The fax_detect_framehook() has the potential to deadlock if an incoming
fax happens during the Playback or similar application.
* Fixed the potential deadlock by not calling ast_async_goto() with the
channel lock held.
* Made always eat the fax detection frame whether there is a fax extension
or not.
* Made only detach the framehook if we detected a fax and not on other
possible frames.
ASTERISK-26216
Reported by: Richard Mudgett
Change-Id: I99da35c26d1cd802626ffb4c1b4eb5b015581b6d
The fax detection timeout option did not work because basically the wrong
variable was checked in fax_detect_framehook(). As a result, the timer
would timeout immediately and disable fax detection.
* Fixed ignoring negative timeout values. We'd complain and then go right
on using the negative value.
* Fixed destroy_faxdetect() in the off-nominal case of an incomplete
object creation.
* Added more range checking to FAXOPT(gateway) timeout parameter.
ASTERISK-26214 #close
Reported by: Richard Mudgett
Change-Id: Idc5e698dfe33572de9840bc68cd9fc043cbad976
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
If AST_TEST_DEFINE is not conditional to TEST_FRAMEWORK it produces dead
code. This places all existing unit tests into a conditional block if
they weren't already.
ASTERISK-26211 #close
Change-Id: I8ef83ee11cbc991b07b7a37ecb41433e8c734686
With this change, the initial RTP sequence number is randomly chosen not between
0 and 65535 (0xffff) but 0 and 32767 (0x7fff). This assures, the roll-over
counter (ROC) synchronization is not lost for sRTP, when the very first RTP
packets get lost; see http://srtp.sourceforge.net/faq.html#Q6
ASTERISK-26207 #close
Change-Id: I9a527e3aa3ce8f3becc5131d7ba32b57b5845464
The function create_mwi_subscriptions_for_endpoint checks
if there is active contacts by retrieving aors and contacts.
This function is used to create all unsolicited mwi subscriptions
on startup and is used when contact added.
In both cases it's not necessary to check if there are contacts.
The contacts are needed when asterisk sends mwi.
ASTERISK-26200 #close
Change-Id: I98e43bdc97f3c0829951cd9bf5f3c6348c6ac1fa
This commit adds scaffolding in order to support the SILK audio format
on calls. Roughly, this is what is added:
* Cached silk formats. One for each possible sample rate.
* ast_codec structures for each possible sample rate.
* RTP payload mappings for "SILK".
In addition, this change overhauls the res_format_attr_silk file in the
following ways:
* The "samplerate" attribute is scrapped. That's native to the format.
* There are far more checks to ensure that attributes have been
allocated before attempting to reference them.
* We do not SDP fmtp lines for attributes set to 0.
These changes make way to be able to install a codec_silk module and
have it actually work. It also should allow for passthrough silk calls
in Asterisk.
Change-Id: Ieeb39c95a9fecc9246bcfd3c45a6c9b51c59380e
Since July 2014, TLS based protocols (SIP over TLS, Secure WebSockets, HTTPS)
support PFS thanks to ASTERISK-23905. In July 2015, the same feature was added
for DTLS. The source code from main/tcptls.c should have been re-used to ease
security audits. Therefore, this change rolls back the change from July 2015 and
re-uses the code from July 2014. This has the additional benefits to work under
CentOS 7 and enabling not just ECDHE but DHE based cipher suites as well.
ASTERISK-25659 #close
Reported by: StefanEng86, urbaniak, pay123
Tested by: sarumjanuch, traud
patches:
res_rtp_asterisk.patch submitted by sarumjanuch
dtls_centos_step_1.patch submitted by traud
dtls_centos_step_2.patch submitted by traud
Change-Id: I537cadf4421f092a613146b230f2c0ee1be28d5c
aor_observer_deleted() needs to operate on all contacts found for the
deleted AOR instead of only the first one found. This is really only a
problem if there is more than one contact for the AOR.
Change-Id: Id24ac0d5e8c931330231fb45dd2a331a84339dc1
* Fix some whitespace in various routines.
* Rename i to iter in persistent_endpoint_update_state().
