@198891 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change also involves the addition of an AST_CDR_FLAG_ORIGINATED flag that is used on originated channels to distinguish: them from dialed channels.
(closes issue #12946)
Reported by: meral
Patches:
null-cdr2.diff uploaded by mnicholson (license 96)
Tested by: mnicholson, dbrooks
(closes issue #15122)
Reported by: sum
Tested by: sum
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@198068 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The bridge was terminating immediately after the attended transfer was
completed. The problem was because upon reentering ast_channel_bridge
nexteventts was checked to see if it was set and if so could possibly
return AST_BRIDGE_COMPLETE.
(closes issue #15183)
Reported by: andrebarbosa
Tested by: andrebarbosa, tootai, loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@197124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the case that we could not remove the desired channel from the
list of channels, there was an extra call to unlock the channel list.
Since we unlock the list later on in the function anyway, this results
in the list being unlocked twice yet only being locked once.
(closes issue #15098)
Reported by: tim_ringenbach
Patches:
remove_extra_unlock.diff uploaded by tim (license 540)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.4@194356 65c4cc65-6c06-0410-ace0-fbb531ad65f3