* Fix off-nominal copy/paste message wording in
persistent_endpoint_contact_deleted_observer()
Change-Id: Id8e34f5d09e7eebac3af22501c44c1110a3e29d8
The ASTERISK-25904 change-id I8fad8aae9305481469c38d2146e1ba3a56d3108f
patch introduced several regressions when the newly created "Updated"
state goes out for each endpoint registration refresh.
1) It restarted any OPTIONS RTT ping cycle.
2) It would interfere with a currently active ping and throw off that
ping's resulting RTT calculation.
3) It cleared the RTT time each time the endpoint was refreshed.
4) The cleared RTT time was sent out as a statsd update each time.
5) It created two AMI events for each update.
* Revert the original patch and reimplement it. Now the current contact
status state is re-sent instead of the state being momentarily toggled
every time the endpoint refreshes its registration. The statsd events are
not created for the re-sent refresh because they are sent after every
OPTIONS ping.
ASTERISK-26160 #close
Reported by: Matt Jordan
Change-Id: Ie072be790fbb2a8f5c1c874266e4143fa31f66d1
The func_odbc module was modified to ensure that the
previous behavior of using a single database connection
was maintained. This was done by getting a single database
connection and holding on to it. With the new multiple
connection support in res_odbc this will actually starve
every other thread from getting access to the database as
it also maintains the previous behavior of having only
a single database connection.
This change disables the func_odbc specific behavior if
the res_odbc module is running with only a single database
connection active. The connection is only kept for the
duration of the request.
ASTERISK-26177 #close
Change-Id: I9bdbd8a300fb3233877735ad3fd07bce38115b7f
When using TCP transport with chan_pjsip, the TCP_NODELAY
option value was allocated on the stack, then passed as a
pointer to the tcp transport configuration structure, and
later re-used on subsequently created sockets when it was
no longer valid. This patch changes the allocation to be
a static.
ASTERISK-26180 #close
Reported by: Scott Griepentrog
Change-Id: I3251164c7f710dbdab031282f00e30a9770626a0
Some T.38 implementations may send another re-invite after the initial
one which adds additional negotiation details (such as the max bitrate).
Currently this will fail when passthrough is being done in chan_sip as we
do nothing if T.38 is already active.
Other handlers of T.38 inside of Asterisk (such as res_fax) handle this
scenario so this change adds support for it to chan_sip and res_pjsip_t38.
If a request to negotiate is received while T.38 is already enabled a
new re-INVITE is sent and negotiation is done again.
ASTERISK-26179 #close
Change-Id: I0298494d3da6df3219bbfa4be9aa04015043145c
If the SQL UPDATE statement changes nothing then SQLRowCount returns 0.
This value should be treated as success.
But the function sorcery_realtime_update treats it as failed.
This bug was found using stress tests on PJSIP.
If there are 2 consecutive SIP REGISTER requests with the same contact data
during 1 second then res_pjsip_registrar adds contact location on 1st request
and tries to update contact location on 2nd.
The update fails and res_pjsip_registrar even removes correct contact location.
The test "object_update_uncreated" was removed from test_sorcery_realtime.c
because it's now a valid situation.
This patch also adds missing debug of extra SQL parameter.
ASTERISK-26172 #close
Change-Id: I05a7f3051455336c9dda29efc229decf86071303
It is possible in a hypothetical situation for a session refresh to be
invoked on a PJSIP when the negotiatior on the INVITE session has not
yet been established. While this shouldn't occur with existing uses of
ast_sip_session_refresh, the crashes that occur due to improperly
calling PJSIP functions that expect a non-NULL negotiatior are
avoidable. PJSIP will create the negotiator in pjsip_inv_reinvite; this
means that simply checking for the presence of the negotiator before
passing it to other PJSIP functions that use it is allowable. As such,
this patch adds checks for the presence of the negotiator before calling
PJSIP functions that assume it is non-NULL.
Change-Id: I1028323e7e01b0a531865e5412a71b6f6ec4276d
When something very sad and wrong occurs, it's challenging sometimes to
figure out why. This patch adds some additional debug statements on
off-nominal paths to try and make debugging easier.
Change-Id: I7bffb73cc733b6f80193a23340881db4a102b640
When res_corosync detects that a node leaves or joins, it currently is
informed of this via Corosync callbacks. However, there are a few
limitations with the information presented:
(1) While we have information that Corosync is aware of - such as the
Corosync nodeid - that information is really only useful inside of
Corosync or res_corosync. There's no way to translate a Corosync
nodeid to some other internally useful unique identifier for the
Asterisk instance that just joined or left the cluster.
(2) While res_corosync is notified of the instance joining or leaving
the cluster, it has no mechanism to inform the Asterisk core or
other modules of this event. This limits the usefulness of res_corosync
as a heartbeat mechanism for other modules.
This patch addresses both issues.
First, it adds the notion of a cluster discovery message both within the
Stasis message bus, as well as the binary event messages that
res_corosync uses to transmit data back and forth within the cluster.
When Asterisk joins the cluster, it sends a discovery message to the other
nodes in the cluster, which correlates the Corosync nodeid along with
the Asterisk EID. res_corosync now maintains a hash of Corosync nodeids
to Asterisk EIDs, such that it can map changes in cluster state with the
Asterisk instance that has that nodeid. Likewise, when an Asterisk
instance receives a discovery message from a node in the cluster, it now
sends its own discovery message back to the originating node with the
local Asterisk EID. This lets Asterisk instances within the cluster
build a complete picture of the other Asterisk instances within the
cluster.
Second, it publishes the discovery messages onto the Stasis message bus.
Said messages are published whenever a node joins or leaves the cluster.
Interested modules can subscribe for the ast_cluster_discovery_type()
message under the ast_system_topic() and be notified when changes in
cluster state occur.
Change-Id: I9015f418d6ae7f47e4994e04e18948df4d49b465
If specified, incoming SUBSCRIBE requests will be searched for the matching
extension in the indicated context. If no "subscribe_context" is specified,
then the "context" setting is used.
ASTERISK-25471 #close
Change-Id: I3fb7a15f5bc154079bd348c08b7ad1cdd2d5e514
When an answer SDP is invalid we were disconnecting the outgoing call and
sending two BYE requests. The first BYE was sent by PJPROJECT because of
the invalid SDP answer. The second BYE was sent by Asterisk because it
thought the canceled call was the result of the RFC5407 section 3.1.2 race
condition.
* Made not send the BYE on a canceled session if the SDP negotiation is
incomplete because PJPROJECT has already sent a BYE for the failed
negotiation.
ASTERISK-25772 #close
Reported by: Dmitriy Serov
Change-Id: I44ad0bd0605e8eeb7035c890d6f97a1331f1a836
When an incoming call defers SDP negotiation and then sends us an invalid
SDP in the ACK, we need to send a BYE to disconnect the call. In this
case SDP negotiation has failed and we don't have valid media streams
negotiated.
ASTERISK-25772
Change-Id: Ia358516b0fc1e6c4c139b78246f10b9da7a2dfb8
Registering the PJMEDIA error codes allows errors found when parsing an
incoming SDP to be easier to figure out.
"Missing SDP rtpmap for dynamic payload type (PJMEDIA_SDP_EMISSINGRTPMAP)"
is much easier to understand than "Unknown error 220030".
ASTERISK-25772
Change-Id: I44b2dcea656fedd7593171be9e845880a2c70ca0
pjsip_inv_end_session() is documented as being able to return the
passed in tdata parameter set to NULL on success.
Change-Id: I09d53725c49b7183c41bfa1be3ff225f3a8d3047
This change removes hardcoded SDP parsing and generation for
Siren7 and Siren14 from chan_sip and moves it to format attribute
modules so it can also be used by chan_pjsip.
With this the fmtp lines for both are added with the bitrate
information.
ASTERISK-26021
Change-Id: Ibb004eda37a14c0a35ef0613f6237977fc800037
fax_v21_session_new created a session details object but only released
the allocation reference during error conditions. fax_session_new adds
it's own reference to details if needed so the caller is always
responsible for cleaning it's own reference.
ASTERISK-26141 #close
Change-Id: Ie7fc52a83b6596ce9ce2d5a2bd9f3e204f48fc88
gcc 6 caught a previously unidentified self-comparison in
ice_candidate_cmp. Fixed it and re-ordered the predicates for better
short-circuiting.
ASTERISK-26140 #close
Change-Id: I3da713c568e24064430257b3502fbdafd35af7a7
